Matched presets-but poor video quality and audio-PE9

Similar Questions

• Audio Fadin incoming and outgoing, but the video quality remains high.

  Hello. I am regularly skyping someone, but the incoming audio signal began fade in and out and sometimes mute altogether. The video quality is very good and she can still hear and see me OK. The volume for Skype and everything else is wound up to the maximum. I tried skyping someone else and the problem was not present.

  I do not understand how the audio quality that I can fade, but the video quality does not change. I would have thought if they had problems of band bandwidth then the video would have refused and the Lady, I'm not talking would receive me in this good quality either.

  Is anyone know something about this problem and a possible solution?

  Thank you

  Hello. In the case where someone comes across it because they have the same or similar problem I found the solution. It turns out, somehow, that the volume of my microphone had been wound up to the maximum. Because Skype reduces the audio signal entering when you make noise, the person I was calling I couldn't hear because I was broadcasting involuntarily every tiny noise. This interrupts my incoming audio. For some reason I have the microphone picks up a ridiculous level of background noise. Only, I discovered this after a test of back to back with my mother's laptop. To stop the problem I just wrapped up my microphone volume down in audio on Skype settings until there no sign up tapping or other noises. So I send you not now sounds that would hurt my incoming audio. It also explains how the Lady I was calling could still hear me fine and the quality of the video never abandoned, but the audio signal coming at my end was.

• Poor video quality on M40X

  Toshiba M40x, I've installed quicktime, but the video quality is still poor in best mode. How this can be improved.

  Hello

  And what video you mean? If I watch TV online video is poor but nothing for this.

  Be more specific in your request.

• Keyboard shortcuts for the video Composite and Audio Waveform

  I work in Premiere Pro CS6 on Mac OS 10.10.5. I am constantly switch between views video Composite and Audio Waveform in the Source monitor Panel. To do this, I have to use the mouse to click on the key icon, and then select one of the points just at the top of the context menu. My workflow would be so much faster if there was a keyboard shortcut.

  The official page of default keyboard shortcuts indicates no shortcut for these menu items. Mac OS system preferences > keyboard > shortcuts [shortcuts App] allows me to create shortcuts for application specific menu items, but not for context menus.

  Is there, however, a way that I can tell Premiere Pro CS6 to use a keyboard shortcut for the video Composite and Audio Waveform views?

  You can create your own... If you scroll the list link you to that, there is the Source section of monitor... which has options short keyboard available for your two wishes:

  

  Then, use Cmd / Alt + K to do your editing of the keyboard shorts... Scroll way down to find this section, then create a short. At the bottom, it will tell you if it comes into conflict with one another. Here I come to make Composite video, abbreviated as CC2015.2:

  

  By clicking on the line to the right of the effect you want to order makes these empty lines appear the "x" you will see in this view... click again and you can start typing your proposed short. If your entry on this line is already in use, will appear this very practical warning:

  

  So... do you some useful shorts!

  Neil

• How can I unlock video 1 and Audio 1 on the Timeline (CS5)

  I'm new to using prepro so please bear with me.

  When I want to insert a video clip at the beginning of the video 1 on the Timeline, existing and audio clips are static, so the incoming clip will rest at the beginning (too much riding the other), but I would like to than the other elements to move to the right, including audio in Audio 1.

  Help section of the House, I read how to unlock the timeline in part as follows, '... ". for example, if you want all clips to the right to change video 1 and Audio 1 to move to the right while leaving all the audio clips 2 in place, lock in sync on the video 1 and Audio 1.

  I have to lock the 2 video and/or Audio 2 (that I have nothing there). Just need to to move to the right when I insert another clip.

  Use CTRL while dragging to the timeline. That will insert instead of overlay and it is quite easy to see when you look at the icon.

• I need video driver and audio presario sr1403wm

  I need video driver and audio presario sr1403wm

  Marfisi, welcome to the forum.

  I suggest to update XP to SP3.  Then, go to the Web to Realtek website and download the latest driver AC 97.  This will update the audio and video.

  If your problem is solved, please click "accept as a Solution.

• Making the best use of space for the quality by balancing the video bitrate and audio settings?

  I have a few questions about the first export still / encoding in encore. I am trying to create a dvd single layer, where I maximize overall quality using as much space as possible.  The video is 97 minutes, SD 720 x 480, 29.97 FPS and consists of interviews for the most part, as well as b-roll hd cameras and stills, rare title graphic card.

  1. I can use dynamic link to send the sequence that appears to maximize the space available, however I have heard that using DL is generally frowned upon and I myself cannot tell what settings it uses (for example vbr, 2 pass, etc.). Is my interpretation that DL is not the ideal way to go wrong? If DL is just as good as a separate output, is there a way to know what parameters it uses?

