marked VM as a model
Hello!
What to do now? I was finishing my model in gold, when I accidentally marked a virtual machine as a model.
How to I "uncheck". It was a kind of critical server as well.
Thanks in advance for any help and assistance.
ShoAss
Just go home ===> Vm and models ===> and right click on the virtual machine and convert it back into a virtual machine
Tags: VMware
Similar Questions
-
How can I remove the landmarks of a file previously marked according to a model template?
I think I made this vaugely, so allow me to develop. I have a template for a website I made, and the model I created another template for a subsection of the site. Now, whenever I try to change the model of paragraph, to change all the subsections, the main model and her children do not work...
It is a difficult situation and I need the Web site running Tuesday. Help, please.
Thanks in advance
Nested templates. Yuck. Remove the 2nd template of your templates folder.
Open your original template (DWT file). Save as a new file (for example Template2.dwt) name.
Change the model as needed. Save again.
You have now 2 independent models, you can use to spawn new pages.
http://www.smartwebby.com/web_site_design/dreamweaver_template.asp
Nancy O.
ALT-Web Design & Publishing
Web | Graphics | Print | Media specialists
http://ALT-Web.com/
http://Twitter.com/ALTWEB
http://ALT-Web.blogspot.com -
F9H60UA #ABA: what "product range" and the model are my hp laptop?
Hello
Sell my HP like new on eBay, I tragically lack the original box or any documentation. I don't know how to fill out some fields on the eBay site:
1 range. As far as I know it's a HP 15 laptop. Is - this accurate enough? How could I know if it is a Pavilion, VAIO, Presario, etc.. ? There is no external marks.
2 model. Stumped on this one completely. He will have to leave the field blank unless you have a way for me to look it up.
3 Edition operating system. I know I have Windows 8.1. How will I know if it is Home Premium, professional or other?
4. type of graphics processing. I know that I have an AMD E-Series processor. This would be dedicated, integrated / edge or hybrid?
Thanks for any help you might be. If there is no way you can provide answers from the information I have provided, I just leave the fields blank and the wing.
See you soon,.
Bruce
Hello
Please use the following specifications:
http://support.HP.com/us-en/document/c04051951
It's a plain 15 HP, no other line. Its model name: HP 15-g019wm. It comes with 8.1 Windows 64-bit (standard version).
It is a low-end, inexpensive machine.
Concerning
-
API call for the deployment of computer virtual model?
Hi all
Could someone tell me how to deploy a virtual model computer using vsphere sdk webservice with the names of methods?
Thanks in advance
You use the method CloneVM_Task() (http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.VirtualMachine.html#clone)
You're going to treat it just like the deployment of a model non - VM, the only difference is that the model has a property that marks it as a model if you can not make any changes or it turn, but essentially a virtual computer model is identical to a virtual machine. Simply locate your model VM mor and pass while in the clone, spec and deploy as you normally would.
-
can I update my lapyop graphics card?
My laptop can't run most of the high-end even games at medium settings so I was wondering if I could solve this problem by opting for a better graphics card.
Hello:
Notebooks have the video solution that is soldered to the motherboard. It is not a card as you can install it in an office.
You are in the upper part of the mark for your laptop model. I don't see even a motherboard with better graphics than what you already have.
Needless to say, it would cost hundreds of dollars for a new motherboard (if it with better graphics), thus making it economically unwise to upgrade from a point of view cost vs. benefits.
Better to sell or Exchange your and get one with the video solution you're looking for.
Paul
-
Strange! SanDisk Cruzer blade 16 GB
Hello.
I buy a sandisk cruzer blade 16 GB a week ago. He had worked flawlessly for 2 days, but recently, I copied files of windows 7 64 bit and connect this player to a computer with windows xp. It shows usb not detected and has malfunctioned and blah blah.
I thought that there is a problem in this system, but I was shocked to see that now it is is even not detected by my pc either.
After so many tests, I tried to connect it with my keyboard usb port and it has been detected, but that the port is not 2.0 because windows ask me to connect it to a hi-speed 2.0 port. I thought that the problem has been resolved and I format the USB and then plug it back to my pc. but same problem again and it shows device attached has malfunctioned. but when I connect with the usb port on the keyboard it works very well. However, the usb keyboard that I tied this USB is connected with my usb port on the computer.
