Massage "cannot Access Volume Control!" on my Satellite L20

Similar Questions

• Cannot access Volume control in WinXP on Satellite Pro U400

  Hello

  I have a new U400 with Windows XP (SP3)

  today when it was lit, once the connection it comes up with an error

  "Cannot not be able to control the Volume.

  I tried to reinstall the audio drivers etc...

  Any idea?

  Thank you

  Can you please check if the sound card device is correctly identified in Device Manager?

  He worked previously with SP3 or has occurred just after its installation, because I read that there could be problems with the sound and the SP3.

• Message ' ' Can t Access Volume Control "at startup

  When I start my computer I get an information "warning cannot access volume! And I can click OK only.

  The Volume control does not work. I thing that problems start when I updated Windows XP Home Edition.

  Hi Luczek (you are the Poland)?

  Maybe this thread will help you a bit:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=18952

• The volume control on the Satellite Pro A200 with Ubuntu 7.10

  I have a Satellite Pro A200GE-1F9, I did recently to dual boot with Vista and Ubuntu 7.10. It's the first time I used Linux and most things are going well so far.

  However, the volume control (a wheel at the front of the laptop) does not control the volume correctly with Ubuntu, rather than increase the volume smoothly as with Vista, it increases in a 1/8 of maximum volume jumps, the on-screen volume control is always smooth. I think that it is at least partly due to the change of a material volume wheel, as with the latest Toshiba, I have used, for a version of software based. It controls the system volume and runs continuously, without stop at maximum or minimum volumes.

  Does anyone know how to change this change in volume for a smooth jump?

  Thanks for any help

  Hello

  given that no one here has no idea, nor pilots, nor any information about the driver from toshiba support, nobody will be able to give you some useful information.

  Have you ever google and checked the ubuntu forums? According to me, which will bring you closer the source here instead.
  So just to start to ask in the ubuntu forums because I think that someone is there who maybe has the same problem as you.

  I hope that artistry a kind of programmer. ;)

  Welcome them

• Cannot access the control panel?

  I can't access the control panel or one of its programs in a newly installed Windows Vista Home Premium.

  I can't access the control panel or one of its programs in a newly installed Windows Vista Home Premium.

  This gives a try...

  Start button > in the search box, type appwiz.cpl > press the Enter key > column to the left, click on Control Panel

  Control Panel opens upward?

• Cannot access nVidia Control Panel in Windows 8

  Hello
  I have a small problem when I try to access nVidia Control Panel. I said that I don't currently use screen attached to nVidia GPU. This is because my laptop using my Intel GPU. My question is how can I solve this problem, I need to enter the CP to change certain settings for the games, but my WIndows 8 was not preinstalled, so I can't access the BIOS for a reason to change the primary GPU.

  Hi Tarik,

  Please provide an opportunity to help Microsoft Community.

  Before you start with the troubleshooting steps, I would ask you to answer the questions below:

  1. What is the number and the model of the computer?
  2. When you open Device Manager you are able of NVidia graphics card under the graphics card?

  I checked online based on the error message that you provided and it seems that this problem is caused if you have the drivers for the graphics card from NVidia are exceeded.

  The first step in troubleshooting, I would ask uninstall you the drivers of graphics NVidia from the programs list in the control panel.

  See the link below for more information on how to uninstall the drivers from Control Panel NVidia graphics cards.

  http://www.nvidia.com/object/IO_13955.html

  Once you uninstall the drivers, visit the download link of the manufacturer provided below and download the latest drivers. Based on the model number of the graphics card, download and then install the drivers. Restart the computer after installing the drivers.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope that the information provided is help. Let us know the results, so that we can help you further.

• Cannot install Win98SE or WinME on Satellite L20-183

  I can't install Windows Millennium and Windows 98 Second edition
  on my Toshiba laptop Satellite L20-183
  I'm a primary partition that is formatted in FAT32 and make it active.

