Management of the character - a few questions

Similar Questions

• Management of the character

  We are experiencing some problems with the management of Persona in our environment. We have a server configuration file on a computer virtual running windows server 2008 r2 hosting sharing > Persona. In view, we have 2 pools of about 15 related clones where management Persona is installed locally to have the path go to \\server\persona\%username%

  Our problem is that all of our users wrote to sharing, but now only half are always back up. Y at - it a permission set that needs to be done on our server? the part?

  Any ideas?

  Thank you all

  -Brad

  on my installation, I did the following

  root folder (hidden)

  -permission to share (= FULL control authenticated users)

  -ntfs perissions (this folder only with checkboxes on ATT rail/run - list of file - reading - reading extend - and read permissions)

  root folder inside the folder

  -share any

  -ntfs permissions (the user has FULL control and owner (profile requires ownership))

  also on group policy I added to the Administrators group on the profile, so that they can also see the content when the profile is created.

  do not really never use permissions for everyone.

  Good day.

  Sam

• A few questions after the downgrade of Win 7 on Satellite U940 - 11L

  Hello

  friend of mine bought the Toshiba Satellite U940 - 11L which had Windows 8 on it, due to some reasons that she wanted to have Windows 7 installed on it, which was pretty easy.

  Trouble came with the installation of the Symantec touchpad, after installing the drivers, it worked for about 10-15 minutes but then it stopped working.

  Tried to uninstall and install again but no luck, found a few discussions where it was suggested to remove all the devices, remove the battery and the power cord.

  Press the power button for 15 seconds and then power back on but still not lucky (I wasn't in the restoration of the default settings of the Bios I did not any change it outside disabling secure boot and replacing UEFI CSM that was needed to run win 7 on it).

  Tried about 4 different sources when it comes to the drivers but still does not work. I checked the Device Manager Dev but see no conflict, and it shows that the unit works fine but the problem persists. Please note that the drivers were specific to windows 7.

  Please if you have any suggestions we would greatly appriciate it.

  On another note, I'm not able to install the bluetooth it (HW ID shows as ACPI\TOS6205), I tried to install it several times but no luck because it always shows as unknown device in the dev Manager. The driver that I use is Bluetooth Filter Driver Package as info.

  Also, the computer is slower than it was with Windows 8, I suspect the reason for this is the fact that the installation of win 7 I accidentally erased part of the hybrid drive SSD (the size was 11.2 GB if I remember correctly, yes silly me...). I wasn't looking for a while on the net to see if there is a way to fix it but no luck so far.

  Thank you very much for your time and your suggestions!

  Tony

  With regard to the question of the touchpad.
  To my knowledge, the touchpad should work even if the Synaptics touchpad driver has not been installed. Windows system contains own driver that control the touchpad and provide standard settings. Of course after installing the Synapatics driver, you should get a few more options and features more touchpad.

  I recommend you to download the driver for the touchpad from Synaptics driver page and install it again: http://www.synaptics.com/resources/drivers

  With regard to the problem of BT.
  The laptop supports WLan Intel (Intel Wireless-N 2230) card that supports BT connectivity. Bt driver filter pack is ONLY necessary if you laptop would use an Atheros WLan card or Realtek WLan card. For the Intel WLan modules such package of filter is NOT necessary. To get BT to work, you must install the battery Toshiba BT!

• A few Questions on the updating of 8.0 to 8.5.1

  Hi all

  I am updating to 8.0 8.5.1 and have a few questions:

  1. the drivers I installed in 8.0, I guess they must be installed again to 8.5.1 version correct? Simply install these drivers OR again since the 8.5.1 disc? Is there something I need to watch out for?

  2 8.0 are automatically deleted after installing 8.0 or I have to delete manually?

  3. after the update 8.5.1, wait not much difficulties in the management of the screw that I created in law 8.0?

  It'll be all for now... thank you all for your help!

  1. Yes. No problem

  2 no. I suggest that you not remove any, where you need. Just don't use it.

  3 n ° but you never know. So I advised to only keep version 8 too

• Hello Mr President! I have a few questions about the Word report generation please.1.How can I add a border to a page in word? 2. How can I add gridlines to a table generated related word?. Can 3. how I add a border to a picture of the Word report?. Thank

  Hello!

