Making a record of recovery failed

Similar Questions

• Recovery failed on the L850 Satellite

  Hi, looking for help after a Toshiba Recovery failed on a L850-ID5.

  Due to a problem with the windows Explorer that comes, I could not solve, I decided to do the full restoration of Toshiba. Finished, he gave an error code 10-FC12-0570.

  Now computer tries to start windows, goes to a blue screen with a few other technical details (too fast to see what is there) and then to the windows recovery page. I tried all the options like mode safe without success. If the left, it will continually cycle and re - start.

  Only other option seems to be to use an installation disc, but there is no disc with this laptop.

  Any ideas how to get out of this mess?

  Thank you very much.

  Hello

  Unfortunately I can't say with certainty what the problem but that is defective recovery image or there is a problem with the HARD drive. For a long time, the laptop manufacturers do not offer installation disks but in s manuals explains and describes how these discs can be created and your big mistake is that you didn t do backup recovery image and create the installation of recovery disc.

  I don't know how old is your machine, but if the warranty is still valid I recommend you contact the nearest Toshiba service provider and ask for help. Explain the problem and ask for help.
  If they ask for recovery disk, you try to explain that you didn t expect failure of HARD drive and you still don't have it.

  In General, you have two options:
  -for order of Toshiba recovery media (it is not for free)
  -to get the new HARD drive and test it with the original recovery disk
  In any case, don't spend your money before you try to clarify this with Toshiba service.

• Recovery failed

  Hello

  I have problem with recover my system with drive Q on W530.
  I start the recovery with F11 when booting. Loads of everything very well. As recovery menu shows and I choose Lenovo makes the options at the bottom of the window. I accept the conditions of recovery and after I click next dialog box opens with: "the recovery failed. I do not know how it works... The only thing I've done with drive Q was remove drive letter, which was made by mistake, but I put the letter Q even more.

  Thank you in advance!

  Thanks for the reply! I could not make the recovery Windows Media also. Everything was caused by mSATA SSD. When I removed it recovery has started working again. I made a recovery with the USB media and recovered it on the SSD. I had to remove the drive Q and other things of system disk HARD as multiplied recovery drive causes the same problem. Remember: to make the USB recovery media work, there has to be FAT32 partition active. So now I have state of factory on mSATA SSD and formatted HDD is disk storage now.

• Pavilion dv6 - 6 c recovery fails in the process

  The computer was smart errors and do not start.  I removed the hard drive and checked with the hitachi software, which reported that the player was fail with an unspecified error.  I bought a reader of travelstart 750G of hitachi replacement similar to that from the laptop and ordered a HP recovery disk.

  The computer is a Paviliion dv6-6c35dx Entertainment PC

  The recovery disks provided is 67890-002 System Recovery DVD Windows 7 Recovery Media for Windows 7 product Service Pack 1.

  Recovery fails after about an hour after the final disc finished copying the files.

  The error message allows me to select the details that are:

  [15:31:01.90] ChkErrBB.CMD: detect an error in the PININST_BBV

  [15:31:01.90] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  [15:31:01.90] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  These errors are in a file CTOERROR.flg name which opened in Notepad, when I chose details.

  Using Notepad to navigate to the suggested location I find that there is no subdirectory \logs system.sav.

  I gave me the wrong set of recovery disks?

  I checked the hard drive and the new and old are hitachi HARD drive part number: 5K 750-640

  Please help, I would really like to get this year old machine recovered.

  Hello:

  I can't help you with the problem of recovery disk.

  This site provides a different part # for the kit, but that does not necessarily mean you've got the wrong set of disks.  HP may have revised their.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=16166

  I can help you with if you can read all 25 characters of the product key of Windows 7 on your laptop is to make your own regular W7 installation media, so at least you can get the laptop working again.

  Here is how to do this if you have the product key for W7...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• The HP Pavilion dv7-3065dx system recovery failed

  I'm trying a recovery of my CV due to problems that fails to fix with Microsoft office and Photoshop which will not at the restoration work.

  I first used the recovery disks that I did when I bought the computer and ended with "the system recovery failed.

  I then tried with the help of the partition recovery and restore to fail again

  I bought the HP discs to do the recovery and still the same thing. In case of failure

  I read that it could be because of my internet connection, but it is a compressed and wireless and I do not have access to the router connect physically, the internet is password protected.

  I always get the computer to go through all three disks, System Recovery DVD Windows 7 Edition home premium 1 and 2 as well as the Application and driver recovery CD, then he starts the third CD and continues processing but in the end, I get the same message, "the system recovery failed.

