Malware blocking safe mode/updates / filevault

Similar Questions

• Restore SR5110nx infected by the malware in safe mode

  People... I have a Presario SR5110NX who has been infected with the garbage of privacy - CENTER.ORG.  The best way to get rid of it seems to be simply take out the hard drive.

  Unfortunately, the malware completely seized the machine.  It loads automatically when starting Vista, then when you try to shut it down, the machine hangs with a blue screen.

  I was planning to start mode without failure (F8), then go to the Recovery Manager and restore just C: as long as the plant.  But it will work in safe mode?

  Thank you!  Mike Nassour

  F-11 at startup does not work? You did the recovery discs?

• Why my VAIO VGN-FZ31S with Windows 7/Vista will only open in safe mode?

  I've been having a lot of trouble recently and think that it was caused by a virus.  However my Vaio only now starts in safe mode, and I have warnings that firewall is not on, and Microsoft Security databases are not executed.  However, I can't download MSE on the web, because I get an error message telling me that I can't download it because I am in safe mode.  Similarly, I get the same messge when trying to do other operations.  How can I get the computer opens in normal mode?

  Thanks for any help.

  sturrdave

  Hello

  Two suggestions for you.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  _____________________________________________

  Here's how you normally get out of fashion without failure:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Laptop won't start in safe mode. No sound in SafeMode.

  in my laptop suddenly virus enter so my pc is unable to start as usual so just now I he started as a safe mode and I'm not able to get all the sounds with any video that any body can help me for this problem

  Moved from feedback

  Original title: sound off to play

  Hello

  Audio does not work in Mode without failure.

  And you fail to tell us what is your operating system.

  Follow this information.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally? What other steps should I take in Mode safe?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  After a system restore to a time before Windows XP, should I leave Safe Mode and restart normally.  Completely restored restore operation the registry both before the intrusion of viruses if the date and time specified as the restore point is earlier than the time of the intrusion, but in the same 'on' the cycle of computer?  I have to do something else before going back to safe mode?

  Time as about 23:00 last night 7/29 restoration, first known intrusion by "XP Home Security 2012" was shortly after midnight 7/30.

  I ended up a sde.exe process, which stopped the pop-ups.  A full scan with Norton quarantine, JS. SecurityTool.  After a restart of the computer, the normal features of the programs has been lost by the "Run" menu or icons on the desktop.  By clicking on the icon for the normal .exe files redirected to the dialog box "select a program to open.

  I restarted in Mode safe mode with networking and then restore.  I tried opening IE and Excel and that they work properly in Mode without failure.  They will work correctly when I leave Safe Mode and restart normally.  Should I test other specific applications.

  XP Home Security 2012 seems to have accessed or modified some files to DropBox (not sure how this program was installed, but it was already on).

  Should I delete all DropBox files, just those showing a modification date corresponding to the intrusion of XP Home Security 2012, or don't you worry about this?

  System Restore IS NOT the way to remove malware. The reason why you do not see the effects of the malware in safe mode is probably due to the fact that the process for most malware does not load in safe mode, and therefore not active.

  Restart the computer in Safe Mode with network. Click HERE. Download Malwarebytes. Update Malwarebytes and perform a full scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. Run a full scan quarantined found anything yet. Restart your computer in normal mode and perform a quick scan with Malwarebytes.

• Firefox worked FINE yesterday and it auto-updated and now whenever I load the Web site, it crashes immediately, even in safe mode. Help please?

  I tried the following-
  refreshed Firefox
  uninstalled/reinstalled firefox
  safe mode
  removed the malwarebytes program due to work for someone else
  has ran my spyware, zero results returned

  Chrome works very well. Everything else is fine. Firefox had no problem until it auto update last night. I can't submit a crash report because every time he asks me I say Yes and then he tells me 'problem presentation report '.

  This looks like a problem with the NVIDIA Network Access Manager.

  • BP-db6d3841-B1A5-49B3-b0bf-4bdac2151222

  There is a version of Firefox 43.0.2 planned to block this NVIDIA driver, you can try to install through this site:

  • http://download.CDN.Mozilla.NET/pub/Firefox/releases/43.0.2/Win32/en-us/

  Otherwise, you can check the control panel so you can find "NVIDIA Network Access Manager" or "NVIDIA ForceWare Network Manager" and uninstall this software.

