Material mix/fade Windows 'Volume Mixer?

Similar Questions

• Y at - it controls fade or volume for the audio volume?

  Y at - it controls fade or volume for the audio volume? For example, if you want to use an audio clip and adjust the volume.

  Cabbagepatchkid

  First Elements 12 Mac

  You should be able to click with the right button on your audio files and select fade, followed by fade in Audio or Fade Out Audio.

  Please check out my blog on bland

  First Elements ATR troubleshooting: PE11: Timeline Fade Out shortcuts and stretched / remappe time video

  As mentioned I'm strictly a Windows elements user, so I guess that the first elements of Windows and Mac

  are the same on this feature.

  Please let us know if you need any clarification on the above.

  Thank you.

  RTA

• Windows Volume control

  Product name: HP Pavilion DV7-1261wm

  Product number: NM295UA #ABA

  OS: Windows 7 ultimate (64 bit)

  My computer gets all the HP/Microsoft updates automatically.

  My volume control up and down automatically. I choose silent and he will remain silent. I turned off my built-in microphone. I had to uninstall my SmartMenu HP controls because the buttons would not answer and the on-screen volume display activate every time that the windows volume control would move causing me not to be able to play all the games. I ran MSE and MalwareBytes and did not find any virus or ad/spyware that causes boredom. I don't ' know what to do... I really don't want to have to go through the process of windows re - install or reinstall game.

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery, connect the power adapter and start Notepad.

  Kind regards

  DP - K

• CS5 save for Web doesn't let me save in the Windows volume

  I have a Windows Server 2003 volume mounted via the Services for Macintosh (AFP, SMB, no I'm pretty sure). Even if the Mac and the Windows volume can control independent of filenames longer than 31 characters, due to the sustainable management of FORESTS (I guess) I've never been able to record directly from any application to this volume of Windows with a > 31 char filename. This has never been a problem that I kept my short file names.

  After installing just CS5, however, save for Web is not let me save any file, no matter how the nickname: "names of more than 31 characters only are not supported on the destination volume. I can't save for the Web very well on my desktop and save under... the volume of Windows, but not save for Web for Windows volume.

  The save for Web is set to 'Pictures' only (no slices so it's only to create a single file).

  Any thoughts? Known issue?

  Thank you.

  Maybe that's part of what happens (and is not something like our names, internal files or anything else I recognize).

  It's probably something internal to save dialog box (NavagationServicesSavePanel), and it assumes that the file systems will be able to handle the long names.

  Again, via SMB to connect to the server may remove part of the restrictions.

  CS3/4 was based on carbon and used the different APIs for a large part of the file structure.

  CS5 moved to cocoa and has a new set of API files to process.

• Is there a way to make the snap windows volume mixer all volume of requests to match the main volume?

  I noticed that windows likes to change my settings of volume for some applications, probably in an effort to help me, but it seems to create more problems than it prevents. For example, when I start a game, my itunes volume is lowered. The way I calculate it, this often leads to a variety of different volume levels for different applications after awhile, and if I turn up the volume with my volume key (which increases the overall volume) they only rise proportionally. So if the volume of Chrome is 50% and iTunes' volume is 10% and I increase the volume to maximum, iTunes volume only goes up to 20%, forcing me to manually open the mixer volume and level everything. I noticed the overall volume take a gray line in the whole of the mixer, is there a way to force all applications to align on this gray line and does not move unless I change myself in the mixer? Uncheck everything in the volume control options didn't fix it.

  Thank you.

  The way I did earlier was to move all the sliders up to 100% (look at your ears, however, if you have headphones on - the "bong" sound system is going to be quite noisy!).  After that I did, all volume settings have been aligned on the line grey and synchronized with the master volume.

• Cancel the MAPPING of Windows volumes?

  I don't know about scsi unmap command for vmfs recover space on a LUN EQ. Is there an equivalent for Windows data volumes connected via iscsi?

  Hello

  On Dell PS Series San, you must run EQL FW, 6.x or higher and the volume cannot be set up for EQL replication.  It is as well rep SYNC and async rep.

  Much depends on the version of Windows that you're talking about.  Windows 2008 R2 and do NOT naively support UNMAP.   It does support the SSD TRIM command.  However, if you install the printer Dell HIT / ME software he installs a driver to modify the order ADJUST order cancel the MAPPING on the fly to Dell PS volumes.   This applies to volumes that are DIRECTLY related to the EQL volume via the MS iSCSI host initiator.  A virtual machine on a VMFS partition is not supported by HIT / ME software.