  I contacted HP for assistance but they want $99 for the help, I am low income and can not even afford and tech IT much less $99 so trying to fix my computer on my own. I was able to make my daughters Toshiba last week so am able to talk right now, but my computer isn't end of recovery

  I save the file showing what was going on but don't know if I can put it on this post and do not know how to open it up to copy / paste

  Hope to hear from someone soon, thank you very much

  PJ

  OK, thanks, I got it today. It seems that my hard drive is about 450 GB, which is nice. I thought that it was more room there to 58 GB. I will definitely get this fixed. He said that I have 408 GB unallocated, so now I can get it fixed. You've been a great help thank you

  Paula

• my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  my system got infected and had to be recovered, but the recovery fails... How can I get the recovery disks?

  Hello

  Please follow instructions on the link below to see if the recovery discs are available for your laptop:

  http://support.HP.com/us-en/document/c00810334

  Paul

• How to record the recovery of BitLocker on USB key code?

  How to record the recovery of bitlocker on my USB key code?

  Original thread: BitLocker

  Hi, nurse,.

  If I understand correctly you want to activate the Bit locker on your computer and save the recovery on USB code.

  Please follow the steps below to do so:

  1. Press Windows + X, and then select Control Panel.
  2. Click system and security, and then click BitLocker Drive encryption.
  3. Click on turn on BitLocker for the operating system disk. BitLocker will scan your computer to make sure that it meets the requirements of system for BitLocker. If your computer meets the requirements, BitLocker informs you of the next steps that should be adopted to enable BitLocker, such as preparation by car, turn on the TPM module and encrypt the drive.
  4. Secure once the TPM is initialized, the BitLocker Setup Wizard prompts you to pick how to store the recovery key. You can choose 'Save the recovery on a USB flash drive key' and follow the instructions on the screen.

  Hope this information is useful. Please let us know if you need more help with Windows, we will be happy to help you.

• Is it possible to avoid the "" Record 1: discarded - failed all the clauses WHEN. ' "

  When using when clause sqlldr. It generates too many lines as below-

  "Record 1: discarded - failed all WHEN clauses."

  "" Sheet 2: discarded - failed all WHEN clauses. ""

  "" Record 3: discarded - failed all WHEN clauses. ""

  ' Record 4: discarded - failed all WHEN clauses. »

  
  

  If she rejects millions of records. in the log file, it shows millions of lines. size of the log file is too big.

  He takes seriously the space on my hard drive.

  at the same time I need other details in the log-file

  125466 lines loaded successfully.

  0 rows not loaded due to data errors.

  65523 lines not loading because all WHEN clauses were failed.

  0 rows not populated because all fields are null.

  Run started on Fri Jan 23 12:27:16 2015

  Run finished Fri Jan 23 12:27:18 2015

  Time was: 00:00:01.70

  Time processor was: 00:00:01.16

  None of the parameters of SQLLDR to avoid these lines...?

  Oracle 11.2.0.1.0

  Windows 2008

  Although you can use SILENT = RELEASES in your SQL * Loader command line to remove the output to the screen, as much as I know there is no way to remove in your log file.  However, if you use an external table, you can use NOLOGFILE, but which eliminates the whole logfile, not only releases and requires that the data file is on the server, not the client.

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• Recovery failed on Satellite P200

  Hello.

  At the beginning I wanted to install WinXP on a Satellite P200 but then I read many things on the internet and which might be more difficult than I first thought.

  Now, I only get it back with the RecoveryCD came with the laptop.

  It s my cousin's laptop. It of a little slow and has a lot of garbage on this matter, we decided to update the system.
  But the Toshiba Recovery says:

  + Cheking HDD1 +.
  + HDD1 found! +
  + BIOS 0 is disk 0 +.
  + BIOS 1 is disc +.
  + ERROR: GETHDD get physical disk HARD failed! +
  Press any key to continue... +.

  So I press a key, it says:

  + Waiting for ODD vacancies... +.
  + STRANGE ready F: drive. +
  + Check for support in the F: drive... +.
  + Continue... +.
  + Failed to initialize the raid class. +
  + No RAID - proceed normally... +.

  + X:\windows\system32>+

  I'm not able to recover, but I have no idea why. I also Don t want to delete everything before making the recovery, cause I m afraid that nothing will work after that.
  Notepad starts in Vista, but it is slow, as I have said before. Is there a chance the recovery work?

  The CD is very good and has never used it before and it is also the original.

  Thank you much for the help.
  Anna

  EDIT:
  I forgot to say, I followed the instructions on the CD case. I restarted the computer and you press F12, and then I chose the DVD drive and then start the CD. But I have not tried on the running system of Vista, because everywhere I read it wrong.

