Management e-recovery of Acer 1640Z laptop (Windows XP) is NOT AVAILABLE!

After crashing this laptop XP 2 weeks ago and successfully restaurant then to work through factory setting, etc., and advice in this forum, I find that I can't access Acer e-Recovery Management.

Is there a way I can re - install the recovery management?

Clyde, success at the end. After the display of the foregoing, I turned off the laptop and then restarted, by pressing F2.  The D2D recovery item has been disabled, so I changed that "enable".  Looking in Acer Empowering Technology and clicking on the e-recovery management, I now have access to one.

Given that I was exploring e-recovery management a few weeks back and clicked on a wrong measurement, it caused the laptop down.  I will be careful to use e-recovery until I fully understood what it says in the manual.  I use Macrium Reflect for backup, normally, it will contine with that for now.

Thank you for your interest and your help.

Tags: Acer Laptops

Similar Questions

  • When I try to open windows store addresses; Windows store is not available on windows to make the workspace

    whenever I try to use the store windows (open) I get this message: "windows store is not available on windows to make working space.

    what I have to do to get it working as I want to be able to download applications

    I have exactly the same problem. The store was working but now I get the message "Windows store is not available on windows to workspace" even if it is installed on a laptop. I checked the system information and everything seems fine (windows 8 pro active) but I have recently changed my HDD and I wonder if this has something to do with it. I cloned the old drive to a new one and I continued from there - do not know how this would happen as I thought it's only the Enterprise version that is able to create windows to readers.

    Tried the method in the post above and resets some security settings, it has not cured the problem. I think that the resolution of the screen is a bit a red herring, as I have already used the store on this machine.
  • Unable to connect to Windows error Windows store is not available on the workspace Windows To Go

    Original title: problem opening Windows Store

    When I click on Windows Store I get the error message "Windows Store is not available on Windows to GB workspace.

    How can I fix it, I use a desktop computer not a laptop

    Thank you

    exactly the same problem but I don't have windows 8 pro edition so I can't use gpedit.msc any idea to solve this? I tried all five options and none worked.

    BTW, I think it's STUPID friggin of microsoft to have as much of the element related to group policy, but not GPedit.msc on windows 8 regular edition!... friggin delayed.
  • When I run update Advisor it tells me that Windows 8 is not available for download online in my area?

    When I run the Upgrade Advisor, it tells me that Windows 8 is not available for download online in my area - why is this?

    Original title: upgrade to Windows XP

    Windows 8 or 8.1, is not a free update, it is not yet extensible through

    Windows xp, they are'nt compatible. A clean install is required. In addition,

    BONES need a lot more material PC to run, try this link for

    material.

    http://Windows.Microsoft.com/en-us/Windows-8/what-is-PAE-NX-SSE2

  • When you try to download Silverlight, I get a message that says that Windows Installer are not available.

    Windows Installer is not correctly installed

    When you try to download Silverlight, I get a message that says that Windows Installer are not available.  Windows install is not properly installed.

    How can I fix it?

    I am running XP Home Edition.

    Thank you

    Hello

    1. you try to directly run the silverlight program without saving it on the computer?

    Run the following article fixit tool and check.

    Diagnose and solve the program installation and uninstallation problems automatically

    http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  • Sorry, Windows 8 is not available for purchase online in the country, in that you are. I'm in Iowa.

    I am trying to upgrade my computer to Windows 8, but after that I put in my product key, it says "sorry, Windows 8 is not available for online purchase in the country/region, you're in." I tried it on two different computers on two different sources on the internet. So I think that it's the product key, but I don't know and I don't know what to do.

    Hello

    From your problem description, I understand that you are not able to buy Windows 8. Please let me know if you do not experience this problem.

    I suggest you to contact Microsoft Support and buy windows 8.
    https://www.windowsupgradeoffer.com/en-in/home/ContactCustomerSupport
    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

    Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

  • Windows store is not available in your area

    Hello
    I live in Iran and when I opened the store windows this massage will display:
    Sorry, windows store is not available in your area.
    How can I use the windows store? Please help me.

    The Windows store is not available in all countries. Here is the list of supported countries and the Iran is not listed as one of them:

    http://msdn.microsoft.com/en-gb/library/windows/apps/hh694064.aspx .

    I'm not a lawyer or an expert on international issues, but this peut be relevant too:

    http://www.microsoft.com/en-us/exporting/faq.aspx .

  • Sorry windows store is not available in your region, Myanmar

    Hello
    I am sorry to show store myanmar as this "windows store is not available in your area.
    all the other app works and internet connection
    I want to know why
    Please
    4 I'm sorry my bad eng

    CAN U SEND TO MY MAIL ON THE WAY. MY MAIL IS * address email is removed from the privacy *.
    MY COMPUTER IS NOT SURFACE LAP
    Thank you

    Ahh... you see, I do not see your email address because it has been deleted automatically. OK... in any case, here are a few questions.

