Mastery of InDesign CC displays do not page numbers

Similar Questions

• My canon mg2200 printer does not display the odd page numbers

  When I try to print this printer prints in this order 2,4,6, another problem when I try to print individual pages from a textbook, I hit the numbers and another page will print.

  Help, please.

  Hi Angelitos,

  Welcome to the Microsoft community.

  I would like to know some information about this printer problem so that we can help you further.

  1. You get the error message when printing?
  2. Did you changes to the computer/printer settings prior to this problem?

  I suggest you follow the link and the instructions mentioned in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• OSX InDesign CS3 5.0.4 Pages appearing not

  Hello

  I uninstalled and reinstalled several times now and run all updates from Adobe. For the life of me, I can't get all the PAGES appears in InDesign CS3 5.0.4. I am running OS x 10.6.8 I full registered CS3 Creative Suite. I can create a new DOCUMENT or BOOK, set up the page numbers amounts and sizes and margins, but then nothing happens. I have all the tools and open windows, but in the PAGES Panel there is nothing and everything is greyed OUT do not allow me to ADD more or REMOVE pages. Master Pages are not displayed.

  Anyone experience this before?

  Any help would be greatly appreciated!

  I thank in advance.

  Jeremy

  Have you tried this link: replace your preferences

• After installation or upgrade to Firefox 31, starting Firefox does not display the home page, personalize displays a blank page and the radio button does not work

  I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.

  I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.

  Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.

  My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.

  Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.

  Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.

  Any help would be appreciated. Thank you.

  You can try a different theme of Windows?

  Have you tried to start the computer using Windows safe?

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

• URL address box does not display the current page.

  With the 4.0.1 update, the URL address box does not display the current page.

  All that shows is the text: «Go to web site»

  To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".

  Is there a way to display the url of the current page?

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• My iPhone is locked. It displays the home page. I do not recognize my apple ID. What should do?

  My iPhone is locked. It displays the home page. I do not recognize my apple ID. What should do?

  Have the original owner of the iPhone unlock iPhone, otherwise it will be useless to you.

  Find my iPhone Activation Lock - Apple Support

• Wireless is connected but internet explore does not display the Web page and redirects me here.

  My laptop has been connect wireless to my own private network and public networks such as McDonald's, Panerra, etc... Now, I get a message that says internet explore cannot display the Web page, but my computer says it is connected to the internet and my wireless connection is excellent.  I also tried to connect with Mozilla firefox with the same results.  The error from the Explorer head here to get answers, please help.

  Hello

  This line, Autoconfiguration IP address...: 169.254.82.78

  This means that the card can not be set with a valid IP address, and Windows assign a null default IP.

  Maybe this can help.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I can not display the page numbers of my books

  I want to sort my books pdf by number of pages, but when I add this detail (Pages) in the folder the whole column is empty.

  How can I get page numbers to display?
  I tried the following far with the following results:
  1. the folder does not give me the ability to edit the details of the file when I right click on it so I can't enter the page numbers manually.
  2. when I right click and check the properties of the available tabs are general, sharing and customize.  Customize tab only allows me to change the folder icon.
  3 when I select the properties of one of the pdf books in the folder tabs only I get are general, Pdf, and resume and I am unable to add the page number, use one of these tabs as well.
  4. I downloaded 'Quick pdf tools' that allows me to be able to change the pdf information because I thought that the reason why the column is empty is because the PDF itself does not page number filled in, but by viewing the properties with this tool, I am able to see that the page numbers for all the pdf files are listed (and can not be changed) so I don't understand not why the column for pages shows blank in the windows folder.
  What I resorted to that adds the keywords column to the file and write the page numbers in this column because the information I enter in this field will appear in the windows folder column.  I have a number of books, and it's a little disheartening to think that I must do this for each book when the information is already there for example the page number.
  So, if anyone can let me know what I can do to make the Pages column displays the number of pages rather than remain just an empty column, I would be very grateful.

  See if the following help to view pages:

  1. in a folder, choose 'View' - 'choose details '.

  2. a dialog box "Choose details" will appear. From there, you will have many options, listed here in alphabetical order:

  * Title of the album
  * Artist
  * Attributes
  * Audio sampling rate
  * Audio sample size
  * Author
  * Flow
  * Camera model
  * Category
  * Channels
  * Comments
  * Company
  Author's rights
  * Date of access
  * Date of creation
  * Update
  * Date photograph
  * Description
  * Dimensions
  * Duration
  * Name of the episode
  * Version of the file
  * Type
  * Keywords
  * Name
  * Owner
  * Pages
  * Product name
  * Product version
  * Description of the program
  * Protected
  * Size
  * Status
  * Topic
  * Title
  Track number
  * Type
  * Year

  Naturally, some of these options do not make sense for all folders. But for those who have a sense, check the boxes next to the details you want to see.

  If you want to move an element upwards or downwards in the list (higher appear to the left in "Détails" view), click on the item in question and press the 'Move up' and 'down '.

