Management of access to the PSO

Similar Questions

• Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Hi Peggy Gore,.

  Welcome to Windows Vista answers Forums!

  Access Manager is a tool to control the types of content that your computer can access on the Internet. After Content Advisor activated, we can consider only rated content that meets or exceeds your criteria. You can adjust the settings according to your preferences.

  If you have set a password and you have forgotten your password, you may need to contact Microsoft Customer service to reset the password.

  For more information, please see the following links to Access Manager:

  Internet Explorer Content Advisor: Frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Content-Advisor-frequently-asked-questions

  Using Content Advisor to block inappropriate web content.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Content-Advisor-to-help-block-inappropriate-Web-content

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IOM: Manager request access to the subordinate

  I have a requirement that managers should be able to request access to resources for their subordinates. OOTB, users can only free resources request and admin can provide resources to others. I can think of a way
  
  All managers is part of a group of IOM.
  Give the necessary menu group and permissions to "grant" resource.
  
  I hope that the details of resource objects can be filled by the same manager in this case, because it must be mapped to process details. I don't know how I'm going to add all managers to one group well IOM and with change management, this does not sound like a great way to go about it. In addition, Manager must be "ideally" able to request access to only his subordinates, what will not happen to the approach described above.
  
  Is there a way to do this? Please let me know
  
  Thank you.

  Here are three slightly different approaches which require too much customization -
  1. instead of create a new jsp just modify the jsp (tjspRequestVerificationTiles.jsp I think) "not allowing users to submit the application for other users. Therefore, write a few lines of code to check that the user is infact the Manager. In this approach, managers will be able to see all the users can choose their but will finally be rejected to create a request.
  2. create an approval workflow where if someone else (other than User Manager) has requested approval will go to the User Manager. In this approach eventhough other managers are able to ask of other subordinates, but the resource will not be put into service without the approval of actual carriers.
  3. create an approval workflow where if someone else (other then User Manager) asked, while the application is dismissed. So even if an unauthorized user has asked for one, but this request will not go anywhere. You can also send a notification to the user you attempted an unauthorized application.

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• Access to the Task Manager is not possible

  Cannot be accessed by ctrl-alt-del Task Manager or by richt click on the task bar. "Start Task Manager" does not appear in the first case and is grey in the second case. The two Vista and McAfee updated daily. Using Vista SP2.

  E-mail address is removed from the privacy *.

  Hey MikePressman,

  The virus infestation rarely disables the Task Manager. Check if the DisableTaskMgr key exists in the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  a. go to start and type regedit.exe.

  b. navigate to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System

  c. on the right side, find a REG_DWORD value called DisableTaskMgr.

  d. If the key exists, you can delete the key or double-click on it and set its value to 0 to enable the taskbar.

  e. close Regedit.exe

  f. restart the computer.

  Task Manager should be back now.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• How to Access Manager for devices in the Windows 7 Ultimate Computer of the Microsoft Management Console (mmc) or Windows XP Professional computer using the computer (compmgmt.msc) management?

  I want to access Device Manager on a Windows 7 Ultimate remote computer from a computer running Windows XP Professional.  Whenever I have use (compmgmt.msc) computer management and access the remote computer, I connect successfully to it.  But when I select the Device Manager it says: 'access denied '.  I checked the security policy (secpol.msc) and I chose the deny access to this computer from the network and there no users and groups listed but it says that its default value is invited.  Can you tell me the step by step procedure?

  Thank you.

  In addition to changes to the GP, you must also do the following.

  Open services.msc, locate the "Remote registry" service, start the service and set to start automatically.

• Manage access to the credentials named via EMCLI

  Hello dear colleagues,

  does anyone know how to manage access to the powers named via EMCLI or did someone knows if this function exists in EMCLI.

  We want to configure access through scripting, so that for example we can grant access to all administrators of database for all named credentials.

  I would be very happy if someone has a solution.

  Thanks in advance!

  Best regards

  Sönke

  Yes, you emcli Word for it - http://docs.oracle.com/cd/E24628_01/em.121/e17786/cli_verb_ref.htm#CHEBIEED

  in the emcli even guide, you can search credentials and find the relevant verb

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.

• How to access all the lines one by one, a table ADF via managed bean

  Hi Experts,
  
  Hi I'm new in the ADF.
  
  Could someone help me to fix the case below?
  