• As updates of last week that Firefox crashes every time to open google maps even in safe mode

  Last week Firefox updated itself, and there was a java update also. Since then I couldn't access google maps in my browser, whenever I get the gray background and then blocked FF. Have you tried to erase the cookies, safe mode, disabled the few plugins installed and a complete reinstall... same problem.

  Completely fed up with this

  There's a 37.0.2 provided on-demand which should be released in the coming days.
  The Release Notes are already online:

  • https://www.Mozilla.org/en-us/Firefox/37.0.2/releasenotes/

• The latest version of firefox keeps crashing. It still crashes in safe mode, and I recently cleaned al malware, etc. What can I do to fix this?

  Firefox crashes several times in a single session. It started to happen after I updated Firefox to the latest version. He always breaks even in safe mode. I also cleaned of malware, etc., and it crashes. What can I do about it?

  BP-ca3e93bc-253D-4404-BA78-13da02130813

  I deleted the tab by default, "my searches", and I chose a home page. Thank you for your response.

• Firefox crashes on opening a few seconds. has all of a sudden started several weeks ago and I have not been able to get since. I reinstalled but update did not work. It will not be open even in safe mode. Help!

  Firefox crashes on opening a few seconds. That started everything suddenly a few weeks ago, and despite several attempts to every day, I still cannot load firefox application. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode.

  Heather, not sure I can help, I'm not a Mac user, but I'll have a look at the crashIDs that you provided.

  Update:

  • Crash report ID: [6326058f-1fca-4d4d-a080-af8902120119]
    • signature: TFont::CreateFontEntitiesForFile (const char *, bool, TSimpleArray < TFont * > &, bool, short, char const *)
  • Crash report ID: [69534b6f-7662-4c09-bf2e-39fff2120104] signature as above

  There are very few reports recent crash with this signature, they could even be your plant. If you follow the suggestions in the article I linked above there is not much that can be done easily. You should try discount the possibility that the cause is malware by scanning with several updated tools.

  Malware controls
  Have you seen and followed the advice

  • Fix Firefox problems caused by malicious software
  • the first step trying to detect malware, a typical suggestion is this message from the-edmeister /questions/914980 #answer - 302372

  Clean reinstall it
  If you find no malware, it can be interesting to try a new re - install and a clean profile, none of them are simple and must be done with care, so first try malware scans, those who will take a while to sort.

  Rather a last resort: fill out a bug report
  
  If you are ready to try to answer the inevitable questions and have an email account anonymous, that you can use for recording, you can follow the link from the report above and click on 'report' to create a bug report on the crash.

• Update manual Windows in safe mode?

  Hi all

  I managed to majorly screw up my computer while trying to fix it.

  I'm here now via SafeMode w/network.  I'm working on another site that has been very helpful in the past with a tech. So I think we have finally got rid of a nasty virus, we also got rid of some important issues due to remove it manually since the combofix program would not work.

  Rather than try any on, I'll post a link to my thread of origin on the other site, because it has ALL the details.  I hope that's not a violation of the terms here.

  http://forums.techguy.org/malware-removal-HijackThis-Logs/881001-virustool-virus-among-others.html

  I thought maybe I could update windows and fix but since windows update does not load in safe mode, I thought that I could download and update manually. But I have no idea what updates should I download to do this, even if I knew where to find them.

  Thanks in advance

  You said that you could get in safe mode. From there, you should be able to locate your download and if all goes well to copy it for flash etc and save all the other files that you can. Remember, however, that whatever the bad guy did the damage could also affect your files that you want to save.

  Another option is to contact manufactuer Poser 8 to get another copy. You will have to pay extra for it, but at least it can be an option.

  Good luck.