Similarly, I connect this usb with some old marks of Dell systems model Gx optiplex 260 and it has been detected it too much and at the same time not detected by any other pc that stood out...
Why is this usb detected now only by the usb ports on my keyboard and not by my pc as it was earlier detected by my pc.
I tried several solution but nothing works even with kaspersky scanner last definition.
Is there a solution to this problem. I want to connect this usb to my pc 2.0 ports.
I have intel DH55TC Board with Intel I3 processor of first generation.
First of all thank you.
In fact, the usb is defective and I had replaced.
and Ed if it is the question of power, then how can it be connected to the usb port on my keyboard that eventually connected to the same usb port of the usb to my pc and alternated readers like Kingston and Sony are working well in this port.
Any ways thanks to you guys for the suggestion.
-
Windows Vista: Error 42127 {archive CAB is corrupted.}
Recently, whenever I run Avast aswboot, I get the following article in the search results: file C:\Users\\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\KAUA3EK2\IE8-WindowsVista-x86-ENU[1].exe|>iesetup.exe error 42127 {archive CAB is corrupted.} I tried to access the file affected so that I can remove it. I'm using the advanced search with the option "View hidden files", but all I get is the search statement Avast - not the file itself. I think that I have to sign as an administrator, but how do I do this? What else could be necessary to remove this file? Thanks for any help!
Hello
1. you made any hardware or software changes the computer recently?
2. What is the mark of a computer model?
Step 1.
You must be logged on as administrator to do these steps.
Step 2.
I would suggest allowing you to run a Microsoft security scan to confirm that the computer is virus-free or remaining viruses are deleted.
Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Security Scanner warning: there will be data loss through an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.
In addition, I would like to inform you that if the file is infected, then the analysis should disinfect or remove it entirely.
Step 3.
Start the computer in safe mode, and then delete the file if you are unable to delete it in normal mode.
Start your computer in safe mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode
I hope this helps.
-
What is the best for your laptop: shutdown, standby, or hibernation?
Original title: 'stop'?
What is better for a laptop computer, stop every time, for sleep or Hibernate. It hurt to stop all the time. Thank you Windows Vista
Hello
Better to refer to the manufacturer of your system Support, their books online and their
Forums about your model (with a grain of salt), because it will be the difference between the marks
and even some models.Usually there is no exact answer but its best not to put the laptop off the coast and back
in a field so it can be avoided. Shut down the computer using also therefore be able to short
periods (several hours) using sleep or Hibernate would better save energy. Also allowing
Cool and heat Electronices frequently is not the best for their long term use and
life expectancy.Using power properly Plans with the right parameters of standby and Hibernate, which
depends on how you use the computer, get the best performance and service life
There is however no exact answer. Those who seem to be best for the way you use the
system will probably also be better in the long term. If you "could" set with the magical settings
that could optimize the functions of machinery and life, but then to use the machine in another
model, as we all wish, then in fact you will get actually less usage and life
If your usage patterns.One thing that many people forget, is that turn off the screen can also save power when you
you are away a few moments and wouldn't turn the computer off. This will save
some food through the use of a screen saver, but can be difficult to remember and does not record
A lot.Check with your manufacturer for system and their forums as your laptop might already have this
capacity.How to manually turn off notebook or laptop LCD - utility screen free
http://www.Raymond.CC/blog/archives/2008/07/20/how-to-manually-turn-off-notebook-or-laptop-LCD-screen/Turn off your notebook LCD with one click - author's website
http://www.RedmondPie.com/turn-off-your-notebook-LCD-with-one-click/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Windows 7 and HP LaserJet 4 Plus
I have a new laptop with windows 7 and a printer LaserJet 4 Plus old (but very reliable). I managed to download drivers from the HP site, but it still won't print. I get no error messages, just nothing happens when I try to print a document or test page. I have to change something in my settings?
