Application is not displayed in the builtin display disconnect after secondary display

Similar Questions

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.

• APPLICATION will not appear on the main menu of the Simulator... Help, please

  Hello everyone,

  I came across this example code and tried to run on the Simulator 9900 and for some reason, the Simulator does not pick up the code. ..

  as the application does not appear on the main menu screen options... so I can not fire at all.

  someone knows why... ID really appriciate the help

  (Note: the simple code opens a new window when clicking on a button)

  Kind regards

  gezzy

  package mypackage;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class FirstScreen extends MainScreen implements FieldChangeListener {
      ButtonField theButton;
  
      public FirstScreen() {
          add(new LabelField("First Screen"));
  
          theButton = new ButtonField("New Screen", ButtonField.CONSUME_CLICK);
  
          theButton.setChangeListener(this);
  
          add(theButton);
      }
  
      public void fieldChanged(Field field, int context) {
  
          if (field == theButton) {
          UiApplication.getUiApplication().pushScreen(new SecondScreen());
          }
  
      }
  
      public class SecondScreen extends MainScreen {
  
          public SecondScreen() {
              add(new LabelField("Second Screen"));
          }
      }
  }
  

  I think you are saying that the application icon will not be displayed on the Simulator? If so, this can help (I had the same problem and what I did):

  1 assuming you are using Eclipse, just run the program (it will be forfeit and display an icon to load for a few seconds on the Simulator).

  2. then go to file-> load BlackBerry Application or theme on the Simulator.

  3 navigate to your compiled COD of the file, then open it.

  4 after a loading icon, the application should appear in the menu.

  If this does not work, try to close the Simulator and do step 1.

  I hope this will help!

• My application is not updated in the app store. Brand is not move stop I try

  Please, I want to update my application do not move all the app s

  What have you tried? for example

  -logging out and back to your account on the phone,

  -disconnect and reconnect to your network

  -close the App Store application via the task bar of the phone,

  -soft-reset/reboot the phone

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• This application could not start because the configuration - side by side - is incorrect

  After the upgrade to Windows7 x 64 professional, I am now get, "this application could not start because the configuration - side by side - is incorrect ' nero drive. I tried to reinstall the program and uninstall Microsoft Virtual C++ packages + without any result.

  Any help would be appreciated.

  Hi ChickC  

   

  Welcome to Microsoft Windows 7 answers Forum!

  a. use the System File Checker (SFC.exe) tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:

  sfc/scannow

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ·         Infoermation more on SFC scan found in this document:

  http://support.Microsoft.com/kb/929833

  b. perform a disk check:

  Use the following steps:

  1. Open computer by clicking the Start button, click computer.
  2. Click the drive you want to check, and then click Properties.
  3. Click on the Tools tab and then, under error-checking, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  1. Click Start.

  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  The .NET framework update

  Download and install the most recent of the .NET Framework

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  If the error still persists please provide us with the error log:

  Type eventvwr.msc/s in the address bar.

   The list of all the events that are listed as 'Error' in the main window when you go to 'Newspapers Windows' and 'Application '. There is often a large number of them. Send us any ones you see listed for the last few days. (Please also do it for the log files in 'System'). When you do, provide us the name of the 'Source' and all that is listed in the description below the list of newspapers box when you click on one.

  It will be useful.

  Thank you, and in what concerns:

  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK

• This application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more.

  Hi all

  I recently installed a mod for S.T.A.L.K.E.R SoC V1.004. The game won't start not even, instead, it gives me the following message:

  This application is not compatible with the operating system installed.
  Please upgrade to Windows 98SE, Windows 2000 or more.

  I'm under Win 8 64 bit. I have uninstalled and rebooted twice (both game and mod) does not.

  I have to downgrade to XP to be able to play this awesome mod, he ran on this platform with the same configuration before, why he now rejects it know not only the people at Ms.

  Please help if possible

  Thank you very much

  Pierre Viljoen

  Probably, all in all probably is a 16-bit program, and as such does not work on Windows 8.0/8.1 64 bit. In addition, the game seems to have 20 years or more. You can try running in compatibility mode, but I think that the game is dead. Hope this helps and if you need help please post and we will be happy to help you.

  The above opinion is mine and casually and does not necessarily reflect that of Microsoft, they are employees. or any other Member of this forum.

  "When we try to take anything by itself, we find it hitched to everything else in the universe"-John Muir

• My DPS application does not appear in the Iphone App store?

  Hello

  Until very recently, I only ever designed for the ipad, but recently, I made sure that all my folios have made multiple accessible on iphones etc.

  However, I realize that my (Professional edition) published application is not available in the iphone App store and I do not understand why not? It is available on ipad.

