Maintain a VXI - 11 connection continues over TCP/IP to a device over a long period

Similar Questions

• How to make a transformation of Fourier data acquired over a long period?

  Hello

  I am trying to configure Labview such as my data will be collected during the 10ish minutes and then have it handle all data in a Fourier transformation. I know that measuring the spectral power "tool" allows for the FFT, but my current attempts seem to have LabVIEW occupying in a limited time with a value of measures. Would it not be possible to achieve my goal without having to resort to the backup of the data I do then compile and analyze separately?

  
  

• Update KB977816 keeps failing to install, over a long period.

  Attempts are made on a daily basis, but without success. I have not noticed any problems as a result of the failure, but the update is rated important and I think that the problem must be resolved.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339/en-us >

  Please let us know if it did or did not help to solve your problem.

  UTC/GMT is 07:08 on Thursday, July 12, 2012

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR COMPENSATION ACCOUNT PAL IS NO LONGER VALID, GO TO THE ITUNES STORE ETC., WHICH I DID SEVERAL TIMES GRRRRRRRRRR 50MINUTES W APPLE ADVISOR - IT HAS JUST FACT, BUT LOSE THE SETTINGS ETC. ??

  IMPOSSIBLE TO UPDATE ALL APS, CONTINUES TO RECEIVE YOUR PAY PAL ACCOUNT IS NO LONGER VALID, GO TO THE ITUNES STORE ETC, WHAT I'VE DONE SO MANY TIMES

  50MINUTES W APPLE ADVISOR - SHE HASN'T DONE, BUT LOSE SOME SETTINGS ETC. ??

  PayPal requires that a credit card account is valid.

  Payment methods, you can use in the iTunes Store, App Store and iBooks Store - Apple Support

• After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue?

  After the update to OS 9.2.1 connection of my mini iPad with a VGA projector no longer works... Any clue? Thank you

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

• Why the fan on my macbook pro continue to run at a fast pace for long periods?

  The MacBook Pro mid-2010

  OS X El Capitan, 10.11.3 version

  Processor: 2.4 GHz Intel Core 2 duo

  Memory: 4 GB 1067 MHz DDR3

  Graphics card: NVIDIA GeForce 320 M 256 MB

  163 GB available

  iWorks ' 09 has been upgraded to the latest versions

  No new upgrade is available for the system.

  My Question: Why the fan on my macbook pro continues to run at a fast pace for long periods?

  I guess that the fan runs constantly, because the CPU is working at a high rate. I rebooted several times but without any resolution systems. At the bottom of the computer is very hot at times so place the laptop on an object that allows good air circulation. This problem occurs intermittently every few weeks or more. I wonder if it is downloading an important upgrade, do a scan of viruses, or by working as a bot. Lights for hours. Currently, I estimate that it has worked rapidly to possible 6 hours. Thank you.

  It will usually be to dissipate internal heat from running resource intensive applications.

  Download and install a temperature/speed control application.

  Open the activity monitor all THE PROCESSES and CPU to display values between high and low.

  When the fan speeds up, post pictures of both for review.

  Also run Apple Hardware Test:

  https://support.Apple.com/en-us/HT201257

  Note that an error free AHT is inconclusive.

  Ciao.

• I can not get the automatic updates on my samsung jack sgh-i616. _ "connection to the update server is not available. Check your data connection settings and make sure that the device date and time are correct "___RESULT CODE: 80072ee7__ _"

  I can't get the automatic updates on my samsung jack sgh-i616.

   

  "Connection to the update server is not available. "Check your data connection settings and make sure that the device date and time are correct.

   

  RESULT CODE: 80072ee7

   

  -It is a windows mobile 6.1
  
  
  Thank you very much! = D

  As a guide.

  This error code translates ERROR_INTERNET_CANNOT_CONNECT.

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Outlook Express 6: your server has unexpectedly ended the connection. The potential causes for this include server problems, network problems, or a long period of inactivity. Error number: 0x800ccc0f

  Original title: Windows XP and Outlook Express 6

  I have a new computer with outlook express and went through the set up instructions.  When I tried to send a test email, I got this error message:

  "Your server has terminated suddenly the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: 'pop.mail.yahoo.com', server: 'pop.mail.yahoo.com', Protocol: POP3, Port: 110, secure (SSL): Yes, error number: 0x800CCC0F. »

  How can I fix this error message and have e-mail sent via Outlook?

