E1200 Playstation 3 Help!

Similar Questions

• Help to see the pictures on my Playstation Portable

  The President complied,

  I have a Playstation Portable and I have problems with the display picture that I store above. ICAN see them on my laptop (Dell Vostro) but not on the PSP system. I had the same problem in the past with songs, that was sloved when I formatted my memory stick (Sony 2 GB) and then made records for my songs. I tried the same thing even for this, but I was no help. Photo is also visible when I attach my memory stick to a camera and click on the top picture. How can I solve this problem?

  Hello Rahul,
  Welcome to the community of Sony.

  PlayStation support have their own separate forums and are therefore better qualified to deal with problems or questions you may have on the PlayStation products and games and devices. Here is the link:

  http://community.us.PlayStation.com

  Kind regards
  Shaun.

• QUESTION of HANDSHAKING ULTIMATE PLAYSTATION 3 WITH SONY TV (help)

  Good guys & gals, have a crack at it. I very much hope that one of you knows how to solve this problem. I've owned a 60 GB Playstation 3 since 2006-2007ish. When I bought it I was not the owner of a HD TV and played SD (standard definition). But played very little at a time. Obviously if I wouldn't have known about future issues, I would have picked up the ps3 at the time. Fast forward to mid-2008, I work at best buy in Home Theater and the SONY XBR4 out. I sell the crap out of the TV, because supposedly it is the best HDTV on the market at that time. I end up buying a (40 inch Sony XBR4) at the same time. Now for my problem...

  Just to throw out on the table before I start, I tried everything I can think of. I spent countless hours on the internet, forums, YouTube, trying to find people with similar problems, or even people with different problems in the hope of finding a solution that would work. I called Sony 3 separate times and talked to people who barely speak English, and they all tell me to try the same things I've already tried... Here's what I tried...

  1.) first of all, my Xbox 360 works fine - it is out of cable box HDMI in my television. Perfect unity of games Microsoft HD 1080 p + Telvision Sony = HD works well. Funny actually. Let me add, that the Xbox 360 works very well to ALL HDMI port on TV. All 3. Then unburnt HDMI port on the TV.

  2.) second, my Playstation 3 is not working/handshake / connect via serperate OR same HDMI cable in my television. No. 1080 p either. It does not work in one of the 3 HDMI ports on the TV. However, the cables provided with the ps3 (red, white, and yellow) work very well. 3.) my buddies the same 60 GB Playstation 3 connects to my TV, through the same HDMI cable (I have several cables and even tried the Xbox cable included) and works absolutely perfect. So then who leave television out of the question, that could be the problem.

  4.) next, I thought of course that maybe my PS3 has a bad hdmi port. So I brought my Samsung HDTV parents down and kicked it with my Playstation 3 and tv recognized the my Playstation 3 right now and I was playing in HD on their TV very well.

  Many people at this point, would probably ask, "well when you had your red, white, and yellow cables, are you in the playstation 3 parameters (the hdmi cable connected to tv as well) and to try and switch to hdmi 1080 p mode? ' and answer this question simply, Yes and YES. I tried this many times.

  5.) I tried all options on television as much as to try to make sure he would take the ps3, I tried every possible on the playstation 3 to option that it could display on television. Whenever I turn the playstation 3-screen 1080 p HDMI is empty, and I wait 30 seconds so that it is shown again in SD.

  Here are some of the other things I've tried, and what Sony has suggested:

  6.) unplug everything (TV, Playstation 3, HDMI cables) wait a few minutes so that everything be not fed, not connected, disconnected and reconnected everything back in. Nothing, of course.

  7.) now the button of reset for several beeps, and the playstation 3 to come to a menu with 6 options (it's been a few months that I even turned on the stupid thing so I don't remember all the options), but I tried pretty much all possible options in this menu. In my view, it was as if restore the ps3 is by default... still nothing.

  8.), I tried to format the playstation 3, did nothing.

  9.) I have tried to update than the playstation 3 to the latest filmware upgrade, yet have nothing in HD.

  10.) I tried several HDMI cables and all ports on TV.

  I think I tried on 10-20 more things, I forget at the moment. I should have posted long ago, but I spent a few days doing nothing but the search for a cure for this, or physically to play with all the options between the TV and the ps3 and have never found a solution. I usually give up after a few days of trying really hard and come back months later. There is no way to enjoy a Playstation 3. I'm a big fan of Sony, and it's very disappointing. I have a bunch of Playstation 3 games, I want to play bad, but I don't want to play any of them until I can play in HD this IS THE REASON I BOUGHT THE CRAPPY SONY TV, SPECIFICALY for MY PS3, lol.

