Management of memory for complex structures

Similar Questions

• BlackBerry smartphones is a manager of memory for 8310?

  I'm suddenly having the battery draining 50 percent from one day to the next and would like to see what actually works and also to be able to kill an application or service that could be the cause of the problem. Is there an app for that, or a method internal to do?

  In addition, GPS does not use so much power? I updated last night and I was wondering if that could cause this problem with the battery.

  Read this link here, the part on the verification of applications running in the background. .

  http://www.BlackBerryFAQ.com/index.php/Maximum_Battery_Life

  eduardo_b wrote:

  In addition, GPS does not use so much power? I updated last night and I was wondering if that could cause this problem with the battery.

  No, GPS se uses quite a lot of power. BUT the problem is that most applications of mapping (BBMaps, Google Maps, etc..) Do not use a lot of battery. I bet that you have left an open in the background mapping application.

• How can I disable Auto Grow for all structures in memory?

  I inherited a ton of code LabVIEW with Auto Grow enabled for all structures (loops For, case of Structures, etc.). There are thousands of these structures.

  How programming (or other) turn off Auto Grow for all structures in memory?

  I met the same problem. I prefer not to use auto-grow, but naturally, it is in most of the code I inherit. In any case, this VI should solve the problem. I found it on these forums earlier.

• Where should I place a SWC file that describes a complex structure for a web service?

  Hello!
  
  I am creating a web service in ColdFusion 9, which returns a complex structure or has a complex argument.  I'm placing the .cfc file that describes the structure in the same directory as the .cfc which uses the structure.  Right now just trying to get a wsdl.
  
  I have currently two functions in my .cfc, first returns a string.  The other ideally returns an array of strings.  Saying returntype = "String()" gives an error that ColdFusion could analyze no chain
  
  So I tried to make a type defined by the individual item being a string:
  
  < cfproperty >
  < cfcomponent name = "Info source" type = "string" >
  < cfproperty >
  
  ------------------------------------
  Is my code that uses this cfc:
  
  < cfproperty >
  < cffunction name = "getzips" returntype = "remote access" = "string" >
  < cfset #resultsCommaDelimtedZips # = "this is the result" >
  < cfreturn CommaDelimitedZips >
  < / cffunction >
  
  < cffunction name = "getInfoSources" access returntype = "at distance" = "InfoSources []" >
  < / cffunction >
  < / cfproperty >
  
  The error I get is:
  
  AXIS error
  
  Sorry, something seems to have gone wrong... Here are the details:
  
  Error - error trying to create the skeleton of Java for web service CFC. ; nested exception is:
  coldfusion.xml.rpc.CFCInvocationException: [coldfusion.compiler.ParseException: invalid CFML construct found on line 3 in column 1.] ColdFusion was looking at the following: < p > & lt; < /p > < p > the CFML compiler treated: < ul > & lt; marks the beginning of a ColdFusion tag. Did you mean LT or LTE? < /ul >]
  
  AxisFault
  faultCode: {http://schemas.xmlsoap.org/soap/envelope/} Server.generalException
  faultSubcode:
  faultString: error trying to create the skeleton of Java for web service CFC. ; nested exception is:
  coldfusion.xml.rpc.CFCInvocationException: [coldfusion.compiler.ParseException: invalid CFML construct found on line 3 in column 1.] ColdFusion was looking at the following: < p > & lt; < /p > < p > the CFML compiler treated: < ul > & lt; marks the beginning of a ColdFusion tag. Did you mean LT or LTE? < /ul >]
  faultActor:
  faultNode:
  faultDetail:
  {http://xml.apache.org/axis/} hostname:ntc15
  
  ----------------------------
  I have a similar problem if I use cfcomponent:
  
  < cfproperty >
  < cfcomponent name = "approved" type = "string" >
  < cfcomponent name = "total_charged" type = "string" >
  < cfcomponent name = "charge_error" type = "string" >
  < cfcomponent name = "renewed_until" type = "string" >
  < cfcomponent name = "reason" type = "string" >
  < cfproperty >
  
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/help.HTML?content=webservices_20.html said
  Note: If the files of the components are not in a directory under the web root, you must create a server web mapping to the directory that contains them. You cannot use ColdFusion mappings to access web services.
  