There are three areas major problems installing a Laserjet 4 in Windows 7:
- Ports. The Laserjet 4 and its derivatives have a standard parallel port, but most of the Windows 7 machines no longer have a parallel port. The most common solution is a USB-parallel conversion cable. This can be problematic, because many of the converter cables do not support Windows 7. [Edit - here marked positions have the models of cable converter in the forum users has reported as working in Windows 7]. In addition, most cables have no documentation (or even a brand name) makes it difficult to solve problems. The converter can provide a parallel port simulated as LPT3: or it may be a port USB001.: Another option with the Laserjet 4 would be adding a JetDirect card that would provide a network for the Laserjet 4 port. This will require the Laserjet connected to a router and would provide access network on multiple computers if you wish. A typical JetDirect card for the Laserjet 4 is shown here.
- Drivers. The Laserjet 4 drivers (and 4 M and other derivatives) are sent through Windows Update. If Windows Update is enabled (as described in the method of step 2 here in the section "configure Windows Update for"...) you may be able to simply plug in the USB cable and install the driver correctly. If not do the following: click on start Orb, devices and printers, add printer, and then select the appropriate port. When the list of printers, click Windows Update. It will take several minutes for the list to repopulate, when it is finished the Laserjet 4 series printer won't be available under HP (Hewlett-Packard).
-
Missing Captain obvious - Site to site IPSEC, any ISAKMP security association
So I try to set up a site to IPsec and I fell at the first hurdle. I checked my config so many times and I can't see a problem.
Two routers can ping each other so connectivity is there.
Two routers have static routes to the router's local ip range against pointing out the wan interface.
Both routers have ACL (155) to the direction of movement of the other router and is associcated with the cryptomap.
Two routers have the map on the external interface.
However, any attempt to put in place a SA. Debugging on both shows nothing, show isakmp crypto that his shows nothing.
Please help us save my sanity!
Router 1
Current configuration : 4652 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption !! boot-start-marker boot-end-marker ! logging message-counter syslog no logging buffered! aaa new-model ! aaa authentication login TERMINAL-LINES local ! aaa session-id common ! dot11 syslog ip source-route ! ! ip cef ip dhcp excluded-address 192.168.30.1 192.168.30.100 ip dhcp excluded-address 192.168.31.1 192.168.31.100 ip dhcp excluded-address 192.168.32.1 192.168.32.100 ! ip dhcp pool DynamicPool network 192.168.30.0 255.255.255.0 dns-server 192.168.30.1 8.8.8.8 208.67.222.222 default-router 192.168.30.1 lease 0 0 15 ! ip dhcp pool Tony-PC host 192.168.30.10 255.255.255.0 client-identifier 0100.1e8c.6d85.3e lease infinite ! ip dhcp pool VisitorPool network 192.168.31.0 255.255.255.0 dns-server 8.8.8.8 8.8.4.4 208.67.222.222 default-router 192.168.31.1 lease 0 0 15 ! ip dhcp pool GuestPool network 192.168.32.0 255.255.255.0 dns-server 8.8.8.8 8.8.4.4 208.67.222.222 default-router 192.168.32.1 lease 0 0 15 ! ! ip host switch 192.168.30.5 ip host router 192.168.30.1 ip host unifi 212.250.84.221 ip host tony-pc 192.168.30.10 ip name-server 8.8.8.8 ip name-server 8.8.4.4 ip name-server 208.67.222.222 ip name-server 208.67.220.220 no ipv6 cef ! multilink bundle-name authenticated ! voice-card 0 ! crypto isakmp policy 1 authentication pre-share crypto isakmp key H8sh8Js7dn2jJ address *ROUTER2-IP* ! crypto ipsec transform-set C33-MH-SET esp-aes esp-sha-hmac ! crypto map C33-MH-MAP 1 ipsec-isakmp set peer *ROUTER2-IP* set transform-set C33-MH-SET match