    1. do you have YourFreedom?
    2. If so, do you have OpenVPN installed on your system?
    3. If Yes, do you know how to use VPN via YF and relay the VPN?
    If you don't know how to question No. 3, I suggest you to meet me in person.
    Please send your e-mail as follows.
    1. your e-mail without a domain (IE, your log in name).
    2. your domain name (eg. gmail.com or hotmail.com)
  • "Windows 8 is not available for download in your country/region. I live in South Carolina?

    "Windows 8 is not available for download in your country." I live in South Carolina?

    Hello

    Please, try to change the locale of the system , such as described in the following article and see if it helps you:
    Hope this helps, good luck :)
  • Interrupted for laptop - Windows 7 does not start

    M6 computer - laptop - HP pavilion

    Operating system - Windows Home Premium

    Unfortunately I dropped this computer from a height of 4 feet after closing it.

    Since their start-up is not possible.

    I started the "the option computer repair"-it seems to start but then hangs indefinitely.

    Al the other options safe mode, safe mode with networking, etc., including "start windows normally" do not start and all back to 'Repair your computer' which still once blocks indefinitely.

    I tried to get the recovery option by turning on the computer by pressing F12 repeatly before the windows logo appears.

    The system recovery words appear, but I again picked option 'Repair your computer' which once again blocks indefinitely.

    Advice please - the situation seems hopeless. ?

    Concerning

    Flynne

    ______________________________________________________________________________________________________

    Thank you for your quick response.

    I managed to get the option of recovery has begun and now my computer works well.

    I ran a disk check and all sectors appear to be intact.

    I'm very lucky to get away with this.

    I have discovered that my computer is equipped with a device that limits or prevents damage to the hard drive.

    Thank you for your interest.

    Concerning

    EFLYNN

    _______________________________________________________________________

  • Computer laptop Windows XP does not start? Help

    Hi I have a windows xp laptop I think that their system eis or something like that... Whenever I start the laptop, he's going on the error you get when your dosent laptop shut down correctly. If I click on start normally the bar will spend about a quarter of the way and then just stayed forever and only safe mode also gets a freeze from then. Y at - it something wrong with the laptop or what. How can I get my laptop to work again... someone help me please.

    It is up to tell you to us what brand of system and the model is... not "system ist or something like that."

    When you choose to start safe mode and you can see all the stuff being loaded and the system crashes, which is the last line on the screen to say?

    If you attached an external equipment, especially USB devices, disconnect everything and then you can see if things seem better.

    If you get an error message windows system config, exactly what he says?

    No error paraphrased messages please!

    It was something like this:

    Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Which usually indicate some sort of corruption of system files may be a loss of power, aborted reboot or abnormal termination? (This includes the plug pulling, buttons power and removing the battery).  None of this seems familiar?

    If you can boot from a CD, you can create a CD bootable XP (no XP media required) Recovery Console and run chkdsk with correction of errors on the afflicted to start System.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget what you have (no XP media required).

    This is not the same as recovery disks that might have come with the acquisition of the system store.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • computer laptop Windows vista may not start

    I have a laptop windows vista that can not boot up to windows

    1. when I on the laptop, it loads a black screen with 5 choices
    1. safe mode
    2 network in safe mode
    3
    4 last configuration:
    5 launch the window normally
    I tried to enter in all of the choices of 5... whatever choice I go, the laptop will just keep loading and loading and loading forever bar and I waited 15 minutes and finally the computer laptop 1 blue screen flash and it has restarted and it loads again to the black screen with 5 choices
    No idea what can do with him?
    Please help me.
    Thank you

    Hello

    ·         What is the full error message?

    .         Were there recent hardware or changes to the software on the computer before the show?

    I suggest you to remove the devices connected to your computer (except keyboard and mouse) external and check if you can start the computer.

    Method 1:

    You must disable the auto restart in case of failure system on your computer and note the error message receive you on the blue screen and you need to post back to us.

    To do this, you must start your computer on the Advanced Boot options , and select Disable automatic restart in case of system error.

    Follow this link provided below to start your computer in Advanced startup options.

    http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

    Method 2:

    Follow the steps in the article, and check if that helps.

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

    http://support.Microsoft.com/kb/958233

    Method 3:

    If you have Windows Vista DVD you can try running the Startup Repair and the Tool of diagnosis of Memory Windows to check and Windows Recovery mode if it helps.

    What are the system recovery options in Windows Vista?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    Alternatively, you can use the command prompt on the recovery mode windows to perform analysis and error correction on a drive letter of your choice by running "chkdsk x:" where x is the letter of your drive. Type the below command on command prompt, and then press ENTER:

    X:\>chkdsk/f

    /F Corrects errors on the disk

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  • computer laptop Windows 7 saves not CD / dvd

    my computer laptop windows 7 is no recorded any cd / dvd... Ive checked everything on my computer and online, but couldn't find a solution! does anyone else have this problem? If so how do solve you this problem? Help, please...