  Windows 2K 8 and CSV de Hyper-V R2 volumes does not support UNMAP.  This is a MS issue, unrelated to the table.   Volumes Windows 2012 and R2 CSV can bear UNMAP only when you use virtual disks VHDX, if using the recovery of old VHD is not taken in charge.

  An additional advantage of HIT / ME in all cases taken in charge, is through the crib of Snapshot Auto GUI, you can force recovery anytime option.

  Note: If you are using snapshots, you can not immediately retrieve the expected amount of rear space.  The snapshot can always refer to this data, so until the snapshots that reference is deleted it will be allocated.

  Kind regards

  Don

• Reattach the EqualLogic iSCSI for 2012 Windows volumes

  Hello

  We use EqualLogic, Windows 2008R2, HIT and initiator iSCSI access volumes. Now I'm re - install OS to Windows 2012. All materials, IP addresses, volumes, host name will be the same on the new operating system. BONES of some changes. Will it be the right way to remap the iSCSI volumes to the new operating system:

  1. on windows 2008 R2 take the volume offline in the disk management console.
  2. disconnect "Discovered targets" in the Windows iSCSI initiator.
  3 collect volumes offline in Manager Dell EqualLogic Group (to restore the connections).
  4. the new 2012 Windows Installer 4.5 HIT and set (is this version of the correct software for Windows 2012?)
  5 activate the volumes in the Dell EqualLogic Group Manager.
  6. Discovery target and connect to targets.
  7 collect volumes online in the OS disk management console.

  These steps are correct?
  Are they all necessary?
  Is a correct software 4.5 for windows 2012 HIT?

  Thank you

  Re: connections.  Are you referring to the iSCSI to table sessions?   If so, those are dynamic.  When you stop they will disappear.

  If everything is the same, so technically Yes.  Shutdown, you can reload and bring it to the top.

• Support shared Windows volume via ESXCLI?

  Is it possible to mount a remote shared volume in Windows using ESXCLI?  (5.1 ESXi)

  I tried this (the volume is shared as 'swlib' on Windows Server):

  esxcli nfs storage add - host = 192.168.123.12 option - share = swlib - volume-name = SWLIB

  but continue to get this result:

  SysInfo return operation State error: unable to connect to the NFS server.

  Some tips on how to do this?

  Thank you.

  the article mentioned by memaad shows how to enable NFS on Windows services and get on ESXi hosts.

  I created a little video in the past to mount the NFS share that is running on Windows to ESXi. You can check here

• Best practices for Windows Volumes greater than 2 TB in ESXi 5

  I hope to get some feed on the advantages and disadvantages of the few options we have for connecting large LUN for Windows 2003/2008, invited in ESXi 5.

  My VMWare cluster is fiber connected to an EMC Symmetrix SAN then I can create any size LUN.

  The species is the need for a volume of 6 TB in Windows 2003

  My belief is that I have only two viable options, but please correct me if there is a better way.

  1. present a 6 TB lun to the cluster and configure it as a RDM and GPT in Windows.

  2. present three 2 TB Lun to the cluster and configure as vdmk and dynamic disks in Windows in order to get the volume of 6 TB.

  I suppose we could also say that 2 TB RDM disk and dynamic is a variant 3 but I see no reason to do this than option 1, since we use vmfs5

  I am looking for advantages/disadvantages of each method. What is the community and is there a good/bad experience that be it.

  1. present a 6 TB lun to the cluster and configure it as a RDM and GPT in Windows.

  It is advisable to set up like 6 TB RDM physical to Virtual Machine

  Benefits:-

  Windows will have direct access to the LUN

  Performance will be good, because the logic unit number is not shared to all other servers.

  Disadvantages: -.

  You will not be able to use snapshot, esxi have physical control over RDM.

  cloning has some difficulty as you need to remove the front ROW you clone etc.

• 11 GR 1 material OBIEE and Windows Server 2008

  Hello
  I tried to decipher certification matrices but came short and thought I would ask here.
  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?
  
  
  See you soon,.
  J
  
  
  Easy points: P

  Hi kremer,.

  OBIEE 11 GR 1 material is certified to run on Windows Server 2008 64-bit? That is to say if it will support Oracle?

  OBIEE 11 g is supported on Windows server 2008 64-bit, but component RCU is only supported on 32-bit windows and 32-bit should be downloaded from the oracle site.

  (2) IE 7 supports only with OBIEE 11 g, the suggestion is go with MOZILLA 3 or higher.

  This has answered your question.

