matching link ISDN question

Similar Questions

• SX20 and link ISDN with TC6

  Hi guys,.

  I recently upgraded a SX20 and link ISDN to the new TC6 and after the upgrade, I can't make ISDN call.

  I can see and manage the ISDN link from the SX20 configuration web page, but the status of the ISDN connection is: error, SIP not saved.

  I use H323 network and I don't use SIP between SX20 and ISDN link and with the old version, I could receive and make calls. Now when I try to dial the ISDN using the new interface TC6 endpoint indicates that it does not find the ISDN link.

  Thank you for your help,

  Adrian

  Hi Adrien, Valentine's day.  Theres something happens with outgoing enabled on the link and the Codec for this, and we have two CDETS opened on them.  There are always SIP service is enabled on the Codec with link and link itself.  Codec uses IPV6 local links for the link itself.  Even if the sip xstatus on the codec has its inactive etc, the codec message still SIP REGISTER to the device registration link.  Link runs a FWD SIP process that handles the request.  Sorta like a mini SIP registrar if you want.  Codec will send the message to REGISTER using link-local IPV6 address.  Example of message is less than 200 Ok.

  77582.64 SipPacket PacketDump: Proto: SIP, name: REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0, Direction: outgoing, RemoteAddress: [0000::000:0000:0000:cd39]: 15070, GroupEntity: b27d07c1f5f298c492db68040b320ca6, time: 77582634 content:!

  77582.64 SipPacket REGISTER sip: [0000::000:0000:0000:cd39]: 15070 SIP/2.0

  77582.64 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport

  77582.64 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.64 SipPacket CSeq: 47083 REGISTRY

  77582.64 SipPacket Contact:

  «': 5061; transport = tls >; + sip.instance =»

  77582.64 SipPacket of:; tag = 116a994ac2281c72

  77582.64 SipPacket to:

  77582.64 SipPacket Max-Forwards: 70

  Road to SipPacket 77582.64:

  77582.64 SipPacket allow: INVITE, ACK, CANCEL, BYE, update, INFO, OPTIONS, CONSULT, INFORM

  77582.64 SipPacket User-Agent: TANDBERG/518 (TC6.0.0.876266)

  77582.64 SipPacket expires: 3600

  77582.64 SipPacket authorization: Digest-nonce = "d9605a7da8be22af8c0e7f52b3de4a5f5125fcd3", domain = "MARCIE", qop is auth, username = "djkvvknn", uri is "sip: [0000::000:0000:0000:cd39]"

  ", response ="3b27b753cb9bcf38cc2431b767bce643", algorithm is MD5, nc = 00000002, cnonce ="84addca2a68f6c5f9b657a94653a4bae"

  77582.64 SipPacket supported: replaces, timer, 100rel, gruu, way, way out

  77582.64 SipPacket Content-Length: 0

  77582.64 SipPacket

  77582.64 SipPacket >!

  -----------------------------------------------------------------------------------------------

  77582.65 SipPacket SIP/2.0 200 OK

  77582.65 SipPacket Via: SIP/2.0/TLS [fe80::250:60ff:fe83:c52a]: 5061 branch; = z9hG4bK45a7681a50ebbdc5b98e2f91bff6b438.1; rport = 41246; receipts = 0000::000:0000:0000:c52a

  77582.65 SipPacket Call-ID: b27d07c1f5f298c492db68040b320ca6

  77582.65 SipPacket CSeq: 47083 REGISTRY

  77582.65 SipPacket of:; tag = 116a994ac2281c72

  77582.65 SipPacket to:; tag = e84d13204776ebc2

  77582.65 SipPacket server: fwd

  77582.65 SipPacket Contact:; (+ sip.instance =""

  77582.65 SipPacket Content-Length: 0

  77582.65 SipPacket

  77582.65 SipPacket >!

  -------------------------------------------------

  I removed my own addresses, so you get the picture here.

  It is the same for the link.  Link will send REGISTRY as well to himself.

  Even if your using H320 as outgoing Protocol call, messaging between the codec and the liaison unit is still SIP as the outgoing call is still SIP of the codec for the link even if you chose H320.

  You can see all happening all by running: Journal ctx sippacket debug 9 and connect the output to see the messaging back and forth between devices.  This is why the Service SIP on the codec cannot be disabled.

  The outgoing enabled on both devices and it records not as what Adrian has met is odd. So the question has been filed and is under investigation.

  CSCue57128 - SIP in a strange state connecting to link ISDN (Codec)

  CSCue73049 - outbound SIP on ISDN link activation causes lose her registration (link)

  These are new, so the visibility may not be there yet.

  If you see a problem with the link is not not able to register, check to see if outgoing SIP are enabled on the link.  If so, turn it off and start.