address 155 ! ip ssh port 8083 rotary 1 ! interface GigabitEthernet0/0 ip address *ROUTER1-IP* 255.255.255.248 ip nat outside ip virtual-reassembly duplex auto speed auto crypto map C33-MH-MAP ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto no mop enabled ! interface GigabitEthernet1/0 ip address 192.168.30.1 255.255.255.0 ip access-group native in ip nat inside ip virtual-reassembly ! interface GigabitEthernet1/0.1 encapsulation dot1Q 40 ip address 192.168.31.1 255.255.255.0 ip access-group visitor in ip nat inside ip virtual-reassembly ! interface GigabitEthernet1/0.2 encapsulation dot1Q 50 ip address 192.168.32.1 255.255.255.0 ip access-group guest in ip nat inside ip virtual-reassembly ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 217.137.232.209 ip route 192.168.20.0 255.255.255.0 GigabitEthernet0/0 no ip http server no ip http secure-server ! ip dns server ip nat inside source list 100 interface GigabitEthernet0/0 overload ip nat inside source static tcp 192.168.30.10 3389 interface GigabitEthernet0/0 3389 ip nat inside source static udp 192.168.30.10 3389 interface GigabitEthernet0/0 3389 ! ip access-list extended guest deny ip 192.168.32.0 0.0.0.255 192.168.30.0 0.0.0.255 deny ip 192.168.32.0 0.0.0.255 192.168.31.0 0.0.0.255 permit ip any any ip access-list extended management permit ip 192.168.30.0 0.0.0.255 any permit ip 192.168.20.0 0.0.0.255 any permit ip 212.250.84.0 0.0.0.255 any permit ip 194.62.232.0 0.0.0.255 any ip access-list extended native deny ip 192.168.30.0 0.0.0.255 192.168.31.0 0.0.0.255 deny ip 192.168.30.0 0.0.0.255 192.168.32.0 0.0.0.255 permit ip any any ip access-list extended visitor deny ip 192.168.31.0 0.0.0.255 192.168.30.0 0.0.0.255 deny ip 192.168.31.0 0.0.0.255 192.168.32.0 0.0.0.255 permit ip any any ! access-list 100 permit ip 192.168.0.0 0.0.255.255 any access-list 100 deny ip any 192.168.0.0 0.0.255.255 access-list 155 permit ip 192.168.30.0 0.0.0.255 192.168.20.0 0.0.0.255 dialer-list 1 protocol ip permit ! control-plane ! ccm-manager fax protocol cisco ! mgcp fax t38 ecm ! line con 0 line aux 0 line 66 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh line vty 0 4 access-class management in login authentication TERMINAL-LINES transport input all line vty 5 10 access-class management in login authentication TERMINAL-LINES rotary 1 transport input all ! scheduler allocate 20000 1000 end
Router 2
Current configuration : 6059 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! boot-start-marker boot-end-marker ! aaa new-model ! aaa session-id common ! no ip cef ip dhcp use vrf connected no ip dhcp conflict logging ip dhcp excluded-address 192.168.20.1 192.168.20.100 ! ip dhcp pool DynamicPool network 192.168.20.0 255.255.255.0 dns-server 192.168.20.1 8.8.8.8 208.67.222.222 default-router 192.168.20.1 lease 0 0 15 ! ip dhcp pool HTPC host 192.168.20.10 255.255.255.0 client-identifier 011c.6f65.43fb.ca lease infinite ! ip dhcp pool Wifi1 host 192.168.20.20 255.255.255.0 client-identifier 0104.18d6.8656.d6 lease infinite ! ip dhcp pool Wifi2 host 192.168.20.21 255.255.255.0 client-identifier 0104.18d6.6e44.00 lease infinite ! ip dhcp pool Wifi3 host 192.168.20.22 255.255.255.0 client-identifier 0144.d9e7.7471.00 lease infinite ! ip dhcp pool LivingRoomCC host 192.168.20.30 255.255.255.0 client-identifier 016c.adf8.9eed.44 ! ip dhcp pool MillHouseCC host 192.168.20.31 255.255.255.0 client-identifier 016c.adf8.ad31.50 ! ip dhcp pool Deskphone host 192.168.20.40 255.255.255.0 client-identifier 0170.8105.b355.b0 lease 5 ! ip dhcp pool DiningSureSignal host 192.168.20.41 255.255.255.0 client-identifier 01b0.46fc.5f25.24 lease 5 ! ip dhcp pool HallSureSignal host 192.168.20.42 255.255.255.0 client-identifier 01b0.46fc.575e.47 lease 5 ! ip dhcp pool HomeLaptop host 192.168.20.50 255.255.255.0 client-identifier 0100.16ea.80a6.7e lease 0 1 ! ip dhcp