Printhead 7510 gliding is more to the center when I open the printer to change the ink cartridges.

Similar Questions

• Printer says I have ink cartridges in the wrong housing but they are not

  I have a printer HP Photosmart 7510 who keeps saying that I have the cartridge in the wrong slot. All 5 are in the correct locations.

  Take a look on the link following which treats problems ink cartridge.  Click here  You did most of these, but do not yet made steps.  The link suggests you clean the contacts again.  Make sure that the cartridges are level with each other.

  If this does not help, I suggest you do a reset of the ink system.  To do this, remove the printhead and ink cartridges.  See this link.  Close the access of transport cover.  Follow the reset instructions in the following link.  Click here  Once the printer rear lights up and indicates that the print head is missing, reinstall the print head.  Close the access door.  When the printer indicates one or more of the ink cartridges are missing, reposition one of them and close the access door until the cartridge shows.  Repeat the process until all the cartridges are reinstalled.  This aid?

• 7520 new stuck in the installation phase. Print head move load ink cartridges

  I'm stuck in the new phase of printer configuration. After running through the commissioning of questions and I opened the cover to charge the ink cartridges and the print head did not move. I ran across several reset process... Unplug the printer. Wait 60 seconds and plug it in again. Browse the configuration... Unplug the printer... more.

  This printer does not seem to be any cartriages.

  Hey JohnTT,

  Sometimes, these printers come with packaging that holds the printhead completely to the right at the gas station.  This avoids damage to the product during shipping.  You see all plastic parts orange that it may contain in place or Blue Ribbon?

  So, have you tried the carriage to the right hand?  Can it be moved or is it blocked?

  If the printer still will not release the print carriage after the power cycles and move it by hand, then I suggest you return the product and return to the retailer of purchase or by calling the HP Technical Support to see about a replacement.  The phone number for the USA / Canada residents is 1-800-474-6836.  If you are not in this region, click here.

  I hope this helps.

• Cartridge door refuses to move to the ink cartridge replacement position

  Separated from this thread.

  May 22, 2015

  My Epson CX7400 worked beautifully until the beginning of this week.  I tried to install a new ink cartridge.  Pressing the button 'stop' as required, the cartridge door refuses to move to the ink cartridge replacement position.  The assistance Center Epson told me that he seems to be a windows problem and suggested that contact this Web site.  Any Suggestions?

  Hi Sue,

  Thanks for posting your question on the forum of Microsoft.

  The query you have is different from the initial post, this seems to be a hardware problem.

  We can try to start the troubleshooter.

  Run the hardware troubleshooting tool.

  The convenience store is a tool that will check the hardware attached to the computer for all known with him of the issues and provides details and how to fix them. Follow these steps and run the troubleshooter.

  1. Connect the tablet to the computer.
  2. Click on start.
  3. Go in Panel.
  4. Troubleshooting type in the "search" tab and press enter.
  5. Under material and audio.
  6. Click Configure a device.
  7. Follow the instructions on the screen.

  If that's not enough I recommend that you make a diagnosis of equipment by the manufacturer of the printer: Epson Support.

  Let us know if you need more assistance. We will be happy to help you.

  _____________________

  Thank you best regards &,.

  Isha Soni

• How can I change the ink cartridges in a printer f380 all in one?

  I bought this printer with a computer years.  Given that I had a printer I liked, I never hung until recently.  I have no idea what I did with the booklet that comes with it, and now I need to change the ink cartridges.  I don't know how to change them.

  Any help would be greatly appreciated!

  For more information on the change of the cartridges, see the document here .

• "I have a hp officejet 6500 e709 - black ink does not print." I have replaced the ink cartridge...

  "I have a HP Officejet 6500 E709 - black ink does not print." I have replaced the ink cartridge... clean the print heads and contacts... and nothing seems to work. All other colours print fine. HELP ME PLEASE.

  Before you buy a new set of PHA, you could try following the instructions on this post for a more aggressive cleaning Interior http://h30434.www3.hp.com/t5/Other-Printing-Questions/Photosmart-Premium-c309a-Black-prints-out-green-on-photo-paper/m-p/449245/highlight/true#M28673

  Try this first and post back to tell how you got.

• Issue using the ink cartridges.

  I just replaced all my ink cartridges (and now black twice). He did not print documents sent by my iPad or make copies. However, it will display the printer status. I cleaned the print heads. It is then printed out-of-print diagnostic quality showing all my color cartridges are full, but nothing for the black. I clean the printhead three times now and same thing.