  Do the same on the codec as well.  Disable outgoing SIP and restart the computer.  There may be some cases, you do not see this, as the investigation continues with the bug above two ID's

  I hope this helps.

  VR

  Patrick

• Issue with LINK ISDN and VCS

  Dear Expert

  Link ISDN is capable of working with VCS?

  As I go through the link Cisco TelePresence ISDN administrator guide, he said that endpoint must be registered at VSC when you use the mode ISDN PRI E1 and ISDN BRI Euro type.

  Is that means whenever I want to make a call ISDN with ISDN LINK, I de-register endpoint of VSC on gateway H323 and SIP pox

  Currently my endpoints use VCS as gateway H323 and SIP pox

  Thank you

  Tung

  Hello Tung!

  I wasn't looking for it, but I would say that the Administrator's guide shows just examples, which could

  be configured, not exclusive requirements.

  See the section called "Complete example with an IP infrastructure" and VCS

  In short, endpoint is connected to ISDNlink device and the ISDN link records for VCS.

• Hide the warning of record to link ISDN configurations.

  Hey guys, pretty simple question which might not have an answer.

  We set up a bunch of SX20s with ISDN links, and each end by showing "is not (System_Name).

  It seems a little messy and is almost certain to make the user think that there is a fault as soon as the slightest thing goes wrong, like the end does not turn when they try to call or something.

  A way to hide it or the name of system to show strength?

  I hope I'm just something very stupid.

  : D ! Bonus points: how to display the ISDN number entering as appositive on behalf of the ISDN link connected.

  When you are connected with an ISDNLink, endpoint and the link communicate via SIP, so there is no need (if you are not also connected to an IP network) to have H.323 enabled at all.  If you set H.323 to off, it will be also get rid of the message "not registered".

  Just put it to 'direct' If you use it via H.323 independently to make calls over an IP network as well as the ability to use ISDN.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• TMS Directory link ISDN paired devices

  Hello world

  I currently have a problem trying to get a directory TMS containing details of ISDN on a SX20 with an ISDN connection.

  I created a manual list directory in TMS that contains details whether H323 or ISDN for various parameters.  The directory is detected by the SX20 and it shows all the details of H323, but none of the ISDN are listed.  The same directory, when it is applied to an edge 95, displays all the entries.

  I tried to create a directory containing only the ISDN numbers, and assigning that to the SX20 and then nothing is indicated.

  My first impressions are that that TMS has information as an 'ISDN' entry, and as SX20 has similar directory information stored in the form "H320", that the two are not compatible / correcftly - translation and so it's a TMS bug and/or TC software.

  In addition to the telephone directory, all the other functionality works as expected.

  Versions:

  TMS: 14.1.1

  SX20:TC7.0.1

  ISDN link: IL1.1.0

  Edit: I tried to push the same directory for a C60 and who was not either - TC6.3 - only the H323 entered were seen running - ISDN those lacking, is not purely a matter of SX20.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

  Hello

  There is no link to the SFT ISDN support. When 'route telephone directories' is set to Yes, TMS removes the entries she wants not the point endpoint to deal, that is what is happening here. TMS knowledge, SX20s cannot dial numbers H320.

  ? Kjetil

  Sent by Cisco Support technique iPhone App

• Link request / Question of isolation

  Hi all

  We currently evaluate Thinapp, and I have a question about on the side of the isolation of the things.  Here's the situation:

  (1) Java 1.4.2_08 already installed as part of the construction of the BONE

  (2) Thinapp Firefox 3.0.8 and goto javatester.org and he reports the basic Java build (as expected)

  (3) Thinapp Firefox 3.0.8 again but this time, including Java version 6 release 13 via the Application Link - goto javatester.org (reports v6.13 as expected)

  (4) load Firefox leave from step 3, and then load the original Firefox and javatester.org reports v6.13

  What do you guys expect?  I had expected (hoped) in step 4 see Firefox Java 1.4.2_08 reports in a single window and v6.13 in another window.  But it seems that the first Thinapp had Firefox to be sets loaded standard.

  Maybe I'm missing something but I thought that this technology would be to be able to deliver multiple copies of the same application bundled with various versions of Java, but it doesn't seem to be the case...

  Any info much received.

  Thank you

  Rob.

  This stuff is specific app. Firefox checks for example at startup to see if another copy of Firefox is already running (unless you include that-no-line switch remote control). If it finds another copy running (virtual or a native copy), it will indicate that copy to open a new window. With Firefox so you'll see that (unless you include the - no - remote switch) which version you started the first will also be used for subsequent launches. Outlook has this behavior too.

  For the Oracle customer, this problem does not exist. It is no problem to pack two different versions of the Oracle Client in two different packages and run them at the same time.

• Elegant keyboard / mouse combo - Link-5 question

  I recently bought a HP combo elegant key/mouse wireless.