  So I tried putting the .cfc file in a directory under my folder wwwroot rather than inside.  That did not help.
  
  Any suggestions?  I feel that I did exactly what all the documents I can find tells me to do!
  
  Thank you!
  
  -Mabel :-)
  

  We work collaboratively with another company that makes the front-end server, by using the web service, so I need the wsdl show the kind of real data, not just "any", that is using what is 'array'.

  If I use your code (add a name for the echoStatus argument), I get

  How can I tell it a table of _strings_ specifically?

  ColdFusion is loosely typed, so I wonder if we can be so specific in the type of data, without resorting to Java for example. But then again, you will meet soon all sorts of complications. A ColdFusion array and an array of java are 2 totally different things. Run the following code and you'll see why

  
  #testArray.getClass () .getName () #.

  in any case, because the strings are is a subset of the type 'all', your service includes also the case where an array of strings is returned.

• Question on the module memory for Satellite A60

  I have a Satellite A60-352, and I was wondering if I can put my module memory of my laptop on my desk. And another thing, where I find the module in my cell phone because I'm not.

  Thank you

  Hello

  The fact is that the A60 was equipped with an internal memory (256 MB or 512 MB).
  This memory is not removable and so you only have one memory for an upgrade slot.
  Usually the A60 manages the PC2100 200 pin SODIMM (266 MHz) DDR modules.
  So, you can use the modules from different manufacturers that support the above specifications.

  Good bye

• Extension of the memory for Satellite M70 207

  Hello

  I have the Satellite M70-207 with 512 MB of memory (DDR2 RAM) and I want to Add 1 GB of memory for this PC (total 1.5 GB).

  Can I add another memory (RAM) to this PC?
  and how?

  Thank you

  Hi guys

  I can confirm this info. You can certainly use a 1 GB module in a slot.
  The laptop is able to manage 2 GB max memory (2 x 1024 MB)

  As mentioned above the slit is placed at the bottom of the device and could be upgraded with modules like this memory: DDR2 400/533 1 GB (PA3411U-1M1G)

  Good bye

• Settings for virtual memory for Qosmio X 505-8104 X

  Hello group,
  What is the best setting of virtual memory for general use for a x 505-8104 x with the hybrid c drive?

  Hi steilacoom.

  Best option is if Windows manage size of pagefile for all readers. Windows automatically sets the best size of swap file and you don t have to do anything.

  So just check the option automatically manage paging file for all readers size and get you the best performance and don t have any problems with the pagefile.

• Error message: to restore enough memory for programs running, save the file and then close or restart all programs

  It said "restore enough memory for programs to operate correctly, save the file and then close or restart all open programs".

  I changed the size of paging and says always the same, I have 1.5 GB free RAM, but don't know how to find or what to do 'virtual memory '.  Have windows 7.

  I started the safemode and run also memory dignostics and nothing found, please help, cannot afford to take a shop or get a new computer, I'm using another pc.

  I was recommended to download and. Run 'hitmanpro3'... but if anyone has had this problem and solved it or know how, please help!

  Thank you

  Hello

  Please contact Microsoft Community.

  I understand that you receive an error related to the lack of virtual memory. This error message appears when running any program that requires more memory your computer has, or running in the background, Windows manages the system memory by saving the data between physical memory and virtual memory. In order to help you better, please provide us with the following information:

  What is the brand and model of your computer?

  I suggest you follow the methods and check them off below if this solves the problem.

