Masks of brightness - cannot change the areas 'masked' by themselves

Similar Questions

• Level only 10 levels of brightness, cannot change the level of brightness at 5,15,25,35,45,55,65,75,85,95

  Hi, Im kenny, I have Windows 7 Enterprise 64-bit and my laptop is HP g4-1311AU pavvilion
  my system is as follows
  So, I have problem with my windows 7 not in windows 8. My brightness on WINDOWS 8, can change to 0,5,10,15,20,25,30,35,40,45,50,55,60,65,75,80,85,90,95 and 100
  But in windows 7, I can't change my brightness as windows 8, there are only 10 levels: 0,10,20,30,40,50,60,70,80,90,100
  in front of him, I have search on the net of people say that regedit is problem, go to: monitor HKEY LKM - System - Currentcontrolset - service - under settings and I need to create DWORD key and it works not
  other said the power management driver, Yes... before it, I install windows 7 Enterprise, there is windows 7 enterprise which is broken, so I re - install and brightness problems, well before I have reinstall windows, the brightness can 5,10,15,20, like windows 8 but when I re - install I had this problem, please help thank you..., if someone can answer in Indonesia please answer me with Indonesian langguage because I'm of the Indonesia Sorry for my bad English...

  Updated the BIOS with the graphics driver may do the trick.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the gamma/brightness/contrast

  I got gf260gtx
  Cannot change the gamma/brightness/contrast in Control Panel NVIDIA in the desktop computer games became almost white but nothing happens in games managed mode full screen (windowed mode is ok). In 190.15 new TINT option and that there is market! at a time in the office and games.

  ALSO windows STANDART color calibration OPTION - works in the same way! (really, you can only change gamma, bridhtnes and contrast - have NO sliders to change...)
  
  Hello
  I'm back with my problem...
  Really nothing works for me so I dicided to go back to xp.
  Now there is new version of win 7 7600 and I tried - still no change...
  I tried all the drivers + eysy = no result.

  "I think that person just to use this option so no one have the same problem))
  -everyone I asked - just say ' I didn't I'm able to change the brightness it y.

  I tried:
  181.71_geforce_win7_32bit_international_beta
  182.06_geforce_winvista_32bit_international_whql
  182.08_geforce_winvista_32bit_international_whql
  182.46_geforce_winvista_32bit_international_whql
  182.50_geforce_winvista_32bit_english_whql
  185.85_desktop_win7_32bit_international_whql
  186.08_desktop_win7_winvista_32bit_english_beta
  186.18_desktop_win7_winvista_32bit_english_whql
  190.38_desktop_win7_winvista_32bit_english_beta

  I noticed - if a game (almost all the real big games) have its own brightness settings it just ignore nvidia control panel/color calibration in this issue, but if it's a little game without this option, it works fine...

  Hello, raf73

  We appreciate that you help test Windows 7!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro

  You may also contact NVidia support.

  Thank you.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.

• Cannot change the font color on the desktop icons

  I am running windows vista. I can't change the font as in windows xp. No matter if the background is dark or the police is always black... Help!

  Hello

  Thanks for posting the question in Microsoft Answers.

  I apologise for the inconvenience.

  Unfortunately, you cannot change the font color of desktop.

  Because desktop wallpaper images have different colors, it is easy for the colors of unreadable fonts if they are on top of the same color in a background image to display. For example, a black font on top a dark part of the background image or a white font on a white part of a background image.

  The desktop icon fonts are dynamic and show white on dark background and change in white with a shadow effect black on a light background.

  In previous versions of Windows, it did not matter what color you chose to fund policies, some would still make invisible because of the background color of a desktop wallpaper. The user was constantly moving icons around the desktop computer to another colorful area where the police could be read. This was the source of a large number of complaints from users asking for a policy that was still visible, regardless of the color that was behind the police.

  However, you can change the theme and see if that helps:

  Change desktop theme:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-desktop-theme

  Hope this information helps. Let us know if you need additional assistance. We are happy to help you.