  However, I prefer a mouse with extra side so buttons and more, I bought a HP X 6000 Wireless Mouse that comes with the receiver dongle USB Link-5.

  I was hoping to only use a USB receiver to connect both elegant wireless keyboard (P/n: 672648-002) and mouse wireless X 6000, but it did not work.  I don't know if the keyboard is compatible with Link-5 or the receiver combo-compatible mouse.

  Is it possible to use one of these dongles for two devices?

  Thank you

  Julz77, welcome to the forum.

  It is my understanding that technology receiver dongle USB Link-5 requires the firmware on the side of the device and the USB receiver.  It is supposed to work with only a family of devices.  I doubt that the mouse X 6000 has the necessary firmware.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Software BlackBerry BB link and questions Z10

  I just updated my OS Z10 from T-Mobile to 10.1.0.4200 and everything, including the Wi - Fi calls works fine.

  I have connected to my MacBook Pro and BB link 1.1.1 (Build 33) via USB and run a full backup. In order to get backup to work I need to cut Wi - Fi.

  Link to Blackberry keeps telling me that an update of the operating system Blackberry 10 (10.1.0.4200) is available and it is stated that it is 18.1 MB in size.

  The operating system that I've updated from T-Mobile has been 148 MB in size.

  Anyone know what is happening?

  Problem is solved

  Pending updates were a few preloaded apps that I had deleted.

• Dynamic Link Library question - Java User Exit

  I get an OGG-01122 error when you try to start a pump output user who reads a path in a user Java output; from the report file:

  Context of the source:
  SourceModule: [er.userexit]
  SourceID: [/ home/ecloud/workspace/Build_OpenSys_r11.1.1.0.0_078_[34109]/perforce/src/app/er/userexit.c]
  SourceFunction: [open_user_exit]
  SourceLine: [662]

  [< DATE > OGG-01122 error opening module./dirprm/libggjava_ue.so - LD.so.1:: excerpt: fatal: libjsig.so: open failed: no such file or directory].

  ... that the error in the documentation says the following:

  [OGG-01122: error opening module {0} - {1}]

  Cause: An error occurred during the extract has attempted to open a dynamically linked library
  module.
  Action: Make sure that the library exists and that its location is indicated
  correctly. If the problem persists, contact the Oracle Support.

  
  ... I don't know if this is where I should put it, but I have a LD_LIBRARY_PATH variable in the environment in which runs the GGSCI... and both LD.so.1: and libjsig.so are located in this path, and they all have two permissions to the user who runs GGSCI to access to, so I do not know what

  
  Thanks for any help / advice

  I'm under Oracle GoldenGate V11.1.1.0.0 for Java on Solaris 64-bit

  $ uname - a
  SunOS 5.10 my host Generic_147440-01 sun4v sparc SUNW, SPARC-Enterprise-T5120

  It seems that it has been properly set now. Did you stop and restart the process manager after having set the LD_LIBRARY_PATH? This environment variable passed to the Manager at boot time and Manager passes parallel to the extract. Here is the article of knowledge which deals with this:

  GoldenGate Java User Exit process Abending opening module libggjava_ue.so error cannot open the shared object (Doc ID 1515631.1)

  Let me know if this does not solve your problem.

  Best regards

  Mary

• Is it still possible... newbie link/photo question

  I know that I can link something to a whole picture. Is it at all possible to have few links located on different spots of a photo? Someone asks me to do it for our site, but I just can't understand it. I touched only in Dreamweaver and I don't know even where to look in the different help pages! If someone can point me in the right direction, it would be great. If it helps, here is the page that they want me to work this way... http://www.hartleynature.org/ecology/1918.html

  Click on your image, open your properties window, bottom left (I'm in CS3 so yours may be different), look for card.  Click the tool you want to use (oval rectangle or polygon) and bet on the section on the image that you want to link.  You should be able to go from there.

  Gary

• link database question...

  This issue is long - my apologies. but I tried several combinations and none of them work, and I'm very stressed!
  Suppose that global_names is set to TRUE. I can't connect to our HQ database as sysdba to check the name of the service.
  If my tnsnames.ora file has the following entry:
  REMOTE_HEADQUARTERS =
  (DESCRIPTION =
  (ADDRESS - (PROTOCOL = TCP) (HOST = headquarters.machine.name)(PORT = ###)
  (LINK DATA = (SID = REMOTE_HEADQUARTERS))
  )
  I need to make a database connection to this database, of it...
  MYDB. DHCP. REGARDLESS OF =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = #. #. #. #)(PORT = ###))
  (CONNECT_DATA =
  (SERVICE_NAME = mydb.ourservername)
  )
  )
  so when I log in MYDB and want to create this database link, can I really be sure what is the service name of the headquarer - since it is not explicitly specified in the tnsnames.ora file?
  c when you declare the link db, what should I put as the "connect_string" here:
  create database REMOTE_HEADQUARTERS link
  hq_username identified by hq_password
  using "connect_string;

  I think you've identified the difference...

  this entry allows me to connect to the remote system in SQLPLUS:
  
  REMOTE_HEADQUARTERS.OTHER_SYSTEM =
  (DESCRIPTION =
  (ADDRESSS - (PROTOCOL = TCP) (HOST = headquarters.machine.name)(PORT = ####)
  (CONNECT DATA = (SID = REMOTE_HEADQUARTERS))
  )
  
  while this one does not....
  