  Sir, I have a few questions about generating word reports using (C language in labwindows) please.

  1. How can I add a border to a page in word?

  2. How do I add border lines and grid to a table generated in Word report (not "cvi control table"inserted from gui, I wonder about the table generated in Word report)?

  3. How can I fill a table cell of report word with the data type other than 'character '.

  And sir a question on the use of the timer in labwindows cvi please.

  Sir, I'm trying to set a time minimum interval timer to 1millisecond (0.001 s), that I have set, timer cares about the interval set by me he only meets the minimum default time interval which is, I think as 10milliseconds (I'm using windows xp service Pack 3 version 2002).

  Concerning

  Imran

  Pakistan

  Have you read this statement ? It explains how to set the registry value:

  If the REG_SZ useDefaultTimer does not already exist, you must create it under HKEY_LOCAL_MACHINE\SOFTWARE\National Instruments\CVI Run-Time Engine\cvirte. "" This can be done navigate to the appropriate folder, and then click Edit "New" string value. Then, click on means the name of the new value created, select Rename, and then specify useDefaultTimer as the name. Finally, double click on the name and specify the value True or False.

• You are considering buying the Lenovo Yoga 13 - a few questions!

  Hi, guys, I really like the look of the Ultrabook of Yoga: Lenovo's 13, with the i7 processor. All I want to is Microsoft Office, browse the Internet, iTunes and play Football Manager.

  Few questions, the processor is i7-3537U. If this processor was on a laptop, it would be faster?

  My main concerns are to play Football Manager at a fast speed with say 8 leagues running, it would be OK on this ultrabook?

  Also, the 128 GB SSD is perhaps a little weak, I could buy more storage for this? Say I didn't buy any extra and took say 125/128 GB, it would affect performance at all? Bravo guys!

  It should be good for what you are doing.

  The i7-3537U is very fast, more than enough. I usually do virtualization on the 13 of Yoga, and it was just as fast as laptops to game my friends.

  It should be fast enough for Football Manager. I'd be surprised if she couldn't run it.

  The Yoga of 13 still has a free mSATA slot. You can always put an SSD rained in there. But it can be a little difficult to do. There is also a 256Go model available in case you haven't noticed!

• a few questions of the use of image previews

  Here are a few questions.

  1 Overview of the image created by "option of previews of 1:1, which is used in the module?

  2. If I create "1:1 previews and, 'Insights into Standard' is not created & used?

  3. If 'Standard previews' is generated and used, it will be used for any purpose?

  4. I know that Lightroom uses the Adobe RGB in the library module and the use of Melissa RGB in the develop module.

  then ' 1:1 previews are produced by two types?

  If it is not two kinds, color previews space is not specified, preview image is shown color space of image rendering applied in each module?

  Internal preview of Lightroom image handling is difficult for me.

  Previews are displayed in the library modules map, book, slideshow, print and Web with Adobe RGB

  Previews are shown to develop using Pro Photo RGB. 1:1 previews are used to zoom in with, for example in the development of control and sharpness.

  You can limit the size of the cache of previews, if you prefer.

  Reach:

  Edit > catalog settings > file manipulation

  You can choose to ignore the insights 1:1 for example, after 30 days, or never.

  In Ligtroom the working color spaces have been set by default. But you can choose a different color to export space. For example:

  sRGB for display on the web accessories or email

  AdobeRGB for some printers

  ProPhoto RGB for some equipment top of the range, but only with 16 bit images

  A specific profile for printing

  See this link for more information:

  https://helpx.Adobe.com/Lightroom/help/color-management.html

• A few questions for the experts

  I have observed the reason why I do not understand:

  1. What is the purpose of the Main () function ?
     • It is simply a wrapper around the original substance?
     • I guess that global definitions must always precede it.
  2. Examples of Adobe (for example SnpCreateDialog) use the form
     • SnpCreateDialog.prototype.run = function() {...}
     • rather than simply the function SnpCreateDialog () {...}
     • What is the logic behind this?
  3. I also found one that some Unicode characters are not allowed in the comments to a script of UTF - 8 encoded. In my long-running script (now > 1000 lines) I need a regular expression in the editor to find the culprit: [^ \p{L}\p{N}\p{P}\s\$\<\> = +------^]

  goRtfDoc.Close... / / must be postponed to preserve the ¶ - ID

  This creates the error

  Error message: character conversion error
  Script, line #: H:\Adobe\framemaker.12en\AdobeFrameMaker12\6, 0

  The ¶ symbol by substituting the word paragraph corrected the error.

