Satellite L300D close - battery loses most of charge after 2 days

Battery of my Satellite L300D loses most of its charge after only 2 days to be closed.

What is battery failure or software.

I have several machine with this problem

Hello

I doubt that there is a fault.
I think that it s a matter of adjustment.

I read in some articles that Wake up on LAN option must also be able to if the laptop is not enabled.
Please disable the Wakup on LAN and other options in the BIOS.
In addition you may disable this option in the Device Manager-> LAN card-> properties-> Advanced tab
This also for the WLan.

Last but not least, make sure you use the latest version of the BIOS.

Tags: Toshiba

Similar Questions

  • Re: Satellite L300D-11V-CD/DVD drive not recognized after upgrade to Windows 7

    Hi, I have a Satellite L300D-11V model pslc0e and have upgraded to 32 bit Windows7 ultimate. I downloaded all the necessary drivers on the toshiba site, but he acknowledges that he has a cd/dvd drive!

    Can I put any disk in, but it will not load up or even acknowledge that the car exists!

    Help, please!

    Thank you

    James

    Please, read here:

    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

    This is for Vista but works for win 7 too. I checked it myself before.

  • If I do the free trial of 30 days for photoshop how to stop use it so I don't is not charged after 30 days? It will just fade away? or if I continue to use it I will be in charge?

    If I use the free 30-day trial for photoshop I get charged if I continue to use the application after 30 days? Or how to stop using it after 30 days

    There is no charge and no financial information that must be given to your 30-day trial.  your software will stop working after 30 days so keep using it beyond this period will require payment.

  • Satellite L300D-245 - battery problem

    I was using my laptop on battery only and all of a sudden it turned off even if she had 40% of power left and would not turn on. I plugged it into the outlet. the battery led doesn't light up. I turned on the laptop and everything was ok, but for the battery. the laptop read it, but it does not load. It's 40%, so I plugged it in, and it turns off immediately. the battery is now at 0% and the laptop runs on the power adapter only.

    the laptop is old, vista 1 year.

    Last week, I saw the same behavior on my laptop of a friend s. I'm not 100% sure but I think that the battery is defective. He has already ordered a new.

  • Satellite L30 - 14F - battery low CMOS and delivers after BIOS update

    For 1.5 years, I have a Toshiba Satellite L40 - 14F PSL4CE.
    I encounter the error of CMOS LOW battery but I was unable to find to replace. Where he is?

    Second problem: after a BIOS update (version of the site) with the same setting in Windows XP, after I left the lid downwards and then save the workbook hesitates for about 2 seconds and the music stops. These problems were not present before the BIOS update.

    Thank you for the cooperation.

    Hello

    The BIOS battery can be replaced by only authorized service. to do this the laptop everything must be dismantled. By the way: see s operating manuals. You will find info how to load the BIOS battery.
    If I remember correctly the laptop must be connected to the adapter sector more than 48 hours. Check in the manuals.

    Maybe is my bad English, but I do not understand second problem.
    Can you please try to explain it again? I'm sorry.

  • Satellite L300D c000021a (PSLC8E) blue screen on startup after win7 64 bit

    Hello

    The error code on a blue screen after startup (after loading win7 logo) is:
    STOP: c000021a {fatal system error}

    Installed Win7 Ultimate x 64.

    My bios version is 1.80

    Someone has any idea how to solve this problem?

    Thanks for help

    Have you tried to install the original preinstalled Toshiba system using the recovery disk to check if the same BSOD error appear?
    If this is not the case, do.
    This BSOD can be linked either hardware or software problem and good work and pre-configured system could clarify the situation.

  • New T430 with Toshiba THNSNF128GCSS SSD loses Win8.1 OS after one day of use!

    Hi has anyone encountered the following problem:

    Brand new T430 is imaged with Win 8.1 via SCCM 2012, everything works fine for a day, you can happily install apps, copy the data and reboot etc..

    Then without warning after a restart or start from scratch, the laptop cannot see all of the data on the hard drive and try to perform a PXE boot.

    Test installation disk in another PC (SATA cable connect directly as 2nd drive), or USB hard drive caddy and it of like it's a new disc, ask just to initialize the disk, then doing so allows you to format the drive and everything looks ok, but not data available.

    BitLocker is also used as part of construction for SCCM deployment, Bitlocker ends without problem. We tried to ride one of the task force hard readers who lost no data/operating system on another PC and you see, obvious to use the Bitlocker key entry to allow access to the data but no problem.

    9 portable computers T430, we received recently, all the same configuration, 4 have failed so far.

    Readers spend the fine diags, we initially got the first 2 discs replaced by Lenovo and have not seen a problem since then, but its only been a few days, the last 2 who has lost all the data, we have tried to re-imaging today and both are setup with Windows 8.1 new and no error logged in the event viewer etc.

    Its very strange and hope that it's not just us having this problem?

    Yes, it was a defective batch of about 20 x SSD hard drives, very poor by Lenovo and Toshiba!

  • Satellite Pro L10 battery did not reach full charge

    On my Satellite Pro L10 battery only reaches 85% charge if leave all night. Is this likely to be a problem with the supply power, circuits inside the computer or charge the battery?

