Management in Flash of color (& secondary display)

Similar Questions

• Secondary display color problem

  I've seen several similar questions posted, but I can't seem to understand this one. This question has recently started to happen only in Lightroom 4 and continues to be a problem for me with Lightroom 5. It happens not in Photoshop CS5.

  I have a Dell laptop and a Samsung monitor that I use as secondary display. Lightoom images appear correctly on the screen of the computer, but not on the external monitor Samsung. Both screens have been calibrated with ColorMunki Display. As you can see in the screenshots, other images, like the desktop wallpaper make fine on both monitors. Images in Photoshop CS5 and other image software visualization also make good on both monitors. This issue has not always been a problem, he began to appear about 6 weeks ago. Any thoughts on what could happen? See screencaptures below.

  Thanks in advance for any help you can provide.

  Jon

  LR5 computer laptop screen:

  

  LR5 external display:

  

  The LR5 laptop display:

  

  LR5 external display:

  

  PS5 laptop screen:

  

  PS5 external display:

  

  What happens when you re - calibrate the displays? These symptoms are very typical for the bad monitor profiles. Photoshop ignores just while Lightroom will tip upwards. It is not inconceivable that a software update wiped your calibrated profile and windows can use a color profile canned, which are terrible usuably. Also make sure you have your calibration software to create icc v2 profiles. Lightroom v4 had problems with v4 profiles.

• My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

  

  My Adobe Flash CS6 color picker has WEIRD colors. I use Mac Mini OSX 10.8.1. Is there a solution?

  I click on the color picker and where I saw the normal color #0000ff blue on my windows computer, this version of mac mountain lion shows a color purple-ish. Strangely, if I enter the # hex in the color picker and use it as a filler, the correct color appears on the scene, but when I use the pipette on that color, it shows as purple color again on the toolbar.

  I saw something similar to this happen when you use adobe photoshop. However, the usual solution is just to do the color management profile to monitor RGB. The only drawback with Flash is there is no preference to set. The palette of colors in Adobe Photoshop displays as it should with correct blue.

  I should also mention that I use a Samsung 941bw monitor with my mac mini, which could also be part of the problem.

  I thought I would make this post anyway, just in case it's the OS & Adobe Flash CS6 and not the monitor.

  I've included a screenshot over which shows that I chose the color purple and then did a form of a rectangle on the stage and it comes out blue.

  Thanks for your response (s)

  -Line

  You can try to change the display settings of your monitor in Adobe RGB color (1998).

  System Preferences > displays > color and see if that helps.

  Thank you

• Adding color to display

  I note in calendar help, under "manage your schedule", there is a small example showing several days screenshot (see months) with assorted background colors. I can't find any way to add these colors to my own view of the calendar. Is this possible?

  I'm running the Mavericks, version 7 of schedule.

  Hi Jack,

  Thanks for your question.  The different colors you see represent different calendars (home, work, etc.).  The resources below provides more information on the use of the calendar in Mavericks application.  I've highlighted the key here information.  Click on the link for more details.

  The basics of the Mac: calendar keeps your appointments

  

  To change the color or the name of a calendar, select it in the calendars list, and then choose the command Edition > read the information.

  To the right of the name of the calendar, you will see a color box, click the current color to display more options.

  See you soon!

• Secondary display does not connect

  Hello world

  I have trouble getting a secondary display to work. The installer worked well on an older Mac Pro until we passed out.

  Now, we use a Mac Pro mid-2012, that uses a DVI output for main monitor. The secondary display is sent from a thunderbolt port to a mini-affichage of a transmitter HDMI to HDMI, then drills down to a level via ethernet to a receiver, which converts it to HDMI for a TV.

  Whenever I connect the mini display of converter for love at first sight, the computer behaves as if she's trying to connect flashing market, switching back and forth between 1 and 2 screens. It just keeps going black, showing black desktop, two desktop computers, never until that I disconnect the converter mini display.

  Anyone have any ideas why? The Setup program has worked well on the previous computer, a 2006 Mac Pro, using DVI to HDMI instead of the mini HDMI display. I also tried to use the DVI on the new port and the same result.

  Thank you!

  The Mac requires the display to meet an initial query with its name and capabilities.

  No answer = no image.

  HDMI is for TVs, then your box of stunt may not have implemented the secondary channel required to connect to the computer and ability to react on it.

