Maximum limit for the type of text in Hyperion Planning 11.1.2.1 data

Similar Questions

• Maximum limit for the number of periods loops that can be run at the same time?

  I am developing a simulator that requires many pieces of code to execute in parallel.  As a result, we were in loops just for this purpose.  I didn't count but there are close to 100 call loops that eventually run at a given time.

  A week ago, I've reached a point where the Simulator was working fine but when I added a more timed loop, it would break LabVIEW.  When I say LabVIEW crashed, I want to say there is no warnings that popped up, and LabVIEW just stopped completely.  Worse still, LabVIEW didn't offer even to recover the work when I start it back up again.  However, removing an additional timed loop allows everyone to work normally again.

  I'm under LabVIEW 2009 Version 9.0f3 (32 bit).  I have observed this behavior even on two different systems, one that is 3.2 GHz Xeon Quad-core with 2.0 GB of RAM, running Windows XP SP3 (32 bit) and the other is a 3.0 GHz AMD Athlon 64 Dual Core with 4.0 GB of RAM, running Windows 7 Professional (64 bit).

  Because the two systems are quite different, and LabVIEW appears to hang at the same point, I wonder if someone has already noticed such behavior.  I searched online and can't seem to find any reference to such a limit on call loops.

  One last thing.  I made an attempt to replace all the loops timed with while loops, but this seems to lead to some kind of hunger because the Simulator becomes suddenly jerky, without seeming to consume all resources more than when the call loops were in place.  So, which doesn't seem to be an option.

  I think that you are limited to 128 Timed loops in a system. Could not find anything by specifying that online, I am sure that I heard him. Also, the Sources Software-Triggered clock Timing loops can only be counted between 0-127.

  However, it certainly sounds like a bug that LabVIEW would crash during the approach of this limit rather than up a significant error.

  You can do some things to help avoid the unstable behaviour of the normal use of many parallels while loops. Place one or more loops in subVIs and then distribute these subVIs enforcement systems . This will give you your application with multiple threads of execution, which will reduce the ground being. If you don't do this, your curls probably all run System Standard of performance, which, by default, cannot have 8 wires at his disposal to share between all the loops.

• validation of maximum size on the element of text box

  Hello
  I couldn't find any station associated with this type of validation. I have a text box on a form. the maximum size of the associated database column is 512 bytes. I need a sort of validation that will tell the user that the maximum size is 512. currently the text box allows the user to write as muc has he wants and throws his mistake if he spends more than 512 bytes.
  
  ORA-20505: DML error: p_rowid = 63, p_alt_rowid = MEMBER_NOTES_ID, p_rowid2 =, p_alt_rowid2 is. ORA-12899: value too large for column 'DW_PROD '. "" "" MEMBER_NOTES '. "" NOTES_TEXT' (real: 1016, maximum: 512) ORA-02063: preceding the line of DATA source
  Error failed to process row in the MEMBER_NOTES table.
  
  None of graceful.
  
  Any thoughts?
  Thank you.

  Hello

  You can use the Type of 'text box with character counter.

  Hope this helps,

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Prefs in user.js for the Mozilla rich text editing has stopped working

  Prefs in user.js for the Mozilla rich text editing has stopped working. He worked, then stopped. you had to do system restore. user.js file replaced, does not work

  This has happened

  Don't know how many times

  solved with this

  https://addons.Mozilla.org/en-us/Firefox/addon/852/

• Maximum RAM for the R31

  Can someone tell me what is the maximum RAM for the R31

  Welcome to the forum!

  Could you please send the model number of 7 characters of your R31?

  Theoretically, 1 GB should be maximally to P3M units, but some Celeron machines have a slot already filled, that is why I ask the model number.

  Good luck and let us know.

• The "64K limit for the total size of all the values in a registry key" rule - not more valid?

  http://support.Microsoft.com/kb/256986
  - more information -> Description of the register article, it is said:

  Note There is a 64K limit for the total size of all values of a key.

  I don't see that this rule can be valid any longer?