• Cannot change the Vista hosts file

  I started Notepad as administrator and open my hosts file, made my changes, but when I try to save it I get this message: cannot create the c:\windows\system32\drivers\etc\hosts file verify that the path and the name are correct

  How to save this file? Thanks for any help!

  Hello

  The host files are linked to the internet explore and this is why it must be very careful when you change them. And this is the reason why they were safe as to change. We have a FixIT tool to assign default host files. It's here.
  http://support.Microsoft.com/kb/972034 also, here is the article that explains how to change the host files and the Lmhosts file in Windows Vista and Windows 7. You cannot change the Hosts file or the Lmhosts file in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/923947

   

  I hope this information helps you!

• You cannot change the administrator account

  Original title: sdasdasdas

  I ca't change on my computer, my OS is windows 7 when I try to change administrator, it asks for a password when I put my password it say "" connection failed: the user did not request type of login on this computer "for this reason I'm stock on my user account and I can not install all the tools" because he has an administrator privileges. pls help me. ?

  Hello

  It seems that you cannot change the administrator.

  Perform the steps mentioned below and see if it helps.

  a: Click Start and type gpedit.msc in the Start Search area and press on Enter.

  b: Navigate to the following location
  Computer configuration / Windows Settings / Security Settings / Local political

  c: Under this click user rights assignment.

  d: Double-click access this computer from the network and verify that EVERYONE is added to the list.

  e: Otherwise add it by clicking Add a user or group , and then type EVERYONE, click OK and then apply and OK.

  Hope this information helps.

• You cannot change the time zone

  I lived in the Central time zone for more than 30 years, but my Windows 7 computer has turned to the Pacific time zone and does not allow me to change the Central time zone?

  OT: Windows 7

  Hi Robert,.

  Thanks for posting your question in the Microsoft Community.

  Of the question above, you are not able to change the time zone.

  What is the accurate and complete error you get when you try to change the time zone?

  Method 1: Setting the clock
  http://Windows.Microsoft.com/en-us/Windows7/set-the-clock

  See also, Synchronizing with a time server Internet, from the link mentioned above.

  Method 2: I suggest you try the steps from the following link:
  
  You cannot change the time and date if the time zone is set in Samoa (UTC + 13:00) and Ko 2657025 is installed in Windows 7 or in Windows Server 2008 R2
  http://support.Microsoft.com/kb/2660075

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Cannot change the verssion 10 vm

  Hello

  I've installed sql as database 2014 external vm on vcenter 2012 windows. (vm version is 10)

  now it is notwork is offline and I can't reconnect. (I use not cause of missing SQL web client and cannot change the vm version 10 or later through guest post)

  What can I do?

  Help me please...

  .. .i is unusable web client cause missing SQL and cannot change the vm version 10 or later through desktop client...

  It seems you are using a version of vSphere Client 5.5 pro update 2. Download the latest vSphere Client 5.5 VMware KB: download for VMware vSphere Client URL. It will always display a caveat about HW Version the virtual machine, but will allow you to modify most of the settings of virtual machines.

  Note: update the vSphere Client may raise an error, so please uninstall the current vSphere Client 5.5 and then install a new one.

  André

• Cannot change the type of data in the columns referenced by foreign keys

  Hello:
  
  I'm using Version 3.1.0.691 and change the types of data in many columns of data derived from the field types. If a column is referenced by a foreign key, however, the data type radio buttons are grayed out. I suppose that if I deleted the foreign key, that I would be able to change the data type of the column to a field, but that would be tedious. Is there another way to go about this?
  
  Any help would be greatly appreciated.
  
  Thank you
  
  Doc

  Hi Doc,

  If a column is referenced by a foreign key, however, the data type radio buttons are grayed out.