  FYI Drive Backup free edition
  http://www.Paragon-Software.com/home/DB-express/index.html

  You may be interested that when things are back to normal. TaurArian [MVP] 2005-2010 - Update Services

• Computer Vista starts in safe mode, it is impossible to remove malware

  'Vista' of computer starts in safe mode. AVG on and execution of 52 Trojan detections and system leave not Malbytes {sic} program remove them. I tried all of the obvious solutions. Also I can not save and restore any files there I MISS my XP!

  oxooccc0e

  Hello

  See the following message to use to restore access to Windows AFTER you'RE sure that the machine is
  Malware free.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After Malware that my login is disabled cannot start in safe mode

  Hi if anyone can help.

  A friend tried to watch movies online, I'm not sure of the site they visited, but were asked to install MacKeeper and I believe that they did, as I noticed it was to download and installed the following day and I asked them why they did this and they said it was the only way to watch movies!

  Anyway to cut a long story short my friend then called me to say they received a "pop" window to say that my computer has a virus and call a number of 1800... I told them to do nothing certainly not call the number and I would like to sort.

  So basically since then that then I can not connect to my main account at the start, the section where you type your password won't let me type into it and there is a symbol of the brand of 'question' next to it. If I hold my mouse over the question mark I get a dialog box stating "Please enter your password to iCloud as... as well as the date. I can only login as a guest and I cannot connect in 'safe' mode by holding down the SHIFT key.

  I deleted the MacKeeper Application (and also another OS player application that is newly installed the same day!) and empty the memory cache of my browsers and also now upgraded to 10.11.6

  I also run disk utilities, but still I'm getting this problem trying to connect to my main user account!

  I think that it is some kind of malware, does anyone have ideas how to solve at least the connection problem?

  If I could stamp out to see if there is any malware stuff going on behind the scenes it would be too great!

  All suggestions welcome.

  Thanks, Ciaran

  

  How did you uninstall the MacKeeper application? Please be as specific as possible, unless you have followed the steps, I suspect that your system has installed to uninstall. If this is the case then you will need to re-install and uninstall immediately by following the instructions of developers. Otherwise, the best thing to do is to do a wipe and installing OS X and then manually install your applications and restore your data from your Time Machine backup.

  I'm sure you probably learned to not let this 'friend' enter the 100' of your computer.

• Updated the last updated Aug.5 2016 and be over three quarter turn, I want to start in safe mode, all responses.

  Update will not finish, want to start in safe mode, please help.  It's updated Aug.5 2016.

  Start in Safe Mode. What do you expect to make? You must do this:

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• Update 40.0.2 is slow, hangs a lot, even in safe mode.

  So, I tried several things in the troubleshooting here in support articles, but none solved my problems.

  Basically, after that automatically put Firefox updated to 40.0.2, the browser crashes a lot on the opening and closing of tabs, loading Web sites as well. When idle, the CPU/RAM usage is normal, but opening or closing of tabs uses a lot of CPU (most of the time, 100% of the CPU is used in navigation) and it crashes every time. Scroll to the bottom of pages also allows the browser to hang. I tried to deactivate several plugins and extensions and I even tried to use the safe mode, but even in safe mode, it happens constantly. I'll post the specs of my computer (no), but don't forget that those issues didn't happen before the update.

  Core 2 Duo 2.93 GHz
  4 GB OF RAM
  Windows 7 Ultimate 32 bit
  GeForce 8400GS

  Please, what is anyone has found problems with this new update? What should I do? I use Firefox since 2007 and I love it, I wouldn't move to another.

  Create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  Start the computer in safe mode Windows with network support (on the startup screen, press F8) to see if it has an impact.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/
  • http://www.7tutorials.com/4-ways-boot-safe-mode-Windows-10

• Thunderbird updated, now will not be opened except in safe mode.

  I'm one of those typical Thunderbird update notice yesterday, asking if I want to install this update now, or something like that. He concludes by saying: Thunderbird needs to restart and I wanted to restart now. I said yes, and Thunderbird has not opened since. It won't open unless I press 'shift' for the safe mode - and even in this case, only after, I go to the Windows Task Manager (Vista) / processes, and at the end a process with the name "Thunderbird" if necessary.

  The lightning should work just fine, but something may be broken in your profile. Uninstallation of lightning would be a temporary workaround if your are ready to continue to troubleshoot the problem. You like.

  You can uninstall Flash through the add-on Manager.
  Tools (Alt - T) - Add-ons-Extensions
  Press 'delete '.