• ElliteBook 8740w: 8740w ElliteBook do not charge the battery or start. The battery icon flashing orange color

  Hello, all of a sudden my 8740w ElliteBook will not charge the battery and the battery flashes of color to orange color. Well, I have even if the battery is dead (it is already 5 years old) so I bought new. Well, the laptop will not charge too much new battery. When he consumed all the battery power the situation is the same as with the old. When I disconnect battery dock and plug AC the same problem is vithnessed... baterry icon flashes orange. AP power seems good however it provides compatible 19, 94V. What's wrong? Thanks, Ales

  Hello @AlesR ,

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.

  Even if it is a Commercial product, here is a link to to test the battery.

  Plug the power supply directly to a wall outlet works. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

  Thank you.

• Application is not displayed in the builtin display disconnect after secondary display

  I've linked my PC with a secondary screen with a station in the office. I took my PC from the docking station. Now, when I try to open a say for example VPN software, the page is open but I don't see the page on my integrated display. I tried Windows + P option, it does not work. How viiew the page in my view integrated?

  I found the solution...

  1 Windows + P => select extended.

  2. Select the window that does not appear in the display of builtin.

  3. press Windows + shift + right arrow or left arrow depends on the management of the secondary display.

• Flash Player color step problem

  Hi all!

  Recently I ran into a very strange problem, which involes Flash Player (standalone) on my computer. I'll try to summarize the question, so you can easily get the image

  1. I started noticing the issue when I type 'Ctrl + Enter' to test a Flash movie and my color step (defined as 0x000000) appeared suddenly... completely white. Please note that he had been black all the time, just all of a sudden in white wihout do me anything!

  2. I'm sure my ActionScript has nothing to do with the color of the scene-> there must be no accidental errors caused by runtime scripts.

  3. my operating system: Windows 7, 32-bit with an average of system specification. In fact it worked Flash Professional CS5 for a long time with no problems at all

  4. my standalone Flash Player (FlashPlayer.exe): 10.3.183.7 (I think it's the latest version at time of writing)

  5. feeling curious about the case, I tried to open my Flash Professional CS4 (I install both CS4 and CS5 on my machine), create a new blank document, set the stage color to something other than white-> test with "Ctrl + Enter"-> that the result is that new white background! (at this time there I started to 'omg' in my mind...)

  6. I tried to Open a bit. SWF files on my machine that were created a long time ago. All with the same white background. I am sure that in the past, these files have background colors other than white.

  7. publishing of the Flash file in a HTML wrapper and displaying the HTML file-> scene color is displayed normally

  8. publication of the Flash file into an EXE file and opening this file EXE-> scene color is displayed normally

  9 Hitting 'Ctrl + Enter' twice (i.e. test the movie to 'Simulate download')-> scene color normally appears when the file is finished loading

  10. I tried to clear the settings from Flash Professional user preferences (following the guide, Adobe), uninstall and reinstall my Flash Player (using the Adobe uninstaller program) but all in vain. The only thing left that I have not done is remove, and then reinstall Flash CS5, which takes a long time and I'm not happy to...

  .. I guess that's the entire image so far. Anyone having the same problem / found a way to solve this problem?

  Thank you very much for your time and help,

  Best regards

  Khang

  Hello

  I got exactly the same problem today and I solve it by deleting the files in my 'mm.cfg '.

  I hope it will work for you too...

  Nico

• After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.

  After the upgrade to Firefox 6.0.2 first flash content was not displayed, but now the plugin does not load. Firefox plugin check says Flash is obsolete, but I just downloaded it from the Web site.
  Mac OS X 10.7.1
  Firefox 6.0.2
  Flash 10.3.183.7

  The current versions of Firefox are 64-bit on OS X, if you need a 64-bit version of Flash with Firefox 6.0.x or you must start Firefox as a 32-bit application to be able to use a 32-bit version of a plugin.