  In my Windows 7 SP1 x 64, I have at least 15 keys with values that add up to more than 65 535 bytes.
  In fact, I have more than 15 values (strings, binary and multiple channels) which, by themselves, have some sizes larger than 65 535 bytes.

  Here are a few examples.

  Native Instruments Kontakt 5 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\B354255567BB3E5479D39FE554E87D08\Features]
  -This key contains 91 string values, where 90 are under 250 bytes, but the last of them. "FE923650A" has a length of 67 401 bytes of data.

  Autodesk 3ds Max Design 2011 installation;
  [HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Products\FFECC85A69B39040E99BEA59BF78957B\Features]
  -This key contains 14 values of string, ranging from 1 (the 'P' value) byte to 75 426 bytes (value "max7"), bringing the total size of 116 944 bytes.

  Installation of Windows 7 by default.
  [HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\AppCompatCache]
  -This key contains a binary value of monkey 'AppCompatCache' that has a length of 259 768 bytes of data.

  Another installation of Windows 7 by default;
  [HKLM NT\CurrentVersion\Perflib\CurrentLanguage]
  -This key contains 2 channels multiple values: 'Meter' (87 950 bytes) and 'Help' (418 345 bytes), a total of 506 295 bytes for this key.

  Finally, once again Windows 7 installation by default.
  [HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StartPage2]
  -This key contains 3 DWORD and 5 binary values with the value "ProgramsCache" being the most important of all with its 795 404 bytes
  either a sum of 807 639 bytes for this key.

  Hello

  Check this box:

  http://social.msdn.Microsoft.com/forums/en-us/windowsgeneraldevelopmentissues/thread/84944bfe-4bf5-47cd-93ac-4d09076fcd40

  This problem can also be published on MSDN Forum.

• Security filters for the Types of Plan of ASO in 11.1.2.3

  
  All,

  My understanding of security filters for the Types of Plan of ASO in 11.1.2.3, is that they are not as robust as Types of Plan of traditional BSO are. Is this true? If so, can I restrict access to users who are assigned to the ASO Plan Type to display only and read/write on the private accounts and entities (for example)?

  Thanks in advance.

  The limitation that you refer is a bit confusing.  In summary, the planning will not create Essbase security filters on a data base of the ASO.  However, this does NOT mean that you will not have security on the Type of Plan of ASO.  Instead, it depends on which tool you are using to access the Type of Plan of ASO.

  If you want to connect to the ASO Plan type planning or tool (e.g., EN) with a connection to planning, you'll be fine.  The planning gets its security filters Essbase security information.  It gets its information from the relational repository security.  So the planning and the EN (with a connection to planning) are supported.  Security works as you would expect, even for the Type of Plan of ASO.

  If you want to connect on the type of Plan of ASO with something that requires a * Essbase * (not planning) connection, it only is not supported out-of-the-box, because planning will not create filters on the ASO cube (at least not yet in this version).  However, there is nothing that prevents you from creating filters on your own.  I usually manage all of my safety in an Excel/VBA model that allows me to export/import the Essbase security planning and.  This allows me to apply specific to Essbase filters after a refresh (by importing the custom filters via MaxL).

  So the question is... what tool you will use to access the Type of Plan of ASO?  If you use a connection of planning, you're good.  If you use a connection of Essbase, should be a personalized approach.

  Hope this helps,

  -Jake

• Value to be entered when filling out the metadata for the type of Version in Plannin

  Hello
  I extracted the dimension of the version of my plan.
  Now I need to push planning 11. I reversed the planning 7 dimension by using the dimension of the version to push the value.
  
  After the excerpt, the type of version is UDA as 'Standard bottom-up, Public '. I divided the chain into 2 columns in the version type and others such as the UDA.
  I traced the type column version to the source to version type (in planning) to the target.
  
  The performance of the interface, it generated the following error log:
  
  Final Version, Version, never share, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up.
  REV 1, Version, never share, Release 1, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up
  
  What value must be entered for the type of version?
  
  Furthermore, if there is no doc/pdf that provide details on the different values that can appear in the dimensions of planning, please share.
  
