MagSafe 2 led is off, but the battery is charged!

While trying to load my MacBook pro 13 inch Magsafe 2 connected led is not off leauge or green light tried to reset and upgrade to the latest update but always disabled when connected

Please advice

The battery in the title bar indicator shows that it is connected?  It could simple breakfast was DIRECTED into the magsafe connector is dead.

You can also check this topic Mac, reporting system, power and see if the battery as the current power source said yes or no when it is plugged.

If it's just the LED and you are still in warranty, just take in an Apple store for an exchange - the power brick is covered by your hardware warranty.

Tags: Notebooks

Similar Questions

  • Laptop stops when the power cord is not plugged in but the battery is charged to 100%.

    just happened this morning.  accidentally deleted the decision-making of the laptop.  and the judgment of the laptop.  weird because this has happened before and no problem.

    However, this phone wouldn't turn.  until I have plug AC laptop would be the power of the laptop on.  I checked the battery is the meter displays 100% charged.  in windows, it is 100% loaded.  but as soon as I unplug the laptop, the computer shuts down.

    I have windows 7 and my computer is HP dv6t Quad Ed.  any help would be much appreicated.

    Plug the power adapter. Connect to Windows and open the HP Support Assistant perform the battery test. Post your results here.

    If you have the most recent UEFI (v 5.1 or higher) environment installed-> press-> power button press the ESC key to call the menu of boot - select F2 the System Diagnostics-> PC HP Diagnostics UEFI material-> select components-> battery Test tests.

    Post your results here in your thread.

    Best regards

    ERICO

  • (plugged in, load) but the battery is not charging

    Hello!

    I have a problem with my hp laptop Pavilion dv6 - 2190ev.

    The laptop cannot start if the charger is connected only (and the battery). It will only start if the battery is on. Also, the led and the laptop displays: (plugged in, load) but the battery won't charge!

    The battery and charger are ok, because I tried on another laptop and work there!

    So, the problem seems to be on the laptop. I also update the BIOS and the problem persists.

    Can someone help me solve this problem?

    Looks like you did a few good troubleshooting at this point.  One thing which is ofter overlooked in these questions is the motherboard.  Here is an article by HP, battery not power Notebook or hold a Charge.

    Please take a look.  There are suggestions for troubleshooting for the power supply, motherboard and battery, as well as links to other useful information. I'm sorry this isn't a simple solution, but you could just find very useful information in the article.

    Good luck with it,

  • My laptop is plugged in, but the battery is not charging

    My system is win7 Ultimate, 32-bit operating system. My laptop is Toshiba Satellite - C600 - 02L, processor: Intel (r) Pentium (R) CPU, P600 1.87 GHz, 1.87 GHz... I bought it about a year and eight months ago.

    I noticed that the battery light is off. I checked the battery meter icon & he said the PC was plugged, but the battery was not in charge. In the Device Manager window, I found that a device was not working properly. The details of this device are:

    Device type: drivers Non Plug-and-Play

    Service name: MpKsl45a6e13d

    This device is not present, is not working properly or is not all its drivers installed. (Code 24).

    I don't know if this has nothing to do with the problem, but if so, what is the solution to this problem? Please help me solve this problem.

    Thank you.

    Hi Ronnie,.

    Thank you for your attention to this issue. Pls find below info from the battery.

    Battery: Battery information

    Rated capacity

    48600

    Full last Charge

    30272

    Concerning

    Hi Mustafa

    This information shows that your battery has 62% of the original capacity left. Even if it's a little weak, it is not at a critical point where the battery should be the cause of all the problems. The typical Li-ion battery will last for 1 to 3 years.

    I would recommend that you go to Toshiba Support forums and check to see if there is a utility to check the status of the material of the AC/charge circuit on this laptop. Here are a few links for your convenience.

    Toshiba support - home page:

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Toshiba Support Forums:

    http://forums.Toshiba.com/

    Computer troubleshooting - Toshiba Forums: http://forums.toshiba.com/t5/Computer-Troubleshooting/ct-p/cat_troubleshoot

    Tell us what you find.