  REMOTE_HEADQUARTERS =
  (DESCRIPTION =
  (ADDRESSS - (PROTOCOL = TCP) (HOST = headquarters.machine.name)(PORT = ####)
  (CONNECT DATA = (SID = REMOTE_HEADQUARTERS))
  )
  

  Check your domaine_par_defaut setting in your sqlnet.ora file.
  Net Services reference:
  Use parameter NAMES. Domaine_par_defaut to set the domain that the client more often up name resolution requests. When this parameter is set, the default domain name is automatically added to any unqualified network service name or service name.

• Design of 5.1 VCenter Linked Mode Question

  I currently have the following configuration for vCenter 5.1:

  Domain controller Windows 2008 - Windows Server 2008 with SQL Server 2008 vCenter

  Now I have another data center in another part of the region by running its own vCenter 5.1 and adhere to the same domain controller that above; For work-related Mode should I this vCenter server use the same SQL Server or I can configure separate SQL Server for it?

  Thank you

  Hello

  Yes instances separate vCenter will indeed be different databases to use

  I have also attached a complete list of pre-requisites cordially connected mode configuration

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=%2Fcom.VMware.vSphere.install.doc_50%2FGUID-7634B78B-07E5-44EC-B5A0-CBEE842A20FD.html

  I hope this helps!

• cfselect - need to add the option - links the question

  Hello
  
  I'm using the cfselect tag. I'm lie options to the tag using a cfc. I used to be able to insert the < option > tags extra as this option > < option > < < cfselect > < / cfselect >. Using the binding of CFCs, the < option > tags are not displayed. Thoughts?
  
  Here is the code:
  
  Thank you!
  
  cfwild

  Not a clean answer, but maybe this might work for you, in a pinch. Generate the first option zero in the query by using a Union statement or add it after the query using the code below.

• Matching C20 with ISDN link question

  Hi, can someone help me on initial connectivity C20 with ISDN link? I C20 codec with 1 LAN port which is connected to link ISDN endpoint port, the link ISDN of LAN port is connected to the internal network. I configured the IP Link ISDN: XXX.XXX. XXX.251 and codec on XXX.252 both are the same subnet.

  Given that a single LAN port, how can I access the web interface of the codec to check and perform pairing? If in case, the codec is on firmware older supporting not pairing function so how can't I perform manual synchronization. Cannot access the ISDN link by series.

  Hello

  CAN´t you just plug your PC on the network internal (same subnet as the ISDN link and the codec) and access the Web interface of the codec: http://x.x.x.252 ?

  What versions of software are you using?

  / Magnus

• Registration of VCS for LINK C60 / ISDN

  Good people, another noob question: we have points of endpoint (Local) that are a combination of a Codec (C40 and C60) who are matched with an ISDN connection. The customer currently uses the Codecs from point to point and conference (4 participants) limited bridge. We bought a 5320 MCU, VCS and TMS. I'm a little confused on how we can get the Codecs and links properly registered and VCS (TMS).

  We must register those endpoints for VCS points and be controlled by TMS. We do not save the Codecs and links ISDN separately for VCS, and if so, we put the ISDN links in the area of ISDN?

  I can see on the Codecs that I can define a H.323 Gatekeeper, but I'm a little more naïve about how to save the ISDN links. I went through several "Getting Started" and the Configuration Guides for ISDN connection (and also for Codecs), but at the moment I'm a bit confused.

  Most of the video conferences will be by IP and maybe a single to an external endpoint ISDN connection. These conferences will be either point to point or bridge for a 5320 MCU.

  If anyone can point me to a good, concise reference source, I would be grateful.

  TIA and sorry to be a noob.

  Mark

  Hi Mark,

  As Patrick alluded above, I have experience with these things before.  Yes, you can save all your endpoints to your VCS points so they can all call each other and the 5320MCU, although the device that is attached to the ISDNLink will be capable of scoring calls or rear via ISDN.

  So, as you have summised above, the C60 with the ISDNLink to connect to ISDN part and then also participate in the Conference of 5320MCU.  This means that the C60 must get a Multisite License installed to manage calls video of what he'll do next part.

  If you have additional questions, feel free to ask.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.