  Help, please!

  Thanks a lot and best regards,

  Have you changed the application in the App Builder to be an iPhone and iPad app? Chances are that your existing application was built as a single app for iPad. You must update in the App Builder and then resubmitting to Apple. I think that for it to actually build a new application, as the setting for iPad only cannot be changed via a tool for editing to an existing application.

  Neil

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Creative Cloud applications do not appear in the creative cloud download window

  Creative Cloud applications do not appear in the creative cloud download window

  The Creative cloud only window the list programs that the system is able to run.  If some are missing, this may mean that the system does not meet the minimum requirements to run the applications.

• Superior 1/4 screen does not respond to the mouse - cannot disconnect sites when Logout button is in this area, IE. Facebook, banks, etc.. This does not happen with IE. I reinstalled Firefox without result.

  Menu bar, tabs, history, research, etc. work fine, but in this area, I am unable to access anything whatsoever. For example, on the Firefox help screen the area on the right side of the screen that shows my user id - Sign Out - Inbox - and other applications will not respond to the mouse. Therefore, I will be unable to sign using Firefox. This is true for every Web site I have access. Fortunately, at least one of the banks that I use has an additional journal on area at the base of the screen that can be used.

  Recently, the extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• ADF application do not display correctly with the IP address of the url and url localhost.

  Hi all.
  
  I have a strange problem. When I get my adf application deployed on a server of autonomous local weblogic with the ip:
  
  http://localhost:7001 / Application/faces/index
  
  It makes it very well. But when I load it with the url:
  
  http://10.5.14.15:7001 / Application/faces/index (private ip), it doesn´t make it fine. Tables the same haven´t style and some items appear selected as if I select them with the mouse.
  
  This problem occurs only with internet explorer, not with Chrome.
  
  Also, when I see a table within a region to a jspx, the with the header columns is not rendered causing the width of the line header correctly, not being the same as the other lines.
  
  This problem happens also with internet explorer.
  
  Any help please?
  
  Internet Explorer 8. JDeveloper 11g.2. WebLogic 10.3.5.0
  
  Also happens with Internet Explorer.
  
  Maybe coding? DOCTYPE?
  
  Thank you

  What you can do is to talk to the people who manage the proxy to find out why it does not all files, or just disable the proxy so that intellectual property

• Calendar application does not display events

  I just upgraded my computer laptop (asus n55s) windows 8! I added different calendars on my microsoft account, but nothing appears at all in the App (they however can be seen when I opened outlook account in a browser). Is there something wrong with the app?

  Thank you!

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you have problems with Windows 8 calendar application.
   
  Method 1:
  Run the troubleshooter app and check.
  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab
   
  Method 2:
  Check the updates to the App store (s)
  To update the application, you can press or click on the notification, or follow these steps.
  a. on the start screen, tap or click on Store to open the Windows store.
  b. type in the right edge of the screen, and then tap Settings.
  (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click settings.)
  c. tap or click App updates. If you have not connected to the Windows store, sign in using your Microsoft account.
  d. press or click Find updates.
  e. If updates are available, sliding down on or right click on the app updates you want, and then press or click on install.
   
  Method 3:
  You can try the steps from the link and check if you are able to view events in the calendar app
  windows.microsoft.com/en-US/windows-8/mail-calendar-app#1TC=t1
  Reference link:
  http://Windows.Microsoft.com/en-us/Windows-8/calendar-FAQ
  Reference link
  You can consult the calendar of Windows 8 from the link functions and check.
  http://blogs.msdn.com/b/B8/archive/2012/06/15/designing-the-Windows-8-calendar-app.aspx
  Just reply with the results. I'd be happy to help you more

• Smartphones from blackBerry Torch 9810 - new applications do not appear in the tab all

  I've recently upgraded to a Torch 9810 with OS7 on it. Started installing apps (done a clean install of Apps instead of installing from a backup or anything like that), but when I went to run the application, I could not find in the tab all.  But when I go into Options > device > application management, it shows the program installed. So I tried to install other apps and the same thing happened.

  So I took a picture of something and went in the Media tab to see photos. And here there are all the Apps that I have installed in the Media tab. Then tried to move them to the all tab and he'd let me, only allowed me to move the application to a different location on the media tab, and not to another tab.

  So first, how can I get the Apps install in the right folder? Secondly, how can I move the Apps that I have installed it in a different tab?

  Thank you.

  From your home screen, press the BB menu key.  In the menu, you will see two things you might be interested in setting... Manage the panels and Options.

  Manage panels to configure how many panels you want to use.  I chose only the Panel all, so everything gets displayed here.

  In the Options, this is where you tell your device where you want to store Applications downloaded in the "download folder".