  Thanks in advance
  
  Published by: user8628169 on January 18, 2010 16:40

  Hello

  The value should be 'Bottom Up' or 'Target', have a read here for properties

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• What is the limit for the creation of a primary key?

  Hi friends I have an another question... .Please help me...
  
  
  What is the limit for the creation of a primary key?
  
  
  Thank you

  I think that its 32

  Yes from the doc

  Primary and unique keys because composites are limited to 32 columns, a composite foreign key is also limited to 32 columns.

  Published by: Karthick_Arp on January 13, 2010 22:04

• Casting table PL/SQL for the type of existing table and back ref cursor

  Hello
  
  
  
  I have the problem of casting a pl/sql table for the type of an existing table and turning the ref cursor to the application. Casting a ref cursor back and number of pl/sql table works well.
  
  
  
  Declarant
  
  < strong > TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities >
  
  within the stored procedure, fill in a table of this type temp_table_name and returning the ref cursor help
  
  < strong > results OPEN to SELECT * FROM TABLE (CAST (temp_table_name AS type_table_name)); < facilities >
  
  generates an error. type_table_name is unknown in this distribution. According to me, this happens because of the declaration of the type locally.
  
  
  
  Statement type_table_name inside the package specification does not work neither. Incredible, cast to the said dbms_sql.number_table to specify ref cursor back and dbms_sql package works very well!
  
  
  
  < strong > CREATE TYPE type_table_name IS TABLE OF THE package_name.table_name%ROWTYPE; < facilities > deals without any error but creates an invalid type complain a reference to package_name.table_name
  
  
  
  I don't want to declare every column in the table in type_table_name, because any change the table_name table would result in an inconsistent type_table_name.
  
  
  
  Thanks in advance!
  
  Edited by: user6014545 the 20.10.2008 01:04

  In any case you are right that there is a problem around anchorage (or maintaining) types of objects persistent to match the table structures, they may represent.

  In the case you describe, you might be better off just open the refcursor immediately the using one of the techniques described in the http://www.williamrobertson.net/documents/comma-separated.html to manage the delimited list.

  In the more general case where the line of treatment is necessary, you may make the pipeline functions.

  Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
  
  SQL> CREATE TABLE table_name
    2  AS
    3     SELECT ename column_name
    4     FROM   emps;
  
  Table created.
  
  SQL> CREATE OR REPLACE PACKAGE package_name
    2  AS
    3     TYPE type_name IS TABLE OF table_name%ROWTYPE;
    4
    5     FUNCTION function_name_pipelined (
    6        parameter_name IN VARCHAR2)
    7        RETURN type_name PIPELINED;
    8
    9     FUNCTION function_name_refcursor (
   10        parameter_name IN VARCHAR2)
   11        RETURN sys_refcursor;
   12  END package_name;
   13  /
  
  Package created.
  
  SQL> CREATE OR REPLACE PACKAGE BODY package_name
    2  AS
    3     FUNCTION function_name_pipelined (
    4        parameter_name IN VARCHAR2)
    5        RETURN type_name PIPELINED
    6     IS
    7     BEGIN
    8        FOR record_name IN (
    9           SELECT table_alias.*
   10           FROM   table_name table_alias
   11           WHERE  table_alias.column_name LIKE parameter_name) LOOP
   12
   13           PIPE ROW (record_name);
   14        END LOOP;
   15
   16        RETURN;
   17     END function_name_pipelined;
   18
   19     FUNCTION function_name_refcursor (
   20        parameter_name IN VARCHAR2)
   21        RETURN sys_refcursor
   22     IS
   23        variable_name sys_refcursor;
   24     BEGIN
   25        OPEN variable_name FOR
   26           SELECT table_alias.*
   27           FROM   TABLE (package_name.function_name_pipelined (
   28                     parameter_name)) table_alias;
   29
   30        RETURN variable_name;
   31     END function_name_refcursor;
   32  END package_name;
   33  /
  
  Package body created.
  