    Hello

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and


    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Screen on my laptop Windows 8 will not load?

    The home screen on my laptop Windows 8 (Asus) is not at all responsible. The start screen is the page where you have all the applications, and you can customize the background as well giving him different combinations of colors and patterns in different model. My splash screen background color is between clear and dark green. Just as I said, the splash screen does not load. It's been like that since I've been on the phone a few hours ago - this means that none of the app buttons that show the applications load, and when I search apps, nothing will come either. It is only up like green color background, that I mentioned earlier. I'm worried when I go about it tomorrow, I won't be able to go on any of the applications, making me not to go on my laptop at all. What should I do?

    Hi Daniel,.

    Thanks for posting your question on the Microsoft Community forums.

    I understand that the splash screen does not load in your system to Windows 8. However, I would like to know some more information to refine the question and provide you with better assistance.

    1. What exactly happens when nothing loads on the screen? Do you have only a black background or color without any apps?
    2. What is the model No. for your ASUS notebook?
    3. How did you install Windows 8 (a new installation or an upgrade installation)?
    4. You did it any significant hardware or change software on the computer before this problem?

    This issue could be due to various reasons like an incompatible device or a bad installation or because of some corrupted Boot files. If you are unable to boot your system, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    To check if this problem is due to a compatibility issue with external devices, I suggest you to disconnect all external devices and check if the problem persists.

    Method 2:

    If you have the disc to install Windows 8 with you, you can insert the installation disc and enter the Windows recovery environment for auto repair. See the following steps:

    (a) when your computer starts, wait for the logo of the manufacturer check the option of start menu, it will usually F12.

    (b) restart the computer, press the Boot menu option key to enter the boot menu and change the option to boot to DVD rom

    (c) Insert the disc of Windows 8 and restart the computer, it will boot to the Windows recovery environment.

    (d) click on Troubleshooting, advanced option and then click on auto repair.

    Method 3:

    If you have a disk to install Windows 8 with you, then I suggest you to perform a verification of the file system. System File checker (SFC) scan is done to check if there are any corrupt system files that might cause this problem. See the following steps to perform a scan SFC:

    (a) follow the same steps above to enter in the Windows recovery environment.

    (b) click Troubleshooting, then Advanced options , and click command prompt.

    (c) in the command prompt, type the following command: sfc/scannow , and then press ENTER.

    (d) now, to restart the computer.

    (e) check if the problem persists.

    If you are able to start on the screen, then I suggest to try the steps posted by Praseetha K Nair said on November 18, 2012 in the following link:

    Windows 8 start screen and Apps does not

    Warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Computer laptop Windows 8 does not properly connect to 8.1 Win mobile wifi hotspot - connection indicated as 'Limited' (no internet connection)

    Hello

    None of our laptops Win 8 appear to be able to connect to a wifi hotspot (internet sharing enabled, and apart from the wifi on the handset) provided by our Win mobile (Nokia Lumia 635) 8.1, there seems to be a connection between the phone and the laptop, but it is presented as 'Limited' (no internet connection).

    Same phones can provide the internet connection through the internet even setting for laptops Windows 7 without any problem of sharing.

    What additional settings are there to win 8 laptops that require an adjustment?

    Thank you!

    Hi Susanna,.

    Welcome to the Microsoft Community Forum.

    I understand that you are unable to connect your laptop 8 Win to Wi - Fi hotspot. I appreciate your efforts to solve this problem, I'll probably help you with that.

    Check the following Microsoft Help article and if you have activated inhalers of Internet connection on your computer, it will lead to problems of this kind.

    http://Windows.Microsoft.com/en-us/Windows-8/metered-Internet-connections-FAQ

    If the problem persists, try the procedure described in the following Microsoft Help article and then check if it helps.

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See also the following Microsoft Help article.

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

    Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

    Thank you.

Maybe you are looking for

  • ITunes won't convert to mp3 since the update

    ITunes won't convert to mp3 more since the last update. Think Ive tried everything and was working fine before. IM on windows.

  • Qosmio F50-114 - how to use the video cable?

    HelloI have a Qosmio F50-114.I want to capture video via the video cable supplied with the computer. The computer came with a video component cable software plug-in (1 x 3, 5mm - 3xRCA white/red/yellow). The only place in the manual stating that cabl

  • Satellite C660 - use battery or adapter?

    I want to know when my C660 battery is fully charged if it is best to unplug my adapter and use my battery power or even allow to use adapter?

  • How can I run the malicious software removal tool?

    My apologies in advance if this seems trivial, but all the articles I have read on the forums refer to download (easy bit) and run the MSRT tool, but are rare on how to actually run it. Or if it runs automatically as part of Windows Defender?  I'm su

  • you leave app still reported as "current usage"

    I have found that right out of my application, I can't delete it without a full reboot of the Simulator. ("BOLD" of blackberry Simulator). I get the message "" appname"is currently in use. Are you sure you want to delete? » If I choose Yes, then he s