  I have install BACK with CD ROM of disk, USB
  I change my device for CD with operating system (Win ME or WinSE)
  I start the installation program and install go perfect until this
  time where Windows check for plug-and-play devices
  here my laptop freeze or I get blue with screen
  error.

  A fatal exception 0E has appeared in FF02847B.
  The current application will end.
  something more I need to regain
  the control on the laptop.

  I need some help and suggestions please!

  Hello

  I have never tried to install W98 or WME on newer units and can't write anything but check it please this Microsoft document http://support.microsoft.com/default.aspx?scid=kb;en-us;q150314

  Maybe you will find the answers here.

  Good bye

• Re: Cannot use remote control with my Satellite P20

  I just got hold of a PSP20E and the remote control (2 of them) does not work, the light blinks but that's all. When I try to set up in the Media Center settings, I get the message unable to detect the remote sensor.

  I was told by the previous owner it was working, the only thing I've done is to adapt to a new DVD (TEAC DV-W28E) player and loads of recommended Windows updates. The BIOS version is 1.6 and I'm under Win XP MCE (sp2). Any ideas would be welcome.
  Either by the way, I write a BIOS updated on a CD, or do I have to buy a floppy drive?

  Hello, Alan

  I used Satellite P20 over 2 years and I never noticed any problem with the small remote control. I guess you bought second-hand laptop and in my opinion, the first things you need to do is install the OS via recovery CD.

  When the laptop to factory settings, you must test the operation of the equipment, in particular the use remote control. Recovery image is designed so that everything should work. If this isn't the case, it may be just because of a malfunction of the equipment. As I've already said I used this laptop long enough and never noticed any problems.

  To be honest I didn t make updates because the BONE was very well set up. As I said, you can test it with recovery image.

  The BIOS update you need floppy drive.

• Cannot access administrative controls on my Windows 7 PC

  I've been hacked and concluded a group on a network that does not allow me access to administrative controls for the automatic updates of Windows. How to access MY PC, remove me from this group of network and protect my PC from allowing access again?

  Hello

  Thank you for contacting Microsoft Community

  We understand your problem and will try to help you with this problem. Please confirm to me:

  1. The user of your account using the account administrator is?

  2. Is it the computer home port or professional computer as on the domain?

  3. How do you know that you have connected to any group of network?

  4. How you deleted your PC from the network group?

  As a first step that you think that your PC has been hacked I suggest refer you to the article mentioned:

  https://www.Microsoft.com/en-us/security/online-privacy/hacked-account.aspx

  I suggest you make sure that your PC is free of any infections I suggest you use Microsoft Safety Scanner

  Run the Microsoft safety scanner.

  
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Cannot access the BIOS on the Satellite L40T-A202

  Hello!

  Months ago, I've updated the bios of my laptop Toshiba L40T-A202. After reboot I can't access the bios. I fixed it by jumping the jcmos into the mobo. Now the problem occurrd again and I can't seem to fix it with the same problem I did.

  Can someone help me? This laptop was bought abroad and I don't want to spend a lot of cash and send it to the repair shops.

  Please help me on this.

  > I fixed it by jumping the jcmos into the mobo
  With this action, you certainly killed the guarantee. I really don't understand what was the reason for this action.

  For a better understanding, I have a few questions for you:
  Have you successfully updated the BIOS?
  You can start your machine properly?
  See Toshiba welcome screen on startup?
  Windows starts as usual?

• Cannot access the BIOS on my Satellite U940-11 t

  Hello

  I have a problem with my computer.
  I installed a dual-boot Ubuntu/Windows 8.
  I disabled the UEFI mode in order to install Ubuntu. But now I have more access to Windows, and I can't go into the BIOS menu to activate the UEFI.

  I tried all possible combinations (F2, ESC, F12, F10, F8, DEL,...) and none of them opens the menu of the BIOS.

  I read on a forum that if I put my battery, it will work, but it didn't.

  How can I access the BIOS? Is there a secret combination that I have not yet tried?

