Made my thread of fire of 800 motherboard support? can I put?

Similar Questions

• Satellite Z830 - I wonder if the motherboard supports more than 6 GB of memory

  Hey, I bought a Toshiba Satellite Z830-10w. It's a fine ultrabook.
  I wonder if the motherboard supports more than 6 GB of ddr ram.

  Have some of you tried it with a block of 8 GB of RAM Regand flemming

  > I wonder if the motherboard supports more than 6 GB of ddr ram.

  The chipset is responsible for the RAM
  Therefore, know if the chipset would support the 6 GB of RAM.

  Z830-10w supports the Intel HM65 Express Mobile Chipset and it should support the 8 GB of RAM

  To my knowledge the unit is equipped with a 2 GB internal RAM that is NOT removable.
  You can update ONLY one slot
  So one slot can handle 4 GB of RAM, and in this case the 6 GB of RAM are supported.

• I accidentally made a duplicate on my desktop Cache folder and now I can't put in finder or delete it, running El Capitan

  I accidentally made a duplicate on my desktop Cache folder and now I can't put in finder or delete it, running El Capitan

  Restart your mac, then delete. If not restaet in safeboot in press can pass

• ENVY 15 t-k200: how to find if my 15 t-K200 motherboard supports a backlit keyboard

  I HAVE an ENVY 15 t-k200 AND would like TO KNOW HOW TO find OUT IF MY MOTHERBOARD SUPPORT a BACKLIT KEYBOARD

  Hello

  This isn't a CTO machine so no complete listing available BUT based on the following site, many machines on the same series (15-knnnaa) have backlit keyboard:

  http://support.HP.com/us-en/product/HP-envy-15-K200-notebook-PC-series/7527530/product-info

  I believe that all the machines of the series whlole have mother who sleeps for a backlite keyboard. Why you have not ordered backlit keyboard in the first place?

  Kind regards.

• HP 8300: My motherboard supports 95w TDP?

  Hi people.

  Does anyone know the specs of my motherboard? (The HP Elite 8300).

  I would like to know if it supports a 95w TDP.

  The HP Elite 8300 has a card mother "Hewlett-Packard 3396' and is currently mounted with an i7-3770 (which has a 77 w TDP). I want to set up an i7-2600 (which has a TDP of 95w) - yes I know, I'm crazy.

  In any case, I was wondering if the motherboard supports 95w TDP. Is the same.

  If she does not support, is it possible to change the voltage down or disable a few hearts with this motherboard?

  Thank you.

  (PS - there is no work around or alternative, I can only do what is required above, there is no other CPU I can put in, and no other motherboard, I can get...)

  (EDIT - update question I hope to be a little clearer).

  In the unlikely case where someone else wants to do the same thing as me, I can confirm that the MB supports the TDP 95w - Support HP has managed to let me know that this is the case.

  In all cases, the configuration of the CPU LGA1155 was the same and would have taken (toed), but may have caused a problem with the Mo under load (if drawn enough CPU power protruding the MB supported TDP). This can always be tempered through voltage, but this particular BIOS does not natively allow it - Windows allows to drop the maximum load if it is a problem for you, and other tools of Windows may be able to manipulate your BIOS.

  Insists on CPU, works well, very well.

• After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

  After replacing my motherboard, I can't activate my gunine win 7 with previous assistance from product key.plz

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  You can always try phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 64 bit, asus motherboard that can take 32 gigabytes of ram, windows only see 16

  Windows 7 home 64-bit

  ASUS maximus formula v

  32 GB of ram motherboard that can take

  Windows only using 16?

  Intel 3rd gen I5 3570

  Intel SSD 120

  WD velisaraptor 150

  Upgrading Windows 8 will be Windows 8 Pro, so will support no doubt at least 192 GB. You could wait for that and pay only $39.99.

  http://windowsteamblog.com/Windows/b/bloggingwindows/archive/2012/07/02/upgrade-to-Windows-8-Pro-for-39-99.aspx

• Everytime I open a PDF the reader opens up to 800%. How can I fix to open at 100%?

  Everytime I open a PDF the reader opens up to 800%. How can I fix to open at 100%?