  = > is there a list of "unallowed" characters or vice versa, a list of characters (also for string constants?).

  Hi Klaus,

  I'm not an expert, but I can answer a few questions, I think.

  I'm not sure that a main() function is very important in JavaScript, which analyzes and runs to a large extent of procedural way. It is important for the standalone executable program (exe), because when you run a program, the operating system environment or the runtime needs to know where to start. For example, an archive executable Java must have a main() function, because this is the norm for the JRE to know which function/method to run first when the program is launched. If you see it in JavaScript, it could just be there as a general convention question of programmers appreciate general conventions. -WARNING - I don't know for sure that's true.

  I think that global variables may appear anywhere outside the functions in JavaScript, even though I think it is certainly preferable to declare before all the functions that use.

  The prototype company is a technique to add a method to the underlying of the object type, such that all objects of this type can invoke it later. In your example, I suppose that if you do this...

  var kdaubesDialog = new SnpCreateDialog();

  Then, you could do this with your object:

  kdaubesDialog.run ();

  For more information, see JavaScript Prototypes.

  Regarding the problem of unicode, I think there may be some bugs in the application ARE. Also, I came across this problem when some character (or sequence of characters maybe) caused it just freeze. I forgot which character he was, but once I me am rid of him, things has worked. Maybe there's a standard JavaScript to do this, but I'm not aware of it.

  I hope this helps.

  Russ

• a few questions about the migration of content/web content

  Hi all
  
  
  I have a few questions about the migration of the website and content (from development to test) which are not specified after reading the oracle documentation.
  
  -> When we make the site replication will be migrated content (data files).
  
  -> when we move will contained all the ED and RD etc (any object type web site migrated).
  
  --> are the two the necessary step for migration when we migrate web site.
  
  
  Thank you
  
  -Yves

  --> When we make the site replication of the content will be migrated (data files).

  It depends on how you do it. The tool 'Site Studio Replicator' won't move any content, only the structure of the site. The 'Manage replication Site' page can be used to migrate content with the structure of the site but I do not recommend for large sites, I use separate tasks to archive to move the content. "Backup and restore" page stores the entire site in a ZIP file, not advisable for large sites.

  --> When migrate us content will be all ED and RD etc (any object type web site migrated).

  Yes. It uses the metadata xWebsites field to identify the elements that belong to the site.

  --> are the two the necessary step for migration when we migrate web site.

  Depends on how you do it, but yes, all bits are needed.

• A few questions about the OSB 11 g

  Hello
  
  I'm quite new to OSB 11 g and I have a few questions.
  1. If a SOA Composite transaction has been canceled, how would translate into OSB. Would there be that new attempts?
  2. for a composite using a proxy service, it is a must to use a direct connection to OSB reference? Composite SOA simply can't consider a service proxy a generic web service?
  3. where are the debugging information written to? You can control what is written in the debug file? You can specify filters, the severity level? You can specify what environment variables?
  4. does one OSB on WLS and is therefore not connectable not hot on other app servers?
  5. you can attach WS-Policy to my WSDL web services, create and enforce on WLS everything without using GOSA. If possible, then what is the role of GOSA?
  
  I'd appreciate any help to these queries.
  
  Concerning
  Priya.

  1. If a SOA Composite transaction has been canceled, how would translate into OSB. Would there be that new attempts?

  If you call a Proxy a SOA Composite OSB and the transaction is completed and restored from SOA Composite then also completes transaction OSB and an error will be recorded on the side of the OSB. To try again, I'm not sure, but there should be an option in the composite on SOA to try again.

  -----
  2. for a composite using a proxy service, it is a must to use a direct connection to OSB reference? Composite SOA simply can't consider a service proxy a generic web service?