pool Z2 host 192.168.20.60 255.255.255.0 client-identifier 0130.a8db.8ae5.3f lease 0 1 ! ip dhcp pool iPhone5 host 192.168.20.61 255.255.255.0 client-identifier 01d0.a637.01b6.38 lease 0 1 ! ip dhcp pool Vera3 host 192.168.20.11 255.255.255.0 lease infinite ! ip dhcp pool VeraEdge host 192.168.20.12 255.255.255.0 client-identifier 0194.4a0c.0d82.3c lease infinite ! ip dhcp pool Wifi4 host 192.168.20.23 255.255.255.0 client-identifier 0144.d9e7.7458.8c lease infinite ! ip host htpc 192.168.20.10 ip name-server 8.8.8.8 ip name-server 8.8.4.4 ip name-server 208.67.222.222 ip name-server 208.67.220.220 ip auth-proxy max-nodata-conns 3 ip admission max-nodata-conns 3 ! ! voice-card 0 no dspfarm ! ip ssh time-out 60 ip ssh authentication-retries 2 ! crypto isakmp policy 1 authentication pre-share crypto isakmp key H8sh8Js7dn2jJ address *ROUTER1-IP* ! crypto ipsec transform-set C33-MH-SET esp-aes esp-sha-hmac ! crypto map C33-MH-MAP 1 ipsec-isakmp set peer *ROUTER1-IP* set transform-set C33-MH-SET match address 155 ! interface GigabitEthernet0/0 no ip address duplex auto speed auto pppoe enable group global pppoe-client dial-pool-number 1 no mop enabled ! interface GigabitEthernet0/1 no ip address ip nat inside ip virtual-reassembly shutdown duplex auto speed auto no mop enabled ! interface FastEthernet0/1/0 switchport trunk native vlan 10 ! interface FastEthernet0/1/1 ! interface FastEthernet0/1/2 ! interface FastEthernet0/1/3 ! interface Serial0/0/0 no ip address shutdown clock rate 2000000 ! interface GigabitEthernet1/0 ip address 192.168.20.1 255.255.255.0 ip nat inside ip virtual-reassembly ! interface GigabitEthernet1/0.21 encapsulation dot1Q 21 ip address 192.168.1.2 255.255.255.0 ! interface Vlan1 no ip address ! interface Dialer1 mtu 1480 ip address negotiated ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 ppp authentication chap pap callin ppp chap hostname 10518-DMIL-LN50QY ppp chap password 0 111MIL ppp pap sent-username 10518-DMIL-LN50QY password 0 111MIL crypto map C33-MH-MAP ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 Dialer1 10.20.0.1 ip route 8.8.0.0 255.255.255.0 10.20.0.1 5 name g-dns ip route 8.8.0.0 255.255.255.0 192.168.1.1 10 name g-dns ip route 8.8.4.0 255.255.255.0 192.168.1.1 name ML3G ip route 104.238.169.0 255.255.255.0 192.168.1.1 name uk-london.privateinternetaccess.com ip route 192.168.30.0 255.255.255.0 Dialer1 ! ip dns server ! no ip http server no ip http secure-server ip nat inside source list 100 interface Dialer1 overload ip nat inside source static tcp 192.168.20.27 80 interface Dialer1 90 ip nat inside source static tcp 192.168.20.10 8443 interface Dialer1 8443 ip nat inside source static tcp 192.168.20.10 80 interface Dialer1 80 ip nat inside source static tcp 192.168.20.10 8081 interface Dialer1 8081 ip nat inside source static tcp 192.168.20.10 8080 interface Dialer1 8080 ip nat inside source static tcp 192.168.20.10 8880 interface Dialer1 8880 ip nat inside source static tcp 192.168.20.10 8843 interface Dialer1 8843 ! ip access-list extended STOP_PING deny icmp any any permit ip any any ip access-list extended management permit ip 192.168.30.0 0.0.0.255 any permit ip 192.168.20.0 0.0.0.255 any permit ip 194.62.232.0 0.0.0.255 any ! access-list 100 permit ip 192.168.0.0 0.0.255.255 any access-list 100 deny ip any 192.168.0.0 0.0.255.255 access-list 155 permit ip 192.168.20.0 0.0.0.255 192.168.30.0 0.0.0.255 dialer-list 1 protocol ip permit ! control-plane ! mgcp behavior g729-variants static-pt ! line con 0 line aux 0 line 66 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh line vty 0 4 access-class management in transport input ssh ! scheduler allocate 20000 1000 ! end
Save your sanity, it's put a big :-) but--
You must change your NAT ACL IE. they should read-
Router 1-
"access-list 100 deny ip 192.168.30.0 0.0.0.255 192.168.20.0 0.0.0.255.