  Preferences | Display of the page. Zoom: 100%.

• HP ENVY PHOENIX 800-060: transfer windows want to 800 motherboard again - 060

  Hello

  I bought this new computer there is a little more than two years and now I tells me that the motherboard and power supply have out crapped on me. We could think of a motherboard should last longer than that, but I digress...

  I would replace the motherboard so that I can save the rest of the computer. Is it possible to transfer my license windows from the old motherboard to the new? Or I have to buy another license?

  Thank you

  Greetings,

  I hope that you back up the important things on several external media and in the cloud until it happened.

  The failure of food fry the HDD/SSD or any other component?

  You can contact HP to service here.

  HP will replace the motherboard and the MB of tattoo. This would allow you to use HP recovery media to bring the system to a factory State. You wouldn't need a new Windows product key.

  Do you make or buy HP recovery discs before this catastrophic event? It appears your PC comes with Win 8.0. Recovery media, you can order here.

  HP will reinstall Win 8.0 if you replace the defective components and tie the mother of replacement HP factory for the chassis number of the system (tattoo).

  If you replace the motherboard on your own, you can buy a new Windows product key.

  See you soon

• HP envy 700-410: made this motherboard support SLI?

  Memphis-B motherboard.

  Does anyone know if she has SLI support? Aka, being able to run 2 video cards at the same time down the line

  I don't think, there only 1 PCI Express x 16 (Gen 3.0) slot on the motherboard.

• which processors can take a motherboard supported very 4101p (494035-001) jal50 used on compaq presario cq40?

  I have a compaq presario cq40-142tu, with a celeron t1600 installed. I want to replace this with a faster processor but can't find a site that lists all the processors that are compatible with the motherboard, which is a worm of 4101P jal50 1 or 494035-001.  as the celeron t1600 has a front side bus at 667 mhz, I guess procies upgrade as possible would be a t7600 to better or at least a t5500, since these procies run at the fsb even.  any advice on where to find a list of processors supported for this motherboard would be much appreciated.

  It took some time, but I finally got my hands on a t5850.  Installed and it works like a charm! a celeron t1600 it is now on a core 2 duo procie.  also improved the hard disk in the series hitachi 160 GB 5400 RPM to a 640 GB 7200 RPM samsung. also changed the RAM of 2 GB (1x2Go) tech of micron for gskill 4 GB (2x2gb) RAM.  OS is win 7 ultimate 64-bit, standard was vista 32.  one thing I noticed, though. the Rams are running at 667 mhz even though they are valued at 800, and I have absolutely no idea on how to change this. Publication of the research on some more and I think that the jury can also support 800 mhz fsb procies, might try that also later on. So far I am very satisfied with the improvement. Oh, to be on the safe side, be sure to upgrade to the latest version of the bios. mine was initially f.14, not f66a. problem solved!

• Fat Web Creative Cow says funtion edition problems I am having in my site editing is due to the Fire Fox brouser. What can I do to solve this problem.

  I had a Web site, advancedesdservices.com, for several years now and used their editor to completed, Site Deluxe. Explorer wouldn't let me open the Site Deluxe tool in Fat Cow and they suggested I load a browser evolved as Fir Fox. I did and it allowed me to open the tool. However with Fire Fox deluxe edition tools Site do not work such as cut, paste, spell check. The spell Fire Fox identifies Miss spellings but do not allow for replacement word suggestions. Fat Cow says he must have a problem with Fire Fox and suggested I ask you or load another browser. Any suggestions?

  See:

  • http://KB.mozillazine.org/Granting_JavaScript_access_to_the_clipboard
  • https://addons.mozilla.org/firefox/addon/allowclipboard-helper/ - AllowClipboard Helper

• Pavillion P7-1423w: failure of the motherboard - how can I retrieve the Windows license key?

  I bought a refurbished Pavilion p7-1423w a couple of years and a couple of weeks, it's totally dead.  It wouldn't boot on hard drive, CD, DVD, or USB, and I couldn't get into the BIOS.  It was toast.  Thinking that it was the motherboard, I bought as close to the same motherboard came with the computer as possible, hoping it would always start windows.  I replace the motherboard, and after several attempts, I got it to start on Windows.  But then I realized that Winodws was not enabled, so, apparently, that the Windows key has been changed somehow.