    I need to know the best place to start to spend money!

    Some experience that may or may not apply to:
    -Battery system is around 2.5 years
    -The battery lasts about 1 to 1.5 hrs that seems fair considering his age and his level of violence (left connected permanently and not recycled periodically)
    -Very recently would not pass, with or without the power adapter connected. Solved by removing AC, then the battery, running on AC, then turn off and reinsert the battery. Everything now works on battery or AC.
    -Over problem, system has been itself decommissioned at random. Since the resolution of the problem of market it was not randomly turned off itself, YET!

    Any help or advice would be much appreciated. Thank you.

    Chris

    HM, sounds to me like a hardware problem. But the problem is to understand where exactly the error, if you have the following options:

    * Contact a service partner chartered for a hardwarecheckup and an accurate diagnosis of your machine ([http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT])
    * You can buy a new battery (since it could be the battery, I guess)
    * You can sell this machine on ebay and buy a new one :)

    Hope I could give you some new and fresh ideas. There is almost no other options or solutions, the it s so your choice.

    Greetings

  • When the capacity of the battery falls Satellite Pro U300 occasionally lose power

    Hello

    I suspect you have a defective battery (standard installed on the laptop) on my new Satellite Pro U300 - 11 k and I wonder if someone had a similar problem.
    When the power drops to 10%, my laptop occasionally loses power. In the range of less than 7% capacity always loses power, i.e. either fails to start the hibernation, or is unable to complete the process (I can always tell if power was lost during hibernation because of the characteristic of the system of protection HD sound). I did several tests, especially in the power saving mode. "High performance" mode power seems to be a little more reliable, but still fails to shut down less than 5% of the capacity. The level of Hibernate by default on the Toshiba Windows Vista pack is as low as 2%, so I can wait until it is able to work at this level.

    Overall the battery capacity is about 1 h (Media Player, fashion high performance, maximum intensity) at all about 2 to 2.5 hours (slowed or text editor, mode, brightness low power saving). Charging time is about 1 hour (seems too short). They are difficult to objectively assess that Toshiba avoids quoting the specifications of the battery, but I consider the question of the reliability of the above as being a serious (do not want to take the risk of damaging the HD). I am considering visiting the service center, but leaving both the computer and the battery with them would be a nuisance for me and I would rather avoid it if I can. I wonder if I can claim the warranty on the battery alone?

    Any suggestions would be welcome.

    Background information:
    -The U300 is a few weeks old.
    -The battery has been fully charged and discharged (approximately 15 times since purchase).
    -Cooldown takes 1 h - 1.5hrs
    -J' using Vista Business
    -J' went through the power settings to make sure they are ok and to change threshold levels
    -I am an experienced business user, I use a laptop computer at work which stops always perfectly to the power level of 3%

    Thanks for help

    Zawrek

    Hello

    > Overall the battery capacity is about 1 hour (Media Player, fashion high performance, maximum intensity) at all about 2 to 2.5 hours (slowed or text editor, mode, brightness low power saving). Charging time is about 1 hour (seems too short).

    Reading your post, I do see no battery issues! Everything you say is right and not a malfunction.
    Please note that the Vista operating system needs much more computing resources and the battery is much more emphasized running Vista!

    Please also note that the level and time to discharge the battery can be different! Everything depands of the use of the laptop!
    All the portable devices and parts waste the power of the battery at the same time and that's why there are differences in the discharge procedure.

    Don t be afraid and take advantage of your laptop but if you think you will need to contact the ASP in order to clarify this issue, then feel free to contact service technician.
    They should be able to help you.

    Good bye

  • Satellite L300D-243 won't charge or turn on.

    I have a Satellite L300D-243 with a dead battery. But when I connect it to the mains no lights turn on at all and it won't turn. Try with another charger and has worked for a few minutes then the same problem - she's dead and not coming back not new - none seeing nothing even if it is plugged. Have tried with and without battery but still the same problem. Would you say it is the battery? Or something more serious?

    > Would you say it is the battery? Or something more serious?

    I would say it looks like a more serious problem, if only the battery would be defective, then the laptop should still work using the AC adapter only but it doesn t so it looks like motherboard or similar problem
    Are you sure that this new adapter is ok? This must be verified before trying to replace all other parts

  • Satellite A500-1GG (PSAR9E) loses 5-7% of battery in standby mode

    My fully charged Satellite A500-1GG loses about 5-7% in stop for like 24 hours.

    A similar question was already posted, but it is now locked. The solution he had to disable the "wake-ups", but I disabled them (BIOS v1.50) and I still have this problem (I think we can call it a problem). Imagine the accusation that he would lose if it has been disabled for a week...

    Is this considered normal? If not, is there one solution other than the one posted before?

    It's normal. The same thing on my Satellite A300. When I turn off and there all night off and not connected to the power running on next day it always shows between 88 and 94% battery charge.

    There is nothing unusual and happens on all laptops. Of course, the values are not fixed and a battery loses capacity during the night so that others.

    http://APS2.toshiba-tro.de/KB0/FAQ9C012L0001R01.htm
    http://APS2.toshiba-tro.de/KB0/FAQ9C015N0001R01.htm

  • Satellite L300D - where can I buy a CMOS battery?

