Matter of adjustment capacity of conductor

Similar Questions

• 6 s iPhone and IOS 9.2 Bluetooth issues - help

  After updating IOS 9.2 that Siri does more work in my BMW or any other Bluetooth connected device.  There is a band of purple on the top of the phone when it is connected and no sounds are picked up by the microphone the phone or vehicle.  I restarted the phone and disconnected the Bluetooth with no will.  Is anyone having this problem?  It's a matter of adjustment or a bug in 9.2?  I hope it's fixed once it has completely stopped my free hands capacity.

  Jeremy

  I have solved the problem but have no idea how.  I turned off voice search google, tour the siri works and Siri has started working in the car.

• Camera roll display problem

  Ive just got my new 6 s the Iphone and there is something strange happens with my photos in my camera.

  When I open my camera to review pictures Ive took the picture of the charges, and almost instantly, kind of re-loads and changes colors and sometimes a little change of positioning?

  Its been like if its showing me ive photo taken and then reload in a 'better' version of the photo, often colouring is clearer and less orange toned.

  I can't select the first photo or whatever it is, and it actually changes if fast, that I don't even have time to screen the original until it changes.

  Note: this does not happen with screenshots or when the photo was published with any sort of filter

  Its so boring honestly through and have to wait for each picture to reload. Its probably a matter of adjustment but I can't get out so if anyone has a solution would be great

  Using iCloud photo library? If "Optimize storage" is active, most f your photos must be downloaded from iCloud, until you can view.

• How can I change the size of display in Firefox, I get Hotmail too small and too big Flikr

  Get the font size too small to Hotmail when viewing through Firefox. The screen size and the font size is too large when displaying Flickr via Firefox. I'm sure it's a simple matter of adjustment of zoom and I saw him change while I'm online. I can't just not work what I did to change it.

  Use NoSquint: https://addons.mozilla.org/en-US/firefox/addon/nosquint/

• Satellite Pro L20: 37, 5 GB on the disk instead of 40 GB?

  I bought a satellite pro l20, which is supposed to have a 40 GB hard drive, but there only a hard drive Go 37.5. is there any reason its slightly smaller than its supposed to be?

  Hi Matt,

  The capacity of your hard drive is usually quoted as 40 GB because the actual capacity is measured in bytes. For GB 37.5, this would be equivalent to 37.5 X 1024 X 1024, which gives a figure of 39,321,600 (usually quoted as 40 GB).

  I use a 80 GB hard drive in my SA30 and gives a total output of 76,29 GB.

  It's just the way the hard drive industry cites the ability of their readers. :-)

  Kind regards

• Satellite Pro P100: Need for questions to three strange questions

  Satellite Pro P100: Three strange things on an otherwise beautiful machine

  1 Ethernet limited to 100 Kbps (at this level it really should have been 1 GB)
  2. no micro internal (can't understand why they who excluded)
  3. most irritating batch - top N2 digital key has "where @ should be but the guys @ when you shift press on it." The ' has @ where "should be and type" when you shift press on it. If I was a touch typist and did not look at the keybourd while typing but I'm a Visual typist and I'm continually spoil it - and I'm used to it. If a techie works on my machine, he made his nut.

  Toshiba there perhaps the keys to spare for us?

  Hello

  (1) it is very strange because the satellite Pro P100 was equipped Gbit Lan card and you should be able to use it. I think there could be some bad LAN setting in Lan Card Properties. Check it! You can access it in the Device Manager-> ECS-> Lan card-> properties. It is then a new window and you will find the different tabs. Here check the Advanced tab

  (2) what to say, Toshiba seems different designs for laptop series with different hardware configurations. Your P100 was not equipped with the internal mic. This is why you must use an external mic.

  (3) sorry, buddy, but I do not agree with you.
  This isn't a hardware problem. You use the keyboard language settings simply false. Yes! It s a matter of adjustment.
  I assume that you use the English (United Kingdom) and non-English (United States).

  Check it out

• Satellite Pro 4290: How to solve the problem of error IDE #1

  I recently purchased a DVD - ROM drive to put my optical drive Sat Pro 4290 a CD in DVD - ROM. As suspects, I am the problem if the drive is not recognized and get error IDE #1.

  I can get windows XP to recognize the disk by deleting the secondary IDE channel in the material and then look up the new material again. Then installs the IDE channel and then detects and installs the DVD-ROM and works very well. I restart the computer laptop and back to square one!

  I understand that it is something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  I don't want to risk it and I was wondering if anyone finds an easier way to do it?

  Thank you very much

  Hello

  > I understand it's something to do with the settings of the motherboard and someone has solved this welding pins in different locations on the IDE connectors.

  Set to true if not 100%. This isn't a matter of adjustment on the motherboard, but the setting of the CD/DVD drive.
  The Player supports different master\slave\c-salt settings and if they are not compatible BIOS does not correctly recognize drive.

  On external hard drives (for desktop) it s possible to change these settings by changing the jumper, but it is not possible for readers portable slim.
  Portable settings are stored in the firmware!

  I found various non-legal tools that can change the master/slave/c-salt settings but I wouldn't recommend using it.
  The risks are too high so that the reader will have some damage.

  So, try to replace the drive with a compatible

• Satellite a200-1sv screen remains black at startup in Vista

  Hello

  We have a problem with Toshiba Satellite A200-1sv my girlfriend: when we started, most of the time, the screen remains black, while the computer starts: after awhile, we can hear the sound of windows (vista).