  I hope this helps.

• HP Officejet Pro 8500 a Premium: HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.

  HP Officejet Pro 8500 a Premium does not print the docs of the computer, but will display a test page.  I constantly get a message that the computer cannot communicate with the printer.   Not only it will be not be printed docs, it will not print web pages using 11 IE or Google Chrome.

  I used print and Scan of doctor, he always reports there are no questions and print page one same test so I can not print anything else.

  Whenever I want to print, I have to restart the computer.  After the reboot, I have a chance to print.   This problem started on February 15, 2015.

  My operating system is Windows 8.1.   I have unintalled HP, rebooted, and then reinstalled the software software:

  OJ8500_A910_1315 - 1.exe

  HP Print and Scan - HPPSdr.exe doctor

  HPSupportSolutionsFramework - 11.51.0049.msi

  All versions were last uploaded on 4 April 2015.

  I have a home wireless network (router Ubee DDW366).  All other devices in the House will be printed on the printer of 8500 has no problems: 2 Toshiba laptops, 2 Android phones and 1FireHD.

  The desk top is installed with a network card Netgear, I don't know the model, but I had it tested by a PC technology to verify that the card works.   The card and 8.1 of Windows have been installed on January 3, 2015.

  I have run virus scans and analyzes malware.  Whenever they show that there are no problems with my desktop computer.  What kind of desktop? Specially designed for my listing of... without brand computer parts store.  ASUS motherboard P6X580 Premium.  Now I will probably get hacked!

  I'm at my wits end.  And it's frustrating when I need to print something and the system hangs.  I often use screen printing to a word document to save in order to restart... but then I lose all sorts of features when I pick up what I needed.  It is also a time consuming.

  This printer we served well for two years and I have expensive cartridges pending; another two cycles of recharge.

  Help?

  Addendum: can I scan with the HP printer help.  I open the HP printer assistant, he "gets" the printer information, then I select "scan a document or photo" and the printer answers.   I have no problem with the sweep.

  It has been awhile, but I played on something you wrote.  "There could be a software conflict with the HP software" everything worked very well... impression was shifted at best; just didn't know if it would work.  So I would eliminate a program, reboot clean, try to print, and then reinstall the software.  I finally found the culprit.  I had a program running in the background, occasionally.  When it ran, HP does not print.  Stop the program and I was able to print... Do not have a problem since I found it... I do not say that it was a software to share files... so I replaced since this program with something else that doesn't cause problems...  It took a long time and I couldn't work the question every day.... but I can say that I have problems printing for the past 5 days!  I can print with confidence.

• Displaying page numbers InDesign back forward in the pages Panel

  I've implemented a new Indesign document and the page numbers are rear display forward in the pages for example Panel 3-1 instead of 1-3.

  I changed the numbering in the numbering section but it makes no difference.

  When you create a new document, where your link to the left or to the right? It is found in the paper configuration dialog or in the new document.

• < af:panelSplitter >, the second panel is not displayed on the page

  I have a page by its name "Page1.jsff" which has a sign inside < af:panelSplitter >. The first Panel is displayed on the page when I deploy the application. The second round table is not displayed.
  
  When I check the page in the browser using the Firebug, I see that the Panel is located on the page but not displayed.
  
  Please let me know where I have to change in order to make the second panel displayed on the page.
  
  NOTE: The "Page1.jsff" is a view in a taskflow activity and is added to a page as a region under the Toilet.
  
  The "Page1.jsff" source code is as mentioned below
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  < jsp:root xmlns:jsp = "http://java.sun.com/JSP/Page" version = "2.1".
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  xmlns:f = "http://java.sun.com/jsf/core" >
  <!--oracle-jdev-comment:auto-binding-backing-bean-name:backing_page1-->
  < af:panelSplitter binding = "#{backingBeanScope.backing_page1.ps1}" id = "ps1" > "
  < f: facet = 'first' name >
  < af:panelGroupLayout binding = "#{backingBeanScope.backing_page1.pgl1} '"
  ID = "pgl1" >
  < af:outputText value = "Hello #{securityContext.userName}".
  Binding = "#{backingBeanScope.backing_page1." OT1}.
  ID = "ot1" / >
  < af:commandButton text = "gotoPage2Button."
  Binding = "#{backingBeanScope.backing_page1." CB1}.
  ID = "cb1" action = "gotoPage2" / >
  < af:commandButton text = "checkNameAndPage2."
  Binding = "#{backingBeanScope.backing_page1." CB2}.
  ID = "cb2" action = 'checkName' / >
  < af:commandButton text = 'displayUserName.
  Binding = "#{backingBeanScope.backing_page1." CB3}.
  ID = "cb3" partialSubmit = "true".
  action="#{backingBeanScope.backing_page1.setUserNameMethod}"/ >
  < / af:panelGroupLayout >
  < / f: facet >
  < f: facet 'second' = name >
  < af:panelGroupLayout
  xmlns:af = "http://xmlns.oracle.com/adf/faces/rich".
  Binding = "#{backingBeanScope.backing_page1.pgl2} '"
  ID = "pgl2" layout = "scroll" >
  < af:outputText value = "#{requestScope.customUserName} '"
  Binding = "#{backingBeanScope.backing_page1." OT2}"id ="ot2 ".
  partialTriggers = "cb3" / >
  < af:outputText value = 'second group '.
  Binding = "#{backingBeanScope.backing_page1." OT3}.
  ID = "ot3" / >
  < / af:panelGroupLayout >
  < / f: facet >
  < / af:panelSplitter >
  < / jsp:root >