  My computer came with Windows 8 is installed, and I see that the keys are in the old motherboard BIOS, which is dead.  I tried to recover the old key from the hard drive in Windows.old, but not luck.

  HP can provide new keys for me since the death of the motherboard?  The product is no longer under warranty, so it seems that this will cost me $60 to call them.  Is this correct?

  Thank you

  Tim

  Rzgui, welcome to the forum.

  The license for Windows on OEM computers is only for the original configuration.  Microsoft will not make available product keys.  You will need to purchase a full copy of Windows.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• dead motherboard p6130y. can I replace with same MB

  computer does not start. Nothing after plugging. It seems that several suspects caps (bujlging). PS and good.

  Coulld suffered an electric shock (lightning). Found replacement bd on e - bay, the same specifications as this one. Pegatron m2n78 - la

  If you do not reserve for purchase on EBay, it's what I would do.  Just make sure that you get the same version of the m2n78 - la as you have.  There are several iterations that are similar and all carry the designation "m2n78 - la".  One specific is listed as M2N78-(purple)

  There are

  (1) M2N78-(purple)

  (2) M2N78-(VIOLET6-GL8E)

  (3) M2N78-(Violet-GL8E)

  In addition to inspections, it perhaps #1 and #3 are the same.  If you can get the current motherboard label numbers, which would help in the search.

  Assuming that you are skilled enough to transfer the material from the old to the new, you should be good to go.  Don't forget to clean the CPU and the heatsink and applied new thermal paste on same, before feeding the reconstructed platform.

• Card mother compatible ECS MCP73VT-PM please. I need a motherboard that can hold in HP IMEDIA X 2414

  Boots of my HP DESKTOP IMEDIA X 2414 (bought from PC World UK 2.5 years) is no longer.
  TECHNICAL DATA:
  MATERIAL:
  IMEDIA X 2414
  Intel Core 2 QUAD processor Q6600
  3 GB DDR2 #320 GB 7200 RPM SATA HARDISK
  NVIDIA: GEFORCE 7050 up to 1407 MB
  P/N: PB80128501
  [Personal information]
  PROBLEM: Switch on computer and you get NO SIGNAL on monitor LCD ACER.
  MY STEP BY STEP TOUBLESHOOTING:
  1 Unlpug monitor and a card on my laptop (very good for my laptop boots) so WATCH not IS NOT THE PROBLEM.
  2 replace MY power supply with a new power supply, no change (IE NO SIGNAL appears ON the screen LCD ACER), PSU (Power Supply Unit) is not the problem.
  3. REMOVE 2 DDR2 RAM cards, switch on the desk, and I get a continuous beep. Apparently
  This suggests that the motherboard (ECS MCP73VT-PM) is good.
  4 reinstall the 2 DRR2 RAM cards, insert a new external graphics card, unplug the monitor from
  Graphic INTEGRATED card and plug it into an external graphics card, turn on the computer, result: ALWAYS
  NO SIGNAL on the monitor, so graphics card isn't necessarily the problem.
  5. extract the whole motherboard of the computer case, use my magniflying glass to inspect
  all the capacitors. No capacitor doesn't show any corrosion to their background, no bump on top, without leakage
  any where. Then I remove the (intel Core 2 QUAD processor Q6600) processor, check it carefully.
  no leakage.
  (6 reinsert the processor, turn on the computer, yet I get NO SIGNAL ON monitor)
  
  Question: What is my problem
  Answer: My motherboard is faulty and I can't find the fault.
  Now, I want to replace the motherboard together and then to reuse my 2 DDR2 RAM and processor cards
  on a motherboard which must be geometrically compatible with ECS MCP73VT-PM motherboard.
  Could you tell me what kind of mother I have to buy. I am absolutely sure that my 2 DDR2 RAM cards are still usable because I tested them on another computer that can boot up. I do not know
  on the processor, because I was not able to test it on another machine.
  Help, please. MY new motherborad should be able to adapt in the case and has compatible
  audio.

  It is a HP support forum.

  I recommend that you give Packard Bell support a trial.