Malfunction VI

Similar Questions

• "A serious malfunction has been detected...". »

  So my iMac just caught my attention with LOUD beep the next "dysfunction."  Is this true?

  Dear customer,

  A serious malfunction was detected with OS X 10.11.6 and your Chrome 51.0.2704.103. Please call the number below for Apple Macintosh technician to help you solve the problem:

  (818) 629-1561

  For your safety, close the Chrome browser has been disabled without the support of the technician to avoid corruption in the registry of your OS X 10.11.6 Apple Macintosh operating system

  Please contact support Helpline (818) 629-1561

  DO NOT SHUT DOWN or RESTART the COMPUTER, THIS CAN LEAD to DATA LOSS AND POSSIBLE FAILURE OF THE OPERATING SYSTEM AND NO BOOTABLE POTENTIAL RESULTING in COMPLETE DATA LOSS SITUATION, CONTACT MICROSOFT CERTIFIED TECHNICIANS TO SOLVE THE QUESTION APPELLANT - (818) 629-1561Dear client,.

  A serious malfunction was detected with OS X 10.11.6 and your...

  This kind of message is a scam. Do not answer, or call this number.

  Phony 'technical support' / 'ransomware' popups and web pages

• Local Mac malfunction file sharing

  I am using local file sharing in my house for a good 8 years. I have 2 older iMacs (white 2006, 2007 aluminum) and a new late 2015 5 k iMac that I bought a few days ago.

  For some reason any local file sharing has started to malfunction: I no 1 wifi access point and all computers are to connect to that, but in the sidebar of Finder, tab, sharing only the 2007 aluminum appears. Other computers cannot see other computers except 2007 one. 2007 iMac can see and connect them too. I checked the settings for sharing on all computers, but nothing has changed.

  I tried to manually enter the ip address into Finder go tab, 'Connect to server', but I always find myself with 'server not found '. There is nothing different between computers sharing preferences, but somehow only the 2007 one appears.

  Please help me, I use this feature a lot!

  Thank you.

  Hi pianistemre2,

  Thank you for using communities of Apple support and congratulations on your new iMac! I understand you wanting to continue using the sharing of files between your 3 iMac, but only one is considered by the computers on your network. I know it's a great way to share files between devices, so I'm happy to provide advice to solve this.

  Since you are able to see and connect to the 2007 iMac, it seems as if it were the only one who has fully implemented which files he will share, and with whom he will share the. Make sure that you have followed the steps below to configure which directories you want to share with other users on your network. Also, remember that users can access those files.

  How to share files with other users of Mac:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences, and then click Sharing).
  2. Check the file sharing.
  3. To select a specific share folder, click Add at the bottom of the folders list, find the folder, select it, and then click Add.
     1. The Public folder of each user who has an account on your Mac is automatically shared. To prevent a shared folder, select it in the list of shared folders and click Remove.
  4. By default, any user put in place on your Mac in the preferences users and groups can connect to your Mac via network. A user with an administrator account can access your Mac together.
     1. To give only some users access to a folder, select the folder in the folders list, and then click Add at the bottom of the list of users. Then do one of the following:
        1. Select a user in users and groups, that includes all your Mac users.
        2. Select a user from the network or users groups network, which includes everyone on your network.
        3. Select a person in your contacts. Create a password for the person, then click on create an account.

  OS X El Capitan: share your files with other users of Mac

  These steps are specifically for OS X El Capitan, but should be similar for earlier versions of Mac OS X.

  Once you have added users to the network or the correct groups on all your computers, you will be able to access everything again.

  See you soon!

• Malfunction of the power on the Satellite Pro 4270

  I have a problem with my AC adapter (model PA3049U-1ACA): my 4270 Pro Satellite ceased to get power and it worked only with the battery. I have this problem only twice in the last 6 months, but the other times, the problem has been resolved just remove and reinsert the plug in the notebook. Instead this time it does not work.
  How will I know if the problem is due to a broken adapter or a faulty connector "DC in"?
  I searched online for a new AC adapter but I found only "compatible" adapters: they are good or if I should get an original?