    Concerning

  • Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

    Is it possible to restore an iPhone on a previous backup?  My phone was stolen 2 weeks ago and took me off but the thief has changed a lot of my apps and things.  I just want to know whether and how to restore them from before flight

    How the thief has changed a lot?

    You do not have a password, find my iPhone ON?

    Read here for the restoration of the backup: http://support.apple.com/en-us/HT201252

  • Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

    Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

    This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

    Help!

    The laptop is a year old.

    I already ran the diagonsitic battery and it said the battery was good.

    OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

    Here are the parameters:

    reserve battery level (this is when the popup will appear).

    10%

    low battery (this is when the low battery action will be performed).

    8%

    critical battery level (my computer would die at this point.)

    7%

    low battery action: sleep, sleep (this customize to your liking).

    battery low notification: on (hold on).

    critical battery action: sleep, sleep (my computer died already in criticism.)

  • 2000-2D02TU HP: HP 2000-2D02TU Power LED power switch but the laptop does not start.

    Someone help me.

    HP 2000-2D02TU Power LED power switch but the laptop does not start.

    What I'm doing.

    Please help me

    Model No. - HP 2000-2D02TU

    Hello @Alok_Bhai,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

    I read your post on the laptop won't start does not and wanted to help you!

    You indicate that the lights are flashing, but the laptop does not start?  If this is the case, try to review the following document and let me know how it goes:

    Computer does not start and emits a LED or beep Code

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

    When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

    Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.

  • Brand new laptop dies completely stopped for 2 days, but the battery lasts 5 hours if the accused

    Hi guys, my brand new Acer E 15 dies completely if I did not put on for 2 days, but the battery lasts 5 hours so I load it.

    If you stop the way you do that, when you start it you see the Acer screen at startup until it starts to load windows? Go to Options to food and on the left, click on choose what the key power and closing the lid is set to make.

    If it is in hibernation, chane button close and cover for sleep.

    Hibernation can cause big problems.

  • Battery plugged in but no load and battery life which is at 0%, but the battery is 89-90% charged.

    I have a laptop gateway that I bought last year.  It runs Windows Vista Premium (64-bit), and recently it has been send me load/battery indication problems.  The battery becomes a burden, but the battery monitor does not indicate correctly.  I watched it one day and it loaded up to 89-90% and then the battery monitor indicated 0% and not charging.  When I restart the laptop the charge indicates correctly around 89-90% and will show correctly when it is plugged in.  Once he reached 89-90% charge once again it comes back to life 0% battery and plugged in and not charging.  I tried the battery re - learn and when it reaches the level of 89% it stops and shows a surge of battery, but if you restart the pc it will state the cost of 89% and act normal.   I tried the procedure that I saw on this site earlier with the functioning of the battery all the way down and let the pc "die" on its own, but that still does not work.  Is there a problem with the software in the package of windows vista power control?  I saw at least another person having the same problem but have seen no response or resolution for this.  It is not the connection motherboard problem because the thing is load and works normally except when, if you try to load up once he reached that magic level, it indicates a 0% charge and plugged in and not charging.  I have signed up for a profile on this site and have been typing this message with remaining 0% battery Xantrex battery life reading.

    Question resides in the BIOS. I MD26 series laptop Gateway and has been facing the same problem.

    Download the latest BIOS for you series laptop, update your BIOS and you are done. I found the BIOS of my laptop to this place

    http://support.gateway.com/support/drivers/GetFile.asp?ID=24427&DSCR=gateway%20MD24%20and%20MD26%20BIOS%20Version%209A10h%20For%20Windows%20Vista&UID=290186182

    Hope that solves your problem.

    PS: Please download the BIOS that is related to your computer laptop model/series only. I am not responsible for any damage to your motherboard

    -Patricia

    I am what I am...

  • Laptop screen turns off but the system never sleeps when closed.

    Hello!

    I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

    Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

    Thank you!

    -S.

    Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

    If you have my problem and SRVNET is active, you will see this:

    SYSTEM:
    [DRIVER] \FileSystem\srvnet
    An active remote client recently sent requests for this machine.

    2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

    powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

    and for good measure (not sure if necessary but I did anyway)...

    powercfg - requestsoverride DRIVER "srvnet' system Awaymode

    3. once all is said and done, it should look like this after you run:

    powercfg - requestsoverride

    [DRIVER]
    \FileSystem\srvnet SYSTEM AWAYMODE
    srvnet SYSTEM AWAYMODE

    4 enjoy again the "sleep mode".

    Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

     

  • computer won't goto sleep IE screen turns off but the hard drives will not be

    No matter what I put in power options, the computer won't go to sleep.

    The monitor turns off but the hard drives, fan to continue working.

    I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

    The computer turns off when the power off but sleep option does not work.

    Thanks for any help.

    Hello

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may be due to the following reasons:

    -The drivers are not updated.
    -Power option settings are incorrect.
    -The devices connected to the computer are preventing it from going into standby mode.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run Troubleshooter of power and control.
    Reference:
    Open the troubleshooter of power
    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Windows 7 is not going to sleep
    https://Support2.Microsoft.com/kb/976877

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Satellite L850-150 will stop even if the battery is charged

    Good evening

    Since I've upgraded to Windows 10, the following occur:

    The laptop battery stops unexpectedly without warning the minimum level, even if the battery is charged
    I bought a new battery and it is exactly the same as the previous battery

    What can happen?

    Best regards and thank you

    More details
    The first OS is Windows 7
    I created two partitions
    In the second partition, I installed Windows 8
    After awhile, I installed Windows 10 on Windows 7 and also installed 10 Windows on the partition of Windows 8
    In the two bulkheads made
    The computer turns off when you do not have the power cord plugged
    Earlier in Windows 7 and Windows 8, it did not
    Help, please

  • Carpet mouse stops working while the battery is charging.

    Recently, the mousepad does more, or very slow acts while the battery is charging, and the loptop is flat on the desk. However, if his load and I place on my knees the mouse pad works fine.

    How can I fix?

    Thank you

    Hello JoeNYC65

    Unfortunately you have to is hardware related and not big thing we can do for this purpose. I suggest you contact the manufacture of equipment and have them repaired/replaced for you.
  • Satellite U300 turns off when the battery has been removed

    Hello

    I'm on the laptop with the battery in place, and the power supply plugged in.
    That's when I take off the battery (always plugged power) who, after 5 seconds the laptop powers off.

    It's not happened before and now it happens ALL the time every time I have to remove the battery.
    I noticed that when the battery is removed, the battery light is always on – if for some reason any cell phone still thinks the battery is connected.

    For me, it looks like an electronic power supply problem.

    But it s just my personal opinion

    I think that the laptop should be checked by an authorized technician.

    Contact the ASP in your country and ask for verification

    If the warranty is valid then an everything should be done for free

    Good bye

Maybe you are looking for

  • Can I prevent FF their default status

    My wife seems to keep losing their status as default FF. Is there a way to prevent this change?She makes me crazy fixing!

  • How can I change the settings of the maximize button?

    I don't like the new feature click on the green button to go full screen. I want to maximize as before. How can I change this back? And also, on this new feature that allows you to have two windows side by side... I can't find a way to do so with any

  • do not sync music from iTunes

    I got in trouble recently trying to sync my music from my iPhone 6 Plus. Since yesterday, whenever I try to sync (wi - fi or USB), my music library does not sync on my iPhone. 20 latest songs, I added do not go on the iPhone and all the illustrations

  • Need to frontend.dll for 64 bit TestStand 2014

    Hi all I get an error during indexing, I think I changed something in the directory then it asks x64\frontend.dll file that I could not find anywhere. I found frontend.dll for 32 bit, but not for 64 bit. I also tried to uninstall teststand 2014 and i

  • hp5280 font size

    When you print the page on the screen, printing is to small to read. When you view the preview page appears here what about the font size. Help would be very appreciated. I use a hp5280 all in one printer and a mac computer.