  So here are the facts in simple terms. My PS3 - HDMI - MY SONY TV = does not work... My XBOX360 MY SONY TV = - HDMI - works great! ......
  Friends the same PS3 - HDMI - MY SONY TV = works great!...
  My PS3 - HDMI - SAMSUNG DIFFERENT TV = works great!

  Several cables HDMI = work only
  Try different HDMI ports on the TV = wont ' work
  = Factory settings restore does not work
  Reformatting = does not work
  Unplugging everything & waiting = work only
  Just after connecting the HDMI cable & turn on PS3 = work only
  Upgrade to the latest filmware ps3 = nothing - does not work

  I don't understand, I can repeat myself, but this was VERY frustrating, and Sony is not help. Now the PS3's long warranty I know, and I don't know if Sony is going to do anything. Everything they have done so far is gave me a confirmation code, to give to someone else. I spend a lot of time waiting, and I'm tired of talking to the guy who barely speak English. My final thoughts, before you click on send, what are it's probably some sort of handshake problem. Of course my TV and playstation both work nice work on Matt opposing separate. It's funny how the 2 sony products are those who have problems, and my opponent (xbox) product works quite well. The only other thing I can think of is a possible upgrade to the TV (see if sony has updated filmware for my build of television.) if someone is smart enough to take a crack at this, and you have to make dates and stuff, I take a look. I hope that someone has had the same problem and found a solution, because I've exhausted all the options that I see, and I like to consider myself a person with a fairly good knowledge on the technology.

  I would be absolutely more than grateful for someone who can solve this puzzle.

  -Bradford

  Hello Bradford,
  If you have tested HDTV with another device like a Blu Ray player or cable box, press the power button. If he goes out either device then control HDMI turns and handshake is underway.

  Even if it works with another brand television, try the following steps on the Playstation website.
  http://us.PlayStation.com/support/answe... m? A_ID = 262

  Finally, if this doesn't help not here's the link to the forums Playstation, your request will get users of Playstation of entry, as this forum is mainly for electronics consumer and VAIO.
  http://community.us.PlayStation.com/index.jspa

• Need help Configureing Netgear router so I can connect to Playstation Network.

  My playstation 3 says "Failure of Type NAT" and will not sign into the playstation network. I have a router Netgrear that connect PS3 to Internet, but times out when you try to connect to the PS network. How can I configure the router? I use a wired connection.

  Hello

  I suggest you to contact the manufacturer of the playstation for assistance on this issue.

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Need help with internet access on a Linksys E1200 strategy

  Hi, I have an a Linksys E1200 (Firmware Version: 2.0.01), and September 13, 2012, I configured the Internet access policy to deny access to internet for 4 devices between the hours of 22:00 and 08:00 on the evening of the school.)  It was working fine! I was very pleased.

  Over the last weekend, the electricity was launched for a second, the power was back on in 2-3 seconds if. The router comes back online, and everything seemed in excellent working condition. Then Sunday evening (considered to be a night of school in our House) at 22:00 the router did not refuse Internet 4 devices as it normally did. I logged into the control panel admin via a browser web, and checked access to internet strategies, I configured last week was still configuration property.

  Everything was always configuration property to deny access to the internet for 4 devices Sunday night/Monday morning between 08:00 and 22:00. I checked that the router has the date and time. But the router is not always deny access as it was setup to do. It worked fine before the weekend, and then after the weekend it stopped working the property. The only thing I can think of this month of may of the cause is 2-3 seconds, the power went out then came back on. The router is connected through a surge protection.

  Then I set up the Internt access policy week last to deny access to 4 devices on the night of the school between 22:00 and 08:00. I waited 24 hours to make sure it worked, after that it worked, I got the router send me a backup of the config file. I tried to use it to solve this problem, but it did not help either.

  This is a screenshot of what looks like my Internet access policy. I had to create 2 policies because the router has refused to create a policy where the end time was not later than the start time. Anywho, so political #1 is from 22:00 to 11:55, and policy #2 is from 12: 00 to 08:00. This Internet access policy is configured to deny access to 4 devices between midnight and 08:00 Monday morning. It was working fine last week, so I'm 100% positive that it is the router.