  There is another problem: yesterday the internal modem no longer works: would it be a consequence of a failure of the power started yesterday?

  [Edited by: admin on 12 February 06 17:24]

  Hello

  Original AC adapter has this part PA2450U number. If the compatible one has the same characteristics and the same connector, there should not be any problem, but I personally prefer original parts. After you have connected the original adapter, you will be able to check whether the slot is maybe defective.

  As far as I know the modem functionality depends on many things (configuration, hardware malfunction) and control first entry in Device Manager. Please report the status of the modem in Device Manager.

  Good bye

• Tecra 9000 - hardware malfunction with battery

  Hello

  If I only work with my battery I get the message:
  Hardware malfunction
  Call your provider of support material
  NMI: Channel Check/IOCHK
  Support has ceased

  Last week, I change the battery but the problem is still on.

  Hello

  According to this Microsoft article http://support.microsoft.com/kb/222973/en-us, there is a hardware problem. In my opinion, you will not be able to record only. Contact the service partner in your country and let check the device. If this continues with the new battery too, I presume that there is some problem with electronic power to the motherboard.

  This message occurs only if the mobile PC is running on battery power, or in other cases too?

• Error HD Toshiba PX1267E - 1 32 peripheral said Ext USB has malfunctioned

  Hello
  I have Windows XP and have used my Toshiba external hard drive for a few years.
  I am a novice.
  All of a sudden yesterday the message below appears and I can't get any computer to recognize the device.

  "+ USB device not recognized.
  + One of the USB devices attached to this computer has malfunctioned and Windows does not recognize. "To help solve the problem click on this message.

  I tried reinstalling drivers since internet & HARD drive CD, but the same message appears.
  I installed it on another computer and the same error message.
  The device still makes a noise and the blue light is on but no other action.
  Is that what I can do easily?

  Thank you very much in anticipation

  naveedsyed

  Good stupid situation?
  I don't know about you, but if you have noticed the same behavior on more than one PC there must be a hardware problem. Sorry, buddy, but I think the HARD drive is dead.

  What you can do?
  Maybe stupid sounds now, but I think you can say bye bye and throw it away.
  You have some important data saved on this subject?

• Key to malfunction on Satellite A300

  Nice day

  Yesterday, I bought the laptop Toshiba Satellite A300 and then I installed it, Windows 7 RC1 and now there is a problem. Key which is symbol "Å?" Slovak keyboard for English is "------" in combination with the key shift does not :-( If you press a key on the keyboard himself appears as a character but if I use the SHIFT key on the keyboard combination and the cursor is not deleted.

  Someone can tell me if there is a problem with the laptop or is the problem of the operating system and drivers?

  Thank you

  Hello

  Have you tested the functionality of keyboard with operating system pre-installed and supported? And you will see that everything works well.

  When you try to use unsupported OS offered to test only, he should not wonder if something doesn t work well.
  I am 100% sure described issue has nothing to do with a malfunction of the equipment.

• Tecra A8 BSOD - hardware malfunction

  Hello world.

  I have Tecra A8 and there is problem happened to me all the time.

  Blue screen with this message:

  Malfunction of the equipment; the system is shut down. Call your provider of support material

  I changed the hard drive & RAM, but it doesn t work

  One had this before

  It does not seem good buddy.

  It looks like a serious hardware problem. Maybe it s related to the motherboard.

  I think you should do what is written in the message: call your hardware support of the seller.

  So I recommend you to contact the local Toshiba authorized service provider.

  Good luck

• Boot Tecra 8100 - would it be CPU malfunction?

  A few months ago, I had a problem with my Tecra 8100 - does not start, everything seems OK but nothing on the screen (no post). I bought another motherboard and replace the old 1 MB, but the problem remains the same: everything seems normal, led lights turn just as it should, cooler works well but nothing on the screen.