  Hello

  I read your ad three times over but now I m a bit confused

  If you want to return to factory settings, you must only start since the Toshiba recovery disc. Before the disc begins to install the new OS the whole HARD disk will be wiped so before recovery you can install everything, also Linux, Vista or something else because it will be deleted.

  So please follow the instructions on the CD case you have posted. I put t know where read you that isn't true, but in fact the drive erases the HARD disk and installs a new OS.

  If you have any other questions, please let us know.

• Pavilion G7-1368dx: the factory recovery failed

  A few weeks ago, Windows Update downloaded 10 Windows on my laptop. I tried a few days and decided I didn't like it so I uninstalled and reinstalled Windows 7 on my laptop. I lost the hp Recovery Manager, and by some people on this forum, I ordered the hp dvd recovery. I received the DVD and saved all my personal information. Then following the hp instructions that I started on the DVD and the recovery driver and application of discs. Records downloaded and after installation it says "failed to retrieve from the factory. So I retried 3 times with the same results. I searched the site of hp and found my problem and he said that you must have the wireless switch, but I tried and there is now nothing when I hit the button wireless. I am in desperate need. How can I fix it?

  In fact, I realized that I was wrong to installation with the hp factory recovery disks. If your laptop has wifi the you must have the WiFi button before using the HP factory recovery disks, otherwise it will fail by the Service the customer of HP. Thanks for your help.

• Drive HARD recovery failed

  Hi all

  I just tried to do a factory reset on my satellite netbook (which I've done a few times before), but it failed. I got as far as the system wipe, but got an error saying that there is no current backup.

  To restart, I am unable to access the utility and get an error saying no BONES found.

  I have another version of windows knock around, so used quepour starts the machine. I can see the partition containing the files of recovery is still present and the files are still there. Anyone got any ideas how I can use it to restore my computer?

  I have all other backups and I don't want to order recovery disks (my machine has not in any case of a hard drive).

  Any thoughts or ideas would be apprecited.

  Thank you!

  Problem, is that there are not any special trick or workaround to force the installation of HARD drive recovery. Maybe it sounds stupid now, but either it works or not. Of course, there is a reason why it does not work. I don't know what have you done with your machine so can just speculate what may be the reason.

  Like many other people you've made big mistake: you didn't create recovery (DVD or USB) media. The user s manuals document, clearly describes how it can be done and why. These created recovery media can be used if there is problem with the installation of recovery of HARD drive or what HARD drive fails and must be replaced by a new one.

  Sorry, but I don't see a good option for you now.
  By the way: why you won't restore disk original order?

• Satellite C660 - 1 DG-Toshiba Media Creator recovery fails creation DVD 2

  I spend a few hours in an attempt to create the floppies of recovery for my laptop (Satellite C660 - 1 DG)

  It fails on the second DVD at halfway. It just hangs. CTRL-ALT-DEL is no longer a cold start will have to start the thing.

  I tried several DVD but NOGO each time to halfway the second DVD, it crashes.

  I really need to create these recovery DVDs because Im going to upgrade the laptop to run a Windows Server 2012 install for development purposes.

  I thought that it would take only a minimum of time, but... of course...

  Any thoughs on is it possible to get this stuff working?

  Which blank media are you using?
  To create recovery DVDs, I highly recommend to use DVD-R virgins only. Of course, it must be high quality as TDK or Verbatim product.

  I have very good experience with these DVDs.

• Questions about the record HDD Recovery - Satellite L350D

  Hello everyone!

  I have a Satellite L350D with Windows Vista.
  I'm in my mind to reinstall.
  All my data from the two partitions are saved with the exception of a folder on my drive E Data "HDDRecovery" who shouldn't be modyfied or deleted, or whatever.

  I wonder if all the data are removed from the hard disk due to formatting, how does appear that this same folder HDDRecovery remains safe on the hard drive?
  Or is that the hard drive is not really formatted and data on my hard drive are always safe and hidden?

  Thank you for answers!

  Hello

  I'll try to explain how it works.

  Original Toshiba designed for your laptop recovery image is recorded on the second partition in the file called HDDRecovery. This image should be used if you want to install OS and have the original state factory.

  For this installation, you can use this recovery image of the second partition or by using the recovery DVD. It is recommended to everyone to create this recovery DVDs. Have you created?

  If you use recovery DVD the whole HARD disk will be formatted and all data stored thereon will be removed.
  If you start the HARD drive recovery process only C partition is removed. This folder HDDRecovery is important if you only want to use HARD drive recovery facility. When you want to use the DVD only you can remove (I do not recommend you to do).

  I hope I could help a little, but if you have any other questions please let us know.