"access-list 100 permit ip 192.168.0.0 0.0.255.255 any."Router 2-
"access-list 100 deny ip 192.168.20.0 0.0.0.255 192.168.30.0 0.0.0.255.
"access-list 100 permit ip 192.168.0.0 0.0.255.255 any."Jon
-
He's a lead scoring against a website built in WordPress?
I have problems with lead scoring because of how Eloqua and County of WordPress tags of the page. Because any tag in WordPress is considered to be a page in Eloqua, I hit my limit of 500 tag very quickly. Suggestions for a workaround? page
Marilyn,
Is the site in question, cincom.com? I think this might be a question of translation of WP--> Eloqua. By this I mean that Wordpress tags are not necessarily direct equivalent of Eloqua labels. Tags of WordPress at the base are used for referencing, as part of the URL rewrite process and organization of the site. This might not exactly equate with Eloqua tags. What I fear is happening from your description, you're too weak of a pellet level and so you are run out of tags. Your rating model of lead as granular as your page is marking, with many smaller models score?
Most of the time when I worked with the rating, tags, and categories tend to be much wider WP tagging would be and used only to group as the content for rating rather than trying to match the granular level of markup for the page.
If you wish to discuss the details of your specific case, it would be preferable for you to send examples of what you have now and what you want from labelling in relation notation, even if it's only a small part to get you moving in a direction that would eliminate this problem.
-
Merges multiple data on one page
I created a post card that I need to be sent to customers. To save money, we put three postcards on 12 x one 18 sheet of paper. I'm putting three mergers of data on each sheet for the addresses of customers. Is this possible? I can provide a picture if necessary.
Hi ryaniscreative,
It is quite possible, as I often do for the variable data on labels Avery labels. However, our printer should be able to get this done for you automatically if you print this digitally. Our Canon printers have the ability position (front and back) 2 - up, 3 copies files, etc. I don't know that this is the case for most digital printers on the market. Ask your printer and they should do it automatically, in which case you build the file at full size and merge data as usual.
Never-the-less, here's how do it manually:
1. create your 12 "x 18" document in InDesign CC (2014).
2. drag your postcard art 12 "x 18" paper and create crop marks manually for this model of postcard art.
3. position the art of model of post card in the upper left corner of the document.
4. card all of your variables as usual in this art of model of a postcard on the two pages to your. CSV file.
5. in your data merge Paletteand in the Drop Down Menu in the upper right hand corner, select create a new Document merged.
6. in the section of documents for the Page of the Document , select multiple records and then at the bottom of the dialog box select Overview several cliché registration.
7. click on the multiple record layout tab.
8. adjust the margins and the spacing between the columns in the dialog boxes depending on your intention of positioning and design specifications.
9. press the OK button so that InDesign can start to create a merged document on all of your variables.* list *.
* If you just want to generate a PDF file then in step 5, instead of select Create a merged Document hit export to PDF.
NOTE: This is possible with a unilateral design. If you need to print graphics across the postcard (for purposes of dissemination of course), you will have to do this process again exactly the same way, in another document InDesign manually create pages between existing on the front pages and then paste in place, to another InDesign document.
-
problem with snapshots and provisioning
Hi, I'm having a few problems creating templates of virtual machines with snapshots. Virtual machines use a provisioning, but when I take a snapshot of the virtual disk is marked as thick (it seems to be a known bug http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1020137), although it actually uses a provisioning. So, when I clone the virtual machine and mark it as a model, this new model is configured as thickness of provisioning.
