manage user-based controls

Similar Questions

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• How can I permanently disable and remove the User Account Control (UAC) on Control Panel?

  This feature on Windows Vista is really annoying when you do a presentation. I want to permanently disable and remove from the control panel.

  Hi Eyngel,

  If I understand you correctly, you want to disable or delete the user (UAC) of your computer access control.

  You can turn off the UAC, but do not remove it completely from your computer.

  You can let on that it is one of the security features of Windows Vista.

  To turn off the UAC:

  Go to control panel > user accounts > manage another account > at bottom of the page delete the control on the use of user access control.
  It should ask you to restart the computer to complete the process.

  I hope this helps. ----------------------------------------------------------

• Problem of UAC (user account control)

  I've had this problem for quite a while now, and it's really fustrating. I can't download anything without the UAC (user account control) asking me to enter my administrator password. I know, but, in the UAC dialog box, I do not see where to enter it. Problem with UAC, impossible to make changes to my laptop. I can't change my security settings, download from the internet...  Please help me

  Hello

  You can enable UAC who do a lot.

  You can also enable the UAC SILENCER or STOP if it lowers you the level of security.

  THIS UTILITY MAKES IT EASY TO

  http://www.tweak-UAC.com/
  Tweak UAC utility - easily put UAC into Silent Mode or POWER

  --------------------------------------------------------

  To solve the problems:

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed. References to Vista also apply to the
  Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  If necessary:

  To make another account with your same password - ADMIN upgrade - REBOOT (do not only closing session) and
  connect that account - you can download to use it? (do both ADMIN - one accounts in case that you
  migrate to it and another to test and difficulty).

  It while in the new use of the account to LOWER your account regularly APPLY / OK to need - and then lift back
  for the ADMIN - repeat several times - descent - go downstairs - raise - repeat. This allows to clear corruption.
  Make sure that the account administrator.

  Try your downloads into the new account.

  If necessary later this is the process to fix a damaged account or migrate to a new.

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------------------------------------

  Then connect to the old account and try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• The Windows 7 user account control settings does not open

  Hello

  Someone knows a problem where a computer launches the application "change user account control settings?  We are dev work on multiple PCs and need to disable this feature.  Normally, I would run the UAC and just drag the bar down, but I can't even the application to load.  I even tried running: C:\Windows\System32\userAccountControlSetings.exe and it does nothing.

  Thank you
  Sean

  Well, I was not able to understand why the window UAC doesn't appear, however, I managed to disable UAC via the local policy settings.  For reference purposes:

  1. Start > run > gpedit.msc
  2. Computer configuration > Windows settings > security settings > local policies > Security Options
  3. Then define:
  4. User account control: behavior of the guest of elevation for administrators in Admin Approval Mode – set its value toElevate without asking for confirmation.
  5. User account control: detect application installations and prompt for elevation - set its value todisabled.
  6. User account control: only elevate the UIAccess applications that are installed in secure locations - set its value todisabled.
  7. User Account Control: Run all administrators in Admin Approval Mode - set its value todisabled.

  Sean

• User account control is always Pop up hpDST.exe

  I get a msg from user account control... want to allow you... unknown pub, original Dr. hard hpDST.exe.   He is not happy with an answer Yes or no and continues to return.    Apprec any help.  Thank you.

  Hello

  HpDST.exe is a type of EXE file associated with the Installation Manager developed by HP for the Windows operating system.

  HP Setup Manager is a software developed by Hewlett-Packard. It is usually installed with most of the new Hewlett-Packard computers.

  You can uninstall HP Setup Manager from your computer by using the Add/Remove Programs feature in the Control Panel window.

  1. In the start menu (Windows 8, right-click right lower left corner of the screen), click Control Panel, and then, under programs, do one of the following values:
     • Windows Vista/7/8: Click on uninstall a program.
     • Windows XP: Click Add or remove programs.
  2. When you find the HP installation Manager program, click it, and then do one of the following:
     • Windows Vista/7/8: Click on uninstall.
     • Windows XP: Click on the tab to remove or change/remove (to the right of the program).
  3. Follow the prompts. A progress bar shows you how much time it will take to remove the HP Installation Manager.