  Method 1: Clean boot

  A clean boot is a troubleshooting technique that allows you to get the computer facing up and running so that you can determine what elements of the normal starting procedure problems.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the clean boot, follow the section How do I reset the computer to start as usual after a clean boot troubleshooting under more information in the article to put your computer to normal startup.

  Method 2: Prevention of insufficient memory problems

  Follow the steps mentioned in the link and the check, it solves the problem. Follow the evolution of the size of the virtual memory section

  http://Windows.Microsoft.com/en-us/Windows/preventing-low-memory-problems#1TC=Windows-7

  Method 3: Virus Scan

  Microsoft Safety Scanner is a free burner that can be used to analyze a system for computer viruses and other forms of malware.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Additional information: Windows optimize for better performance

  Hope this information helps. Response with status so that we can help you.

• When my PC comes out of hibernation I get a message that "settings have been automatically changed to cause low-memory for operation Aero"

  * - Original title - Win7 settings

  This is related to other issues on Win7 Aero performance. I have a Core i5 processor 2310 2.9 GHz CPU and a videocard from ATI (AMD) Radeon HD 6570 (I don't know the exact specifications but minimum memory for this model is 512 MB). Well, this should be enough to use Aero. However, when my PC comes out of hibernation, I get a message that the settings have been automatically changed because of not enough memory for operation Aero. Why is it so?

  Hello

  1. have you made changes on the computer recently?

  2. is specific to hibernation question?

  3. What is the accurate and complete error message?

  Method 1.

  Open the Aero Troubleshooter: http://windows.microsoft.com/en-IN/windows7/open-the-aero-troubleshooter

  Guided Help: Troubleshooting Aero in Windows 7: http://support.microsoft.com/kb/976170

  Method 2.

  You can try to change the power settings and check if that helps.

  Power management: http://windows.microsoft.com/en-us/windows7/products/features/power-management

  Method 3.

  You can also update the display drivers and check.

  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-hk/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Refer.

  Sleep and extended: frequently asked questions: http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions

  I hope this helps.

• 4 GB memory for vCenter

  Hello

  I have a 2 cluster hosts with a vCenter Aplliance. By default, it take 8 GB memory for the device. I have 16 + 8 GB in total, then could I set it up with 4 GB of memory?

  Could I have any problem?

  Thank you and best regards.

  Depending on the size of your environment, you could get serious problems because the minimum supported memory size is 8 GB, see: vCenter Server Appliance hardware required

  And another possible problem, is that if you get the problem, VMware can refuse your vCenter management if they do not meet the minimum hardware requirements,

• VM CPU MAX CPU &amp; memory for a few vm in different vcenter

  Hi all

  I am a beginner inpowercli scripts, I try to get maximum CPU and the value of memory per day for 5 days, some how I managed to write a script in the way below but I don't get the desired result. Please help get the MAX & CPU AVG, the value of memory for the virtual machine that I mention in the input file.

  $vcenter = "VCS1', 'VCS2', 'VCS3.

  $usr = "_".

  $pwd = "_".

  Connect-VIServer-Server $vcenter - the username-password $pwd $usr

  $inputvm = get-Content - Path "C:\Input.txt".

  $vms = get - Vm $inputvm

  $start = (get-Date). AddDays(-5)

  $metrics = "cpu.usage.average", "mem.usage.average".

  $stats = get-Stat-entity $vms - start $start - Stat $metrics

  $stats | Group-object - property {$_.} Timestamp.Day}, {$_.} @entity.name} | %{

  $vmstat = "" | Select VmName, day, MemMax, MemAvg, CPUMax, CPUAvg

  $vmstat. VmName = $_. Values [1]

  $vmstat. Day = $_. Group [0]. Timestamp.Date

  $cpu = $_. Group | where {$_.} MetricId - eq "cpu.usage.average"} | Measure-object-property value - average - Maximum

  $mem = $_. Group | where {$_.} MetricId - eq "mem.usage.average"} | Measure-object-property value - average - Maximum

  $vmstat. CPUMax = [int] $cpu. Maximum

  $vmstat. CPUAvg = [int] $cpu. Average

  $vmstat. MemMax = [int] $mem. Maximum

  $vmstat. MemAvg = [int] $mem. Average

  $allvms += $vmstat

  }

  $allvms | Export-Csv "C:\Documents and Settings\user\Desktop\VMs.csv" - noTypeInformation

  -----------------------------------------------------------------------------------------------------------------------------------------------

  I get the result as below:

  Are you sure that there are no empty lines in the file?