  2. I used a bitrate calculator and tried a Min: 3.5 target: 5.5 Max: 8 audio output PCM and I found myself having a little more than 400 MB of unused space. When someone recommended a Min: 5.5 target: 7 output Max 8.5 the file size is too large with a simple DVD layer. I read that it is recommended to use an exit instead of PCM, if the video is over an hour audio Dolby. My question is is it a best practice to balance needs of flow rates and audio and video? I realize, of course, by using more data PCM is 'better', but it is usually best to go on the road to dolby and have more space to increase your video bitrate? What is the audio difference type that requires a high-end system to discern? Y audio data loss is worth for the benefit of video bitrate higher?

  I know it's a lot, just trying to maximize space to get the best possible performance. Thanks for any help/advice you can provide.

  -Nick

  As most of my videos are closer to 2 hours usually, I always used Dolby Digital, PCM takes so much space and I prefer to use this space to increase video quality.

  Note that by default, if you import a .wav (PCM) file into Encore, it transcode automatically that Dolby, unless you have changed specifically the default settings of transcoding in Encore.

  A decent basis for coding rule is 560/minute = bitrate, so 560/97 = 5.77 and I usually just round off a little for menu overhead and margin of safety. This requires using Dolby to 192 k, so I would use 5.6 average bitrate.

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Poor video quality using windows 7 "play to" with DLNA Sony Bravia KDL-40EX700

  When I use the option "play to" in windows media player 12, everything works but the video streams on tv is of very poor quality!

  Most of the time the video is not yet play full screen. When I first set all and used television to find the video file, it played in the perfect resolution and quality, but now it does not matter if I have the video on the TV or choose play... two ways I get bad video quality.

  Are there settings for the streaming video quality in windows 7? I have the current firmware for tv update and tried on two different computers with the same bad results.

  What can I do to fix this?

  Mr. Goetz,

  There is nothing wrong with the drivers of your graphics card. The TV is one that makes the video file not the graphics card on your PC. The reason you have a bad video quality is the limited support of the multimedia formats that is supported by your TV. Generally, Sony's Bravia TVs have a limited set of media formats supported and for this reason, most of the time that the Play and Win7 will send transcoded versions of the video on television. Usually, the way Play works is the following:

  -Play questions the TV for supported media formats

  -If the TV supports the type of media you're trying to make, the Play sends native data flow to the TV. The quality will be provided by your video file.

  -If the TV does not support the native format, the Win7 also offers versions of the same video file transcoded: MPEG-2 and WMV for versions.

  -Play preffers to make reading possible at any time so he will choose a transcoded version if the native format is not supported. DLNA mandates support for MPEG NTSC or PAL MPEG formats, so this will be the common denominator.

  I tested several Sony's Bravia televisions in the last years of the development of Play, and several times reading transcoded. I guess that this is the case for you as well. Unfortunately, nothing you can do, unless Sony decides to support your media file nativelly. To make things worse, the qulity of the transcoded version depends very much on the quality of native files (win7 transcode in a lower resolution than the native.) It will be not high-end). If the native file is HD content, the resolution of transcoded stream will be pretty good for a TV 40 ". If the stream resolution is SD or smaller than (usually flows that can be downloaded on BitTorrent), resolution transcoded will be less than that. On a big TV screen, it will be stretched and the quality will be very poor. More the native file resolution and the resolution of the TV, the bad will be your experience.

  Therefore, could you please tell me what is your multimedia file type?

  Hope this helps

  Thank you very much

  CCazang@MSFT

• Satellite P100 - 10 p: poor video quality with 3rd site nVidia Driver

  I have a satellite P100 - 10 p (PSPAGE) with 7900 GS and when I install the new drivers from laptopvideo2go.com video quality (163.76) of all films is bad.

  The image is rasterized with each media player (VLC, MPC...) and screen sometimes "POPs" for a second.

  Everything goes very well with 84,00 Toshiba drivers but I can not play games like BIoshock and Stranglehold with this driver.

  Help, please.
  Thank you

  Hey Drago

  It's a very bad situation. Toshiba with each laptop must product offering functional and because of who offer tested drivers. These drivers are suitable for each laptop model and also have the function of protection. This means that the graphics card will not forced to run at the highest level.

  As you can see with the original driver you have problems, play games. For me this is nothing unusual for laptops. Problem is that all of the updated drivers the only are not supported and tested by the manufacturer of the laptop. I recommend you to use tested driver Toshiba. In the end maybe you must compromise between game and watch movies.

  By the way: original DVD movies are also so bad while you use pre-installed WinDVD?

• Live messenger activation causes poor video quality

  Whenever I have activate Live messenger (Windows xp, version 2009, Build 14.0.8117.416) my monitor turns off completely. After a few seconds the video links and this is horrible. Right-click on a zone empty of my desktop and go to properties, a time I'm on the view tab, I see that my video quality went to 8-bit, low. I can use the drop-down list box and select 32 - bit and 'ok', and my video quality goes back to normal. However, whenever I click on a link in live messenger, or select an option Menu tab in live messenger that my video goes back to 8 bits.  What's worse, is that my Messenger friend sent me a video link 'you tube '. By clicking on the link caused my video problem to cycles in the horrible back 8-bit to 32-bit normal. Every few seconds, the screen goes white and back, it is the other video quality.  Previously, I was able to have video conversations with my friend, but now we have problems (she can see and hear me, I can't hear him). I also noticed that the 'video', and the point of 'Photo' of the bar menu is grayed out. Live messenger does not show even I have a webcam, although this option is selected.  Why do I have all this trouble with live messenger. It started a few months ago.   Oh, one last thing... When I close Live Messenger, my video quality returns to normal as if nothing happened.