  Hi Jeanette Logan,
   
  Here is an article that addresses this issue. Follow the steps listed in the article for this problem:
   
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

• Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity.

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Topic "business profile]', account:"pop.bizmail.yahoo.com", server:"smtp.bizmail.yahoo.com"', Protocol: SMTP, server response: ' 451 see http://pobox.com/~djb/docs/smtplf.html. ', Port: 25, secure (SSL): no, Server error: 451, error number: 0x800CCC0F"

  You must make a few changes, not only on outgoing parameters, your incoming parameters also need changes.

  Open your e-mail program > tools > accounts > your bizmail account > properties > servers, under outgoing mail server, check "this server requires authentication" > apply > advanced, under outgoing (SMTP) mail change to 465 not 25. Put a check mark on "this server requires a secure connection (SSL)" > under incoming (POP3) mail, change it to 995 no 110. Put a check mark on "this server requires a secure connection (SSL)" > OK

  t-4-2

• HP ENVY 360: FlexNet Connect continuous error state

  I recently bought a laptop HP ENVY 360 and apparently, there's an application installed (via HP) called FlexNet who supposedly examines your system for updates and maintains the current system.  The system is constantly accumulate errors throughout the day like this...

  FLEXNET CONNECT CLIENT...  Generic communication error...  HTTP error was returned by the server... said response code Error (500)

  I'll go up to 10 or more of these error windows accumulate on my screen at any time.

  I followed suggestions to install a Manager software and using the procedure of removal of companies without success.

  Does anyone else have this problem - suggestions?

  Thank you, Scott

  Hi @ScottB2,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more. What is your specific model of HP x 360 notebook? Computers laptops HP - how can I find my model number, serial number or product?

  FlexNet Connect is mainly for virtual (VPN) connections. If you do not use this option, you may simply need to uninstall. Here are a few links that should be instructive. :

  HP FlexNetwork Architecture (from Wikipedia)

  HP Virtual Connect FlexFabric understanding mappings with VMware vSphere (from virtualkenneth.com)

  Please be aware that HP does not support VPN connections, but if you want to use this link should help you set it up. Education - United States and Canada

  Please keep me updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• How to test if the pc is connected to the TCP/IP protocol?

  Hello

  I have a VI how should the data received from another PC, using a TCP/IP connection.

  My VI could connect, receive data, but if I lose the connection im not able to reconnect, because I do not know how to test if my pc is connected to the other.

  Thank you for your help,

  Best regards

  salim_mjs wrote:

  Hey,.

  I was checking for error 66, I think that it check if the connection has been closed in order to reconnect

  do you not think that the error 56 or 60 are better?

  with respect,

  56 is the time-out. This will depend on your remote service if this should be considered as error or ignored. If it is a server application, it should certainly be able to respond within the time limit. But if your host application is the server and the remote application is the client it is very common to receive a time-out error when querying the client if it has new data to send.

  Order the examples mentioned previously, they really give you a good idea on how TCP/IP network communication must all work, even if there is still a lot to improve to create a truly reliable connection. But start from there come back if you get into trouble.

  Rolf Kalbermatter

• internet disconnection but to maintain the local network connections

  How disconnect (and subsequently reconnect) the internet connection of a computer in the network when you are keeping this computer completely connected to the local network.  I can't find a way to do it with a few simple clicks.  This is easily achievable with Network Magic, even the point of having a particular computer available in the annex "over and out" for internet and 100% available for the local network.  The problem is that Network Magic is no longer available.

  Solutions appreciated.
  

  Jayant,

  Thank you for your time on this, but I found a nice software which is more that I need.  It is at this place for others who want this feature.  I recommend that you check it out because it is very versatile, loads quickly and seems to be bug free.

  http://www.Blumentals.NET/inetprot

  Thanks again, Nathalie,.

  Aikido

• Questions of ESXi 5.1 ISCSI--> cannot establish a network connection (continued)

  Hello world

  I had a problem there not too long ago (thread link below) where my ESXi hosts could not establish a connection with an IBM DS3500 on start up and "rescan", however their connectivity worked correctly without any problem after commissioning and when a "rescan" finished. We determined that the most likely cause was the unit IBM itself. However, I wasn't completely satisfied.