  Thanks for your help.

  The F2 key is the right one to access the BIOS.
  Try this method:
  Press F2, and then press the power button to power the unit in place.

  By the way: Windows 8 and 8.1 Win requires the permit secure boot and UEFI boot mode.

• Cannot access fl.controls.Button in Flash Pro CS 5.5?

  I must be missing something obvious, but I made a couple of hours of research and you have not found the answer. I use Flash Pro CS 5.5 and have created a main class that is defined in the property of the Document class.

  In the ActionScript editor, it lists a whole bunch of ActionScript 3.0 packages and classes. In particular, it has a called fl.controls. When I try to add this to my import, however, the compiler says that the definition of fl.controls.Button (for example) is not found. Is there some extra steps (linked, paths to define libraries) that would allow me to use these?

  Note that I'm compiling/editing for Air for iOS.

  No idea what I'm missing?

  Thank you

  D

  When you try to use a component (such as a button), you have one in your library.  That is to say, add a Button component to your library.

• Re: Satellite P200-123 volume control wheel

  Is it a mechanical or software driven command?

  If I turn the wheeel 'up' the volume sometimes breaks down? It doesn't seem to be a 'stop' on the wheel.

  All tips are welcome

  Thank you

  Hello

  the volume control of the Satellite P200 is a software engine, so it has no physical stop like on older machines, which means that there are some disadvantages about the time to change the flight and the reaction control.
  Don t ask me why they have implemented this software wheel-driven, but each new series of machines there and it s predictable that they will stay with this technique...

  You work quietly with the steering wheel to avoid such phenomena as spin the wheel 'up', but the volume down.
  I have the same on my Tecra S5 and it drives me crazy sometimes, but I have to live with it...

  Welcome them

• Satellite P10 804: cannot modify the sound volume control

  Control sound Volume at the front of the unit is fixed now in all and cannot be changed.

  Can I fix it?

  I put t know if you can fix it.
  You have enough experience to disassemble the laptop?
  You have experience in welding?

  The volume control is mounted on the motherboard, it s is not easy to say what is happening there may be some loose contacts

  I think that it of better to contact a technician for laptop because it has more experience as a user of portable common like me and you!

• Just after I turn on the laptop (before that turns on Vista) I get "cannot open volume for direct access.

  Just after I turn on the laptop (before Windows Vista turns on) the following message appears "cannot open volume for direct access.  What this mean and how can it be solved?

  Thank you

  Eddie

  Hi EddieLopezA,

  ·         Which version of Windows Vista is installed on your computer?

  ·         You have antivirus software on your computer?

  This problem may occur if another utility or service, for example a virus check program or a program disk monitoring, locked the partition before you try to run the Chkdsk.exe or Autochk.exe utility.

  I have some steps that may help you.

  Method 1: I suggest you to turn off all third-party applications and check if you have a similar question.

  To do this, follow these steps:

  1. open the start search box, type services.msc and click OK.

  2. in the Services (Local) list scroll the service concerned (for example auditor of virus or disk monitoring tool).

  3. right click on the service and select Properties.

  4. change the startup type to disabled for all applications 3rd - party that could be the cause of the blocking of Chkdsk problem.

  5. click OK/apply.

  6. restart the computer.

  Method 2: If this does not help, try to change the registry value and restart the computer.

  1. click on the start search box, type regedit.

  2. in the Publisher of the registry under the HKEY_LOCAL_MACHINE subtree, go to the following subkey:

  \SYSTEM\CurrentControlSet\Control\Session manager

  3 change the Boot entry run of:

  autocheck autochk * /r\DosDevice\C: (or other)

  TO:

  autocheck autochk *.

  Note: Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.  If you want to edit the registry to fix this I urge you to back up your registry before proceeding.

  Links for:

  Unable to run CHKDSK

  http://support.Microsoft.com/kb/555484 (also applies to Vista)

  Hope the helps of information.