  In addition, if connect us another screen of the computer, it displays the scheduled start screen. In order to use the computer, it must launch a few times... The support guy where we bought the computer told us "the computer is not compatible with Vista, we cannot do something".

  Can we do something?

  Thanks in advance,
  Ju

  I have to smile to read this message
  Mainly, this statement is funny;
  > The support guys where we bought the computer told us "the computer is not compatible with Vista, we can't do something."

  I think that this laptop has been delivered with the Vista operating system. So why the guy said that the laptop is not compatible with Vista?  :| …. that's nonsense.

  First the A200-1SV belongs to the PSAE6E series and it s fully Vista capable.
  Secondly, like you say the external screen displays home Toshiba screen and so I guess that's just a matter of adjustment.
  What you can do is to use the FN + F5 key combination to switch between display devices.

  If it doesn't help to try to put the laptop back to the factory settings using the Toshiba Recovery CD!
  In this case, the new OS, driver and tools will be installed and then everything should work fine.

  Good bye

• Satellite L300D close - battery loses most of charge after 2 days

  Battery of my Satellite L300D loses most of its charge after only 2 days to be closed.

  What is battery failure or software.

  I have several machine with this problem

  Hello

  I doubt that there is a fault.
  I think that it s a matter of adjustment.

  I read in some articles that Wake up on LAN option must also be able to if the laptop is not enabled.
  Please disable the Wakup on LAN and other options in the BIOS.
  In addition you may disable this option in the Device Manager-> LAN card-> properties-> Advanced tab
  This also for the WLan.

  Last but not least, make sure you use the latest version of the BIOS.

• Portege M400 and Autocad2007

  I can not change the color or thickness of a layer using the dialog box. You can select a new color/line thickness, but the change is not executed. It works on my desktop computer. I think that it is a video driver issue. Does anyone have a solution?

  Hello

  Well, it seems that there is a newer version of the AutoCAD application.
  Maybe it s just a matter of adjustment. I m not an AutoCad expertise but check the Toshiba page driver and compare versions of display driver.

  I also recommend to ask for support for the production of AutoCad.

  PS. Also on this page:
  http://www.jtbworld.com/autocad2007.htm

• Put Hibernate & standby does not work on Portege 2000

  I recently bought a refurbished Portege 2000. It did come with any documentation or Toshiba software installed. I grabbed what I thought good to the download section of the support page and that you have installed.

  I have the Toshiba console works, the utility of accessibility and performance of the Intel thingy. Energy saving works now and so do all the functions of the shortcut out of standby and standby key extended (FN + F3/F4).

  Have I missed something in the download section or y at - it a particular order, to which I should install?

  Thanks in anticipation,
  Coastal

  Hello

  As a first step, we should clear the issue of operating system, I assume you are using Win XP.
  Am I wrong? Have you installed the electricity saving for Win XP right?
  Two different Power saver utilities are available on the page. 5.04.00 and 5.01.00.
  I advise to use the last being!

  The other FN keys work correctly and therefore, it seems that the important applications, such as the common modules and Hotkey utility have been installed correctly.

  I think that it s just a matter of adjustment. Hibernation is disabled by default.
  If you want to use the FN + F4 you must first enable it in settings of standby power.
  The same should be done with standby mode which can be used with FN + F3

• Wallpaper options are greyed out

  I am running Windows XP Home Edition and for some reason my wallpaper decided to disappear when I tried to change the options are all greyed out except for the color. I can change the color of everything I love. When I load window my load of wallpaper and it should be then disappear.

  I scan my computer with kaspersky (my anti virus), window malware remover and appeal of home trend micro (online), but none have found any viruses. I read somewhere that it may have something to do with my dual core processor

  Help!

  Hello

  :) I put t think its virus or any CPU.
  For me it s a simply matter of adjustment
  I put t know that you edited on computer laptop you but you must check the option titled customize Office in the display properties. I m not 100% sure, but I think that it s a second tab called Desktop
  A new window should appear and you should check the WEB tab.
  He should t be any option checked. Remove the brand of my current home pages.

• trouble with hyperlinks, I did a right click and open to access all links

  I can't access the links without right clicking and then clicking on 'open '.   Is it a matter of adjustment?

  Hello..
  What is the operating system on the PC?
  
  Reset the default settings of Internet Explorer... Try this...
  1. Internet Explorer. > > Tools > > Internet Options > > Advanced > > reset Internet Explorer. -Reset.
  
  This should fix the problem...

• External output video - Satellite Pro L20

  My L20 recently stopped video output (DVD, programs) to an external projector. Images, etc. are fine, but no program within it - just an empty space. Another output of the screen is not affected. Everything used to work properly.

  I am not aware of having changed anything on the machine.
  Is this hardware, settings, software?
  Suggestions welcome.

  Hello

  I think that it s just a matter of adjustment.
  Something similar happened on my laptop.
  I started the program WinDVD for DVD movies, and then I spent on TV.
  It's a wrong procedure! It of important and necessary to switch to external monitor first, and then run the program WinDVD!

  Maybe it of the same problem! Check it!

• Tecra A8 - 104 speakers do not work on Linux Ubuntu 7.04?

  I installed Ubuntu 7.04 and tecra speakers are silent. The headphones work fine. Any ideas what to update? Thank you

  Hello

  I m not an expert in Linux but it looks like the audio driver works correctly and it's only a matter of adjusting the sound!
  Please check the settings of Linux-> sound

  Try running Kmix and there should be a separate volume control for "via" - change that to heart!

  In addition, I recommend you visit some Web sites on the Linux Umbuntu.

  Good luck