  Hello

  Many printers will not print if any of the ink cartridges do not register. If
  You can remove and reinstall the black print cartridge (had to do that to my)
  Printer Brother last night).

  OEM for the printer manufacturer is responsible for the proper functioning of the
  printer and their drivers. Check with their support, their online
  documentation and drivers and ask in their forums (if any).

  =============================================

  The main issue "might" be the engines, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Printer HP Officejet 6100; Win 7; Access the ink cartridges

  Printer HP Officejet 6100; Win 7;  If the ink cartridge access door is opened with the printer, the cartridge printheads do not change access.  No error reported.

  Well, couple of questions:

  First, they move with the door closed while printing, I want to say it actually prints, which would indicate that the transport is not stuck on the side? If it does not move, it may be blocked behind the paper or something inside the printer. It is not recommended to reach into the printer.

  Second, is there an indication (light/message) which shows the door is actually open? Otherwise, there is a tab inside the right side of the door near the label to ink cartridge number? It is located on the edge of the door, and goes into the printer indicating open or closed to the printer.

  If all this seems correct, try a hard reset on the printer. Powered on, unplug the power cord of the printer, wait at least 30 seconds, then plug the power supply cord. Turn on the printer and see if it will allow access to the cartridges.

• new out of the box, all the ink cartridges damaged or missing error 8500

  So, I just got the officejet pro 8500 wireless. follow the instructions in game. at the start he said that ALL the ink cartridges are missing or damaged. I have a hard time believing that, if something is down or I missed something very basic in the installation program.

  I tried to remove the cartridges and re - install. Also checked that they are in the correct order. Don't know what to try next.

  Well he chalked it up to random mishap. I installed the software to see if she said something more useful. not a lot, but he pointed out that he was missing all the cartridges. I went back and exchanged the printer. the replacement is fine.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• HP ENVY 5646: Replacement of the ink cartridges

  Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp.

  I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the printer.

  So - I replaced the color ink cartridge is 'no snapshot' with the color cartridge instant I received a few weeks ago, when I signed up for the instant the ink plan, my question is: should I also replace the ink cartridge 'snapshot not' black now with the black cartridge of instant or wait until it is empty?  Is it true that I should replace the black cartridge and color at the same time whenever one runs out of ink?

  Thank you very much for your reply - much appreciated.

• How do we install the ink cartridge hp officejet pro 8600 Premium?

  Not having is not an easy time to the top of my printer setting.  I don't see where the ink cartridges go.  I opened the front; but I do not see where or how the games of the ink in the printer.  According to me, Miss me something.  Someone can help me.  Thank you

  @LJoR

  Here is a video that will help you with the installation of the cartridges.
  http://goo.GL/zoVsc

• How can I load the ink cartridges

  I have TouchSmart series D110 printer that uses 60 ink cartridges and I have Windows 7 on my computer and I need to know how to load the cartridges!   I can't believe the instructions are not in or on the packaging!  ????????????

  Hello

  It should come with the CD, or you can look at the #19 of this manual page.

  http://h10032.www1.HP.com/CTG/manual/c02106007.PDF

  Kind regards.

• My Epson Stylus 610 says to replace the ink cartridges, but I just put in new cartridges Epson

  My Epson Stylus 610 said to replace the ink cartridges, but I had just put in the new Epson cartridges.

  I have it reset, and I tried to clean up the area, but still the same message and cannot work around.

  My drivers are supposed to be updated.

  I can't print anything.

  [Moved from the community centre of Participation]

  Hello

  Welcome to the Microsoft community.

  What operating system is installed on the computer?

  You may need to check if you have followed the actual procedure to change the ink cartridges.

  Please see the following article:

  https://files.support.Epson.com/htmldocs/sc60__/sc60__rf/ink_1.htm

  https://files.support.Epson.com/htmldocs/pho22_/pho22_rf/ink_1.htm

  Kind regards

• e all in a single photosmart 6520: 6520 implemented of the ink cartridges

  Hello I recently had a new photosmart printer of hp 6520.  However the implementation of the ink cartridges were not in the box.  I was wondering if there was a way around it or if I would be able to get a new set of these cartridges in order to set up the printer so we can use it.   I registered and installed all the software.  the only thing I don't have is the cartridges of configuration to use it.   Thank you for your time

  Hello! Welcome to the @jbuckley21 forums

  I read your post on how your 6520 Photosmart did not include cartridges Setup. In this case, you will need to contact HP for the Setup cartridges sent to you, to install the printer.

  Please, give us a call:

  Call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html