  See you soon,.
  KK

• Unknown material? In Windows XP

  Laptop: HP 9812eo

  OS: Windows XP downgrade

  Hello

  This question has probably been asked many and I consider myself quite an experienced modern PC user, but I'm stumped! After downgrading my vista PC wife (I like vista, but the woman is not so eager to try something new) to Windows Xp, I can not find the drivers for the following hardware, they are yellow in Device Manager:

  Modem on High definition audio bus

  Ethernet controller

  I did a bios update and succeeded in getting the work of firewire, but these two components seem a no go. I'm sure she will have no use for a dial-up modem or ethernet, but it could be handy in the small of the situations. If any of you have an idea for a driver windows xp for the rest, it would be more appreciated and save me a lot more long nights!

  Jack

  Ah thanks for the reply,

  I actually found the problem, whenever I installed a driver using the Setup.exe file, it would never work or return an error. So I decided to open up the system and update the driver myself, but I couldn't let windows search for the driver as it always returns a negative result.

  What I had to do was to choose the driver myself (select as appropriate *.) INI file) and then it worked. The never installed installation utility driver and made windows auto search. In this case, I had to select the driver myself and do a force install but now everything works.

  Pain in the ass, really, but at least everything is up and running, I'll have to take a driver back up and burn it to a cd to save me all this trouble in the future!

  PS the only ethernet driver that worked was that a 2003 nothing newer nvidia driver would work unfortunately

  But all fixed

• Why my Behringer UMX610 fader flashing volume when he slipped there?

  When I try to play the organ with my MIDI keyboard and I wan't to in - or lower the volume, it will blink? Is there a way to reset all controller assignments?

  Watch a video of the keyboard here: https://youtu.be/OPqwvRClcQM

  To reset all controller assignments in Logic Pro X... remove the main and CS preference files...

  You can resolve many issues by restoring Logic Pro X back to its original settings. This will not affect your media files. To reset your settings preferences of the user to Logic Pro X to their original state, do the following:

  1. Logic Pro X to quit smoking
  2. In the Finder, select go to folder menu reach.
  3. Type ~/Library/Preferences in the field 'go to folder '.
  4. Press the Go button.
  5. Delete the com.apple.logic10.plist file from the Preferences folder. Note that if you set custom shortcuts, it will reset to the default values. You can export your custom key as a preset before performing this step. See the Logic Pro X user manual for details on how to do this.
  6. If you are having problems with a control surface in Logic Pro X, you can also delete the com.apple.logic.pro.cs file in the Preferences folder.
  7. Restart the computer.

  Note: If you cannot find the files listed above, you follow the instructions exactly as written!

• Qosmio G40 - material unknown in Windows XP

  Hello

  I installed Windows XP (MCE SP3) and now I am looking for a driver for this unknown hardware:
  ACPI\SMCB0C0\4 & 2FFE84EA & 0
  With the infrared receiver SMSCIR drivers, I get a yellow yellow exclamation point.

  Many salutes
  Rambodieschen

  I would try to install a driver of CIR (consumer Infra-red) on the Toshiba site

• I think windows: volume of evil: Please insertvolume gateway + keybrd in drive E

  TIS message came after copying photos on my E drive on cd

  See this:

  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

• Windows Volume License 7: key vs 32-bit 64-bit?

  Then I searched everywhere and can NOT find any documentation on this... I had asked someone (from MS) by CAT earlier, but (stupid me) I forgot to save the logs.

  My company has a MAK to Windows 7 Enterprise (64-bit) key. We can use the same key for 32 - bit or will we need to purchase a separate license for that? We are trying to find alternatives to XP Mode (use VPN - restricted... networks and all that), and we would simply use Windows 7 in a VM. However, Windows Virtual PC does not support 64-bit OS comments, and we are a bit dodgy on security issues for the use of different software to the VM.

  Any help you could offer would be greatly appreciated.

  Then I searched everywhere and can NOT find any documentation on this... I had asked someone (from MS) by CAT earlier, but (stupid me) I forgot to save the logs.

  My company has a MAK to Windows 7 Enterprise (64-bit) key. We can use the same key for 32 - bit or will we need to purchase a separate license for that?

  You can use the same key to activate a 32 or 64-bit version as long as it's the same edition.

  We are trying to find alternatives to XP Mode (use VPN - restricted... networks and all that), and we would simply use Windows 7 in a VM. However, Windows Virtual PC does not support 64-bit OS comments, and we are a bit dodgy on security issues for the use of different software to the VM.

  Any help you could offer would be greatly appreciated.