  Composite SOA Suite can directly call a WSDL based Proxy Service as a generic web service. I believe it should also be possible to invoke an XML/HTTP (any XML Proxy Service) of composite SOA Suite. Although the direct connection is the preferred option for performance and security reasons.

  -----
  3. where are the debugging information written to? You can control what is written in the debug file? You can specify filters, the severity level? You can specify what environment variables?

  Debug information is written in the newspapers WLS default files. You can access any information you want (variable or custom data context) of a message flow of Service of Proxy using log action. You can control the severity of the log in Action log.
  You can define what level of newspapers is actually written in the log file and set custom bearings in the WLS Console filters (Home > servers > {server name} > Logging > advanced).
  If you want to turn on logging to debug the server-specific (for example if you want to save the details of the default transaction), you can do so by enabling debug logging necessary to (Home > servers > {server name} > Debug)

  -----
  4. does one OSB on WLS and is therefore not connectable not hot on other app servers?

  Yes OSB is approved for WLS.

  -----
  5. you can attach WS-Policy to my WSDL web services, create and enforce on WLS everything without using GOSA. If possible, then what is the role of GOSA?

  More big difference is scope. You can pretty much fix political WS to OSB services, but their scope will not OSB. GOSA can do at the level of the company across various applications. GOSA also provides security from end to end and monitoring SLA, easier update of policies within business etc. Read this white paper for more details on GOSA:
  http://www.Oracle.com/technetwork/middleware/WebServices-Manager/OWSM-11g-tech-WP-134065.PDF

• Re: a few questions about the recovery of product on my laptop Satellite L450D-113

  Hey there, fellow buyers of Toshiba.

  I have a few questions on prod. recovery on my laptop.

  * Is _First, safe? _ *
  Because my sister it on his Vista laptop (a Toshiba) and finished with a BSOD and a trip to the PC world for a replacement HARD drive.
  -----
  * _First, he will restore C: and D:, or just C:? _ *
  Inadvertently, I deleted the D: partition on my hard drive and he would like to return.
  -----
  * _Third, I am formatting due to incompatibility with some applications, namely 32 bit ones._*
  I can somehow incompatible lance 32-bit on my 64-bit?
  -----
  * _Finally, it erase Ubuntu as well? _ *
  I have Ubuntu (10.04 LTS incase you're wondering) and want to keep the data that it is intact.

  -----

  YES, I backed UP MY DATA (here, that goes with the words "I have no sti - oh, wait, what's that noise clicking / grinding?")? I just do not feel comfortable with the formatting yet until I know answers to these questions, but there again, I have only 200 MB left of C: (go, 250 GB in 8 months?) and need the return performance (GHIII and GTA: San Andreas used at 40 fps, but now play them is wading through treacle (LAG)!) Please respond quickly, and I look forward to answers!
  -----
  Toby

  Hello

  > First of all, is it safe?

  recovery process is completely safe.

  > Second, he will restore C: and D:, or just C:?

  He will restore the os with the settings on drive C;. Local d it will create image file from hard drive which I know.

  > Can I run 32-bit incompatible somehow on my 64-bit?

  It depends on the application. I mean, do a right-click on the application and choose properties where you can Compatible mode.

  > Finally, it clears so Ubuntu?

  If it is installed on local d: I guess that will erase. To be honest, is not sure

• A few questions on the Satellite U920t-100

  Hello

  I bought the Toshiba Satellite U920t-100. for this tablet, I have a few questions. simple install windows 8 Professional on the current installation?
  what driver, software installed and other toshiba? are the problems with it?
  There is something about a pro installation win8?

  What of the screen when I run the u920t with an external monitor?

  I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  is it a good idea for it?

  Best regards

  All these questions different so let's start with first.

  > simple I can install windows 8 Professional on the current installation?

  Read this FAQ from Toshiba document. It provides all the answers and a detailed instruction.
  [How to change Windows 8 for Windows 8 Pro | http://aps2.toshiba-tro.de/kb0/HTD2B03F20002R01.htm]

  > what driver, software installed and other toshiba?
  Windows 8 uses the same drivers as Pro

  > What about the view when I run the u920t with an external monitor?
  What do you mean exactly? You can use internal display, external display or both at the same time

  > I want to buy the Toshiba PA3927E - 1PRP Dynadock U3
  > which is a good idea for that?