  Once done, you can go to the HP support site and reinstall the HP configuration manager.

  Kind regards

• ASA VPN - allow user based on LDAP Group

  Hello friends

  I have create a configuration to allow connection based on LDAP Group.

  I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

  http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Anyone know how I can do?

  Thank you

  Marcio

  I like to use the Protocol DAP (dynamic access policies) to control this.  Follow this guide:

  https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

• In Windows 7 user account control

  Hello

  I have a PC with Windows 7. I downloaded Magellan Content Manager to manage my new GPS Magellan, but whenever I double-click on the program to execute, User Account Control stands up and says: 'do you want to allow the following program... '. ». Is it possible to get the account control user to recognize that I have confidence in the program? I have a number of programs that I downloaded from the Internet and it is not disputed any of them except this one. Any suggestions?

  First of all, is your account of usual user "Administrator" or "Standard user"?  Go to control panel > user accounts for know.

  Even if your account is an account 'Administrator', Windows 7, local administrator accounts run as a standard user except when specifically authorized to do otherwise.  In other words, if you have not made any changes to the system setting, when you try to do something that requires administrator privileges, you will get a UAC prompt.  The difference is that if already logged in as a local administrator, the prompt will ask just for your authorization, like this:

  

  However, if you are logged as long as standard user, you will be presented with a list of accounts local administrator on the computer and an application to enter a password for one of them, like this:

  

  Because you get the UAC prompt when you try to Start the program, the question is not what the program could eventually do after it is started (for example, try to save files in system folders), but that the program be appointed - by the code in the program itself - as an "administrator task", i.e., a task that could potentially accomplish administratove missions.  Most applications that are referred to thus show a security shield on the shortcut for the task icon...  I guess the shortcut of the content for your Magellan Manager has a shield, like this:

  

  I have not tried the following, myself, but this tutorial is intended to be a way to perform a task that normally should be 'high' without causing the UAC prompt to appear, but only if logged in as a local administrator, not a standard user--> http://www.sevenforums.com/tutorials/11949-elevated-program-shortcut-without-uac-prompt-create.html

• IOM - e-mail notification to a specific user, based on a dynamic State

  Hello, after creating the account in a particular target resource I need to send an email to a specific user based on the location of the user (for example area admin).
  
  In the notification of tasks tab, I see only "assignee", "Applicant", "User", "User Manager"? How can I reach the requirement specified above?
  
  Before asking this question, I tried to search the Forum of all previous posts related to it. But I could not find. Maybe I wasn't with the right keywords.
  
  Any help is appreciated. Thanks in advance.

  You will need an adapter to send the email, then you can send to any user, you want a custom code. Create a new task and it trigger the response of completion code. You can use the following APIs:

  sendMail tcEmailNotificationUtil = new tcEmailNotificationUtil (ioDatabase);
  sendMail.setBody ("your body here Type or use a string variable");
  sendMail.setSubject ("Type your topic here or use a string variable");
  sendMail.setFromAddress ("[email protected]");
  sendMail.sendEmail ("[email protected]");

  Just fill the rooms above with the necessary information.

  -Kevin

• WWhy does User Account Control como upwhen I click on the logo of Firefox?

  I have Windows 7. For the last 2 weeks, when I go to Firefox on my user account control window appears and asks "do allow you the following program to make changes to this computer?

  I say Yes. This happens whenever I click on the Firefox logo. How can I avoid what ODM?

  Hi zamler, sorry for the response not related.

  I don't know what are the causes that...

  If you right-click on the icon > properties > Compatibility tab, can you ensure that "run this program as an administrator" is unchecked?