  It is not good - if you have the PK column, and it is called by another FK column you can change the data type of column PK and FK column data type will follow the change. You cannot manually change the data type of column FK. Good column PK itself could relate to another column, and in this case you cannot change the data type of column PK.
  In your case - you need to find the first PK/Uk column that is not the column FK itself and change its data type. FK columns in the chain will follow.

  Philippe

• The former "cannot change the power state of virtual machine: the process has exited with an error: end of the error message" thing again (Fedora 8/Server 1.08)

  OK, this problem beautifully undescriptive I've seen caused by what seems to be dozens of things happening for me.

  I made the mistake of horrible update my FC8 kernel to the latest one (2.6.26.8 - 57.fc8).  Mind you, that's all that's changed.  It was with a 1.06 server with happiness and perfectly good computers running virtual in use before the upgrade.

  After the new kernel and reboot, I had to rebuild vmmod.  I had to get a fix of any - any later that I used with my previous kernel (116 does not solve the problem of compiling) so I used all-any117d.  Update like a champion.

  Try to turn on a VM and Ihanta!, the above error.

  Nothing else was changed.

  I tried the upgrade to VMware Server 1.08.  Used all-new any117d - update OK.

  Error again.

  I have re-run the compilation, this time to say 'yes' to what the installation script to "adjust the permissions of all virtual machines in xxxlist" or whatnot.

  Error again.

  1. status of /etc/init.d/VMware

  Networking networking on/dev/vmnet0 is running

  Invited only on/dev/vmnet1 network is running

  Network invited only on/dev/vmnet8 is running

  NAT networking on/dev/vmnet8 is running

  Responsible vmmon module

  Loaded module Vmnet

  FWIW, I compile as long as root, but have always run VMware server from my UID nonroot.

  What now?

  I'm in the same boat.  Fedora 8 2.6.26.8 - 57.fc8 #1 SMP

  I have tried uninstalling/reinstalling v1.0.6 thru 1.0.8 with all 116 updates and 117d.   117D compiles with every version of server but when I try to turn on a virtual computer I get this error.

  Cannot change the power state of virtual machine: the process has exited with an error:

  vmxvmdb: name of the Index generated by the configuration file

  POST (no connection): Version mismatch with vmmon module: expected 138.0, obtained 168.0.

  You have a bad version of the module kernel "vmmon.

  Try reinstalling VMware Server.

  POST (no connection): failed to initialize the surveillance apparatus.

  Failed to initialize the virtual machine.

  End of the error message.

  I found several posts other people have this problem but

  they are months with no recent activity and nothing that solved the problem.  I found appeared

  to get a fix, one updated the all an update that corrects the problem for

  2.6.26 performing several nuclei, but the link for the update on TI-psycho appears to be dead.  Here is the link to the discussion

  http://Fedoraforum.org/Forum/showthread.php?t=199026&page=2

  Of course, I would like to know how to solve this problem as well.

  Thank you

• Cannot change the captions

  I have a form that was created by printing a worksheet excel to PDF, then we are changing in Livecycle ES - the form fields have been added.   However, we cannot change the captions for a group of radio buttons and options as insert text appear grayed out in the menu.   Is it just something weird about it because of how it was created?

  Sorry, I misunderstand the question.  When you import a PDF file (created from Word, Excel or any other application), you are presented with a dialog box that gives you two options... 'Create an interactive form with fixed pages' or 'create an interactive form with a fluid layout.  If you select the option 'fixed pages', a form is created where all the master key is represented as an image and cannot be changed, also, only form 'interactive' objects can be added to the form, such as fields, radio buttons, list boxes etc..  As you have noticed, the "non-interactive" objects like "static text", and "rectangles" are disabled.  In addition, the non-interactive properties such as captions (static text) are also disabled.  LC Designer is bahaving as expected, it is supposed to give the form designer a very accurate copy of the presentation of the original document.

  If you import a PDF file and select 'Create an interactive form with a fluid layout', the 'standard' of the original PDF is editable and properties of objects, and non-interactive form Explorer (legends, etc.) will be available.

  Concerning

  Steve

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)