  Why not. Dynadock U3 supports own GPU so you can use 3 monitors at the same time

• A few questions before you buy the Toshiba Qosmio G40 - 12J

  Hello

  I would buy a Toshiba Qosmio G40 - 12J and I have a few questions:

  -There's a Bios / disk HARD Tatoo that block the other installation of the system?
  -Is an original supplied Vista DVD Installation or reinstallation is made with a hidden partition on the hard drive?
  -If a Master Installation of the Vista DVD is provided, is an additional driver / software cd also delivered?
  -I can delete partitions and recreate them as I want, or is there a problem (because of a Bios / HARD tato or hidden partition HDD disk)?

  Thanks for your answers,

  Good day!

  lightchpa

  My dear, I had a G40-108 and now I work very well with G45-AV690.
  You can install XP... Linux and so forth, but don't forget to find the right driver (Nvidia and so on...)
  The recovery DVD is not only the Vista operating system, but there is the operating system with all software and tool too.
  You can create and delete any partition you want to

• A few questions about the Satellite A100 PSAANE

  Hi friends,

  I have a Toshiba Satellite A 100 - PSAANE with Vista Home Basic preinstalled in it.
  Now, I have a few questions... I mention below: -.

  (1) if I want to format my laptop, I need a CD to install for Vista Home basic... then I don't have this Toshiba CD when I bought the laptop. So how do? question: How can I format it?

  (2) can I change my Vista Home Basic to windows XP? I think it's much faster than this one. is it advisable?

  (3) I have a GB of RAM in the laptop. Increase the RAM? I think that my laptop has become to slow down. is it advisable?

  (4) and on my screen, everytime I try to change my profile screen to windows Classic view, my screen begins to blink. and after a while, the screen turns off. So I can't change that. I put the color scheme of windows vista only. What to do about that?

  Please help me friends. Thanks in advance.

  Kind regards
  Perkins

  Hello

  Here, a few questions about the number:

  (1) usually, you should get the Vista Toshiba Recovery DVD. If you didn t receive this DVD then you can order it here https://backupmedia.toshiba.eu/landing.aspx or you could install the disc of Microsoft Vista.

  (2) of course, you can do this. I think that Win XP drivers can be downloaded from the Toshiba driver page.

  (3) Yes, you can upgrade the RAM. For more information, see your manual or search on this forum for similar topics

  (4) maybe it s associated with the graphics driver. Check if you can update. I would recommend additional check if you are using the latest version of the BIOS

  Welcome them

• Re: A few questions about the Satellite L300 - 145 (PSLB0E)

  Hello

  I have a few questions that make me go nuts.

  1 - this laptop what chipset is actually uses? GL960 and GM965? Since it has 2 GB max ram I would say GL960, but that one is capped at 533 mhz and 667 mhz are the Rams came with the laptop. Also the name of drivers chipset gm965, said, I don't know if it's the name for the entire group of chipsets or if it's really a GM965. And also GL960 has no integrated graphics, but this laptop only, and GM965 has an integrated graphics card.
  to prove that I do things to the top you go here:
  [https://ark.intel.com/products/29830 | https://ark.intel.com/products/29830] GL960
  [https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller | https://ark.intel.com/products/29821/Intel-82GM965-Graphics-and-Memory-Controller] GM965

  2 - if it's a GM965 why the computer only suports laptop 2 GB ram max, while officially the suports 4 GB chipset?

  3 - Why is there not a page on the website of toshiba (al less in the Web site code) which tells me the full specifications for this laptop, as if there is a page for others more recommended laptops?

  Post edited by: Kailido

  Your phone has Mobile Intel GL960 Express Chipset inside and can handle with 2 GB of RAM only and you can use the monitoring modules:
  1 GB-DDR2-667-PA3512U-1M1G
  2 GB DDR2-667-PA3513U-1M2G

  Unfortunately I can't answer your last question. This question is for Toshiba directly.