  It has a memory effect and impact the performance also.
  And since it is not necessary for the auto bind components, why should I do?
  See http://tompeez.wordpress.com/2011/08/28/remove-automatic-component-bindings/ for more information.

  Timo

• My without wire is connected, but nothing of my browser reopens it displays the web page is not available

  My dell laptop shows that it is connected but nothing of my browser opens, it displays the web page is unavailable pls help me to solve this problem

  Hi shaikh_941,

  1. what brand & model of network card?

  2. were you able to use the wireless network connection before?

  3. are you able to use the wired connection on your computer?

  You can follow these links and check if it helps.

  In the Windows wireless network connection problems

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  For Internet Explorer, you can follow this link & check if it helps.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Does not display do not properly on the page linked to numbered list

  I have a page where I placed numbered elements (instructions 1, 2)  Notice..., etc.). When I preview the page in RoboHelp 2015 the numbered list with numbers and everything seems good. When I view the output from RoboHelp file, the page with the numbered elements seems well. I inserted a hyperlink to this page (page A), another page (page B). When I click on the link to the page from page B, do not all numbers in the list on the page.

  The numbered list was created using several levels number list icon. All lists use a style.

  This problem does not appear on all pages that has been done with the help of the same structure and formatting. Any suggestions on how I might solve the problem number on the linked page?

  Margaret Johnson

  Post edited by: Rick Stone - deleted email address

  Hello

  Hmmm, it seems to suggest that when the linked page is presented, he somehow lost the link to the CSS of the page.

  It is when linking from another page, what happens if connect you the TOC? Same behavior?

  I remember in the weird behavior see happening with this stuff in my own projects. And in my case, I think I had too many nested folders. This should not be necessary, but it is solved for me was to copy the CSS in the same folder and ensure there is no character of "shortcut" leading to the CSS. (.. /) is the abbreviation.

  See you soon... Rick

• Get PDF page numbers to match InDesign FILE.

  Version of InDesign: CS3

  Hi, I have an InDesign file with about 14 pages, and I often need to export different PDF files, being selective with the pages that I don't understand. For example, I can make a PDF of pages 2, 4, 6, 8 and 10. It of pretty easy, but when I open the PDF file in Acrobat or Reader, this program continues to consider these pages to be numbers 2, 4, 6, 8 and 10.

  Let me note that there is no page number visible on the pages themselves, and I don't want there to be. It's just at the top of the screen, in Adobe Reader, he said '8' in the box beside where it says 4/5. And also under thumbnails I scroll the document.

  Of course, there are only 5 pages and they are the ones I want, but I want Acrobat Reader to consider what are essentially pages 1-5, so that the person that reads the file does not know I jumped a bunch of pages of the original file. I think it looks unprofessional to be reading a file and see that you went from page 6 to page 8. It is obvious that the designer has forgotten something.

  Once again, because I know it's a bit confusing: this isn't a problem of automatic page number. I don't want the display of page numbers on the pages themselves.

  Thank you and my apologies if it's an obvious thing that I forget.

  Shannon

  You can also access this feature of Acrobat by using the advanced > Document Processing > number of pages.

• I am trying to print PDFS from Safari, but can not see the page numbers

  I just opened a document PDF 700 + pages in Safari and need to print the odd pages and there, but I can't see the page numbers displayed when I scroll the document. When I view the same document on an iPad, the page numbers change when I scroll but on my iMac (with the help of Safari 10) they appear not at all - and 700 + pages is a lot to go wrong! The clues how I can spend on 'display the page number?

  The default Apple PDF Internet plug-in used by Safari does not display the page numbers (except if they are in the footer of the PDF document in question), and there is no setting in Safari preferences to turn on this feature. Your best bet is to download the PDF file, then open it in preview or Acrobat Reader, where the thumbnails will be the correlation to page numbers. Then you can select several arbitrary thumbnails using the control button to print those selected pages. In the Pages section of the print Panel, you select "Selected Pages in the sidebar".

  The PDF Internet plug-in installed by Adobe Acrobat Reader or Pro displays the page current and total page in its turnaround Panel. If there are page numbers in the footer of the PDF file accessed, they are not deleted. You must enable Internet Adobe plug-in to Safari preferences: Security Panel.