  SQL> VARIABLE variable_name REFCURSOR;
  SQL> SET AUTOPRINT ON;
  SQL> BEGIN
    2     :variable_name := package_name.function_name_refcursor ('%A%');
    3  END;
    4  /
  
  PL/SQL procedure successfully completed.
  
  COLUMN_NAME
  -----------
  ALLEN
  WARD
  MARTIN
  BLAKE
  CLARK
  ADAMS
  JAMES
  
  7 rows selected.
  
  SQL> ALTER TABLE table_name ADD (new_column_name VARCHAR2 (1) DEFAULT 'X');
  
  Table altered.
  
  SQL> BEGIN
    2     :variable_name := package_name.function_name_refcursor ('%A%');
    3  END;
    4  /
  
  PL/SQL procedure successfully completed.
  
  COLUMN_NAME NEW_COLUMN_NAME
  ----------- ---------------
  ALLEN       X
  WARD        X
  MARTIN      X
  BLAKE       X
  CLARK       X
  ADAMS       X
  JAMES       X
  
  7 rows selected.
  
  SQL>
  

• What are the benefits for the creative use of cloud photography plan? Can I use license of creative cloud of photography for commercial use in graphic design, such as work in istockphoto and other retail sites, graphics, illustrations, photography?

  Hello

  What are the benefits for the creative use of cloud photography plan? Can I use license of creative cloud of photography for commercial use in graphic design, such as work in istockphoto and other retail sites, graphics, illustrations, photography?

  It is a full commercial license.

  Mylenium

• Error message 404 in the last Calc Manager and Hyperion Planning Logins

  Hi all
  
  When I tried to log into the Manager of Calc and Hyperion Planning (V.11.1.2.2) through the web URL, I get the 404 Error Messages.
  
  If I can get to Calc Manager via the workspace, but when I tried to access Hyperion Planning its launch an Error Msg: required Hyperion Planning.Application Wizard creating applications Module is not configured.
  
  I don't have the Installation/Configuration error.
  
  Any help on this is appreciated.
  
  
  
  
  Thank you
  Mike.

  OK last time :) will check you the newspapers for example \user_projects\\diagnostics\logs\ check the logs in the directory of services for windows and the startup directory for * nix

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• disable the menu version copy in Hyperion Planning

  Dear all,
  
  
  Is it possible to disable the menu version copy in hyperion planning? So that only the administrator who could make the paper version.
  
  
  
  Thanks in advance

  I doubt that this is possible without piracy unless someone else knows different.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Is there a maximum limit for Question pools in the Adobe Captivate 8 SCORM project?

  You want to know if it is necessary to create SCORM content with question pools 27 120 issues all together. Does anyone have idea if there is any limitation in SCORM 1.2 or Captivate?

  I didn't know all the data to indicate the Captivate imposes a limit on the number of pools or the number of questions.  However, SCORM 1.2 has a relatively small allocation of data from resumes and this can sometimes cause problems with big quiz.  But the usual problem that cause relates to bookmarking of the course if the learner should end their attempt to session before completing the module and then later resumed where they had left him.

• Character limit for the entry of short answer?

  Cap 9.

  I use SCORM 1.2, which imposes a limit of 255 characters for the text input, however, I can't find a way to limit the entry of text box for the quiz/short answer, which means that the people of entry much more of 255 characters and submit their responses, but unbeknownst to them, the answer is off.

  Is it possible to apply a limit of characters for pre-built Answer questionnaires/Short models?

  Thank you

  You can limit the number of characters entered in a text entry area.  The maximum number of characters that will now be accepted by a BER 9 Captivate is 150 characters.  But you can set the number being less than that.

  You can certainly include an area for text input in a quiz, but it's usually only when you set the Validation option on WE so that the text of the learner is assessed to see if it matched to a correct answer.  In your case it is not necessary for a correct answer if you want just your comments.  If you do not set a Validation we then report to the Quiz option is gray.

  Developers wishing to receive feedback courses accepted by the LMS often use the value short answer question survey instead of rated.  It seems that some LMS then saves the text entered.

  If it's somewhat a catch-22.  I still believe that your best option is to simply tell users NOT to go more than a few sentences of comments.