  

  The following screenshot is the status information to show the date and time of the router is correct.

  

  So the router was Monday morning @ 03:00, the router has an active policy of internet access to deny the device access to the internet, the router had recently worked flawlessly to do this, but for some reason any, that he could not do this morning?

  Can you please explain it to me or provide me with free software to "lock" the internet for specified devices. I really want to have to stay until 22:00 5 nights a week, so I can help my daughter sneaking online when she should be in bed. taking his phone and the laptop is not an option.

  Thanks for reading, forward a reply as soon as possible.

  ~ Tony

  Hello. I think that Yes, too, that it is a router problem. Just to isolate it, try to update the firmware and then reset and reconfigure the router again and use the same policies that have worked before. On Cisco's Web site, the latest firmware for version 2 is 2.0.04. You can download it here http://homesupport.cisco.com/en-us/support/routers/E1200. You can use the links below in the public KB site of Cisco.

  Manually upgrading firmware of the Linksys wireless-N Router

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=0a6881b90224439b92c8d8f19ca42e5d_21511.XML&PID=80&...

  Setting up a Linksys router for DSL Internet connection

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=80&VW=1&articleid=3687

  Setting up a Linksys router with cable Internet service

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=80&VW=1&articleid=3686

• help E1200 wired bridge mode? (you call it?)

  Signal from my main router does not reach to the basement in my house. so I was using router E1200 as a secondary router. It was hard wired to the main router and worked very well. Recently, I had to reset E1200 because I forgot the password of the router.  After that, I'm not able to get online either by wire or cable. I am able to get on the router configuration page. Can someone help please how to configure?  My computer tech who installed a router told me I need to download the software but I can't find anything except Cisco connect to installation that has not solved the problem.

  Right. Your router is the connection type of bridge that was the reason I told you in a post previous does not connect to the secondary routers Internet (wan port). To connect to the LAN not Internet port port. LAN to LAN connection.

  In other words, the secondary router has 5 ports on the back. Connect the Ethernet cable to one of them except the Internet port.

• Problems with media sharing of computer for Playstation 3, xbox 360, PLEASE HELP!

  I can't streaming media from my computer to my PS3 and Xbox 360 (media sharing) through her router (Network). I always listen to movies, music, photos etc from my computer on my Playstation 3 but recently the windows icon ceased to appear on PS3 when I turn it on. Also my xbox is telling me that it is unable to connect with my computer. The strange thing is, internet works perfectly fine for everything and I checked my network share settings and my computer has detected two game systems and are both allowed to share media over the network. I just can't understand why (& PS3 Xbox 360) game systems ceased to recognize my computer suddenly but the xbox live and PSN (online games) work very well. All the world had a similar problem and help me?

  Hi Sir Alex,

  Thank you for visiting the Microsoft answers community site. The question you posted corresponds to the XBOX would be better suited to the XBOX Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Forums Xbox - http://forums.xbox.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• With the help of Qosmio G30-201 as a monitor for the connection of the Playstation

  Hello

  I bought a laptop G30-201 that has a video input.
  I am able to use the laptop as a monitor screen to run my Playstation 2 through it?
  Please can you advise how to do this.

  Hello

  I have no playstation, but I was able to watch movies VHS on Qosmio LCD to display when VHS-recorder is connected. Because of that, I think with playstation that there should not be no problem.

  Try to do this:

  Connect your playstation with antenna port
  Start Qosmioplayer and playstation too
  Use option scanning channels

  I'm sure Qosmioplayer find a channel where you can see the photo of the playstation.

  Please let me know if this work.

• Help E1200 NAT!

  I open my NAT for xbox using Port triggering, but I can't open my NAT for the PC because it uses no ports!

  I can't host a game using any MMO game, and I can't host all matches MW3/Black Ops too!

  any help please!

  and thank you!

  You can try to open the ports that are used by these games.

  Go to these games support site and search for port numbers used by these games.

  Assign a static Ip address to your PC. Pass port numbers for the Ip address of your PC,

• can connect my playstation 2 to my pc, so far I have sound but no visual on my monitor

  can connect my playstation 2 to my pc, so far I have sound but no visual on my monitor

  Hello

  You can post the question on the Playstation to support help forums:
  
  http://community.us.PlayStation.com/T5/PlayStation-2/BD-p/22013

• Unable to connect error PlayStation 3: 80130182

  Original title: error code 80130182

  trying to hook my playstaion3 to enternet and it says that it can't read my id address says I have error 80130182 what which is pls help ty

  Hello

  I suggest you to see link below and check if it helps.

  Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices

  If the problem persists then I suggest you contact the PlayStation support.

  Hope this information is useful.

• connection playstation 3 with WMP on windows 7

  Hello

  I use to be able to connect my playstation 3 to my computer wireless when using vista. Have upgraded to windows 7 and am wrong now to connect to the ps3

  I use my ps3 as a media server to the TV for wmp

  Could someone help?

  regards David

  Hi Browie,

  -What exactly happens when you try to connect your PS3 to your computer?

  -Is detected on your computer?

  -You receive an error message when connecting?

  However, you can follow the steps below and check if it helps you connect the playstation 3 on your computer for multimedia streaming.

  Before I continue I suggest you note the MAC address of your Playstation 3

  You can find the MAC address of the PS3 in

  (1) system setting > system information

  (2) network settings. (Scroll down)

  Once you note down the address Mac, then on your computer, go to control panel > network and sharing Center > advance change sharing settings.

  In advance the sharing page settings make sure you discovered the network and file sharing & printer is activated.

  After turning on the network discovery and file sharing & printer, click streaming media options.

  Once you are finished, you will see a window of sharing multimedia files.  In the fall of devices Show bar, select all networks. Then you'll see some unknown device / devices. Double-click each unknown device to see the MAC address of the device.

  If the address matches the MAC address of the PS3 then allow this device for media sharing and check if you are able to connect your Playstation 3 to your computer.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R Microsoft Support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PLAYSTATION 3 and WINDOWS MEDIA PLAYER

  I want to install windows media player on my playstation 3 to be able to watch documentaries online since I don't have the cable to connect my pc to my tv.

  If this is not possible, I was wondering if there is a way to connect the wireless computer to display with threw the playstation3 on the TV console. Thanks for the help

  Hello Kokokos,

  You will need enable the media to share on WMP for sharing with the PS3.  Here are the steps to do so below.   Another option is to install VLC on PS3 and these steps are shown in the link I provided here.
  http://boardsus.PlayStation.com/PlayStation/board/message?board.ID=ps3media&thread.ID=30857

  All you need to do is turn on your ps3.

  have the windows media player 11 is installed.

  In windows media player, go to tools > options > library

  Click on the share button configuration.

  You should see peripheral unknown or Ps3 listed there.

  Click on allow.

  You can play with the settings.

  It's her!

  Back to your ps3 and search for servers!

  I hope this helps you.

  I have a simple philosophy: just assume everyone is a piece of c.r.a.p. and then be pleasantly surprised if you find someone who is not.

• Need help to connect the old Windows XP to new wireless router, please

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  Hello
  I have an old desktop running Windows XP Edition family 2002 version, which has been connected to a Netgear WG311 802.11 wireless router g. I was unable to connect to other computers, so I replaced the Netgear with an E1200 Linksys wireless router. Now, all other computers find the Linksys router, but the older Windows XP desktop will not (because I don't use it to configure the router?).  How to connect your old computer to Windows XP to the new router, please? Thank you very much for your help.
  Walt

  The problem is probably that the Linksys E1200 is a wireless-N Router and your former Office no doubt has a wireless adapter that is only capable of wireless-G (or perhaps Wireless G and B).

  Are adapters wireless in your other computers wireless - n?  If so, it perhaps is the reason why they could not connect to your old G of Netgear wireless router.

  You can get a new wireless-N for the office adapter or configure the E1200 wireless g available.

• E1200 V2 speed

  Hey, I recently bought the E1200 advertised as 300mbit/s, but it is slower than my old WRT54GL. The wireless, I get only 1.5 / 2 MB/s download speed and 6-7 Mbps wired max.  My ISP gives me 100 Mbps in download, about 12 MB/s without the help of the router.

  I'm not an expert imto configuration of routers, but I think that I have disabled anything that might slow down, but no change at all.

  I was getting 3-4 MB/s wireless and 4-5 Mbps wired with the old WRT54GL... something must be wrong here.

  @Redbull, your modem speed is impressive. The speed you get directly to your modem and the speed at which you get connected to your router should be the same or if there is a difference, it should be close to that.  Make sure that WMM is enabled. Sucurity must be set to WPA2 only. You can reflash/update the firmware of your router. See the link here. Manually upgrading the firmware of the WiFi Linksys router or gateway series X