  1. Closing of Firefox
  2. Launch the Finder and open the Applications folder
  3. Make a right click or Ctrl-click the icon of Firefox.app
  4. Select "Get Info."
  5. Select or deselect the option "open in 32-bit mode".
  6. Close window "Firefox Info"
  7. Restart Firefox

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• Changed resolution of the secondary display: cannot reset

  I use a second monitor on my Imac 27 "OS 10.11.3 and have never had a problem with the resolution on the second monitor connected with a VGA cable. Suddenly this morning on this screen resolution is 800 x 600. I can scale, move in 1280 x 1024, have held down the Option key to detect the resolution of more options (the monitor displays the suggested resolution is 1980 x 1080, but I can't find how to add this resolution who worked until today. Puzzled and frustrated.

  Hi we04ndy,

  I understand that you have a problem with the resolution of the screen. Let "see if we can get this sorted out.

  I don't know, after the second article, if you use an Apple Mini DisplayPort to VGA, you will get a 1920 x 1200 max resolution or 1600 x 1200 depending on the discount rate. I would look on the troubleshooting in the first article to review what to do if you get undesirable results with the resolution of your secondary display. I would start with the SMC reset and NVRAM for you get started.

  Get help with graphical problems on external displays connected to your Mac.
  https://support.Apple.com/en-us/HT201177

  Apple Mini DisplayPort adapters: frequently asked questions (FAQ)
  https://support.Apple.com/en-us/HT204149

  Nice day

• I managed to remove the icon to display all open windows one behind the other.

  I managed to remove the icon to display all open windows one behind the other.  Where can I find it now?

  Also, my laptop keeps getting an error when I try to restore to an earlier date and told me that it is impossible to complete.

  Hello

  Which, in my view, that you have a problem with, it's called windows Flip 3D!

  Try this first and see how you go...

  1. To turn on the Quick Launch bar, follow these steps:
  2. Right-click anywhere on an empty spot on the taskbar.
  3. Choose toolbars from the menu that appears.
  4. Select Quick Launch in the following menu so that it is checked.

  You should then be able to click the icon to switch between Windows now and use the 3d Flip...

  Or

  . Right click on the Quick Launch toolbar, but not on an icon
  2. Select the folder from the context menu. It will take you to the Quick Launch folder that should live:

  C:\Users\username\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

  3. right click in an empty area of this folder
  4. Select new, then shortcut from the context menu
  5. for the location text box, enter the following text:

  C:\Windows\System32\rundll32.exe dwmapi #105

  6. click on the next button
  7. appoint. (Flip3D, for example)
  8. click on finish

  The shortcut will now be in your Quick Launch toolbar.

  Concerning

  GT4U

• Adobe color, by clicking color theme displays the wrong color (PSD, I, iD, AE)

  When I create a new Adobe Color CC Web site color theme, sometimes the color theme seems to have a mind of your own. This has happened for the last few months in the I, ID, PSD and AE (CC 2015) I've just updated all the software to the latest version (Release 2015 3.0)

  I downloaded a link did not enter to my problem on my Vimeo here: Failure of the adobe color picker

  I create the color theme, then when I choose the color in After Effects, Photoshop, Illustrator, or InDesign, although the colors look correct and hovering on the color theme displays the appropriate 6 numbers and colours CMYK, color once I have create a form, or select a brush, color is incorrect.

  If I play with the theme long enough by changing a few values here and there, it seems to work. But for at least this color theme, I can't have the correct color without manually typing in color, although color Adobe theme library displays the value of the appropriate color.

  Anyone having problems with the color themes and color pick up?

  Thank you

  Chris

  If you don't want your color to change, use only RGB color Adobe cc. Do not click the CMYK option.

• Cannot disable the secondary display in library mode window

  I don't have two monitors. My video card shows only one view. While in library mode, I want to see the selected image in the film strip in the main window of the library. This used to work, but now I see only the selected image in the window «Lightroom - secondary display» I can't use LR in this way. How can I close the secondary monitor window entirely (not only close with F11)?

  Just Shoot Me, I tried the small icons 1 and 2 in the lower left corner, but no matter which I clicked on, the preview of the image came in the secondary window, not in the main preview area of LR.

  F. McLion, I'm sorry that you did not understand my description. The problem has been fixed by Adobe, so I guess it's okay now.

• 4K content DNxHR flashing bright colors

  Hello

  I created Quicktime 4444 DNxHR files in Adobe Media Encoder. They play back fine in Quicktime Player, in first Pro and Media Encoder 2K files play very well, but video 4 k is replaced by the flashing bright colors.

  Tim

  

  Yes, I use Cineform now. I will also send a bug report to Adobe.