  In order to deepen the question and dismiss my guests being the problem, I created a unit ISCSI myself with two new hosts of ESXi 5.1 (version 1157734).

  ESXi signals that it cannot connect to the initiator ISCSI (network error) - but it can run virtual machines and browse data stores?

  The configuration is the following:

  Test environment:

  2 x ESXi 1157734 hosts

  1 x server Freenas ISCSI (ZFS R10)

  At the start of my ESXi hosts in the test environment, download the same error as our production environment. They also put on the same error message (in the event log) when I "rescan" map of the ISCSI software. However, once the scan is finished, I can't see any error message and everything continues as it should (Round robin, active active). I can get a brilliant flow also. It's as if the errors are almost... false positives?

  Example of the error message (test environment):

  Connection to the iSCSI target

  IQN.2011 - 03.org.example.istgt:iscsi on vmhba35

  @ vmk2 has failed. The iSCSI initiator couldn't

  establish a network connection to the target.

  error

  17/10/2013-08:33:35

  ESXi hosts are configured as follows:

  Test environment:

  • (ESXi hosts) Two network cards for ISCSI, one for VM traffic
    • NIC1: 10.20.20.2/24, NIC2: 10.30.30.2/24
  • (Freenas) Two network cards installed on the ISCSI device (dedicated to ISCSI traffic)
    • NIC1: 10.20.20.1/24, NIC2: 10.30.30.1/24
  • ESXi is set to round robin, which works properly (I can max on both ports at the same time)
  • Two VMKs are related to the ISCSI Software initiator and defined to dynamically discover the two ISCSI addresses
  • Unity of ISCSI and the hosts are not on the VLAN, the switch is dedicated to ISCSI traffic (However in the production, the two networks are separated by VLAN.) I removed the in the test environment to simplify everything)
  • The vSwitches (who hold a single VMK for ISCSI) are fixed:
    • "Promiscuous" mode: reject
    • Change of MAC address: accept
    • Forged passes: accept
    • The traffic shaping: disabled
    • No NIC teaming (obviously)
    • Each VMK inherits the settings of these

  Quick points:

  • My hosts use VMware approved NIC in my test environment. My production environment runs on full VMware hardware approved
  • Can I use ping of vmk join each each VMK ISCSI initiator
  • I can use the nc-z target_ip 3260 command to check connectivity to the port
  • The ISCSI test has two network adapters, each on 1 Gbps ports
    • I can get around 800mbps per port when copying lots of files (both ports are active)
    • I see no error in copying a large number of virtual machines around, or backup files
  • I only see errors on start up and "rescan".
  • I have two network adapters on each host ESXi dedicated for ISCSI. Each NETWORK card has a single VMK. A single mapped port on ISCSI, the other is mapped to port B (I used to have two VMKs by nic, but I removed that in order to simplify everything)
  • I have updated the firmware on our switch of production. No results
  • I've used 4 different switches in order to avoid a network problem. No results
  • I tested ESXi versions 5.0, 5.1 (799733 & 1157734), all have the same mistakes
  • The ISCSI ports are on different networks according to the VMware (I was told not to put on the same network VMKs)

  Any ideas? It's starting to drive me up the wall. Any help would be greatly appreciated

  I've seen several times in recent months and was beginning to think it is specific to the HP P2000 units because it's the only time wherever I saw him! I now believe that ESX/iSCSI rather than issues of driver or table.

  On my last install, I found that errors occur as soon as the table is connected, i.e. before any storage is displayed.

  Single host ESX, no guests. 2 Intel adapters to 2 HP past by dedicated HP P2000 1 GB table with all 8 wired ports.

  All roads are good, all lights are in the State expected.

  It did not affect the use of the storage in question to any site, so there has been no need / a momentum of any further investigation.

  B! 886y annoying however!

• find the page then is trying to connect continuously

  never stops connect you even after he finds the page, all pages...! All the time...!

  This problem may be caused by an extension (FoxLingo) that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  If you use FoxLingo and then try to come back for the moment the 2.7.3 release.

  • FoxLingo: https://addons.mozilla.org/firefox/addon/foxlingo-translator-dictionary/versions/2.7.3