  Hi DavidSrams,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Method 1

  I suggest that reduce you the hardware acceleration on your computer and check if it helps.

  (a) click Start, click run, type desk.cpl, and then click OK.

  (b) click on the settings tab and then click Advanced.

  (c) in the performance tab or on the Troubleshooting tab, move the Hardware Acceleration all the way to the right ( Full position).

  (d) click OKand then click close.

  (e) If you are prompted to restart your computer, click Yes.

  Method 2

  If the previous step fails then I suggest that you install the updated drivers for the graphics card on the computer by visiting adapter manufacturer's Web site to download and install the drivers, check if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  For further assistance, you can post your request in the forums of Windows live.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Fairly new laptop, terrible video quality and its delay. help please!

  I have a HP Pavillion G6, g6-22213sa computer laptop that I bought about 6 months ago, its functioning, Windows 8 and AMD Quad Core A8 - 4500M accelerated processor. 15.6 ", 1 TB harddrive, 8192 MB DDR SDRAM. the video quality on anything from youtube, personal videos etc. is terrible it's very pixelated, the sound is also slow, which means that it takes a few seconds before you can actually hear anything. Can anyone help please get everything back to normal. for necessary information, just ask you please, im not a big technical guy.

  Thank you..

  Hi Laurent,.

  -What browser are you using to access Youtube?

  -Remember to make changes on the computer before the show?

  In order to improve the quality of Youtube video, you can try to change the settings for video quality on the Youtube page.

  https://support.Google.com/YouTube/answer/91449?hl=en

  As you mentioned that the video quality is pixelated, I you should uninstall and reinstall the sound card drivers and graphics cards and check if it makes a difference.

  -Press the Windows key and the X key, then select Device Manager.

  -Browse graphics cards, right-click on the video driver and click on uninstall.

  -Browse sound, video and game controllers, right click on the audio driver and select uninstall.

  -Restart the computer. Windows will automatically try to detect the hardware and try to install the drivers.

  If that fails, visit the computer manufacturer and download the latest video and audio drivers based on the computer model number.

  Hope this information is useful. If you have any questions, let us know.

• video AutoPlay and audio AutoPlay is not possible at the same time?

  Hello

  I have an article with a video immediately set to AutoPlay and audio to play immediately.

  But the video stops playing the audio boot. Is this behaviour¿attendus

  V31 IOS8

  THX in advance

  Hans

  Yes, who expects this behavior. Play a multimedia clip stops any other clip media.

• Poor video quality in Skype [Huawei Ascend P1]

  Hey there.

  I tried to share the video with my contact on Skype with Android, but my contacts have indicated that the quality of the video was very bad - as 240 p. I have the setting video quality in Skype my phone. Unit is Full HD phone.

  My Internet on mobile is mobile 2 M / 0. 5. unlimited m. Be better to download to transfer high video on Skype?

  Thank you.

  Hello hpguru, with Skype for Android 4.4, I wanted to say "Skype for Android ' 4.4 or" Skype 4.4 "for Android, just so the version of the app Skype Android OS version 4.2.2 is fully supported by Skype.» Please try our latest application available on the store.

  Thanks for using Skype!

• Question video FLV and Audio

  I have a situation where I am loading a video (FLV) in a Video object on the stage using the NetConnection and NetStream video classes and script action. I want to know if the FLV file I load has a soundtrack or not (some movies don't) so that I can choose to play a default sound track or let the original soundtrack of the film play. Such a thing is possible?
  
  I noticed that the NetStream object seems to have a property, once that 'play' was called, called "audioCodec. I can find no record of this property anywhere, and I wonder if it could be used to test for audio. No sound from my test scenario, and the codec is listed as 0. It would be a reliable indicator of the presence of an audio track? Is there a place I can find the list of codecs and the integers used to represent them in this property?
  
  Thank you very much
  
  Cree

  Sorry, just found the live doc to work with metadata that informs me that flv without audio tracks return "undefined" for audio related metadata. Thanks, that should do it.

  C

• Audio and video clips and audio but no video on others

  When I import a clip at the pool, ago also good audio and video. But when I drag the clip on the timeline, the audio is moved. I work with various clips in the same format of video, taken with the same camera and with excerpts of what is happening and with others that is not. Also on occasion it just drag audio and video. Does anyone know how to fix this? Have been looking around the forums for a while now, I can't seem to be able to find an answer.