    My sets of L300D clock to zero and restart got the CMOS battery message. He took part to reach the battery only to see that it is welded on.

    Where can I get a spare part, or which output I'm looking etc.? It is a http://cellpacksolutions.com/Search_Data_Sheet.asp?ID=1/V80H/P

    And once I have welded in I am wrong to run again?

    see you soon

    Hello

    The CMOS battery is a lithium-ion battery and can be charged also.

    With other words, turn off your laptop and plug in the power adapter for 24 hours. After that the CMOS battery should be fully charged and it does not lose the data and more time.

    Check this box!

  • Satellite L300D begins only after the battery has been drained and recharged

    I have a satellite L300D that has a problem at startup. Last week, it closed but got stuck on the "Disconnect" screen for a long time. Finally I manually turn it off by holding down the power button. Don't think no more of him it happened sometimes with my computers. However, when I went to turn it back on - it was nothing. Power lights came to the front of the computer, but not to screen at all. Could not even access the BIOS. Nothing. It was like that for several days.

    Tried all the common solutions - removed battery, disconnect the power supply and press the power button - still nothing. Tried w/o - just AC, just the battery. Even stripped down to the motherboard to see if I could remove the CMOS battery and reset the CMOS but it is soldered on the motherboard. Put all back together, still nothing.

    Finally, I had to recharge my cell phone using a USB adapter and given that the computer had power I tried the usb port and it worked (for example, I could charge the phone - still no screen on the computer). The computer's battery is dead and I plugged it in. That evening, after the battery was full, I tried the computer and it has perfectly worked. Started correctly, shut it down, restarted and it was fine. Unplugged this night there and reconnected again in the morning and... nothing. Just a black screen. No BIOS.

    Killed the battery again then reloaded and now my computer is working again.

    Any ideas on what could cause this problem?

    Thanks in advance.

    Hey Buddy,

    In my opinion her only the only one you can is update the BIOS like Akuma suggested. This problem is not related software so that s the only option you have I think. You can download the latest version of the BIOS here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    If this is not the case, contact an authorized service provider please. Guys can fix all this hardware related problems can diagnose this problem. Maybe the motherboard or something else must be exchanged.

    Good luck! :)

  • Satellite L300D-13s - disk drive will eject when booting on battery

    When to start my Satellite L300D-13 s on power electric battery drive ejects when starting upwards and then he won t keep any kind of CD, DVD or CD-rom discs however it works fine when starting on the grid.

    The battery is fully charged and there is no other reason why it shouldn't t work.
    Can anyone help?

    Windows Vista 32-bit.

    Hello

    > When starting my Satellite L300D-13 on power electric battery of the disk drive ejects when starting upwards and then he won t keep any kind of disc
    It's really strange, sometimes it is hard to believe that this would be possible

    I m not quote that if the reader of CD/DVD may be affected and cause this problem but nothing is impossible and that's why I think you should talk to the ASP in your country and have to explain the whole story I think guys won't believe something may be possible, but in my opinion the CD/DVD drive must be verified.

    Good luck buddy

  • Need to buy 19V 4. 7 a charger for the Satellite L300D

    I would be delighted if someone could help me.

    My charger for my toshiba satellite L300D broke recently I bought a 19V 4. 74 a charger and it blow my battery even though I was told it was only a little more powerful and would not effect the laptop!

    I have searched a 19v 4. 7A charger but can not find on the internet or anything!
    Can someone please help me if I can't find one I'll have to buy a new laptop.

    Hello

    I suppose you might find at the bottom of the old power adapter part number.
    The easiest procedure would search internet this partnumber to find an online retailer.

    As the last option, you can order the part of Toshiba ASP in your country.
    Guys can always provide the laptop parts compatible.

    Good luck

Maybe you are looking for

  • Resoultion problem with Camileo X 100

    I recorded a video with my new X 100 camcorder and when I transferred the AVI file from the SD card via a card reader to my PC, I was shocked to see the poor resolution of the AVI file. I'm doing something wrong? DOWNLOAD PHOTO > > [Photo resolution

  • Some content of Nano are not not in iTunes. Cannot remove

    My 3rd generation Nano is recognized by iTunes (v 12.3.2.35 - 64 bit), and a large part of the content of the Nano is visible in the menu of the Nano on iTunes. However, there are some podcasts and albums that are not visible/listed. In other words w

  • Satellite Pro A100: DVD UJ850 of disk I/O error - will not read disks

    I got a glance at other posts on the site of the people who have had a similar problem and I'm starting to think that my drive is defekt! The defective hard drives after extracting audio from a CD to store on my MP3 player. I arrived at almost the en

  • If I pass windiws vista 7, do I lose the ms office is already installed?

    I have a CD to upgrade to Wind 7 and wih if all programs especially MS office 2007 will remain or deleted?

  • the ink tank cleaning

    I pressed by accident in the menu of my printer "ink tanks cleaning. I don't know what that means exactly. I tried to stop the process, but it did not work because my printer had already taken control of my computer. My printer model iseskjet J110a s