  I tried to connect the external display, but there is nothing on it, too. I have two memory modules and I tried all combinations with them (they are OK).

  Is it possible that the problem is something with CPU - I don't know what else could be the problem?

  Please, can someone give me help!

  I assume you mean on this subject:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=22595

  Well, as mentioned in the first thread, it's not easy to say what could be wrong.
  Of course, it is possible that the CPU malfunctions and, therefore, you cannot use your laptop's!

  But these are only suggestions, and no one will be able to provide an exact error diagnostic.

• Tecra T9000: Hardware malfunction start-up

  NMI: CHANNEL CHECK / IOCHK message

  When starting my laptop, a TECRA T9000 I had problems with the message... * Hardware malfunction * NMI: CHANNEL CHECK/IOCHK this system stopped *.

  I had the hard drive changed and again I got this message once more, it starts later because there for me to write this, but if you can help me identify the problem please!

  Hello

  Windows can display only basic error messages in case of malfunctioning of the equipment, troubleshooting can be difficult. Most Centre of problems of equipment around the motherboard, the RAM on a motherboard or on an adapter, or memory cache on a motherboard or adapter.
  Well, it would be very interesting to know that you have changed material. In addition it is possible that you have improved the unit with the device is not compatible.

  Good bye

• Satellite A100-233: AC adapter malfunctions - need a new

  I have a technical problem with my laptop model satellite A100-233, which is still under mandate.
  My adapter PA-1750-08 model with output 15V 5 malfunctioned. I did not damage the laptop only food.
  I bought a model of Toshiba AC adapter universal PA 1900-22 output 15V 6 amps at a local Toshiba reseller. If I use this adapter burn I have my laptop?

  Thanks for your help.

  Kind regards

  If you purchased it by Reseller Toshiba, that I'm sure that you have the right one and you don't have to be worried about the features.

• Malfunctioning wireless on my A60

  I can't get the wireless lan to work, downloaded all the drivers possible on the support page, and none of them seemed to work. I don't have a cd (at least when I ticked the box last time), and I'm not at all other malfunction of my A60-122.
  install this Atheros client utility drivers and then all these graphically nice software with all your connections and it does not seem to recognize it.

  Please help me I'm a newb to notebooks :)

  Edit:
  laptop is running win xp pro sp2.
  I did the bios update to get rid of the blue screen (ati2dvag.dll - error)
  I have installed all drivers of
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Well, please help: Pei

  Post edited by: symbiosis

  Hello

  you have activated the Wifi card in the small switch on the left side in the corner!

  Also check if the wireless card is detected in the Device Manager! I checked the product sheet. and your A60 was delieverd with an Atheros card and drivers available on page driver Toshiba should work!

  Rudi Bye

• Satellite A200-1AG - malfunction of the built-in keyboard

  Hi all

  Update of the BIOS Toshiba Satellite A200-1AG, but the model was wrong, she was PSAE6E and should be PSAECE.

  So everything works ok, external USB keyboard, but using the built-in keyboard certain keys fail IE:

  pressing on * e * key I get "egg".
  pressing on * i * key I get "egg".
  pressing on * 3 * key I get "38".
  pressing on * 8 * key I get "38".
  pressing on * d * key I get "d".
  pressing on *, * key I get "d".

  I used a software to quickly show the key and I all 2 keypreses cases are shown.

  When I reflash / update the correct BIOS, the problem persists.

  This happens in windows under linux OS.

  What I could do, I think it's a software / BIOS firmware error (+ could be bios code of the keyboard microcontroller? +), but I'm not sure.

  I read some comments SLIC and bios MOD, but it is more difficult for me to understand. I don't know how and if it could be useful.

  Assistance may be useful.