• Toshiba E-Studio printer - want to manage user impression in HIGH-LEVEL

  Hello

  I have several Toshiba E-Studio printers and I want to manage user impression in HIGH-LEVEL (my users are in Active Directory in Windows 2003)

  I tried but I can not connect department code with users of the AD and I keep getting my printed documents as invalid.
  I hope someone here will know how to solve this problem

  Thank you

  I have fear of m in this forum you will not find the printer experts.
  Most of the users here in this community are common for laptop / tablet or multimedia enthusiasts.

  But I found this page of Toshiba's interactive training manuals.
  http://business.Toshiba.com/USA/support/training/index.html
  These tutorials can help you learn how to perform various functions to your device e-STUDIO user

  It might be useful for you.

• After that Win7 SP1 firefox Gets a user account control prompt every time I open it.

  After installing the windows 7 service pack 1 update, whenever Firefox is started I am invited guest UAC (User Account Control) to ask my permission because he will try to make changes. My UAC setting is enabled by default and reinstall the latest version of Firefox (3.6.13) does not alleviate the problem.

  Check that you are not Firefox running as administrator.
  
  Right click on the desktop Firefox shortcut and choose "Properties".
  
  In the Compatibility tab, make sure that this level of privilege: "Run this program as an administrator" is not selected.
  
  You should also check the firefox.exe program properties in the Firefox program directory.

• ATI Catalyst Install Manager and Catalyst Control Center help

  I just run the Windows 7 upgrade

  report from the consultant and he said that I have to uninstall the ATI Catalyst Install Manager and Catalyst Control Center and then reinstall after upgrade...

  Could someone direct me to where I could t find these programs for Windows 7

  You should not do this. Just proceed with the upgrade installation.
  On my Satellite, I got the same message, but I just kept with upgrade.
  At the end everything went well.

• Why User Account Control allow me on IE without permission after resetting IE

  A few days ago I couldn't get on the Internet because IE would not work and internet connection was ok so out of desperation I did a reset of the EI. It still does not work then a member of the family came and got it works, but now I get the popup to permission to the user account control every time that I log on the desktop by clicking the shortcut of IE.  I went into the folder security and disabled UAC and now I only get this popup whenever I click on the desktop IE. This never used popup lights up when clicking on the shortcut of IE, so something must have happened when I did the reset Internet Explorer.  Does anyone know how to keep control of user account for all but IE?

  I have a feeling that I accidentally changed a setting on IE and probably should not have an IE reset.but now the problem is that I like to keep the popup of User Account Control permission for everyone, but the IE shortcut on my desktop.

  Furthermore, family member right clicking on the desktop for IE shortcut and did something with run as administrator to get IE working again.

  My nephew looked at the problem that I had some time ago, but I told him to forget it because he really didn't have time to work on it. I just kept off UAC all these months and had no problems I do not download anything that I'm not sure. However, a few days ago I went back to this problem. I tried checking with the Compatibility tab, and as said above "Run as Administrator" was unchecked. This time I went to the contextual on properties of Internet Explorer and click on Advanced tab. Then I unchecked the run as Administrator box and I went back and UAC enabled and everything works well. Without UAC popups more!  I also did this for the exchange of information in the start menu and on the Quick Launch bar. For some reason any one on the keyboard had worked this time (he had not earlier) without a popup UAC even before I made the changes.  This is exactly what made me do some exploring more to see if I could get the other IE shortcuts to work.

  I believe that another Member of my family who had helped me to get IE to work when I had problems to make on the internet even after a reset IE active the option "Run as Administrator". He has not been bothered by the popup and said if I was annoyed by it just turn off like he said I had a very good program antivirus (Norton) installed on my computer and it always warns you if a program you want to install is safe or not safe.

  Hope this might help someone else who may have this problem.

  Holly

• Why is my user account control is disabled

  Why run fix it I noticed it says that my user account control is disabled. Don't know what or why it is.

  Hey Leeslone,

  The first link posted by Umesh explained what was the user account control.
  Who answered your question?
  If this isn't the case, you can re - explain your question?