  It is the only way that I can't reproduce your problem.

• Queries on techniques of management of memory in VMware

  Hello

  A query on techniques of management of memory in VMware:

  Suppose that my ESX 4.1 server runs on a host having 8 GB of RAM. Now I create five virtual machines with Windows 2003 guest OS and specify a reserve of memory of 1 GB. In this case, assume that I turn on all five VMs sequentially VM1 to VM5. Assume VM4 and VM5 are inactive (no activity inside the BONE invited) and VM1, VM2, VM3 run under maximum loads. In this case the VMKernel dynamically allocate the memory of VM4 VM5 of other three virtual machines running?

  I guess the real issue here is booking: 1 GB memory must be free on the host to start a virtual machine in this case. However if the guest OS is not heavily loaded would be the VMKernel still swap pages of memory to the VM slowed using memory management techniques ESX?

  Thanks, Vivek

  Suppose that my ESX 4.1 server runs on a host having 8 GB of RAM. Now I create five virtual machines with Windows 2003 guest OS and specify a reserve of memory of 1 GB. In this case, assume that I turn on all five VMs sequentially VM1 to VM5. Assume VM4 and VM5 are inactive (no activity inside the BONE invited) and VM1, VM2, VM3 run under maximum loads. In this case the VMKernel dynamically allocate the memory of VM4 VM5 of other three virtual machines running?

  Yes - is VM4 VM5 do not use the full reservation of memory 1 GB memory will be available to other virtual machines - once these virtual machines started memory bemanding memory will be recovered and given to those virtual machines

  I guess the real issue here is booking: 1 GB memory must be free on the host to start a virtual machine in this case. However if the guest OS is not heavily loaded would be the VMKernel still swap pages of memory to the VM slowed using memory management techniques ESX?

  Yes - even if the virtual machine is not under heavy load, but other VMS are it will swap memory for the by the VM vmkernel swap file

• What is reasonable memory for Firefox use?

  Title says it all-

  What is reasonable memory for Firefox use?

  The normal use, I am an average of 1.2 G or about memory (of 16 G total); is this normal? Don't not maxing out at all but I was wondering.

  How to define and measure the use of memory for Firefox? Activity monitor? I use Firefox to write this. In the activity monitor, I see Firefox to 347 MB and Firefox Web Content to 259 MB.

• How do you manage virtual interfaces for Macbbok

  How do you manage virtual faces for macbook pro?

  I guess that you are referring to the virtual faces on a network?

  System Preferences > network > gear icon > manage virtual faces

• Adjustable memory for NB550D resources

  So after upgrading the memory in my NB550D to a module of 4 GB (3 GB usable) steals the netbook, but I noticed the HD 6250 graphics uses 1 GB of memory for himself, obviously such a graphic of a budget entry has not even need half of this sum, especially that the screen is only 1024 x 600 , so if an admin is to check this, I wondered if in a future BIOS, an option could be added to adjust the amount of GPU memory?

  I'd rather have the GPU using approximately 256MB and rest in the direction of memory system, it does not require as much memory.

  Hey,.

  Who knows if Toshiba released a BIOS where you can adjust the graphics memory but such a function isn't known to me and I doubt it will happen.
  The memory of the graphics card will always be controlled automatically and there is no value that you can change.

  I mean that even 3 GB of RAM is really enough for performance netbook and I doubt you need more RAM and even some programs need more RAM you can use the virtual memory on the HARD drive.