  Scenario - I have a table called Test_T1 that have 4 columns C1, C2, C3, C4. Creation of EO, VO and AM for test_t1.
  When created in pages ADF, I selected the option "automatically exposed components UI in new managed bean" (mynewmanagedbean.java).
  Control data drag and drop Test_T1 table in the page as a table of the ADF.
  Set the properties is read-only C1, C2, C3 and C4 is an input text.
  Add after the table and attathed button action on the mynewmanagedbean.java bean managed.
  At the time of the Test_T1 page filled with a few No.. lines (such as 9).
  How can I access all the lines above through the key without selection of these.
  In fact, I want to print all the rows of the table in the log at the time to press the button.
  
  Thanks in advance.

  Sorry for the delay, the code was copied from another test case. You can work directly with the line...
  I created a new test case based on the departments of the HR schema table:

  import oracle.adf.model.BindingContext;
  import oracle.adf.model.bean.DCDataRow;
  import oracle.adf.model.binding.DCBindingContainer;
  import oracle.adf.model.binding.DCIteratorBinding;
  import oracle.adf.share.logging.ADFLogger;
  
  import oracle.jbo.Row;
  
  public class DumpRows
  {
      private static ADFLogger _logger = ADFLogger.createADFLogger(DumpRows.class);
      public DumpRows()
      {
      }
  
      public String cb3_action()
      {
          DCBindingContainer bindings =
          (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          DCIteratorBinding dcIteratorBindings =
          bindings.findIteratorBinding("DepartmentsView1Iterator");
  
          // Get all the rows of a iterator
          Row[] rows = dcIteratorBindings.getAllRowsInRange();
          for (Row row : rows) {
              String depname = (String)row.getAttribute("DepartmentName");
              _logger.info(depname);
          }
          return null;
      }
  }
  

  As you do not have the class of line interface build you must get the attributes in their names. Be careful here, because any misspelling is cought only when you run the application.

  Timo

• manage all folios and access all the Analytics

  Hello and happy new year

  We have an urgent question about dps:

  We create an adobe id different for each application we build.

  by downloading folios associated with a certain app to the folio Builder we need to connect with this specific adobe ID?

  or can we use 1 adobe ID to manage all folios for all applications.

  which is the best way to go, in the long term to manage all folios and access all the Analytics.

  Please let us know as soon as possible.

  Ediz

  one account per app. Yes, you have to identify you with this Adobe ID to create content for this App. unless you intend to create application kiosk (one that shows all folios of all content), this is the right approach.

• Access to the managed connection in bean container

  Hello
  
  I was following the situation in the workflow: viewOne-> method invocation (from managed bean)-> viewTwo. Anyway, I need to call the method of a bean managed between pages. It works and method is executed, but in this method, I do have access to the link container. Using

  BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry()

  BindingContainer is null. How can I solve this problem?
  
  Kuba

  OK, it was simple after all.
  Your method call in the empDeptTf workflow does not have a pafe definition file and has therefore no ties. In your bean method when you try to get the DCBindingContainer is null.
  Solution:
  in the empDetTf, select the method call 'callBeanMethod' activity, right-click on it and select 'Create the Page definition' in the context menu. This will create the page for the method call definition file. It is always empty, add what you need here. To make the testContainerMethod() in the work of bean you can for example click the Green + signer sign on 'routes', select 'action', (not open), click on the RootAMDataControl and select 'validation' or 'rollback' in the choice of a select "Operation".
  This will create a binding operation to the operation you choose. Now your application will run, and you get a DCBindingContainer in your bean.

  On the other hand I do not understand your use case. So everything that might not be necessary. If you give more information we may be able to point in the right direction.

  Timo

• After you import the metadata from an another env, no access to the Control Center Manager

  Hello
  I work with bise1, in this setup there are main ETL OWB features only;
  I imported metadata via design-> import metadata; These metadata were exported in a different environment;
  Once imported, all seem fine, I can make changes, the center of access control manager
  then I save and exit design center; When I connect back, I have more access to the Control Center Manager, the command is dimmed.
  I re-imported 5 times already, so I only got access to the Control Center Manager, why what is happening?
  anyone ever had something similar, or perhaps you could have the indication on what is the problem?
  Thanks in advance for any advice
  Rgds

  Hello

  may be trivial, but you opened the project in the Project Explorer tree. Before that, you cannot open the Control Center Manager because it is related to a project.

  Kind regards
  Carsten.

• Need to deny access to the file for the User Manager

  Hello

  I need be able to deny access to the file manager, as I don't want my client, deleting files. However, for some reason, I have to allow him access to what he should be able to download files via InContext Editor (he needs to link the pages to documents that are not on the server so he needs to download and do it, I have to grant access to the file manager).  How can I get around this?  I don't want to reupload the site whenever it deletes a file...

  Unfortunately we can not do - file manager access to removal as well as download and at this stage that cannot be changed.