I was not able to force the new model to create as a provisioning via the Perl SDK. Does anyone know how I could force the model to use provisioning?
Thanks in advance.
Hello
In general, in order to convert the discs thick thin discs using the CloneVM_Task API, you need to set the VirtualMachineCloneSpec.location.transform as VirtualMachineRelocateTransformation.sparse. To perform the reverse operation, i.e. to convert a disc thin thick disk, set the property transform as VirtualMachineRelocateTransformation.flat
I hope that this could be useful for you!
-Angela-
-
Get an AIArtHandle for all the selected items in the doc
I'm doing what someone does in this other thread about the export in PNG.
reference: http://forums.Adobe.com/thread/320685
We have several layers (some off and locked).
I would like to pass all the selected items to the Action of Image Optimization as a group rather than optimize each. I use AIMatchingArt Suite to retrieve items selected, but it points to an array of AIArtHandles... any ideas?
That's how I ended up doing and it works. (In addition to the other code which has been referenced in the original post).
I don't know if it would work better with an ArtSet, but it works. Perhaps, if the images I'm flattening were somewhat more complicated, I would run in the duplication you mentioned.
result = sAIActionManager-> PlayActionEvent (kAISelectAllAction, kDialogOff, NULL);
result = sAIMatchingArt-> GetSelectedArt (store, & County);
If {(result)
Store = NULL;
Count = 0;
} else {}
result = sAILayer-> InsertLayer (NULL, kPlaceAboveAll, & newLayer);
If (newLayer &! result)
{
sAILayer-> SetLayerVisible (newLayer, true); See the layer
sAILayer-> SetLayerIsTemplate (newLayer, false); Mark as NOT a model layer get exported
sAILayer-> SetLayerEditable (newLayer, true);
result = sAIArt-> NewArt (kGroupArt, kPlaceAboveAll, Nile, &group);)
for (index = 0; (result == kNoErr) & (index< count="" );="" index++="" )="">
Art AIArtHandle = (* store) [index];
Copy of AIArtHandle;
Add the art group
result = sAIArt-> DuplicateArt (kPlaceInsideOnBottom, group, ©);)
}
}
}
-
My LS model will mark each lead/contact in our case?
I have created my lead scoring template and now want to start it. Our instance is shared among all of the business and as such, I want to just mark 'my' group of contacts. These contacts can be referenced in a group e-mail, shared filter or segment. I tried to create a program to add my members then pass them throught he head model rating but it doesn't seem to be an option to do so.
Am I right in thinking that as soon as I activate the model LS every single contact/lead in our instance will be marked? If so, I need to find away around it, otherwise I won't be able to use... That would happen if we had several models of rating all present at the same time? Will there be several fields of contact on each contact record to store this information?
My rating model is ready to go, and I really need to know how to start this and just score on my son. Any help would be greatly appreciated.
Thank you
Hannah
the main rating model will run on all contacts... so you decide which group to look for market or update CRM with... it's when lists and filters come in the picture... If you don't want the entire database to be registered, you can still create a lead scoring program using program generator...
Maybe you are looking for
-
AirPlay icon not showing or missing
Hello I use Macbook Pro 2016 OS X iPhong 6s iOS 9.3.4 and 10.11.6. I can't see the icon airplay on my devices. I have read a lot about this issue and tried to do but no change. Please advise me. Thank you. Nana
-
Toshiba Cameilio H10 - Question about recording format
Conversion of camcorder high definition help please! -------------------------------------------------------------------------------- I recently bought a Toshiba Camileo H10 what movies in HD 1080 x 720 camcorder. I did several video clips in this fo
-
Programmatically add a reminder of the sequence in a sequence file
How to add sequence recalls programmatically to a main sequence? For example, to configure, I get a table that tells me as the sequence files to run for each test instance. I want to call these files in sequence as a reminder of the sequence on the
-
computer will only start in safe mode, always samekh in normal mode
Original title: help computer will only start in safe mode, always samekh in normal mode.any ideas?
-
Elevation required to route add command When you try to add a network route with the "route add" command in the command line, I get the message "the requested operation requires a rise." What is the correct syntax to use?