  Thank you

  > So everything works well, also external USB keyboard, but the built-in keyboard some keys fail IE:

  This is not a BIOS problem
  You said that external keyboard work correctly, this means that keyboard controller and BIOS is OK, but in your case the internal keyboard started to malfunction
  This means that the internal keyboard needs to be replaced

  By the way: you can not Flash the BIOS to NOT compatible version fact is that the update of the BIOS supports some sort of protection, and the update process wouldn't start using bad BIOS.

• Equium A100 - malfunction of the laptop keyboard

  Hello

  I have a laptop Toshiba Satellite A100 and when I press u on the keyboard on that I get 8u, when I I I ki, press o, I get lo, press press 2, I get w2. I checked the keyboard for defects on the cable to the motherboard, also shortcut keys off.

  I tried an external keyboard and it worked well. I ended up buying a new keyboard which worked well for a while, and then all of a sudden, he started doing the problem mentioned earlier.

  I uninstalled the driver and then reinstalled it but no difference. I am running Windows XP Home SP3.

  I hope someone can shed some light on this problem.

  Thank you.

  > I tried an external keyboard and it worked well. I ended up buying a new keyboard which worked well for a while, and then all of a sudden, he started doing the problem mentioned earlier.
  You bought the new keyboard and it solved the problem for a while.
  Well, in my opinion, there are two possibilities;
  You had a great misfortune and the new keyboard started to malfunction too, or there is something wrong with the keyboard on the mobo controller.

  But it's just my personal suggestion and if you want to know what's not exactly then you should ask a Toshiba ASP in your country for a control of the laptop.

  By the way; I hope that you use the latest version of the BIOS.

• Device USB not recognized - device connected USB has malfunctioned and Windows does not recognize it

  I have a HP Pavilion dv4 laptop running Windows 7 Home Edition Premium and the USB ports worked well for a HP deskjet printer and an older Casio digital camera. Then one day, the laptop decided not to recognize the Casio digital camera and gave the error message "USB device not recognized" and also indicated that the device connected to the computer has malfunctioned. This prompted me to buy a new digital camera Canon. Well, a new camera has not fixed the problem. Now, anything that is connected to one of the 2 ports USB will not be recognized by my laptop. Help!  I am at a loss to understand this.  I tried using Microsoft suggested below:

  Suggestion 1: the problem with USB devices, uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond.
  USB controllers represent the USB ports in Device Manager.

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  b. expand Bus USB controllers.
  Note: you may scroll through the list to find this point.
  c. the first USB controller under Bus USB controllers right click and then click on uninstall to remove it.
  d. Repeat steps above for each controller USB is listed under Bus USB controllers.
  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
  f. check the USB device to see if it works.

  This has not fixed the problem.  Then the Device Manager, I tried to update the drivers on all the USB controllers and root hubs. While some may have received software updates downloaded, it still has not corrected the problem of unrecognized USB device after the computer is restarted.  I hope that someone knows the solution to this situation and can pass it on to me. Thanks for reading and any help display.

  Read previous messages revealed the solution for USB devices not recognized on my HP Pavilion as well as several other laptop models.  Shut down the computer and remove the battery and wait for about 15 minutes. Reinstall the battery and restart the computer.  USB ports are working to download pictures from my digital camera from Canon and charging a cell phone, etc...   I hope it helps others with this problem!

• hardware malfunction call your hardware to support provider

  Must have Windows Server 2008 R2 Standard license installed on IBM Blade Center Server, while being used, the blue screen appeared with this message...

  • Hardware malfunction
  • Call your provider of support material
  • The system stopped *.

  As repeatedly blue appears and the system will stop the State.

  Please note this point.

  1. I have Symantec Endpoint Antivirus installed with the automatic update enabled server

  2. I haven't added or installed new hardware or software

  3. the new amendments in the server

  Please let me know the exact solution.

  Kind regards.

  Pritesh Bhatt

  E-mail: * e-mail address is removed from the privacy *.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.