Maxify MB2320 will not print after changing the ink cartridge

Similar Questions

• Office Jet 6500 will not print after changing the ink cartridges

  Office Jet 6500 will not print after changing the ink cartridges

  Hello

  This doesn't seem to be a problem with the printer itself and not Windows. I also suggest to contact the manufacturer. In this case, HP.

  Please see here: http://www8.hp.com/us/en/support-drivers.html

• Printhead 7510 gliding is more to the center when I open the printer to change the ink cartridges.

  I have an all-in-one Photosmart 7510. My slides print head is no longer the center when I open the printer to change the ink cartridges. It remains in place on the right side. I can't access the cartridges. Otherwise, the printer can print pages without problem - it is not blocked when printing. I have had this printer for during 9 months - it is a new problem.

  Thanks, but I returned the printer for a replacement - it was still under warranty.

• HP laserjet p1006: does not print after changing the toner

  I just changed the toner. The green light is on, but when something I send to the printer to print, the orange error light. Before inserting the toner, I pulled the Strip in transparent plastic attached to an orange tongue and the black cloth. I tried to reinsert the toner and turn on/off the printer again. Help please if you can. Thank you!

  Hi @cindycb,

  Welcome to the Forums of HP Support! I read your post and to see that when you try to print after changing the toner, the Attention light. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure all the orange, packaging material is to remove the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Try and print a self-test on the printer hardware to see if it is a hardware or software problem.

  Open and close the cover five times quickly. It should print a page with black lines on it.

  You can find the flashing light distribution in this document and the right solutions for the reason that you are experiencing, lights blinking on HP LaserJet P1005, P1006, P1007, P1008 and P1009 Printer Series.

  You use Genuine HP Toner?

  Please let me know the result and if there is anything else I can help you. Thank you.

• HP Officejet 7612 large format: HP7612 will not print after change of router

  I just changed my router a router Orange Virgin

  Wireless printing was good before but now do not print.

  The printer wireless network test results show all works well, but it will not be printed

  All advice welcome

  Reinstall the drivers and full software again.

• Printer does not print after installing new ink cartridges

  I have a Lexmark X 2500 printer. After installing new print cartridges, the printer gives me the error message to order more ink. The printer does not recognize the new ink cartridges that have been installed.  There is a warning on the ink cartridges to do not touch the contacts on the bottom of the cartridges. If this happens, how can I make them work?

  Richard

  You should contact Lexmark as they know their best products and we can onlu support of Microsoft products on this site.

• HP 6520 will not work after changing the black ink cartridges

  Changed the cartridges and now black ink will not work. This is the second or third time only to change the cartridges - did not have a problem before, but of course, it is while the printer was still under warranty. It is now about a year and a half.

  I used all the suggested diagnosis - head cleaned, head aligned, etc, etc, etc, and nothing has helped.

  The black cartridge worked after the swap, but with a few lines do not print or missing--now produces almost nothing.

  Cartridges color was wonderful at the beginning of the troubleshooting process, but now they're starting to not look right - with spare no effort to correct the print head, he seems to be making it worse.

  Suggestions?

  @scrdagain

  I will send you a private message (departure from the envelope at the top on the right)

• HP Envy, printer all-in-one: printer, HP Envy all-in-one will not print after reinstalling instant ink program

  I have two printers, exactly the same thing, 5530 want all-in-one. One is in Arizona where I live part-time and we're in Oregon where I live part-time. I stopped instant Oregon printer ink when I went to AZ last November. I use instant ink program to AZ while there but she stopped this week when I went to Oregon. I tried to restart instantly ink, got an email that it was successful, but can not get all documents to print from laptop to the printer. Yesterday that it said unable to connect to the server and I chatted for two hours with HP on how to solve the problem. It will print the web now compatible congratulations sheet, but if you ask the computer to print, it circles repeatedly and it seems to wake up the printer at all.

  Now:

  1. If the printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click the icon of your Apple system and print and Scan preferences.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the more in the lower left corner.
  2. Select your printer from the list.
  3. In the box titled use select your printer in the list.
  4. If you have an option to choose a name or location for the printer, enter a name such as Oregon. This should help you and your Mac to make the difference between your two printers later.
  5. Click on Add.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• DeskJet 3520: Question of an another DeskJet 3520 print after changing the ink

  Well, I'm another person with a POS deskjet 3520 which ceased print just black ink because I had the audacity to change a new cartridge. I've read at least 4 other threads full of posters with this problem extending over 1 1/2 years. I tried all the 'solutions' that HP experts say to try and not one worked. The printer is 1 month out of warranty now. I tried cleaning the contacts and updated the firmware and bought a second cartridge new, just in case the first was defective. HP really has need of man up and admit they have a problem with this model and fix.

  As it comes a 3520 model, you must call phone HP support, even if it is out of warranty. See the post for more details

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/black-not-printing-on-OfficeJet-4620-Photosmart-6520/m-p/4822686

• OfficeJet 6600: Error general printer after replacing the ink cartridges

  Since the departure of cargtrides of ink is "Printer failure" and "there is a problem with the printer or ink system" and after pressing on "?" shows only "printer General error" without error code.

  I did all the steps he says I (reset the power) but the problem persists. Ink cartridges are new and HP.

  What could be the problem?

  Hi Chris2612,

  Thank you for your answer!

  I would definitely say to change the cartridges, if that does not solve your problem, then please call our hotline to the 800-474-6836 to get help. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

• HELP... z400 will not start after changing the BIOS settings

  Hello

  I went into the BIOS and changed all the PCI slots to include 'calculate' so now it does not recognize video card, now it does not start far from enter the BIOS to undo changes. Ive pulled the battery, reset the CMOS button and jumped the pins CMOS won't default. To b e there is a way to fix it... Please any ideas will be appreciated.

  Hi Glenn,.

  Thanks for posting your query in Microsoft Community.

  Important: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I recommend you contact the manufacturer of the PC for the procedure for making changes in the BIOS.

  Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  Epson Aculaser C 1100 printer does not print after that the text of the error 'install C Tnr basket' black and printer doenst photography black and white or grayscale pages

  the printer is not the shades of grey even print cartridge is not yet empty

  y at - it software for hauler color printing?

  Thanks for your comments

  Hello Nilsvolkel,

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience and time.

  Do not require any special software.

  However, you can use the steps in the following articles and check.
  Reference:
  http://eSupport.Epson-Europe.com/ViewArticle.aspx?LNG=fi-fi&kbid=328037&data=FCFfEfoyEiGLYDIUqzWyE0QE3127X87y&CL=1

  http://Windows.Microsoft.com/en-us/Windows/choosing-print-options#1TC=Windows-7

  Please keep us informed.

  Thank you

• HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page. Can anyone help

  HP Deskjet 1000 printer - just changed the black cartridge for the first time and now it will only print first half of the page.  Can anyone help

  Hello Gloria,.

  I ask you to execute methods in the following link and check if the problem is resolved.

  Solve printer problems

  You can also contact the manufacturer to find out how to clean the print head.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  Please get back to us with the State of the question.