Maximum number of SSID on 3500 access point

Similar Questions

• Unique to the multiple SSID and possible access point single channel?

  Hello world.

  I have a silly question.

  Let say, we have three VLAN, vlan1, 2, 3 and they are mapped to the following wireless LANs:

  VLAN 1 ssid1

  VLAN 2 ssid2

  Vlan3 ssid 3

  AP - trunk - dagprogramm network.

  Our access point has mobile devices in three local wireless networks, IE ssid1ssid2 and ssid3

  Since the mode AP use half duplex, mobile devices need acknowledgement positive to ap they can send data, so once channel let channel 3 (assuming that 802. 11b is used) can be shared by all the devices in three local wireless networks.

  My understanding is correct?

  Thanks and a great weekend.

  An access point = an associated action related channel and each ssid and the customer that one channel and the AP is essentially as a hub

  concerning

  Joe

• I need assistance with my WAP54G access point!

  I tried to connect my nintendo dsi to the internet using the WEP encryption, so I went to my router configuration page, then he wasn't no matter what tab wireless or settings on the page... my dsi SYSTEM can go to the internet via the setting of WPA, but my games, which is supported with WEP setting cant. so, I really need someone's help now! I don't want to miss the online features of my games... also, I asked my father if he can help me then he says he can only if I find the CD or download WAP54G ver 3.1 somewhere.

  Thanks in advance...

  If your Access Point is connected to a wired router, so you don't have to change the settings of your router, you just need to enable wireless security and change the SSID of your Access Point, and it should be good to go... Also make sure that your Access Point is in the subnet of your router...

  If the IP address of the router is 192.168.1.1, then the Access Point on your address IP should be 192.168.1.245...

• How can I control the number of clients connecting to one or more access points?

  Hi guys,.

  I am using several access points LWAPP/CAPWAP (1010, 1131, 1142) connected to the 4400 series wlan controllers (OS Version 4.2 and 7.0).

  Regarding the client connection to access points, I have several questions:

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  Best regards

  Thorsten

  Hello

  1. extent to which clients can connect to an access point (maximum possible vs recommended)?

  YEARS-

  Here is the link for possible Maximum...

  http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/
  
  c70ccfg.html#wp1085099
  
  Recommended , Not more than 20 clients per AP.

  2. can I limit the maximum number of clients connecting to the access point in the gui controller? I found how to configure thresholds for sending traps when a number of clients connected to an access point is reached.

  YEARS - here's the software bug that we had raised with the development team of thre...

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtj94508

  Symptom:
  
  There should be a way to limit the number of wireless clients that can associate to a lightweight AP.
  Conditions:
  Workaround:
  
  

  3 How can I balance the number of customers between two adjacent ap, who use the same SSID?

  YEARS - you can configure the feature aggressive load balancing across the WLC, it can help...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• How connect N600 router wndr3400v3 to another hotspot or wifi ssid access point

  I want to connect to my router to an another ot hotspot or access point ssid to increase network range

  I tried but not found any option

  Help, please

  Ok thank you

• LAPN300 - the best configuration for 3 access points, while using the same SSID

  Hi all

  What is the best configuration for 3 x LAPN300 located in various places around my house of 3 floors, access points if I want just one SSID?

  I did some initial research which suggests that I can use the same SSID on all three, as long as they are on different channels. 1, 6 and 11 for example. In theory, then, as I wander around the House the client machine must auto swap to the AP with the signal stronger.

  What do you think? What is the best way or do, or could suggest you something else?

  As an aside... If I decided to create a second SSID for the guests at home, I would also want to add wireless isolation to this SSID. How would that be managing the DHCP server on the local network? How would be asked to connect to the SSID has never get an IP if they have been isolated from other clients on the local network?  Besides, how they see the router? The ANNUAL lets you specify exceptions to this isolation for this feature?  Alternatively, as I suspect, is the right isolation feature isolate them from other WLAN, not the LAN clients customers?

  I did some testing and configuration of the AP with the same SSID and security will do what you want. Don't worry about setting the channel because the auto channel setting works with these devices and automatically adjusts the spacing between the appropriate channels.

  Recommendation of the VPN_user is what you need if you want to isolate the SSID comments from the rest of your network clients.

  Isolation of SSID of the AP will guard only wireless devices to communicate with each other on the same SSID on which it is enabled.

• Unique SSID to the autonomous access point

  Hello

  My question is that if I have one SSID on an autonomous access point while I use the vlan native too. I mean what's the best practice in this case, if the vlan wireless say 10.

  Also I have to use the bvi-1 or I have to creat bvi another for this vlan?

  Thank you

  In my experience it's not a must to use native vlan.

  No, you should use only one interface BVI.

  Just like that:

  Ter of conf
  !
  Dot11 ssid ABC
  VLAN 10
  Open authentication
  Authentication-key wpa version2 management
  WPA - psk ascii cisco123
  Comments-mode
  !
  d0 IND
  SSID ABC
  encryption aes encryption vlan 10
  !
  D1 IND
  SSID ABC
  encryption aes encryption vlan 20
  !
  d0.10 IND
  encapsulation dot1q 10
  !
  D1.10 IND
  encapsulation dot1q 10
  !
  gig0.10 IND
  encapsulation dot1q 10
  !
  int bvi1
  IP address

  Concerning

  Remember messages useful rates

• On remote access points SSID broadcast

  I'm deploying a Uniified Wireless Communication network that spans two location (Head Office and branch) using 1xWLC 4402 and 13 x 1252 APs. Is it possible to configure the access points to the branch to broadcast the ssid, which would not be released on the APs on the WLC seat.

  Thank you

  OLA

  Hi, you could use "overwrite WLAN' to do.

  Here the necessary instructions... to search "To substitute WLAN" in the document to get good paragraph...

  http://www.Cisco.com/en/us/docs/wireless/controller/4.0/Configuration/Guide/c40wlan.html#wp1089232

• installation of switchport lwapp running of multiple ssid access point

  Hi all

  When you set up a hotspot lwapp, must I trunk all the VLANS on the port to the ap? or do I only allow the vlan management for the access point? That is to say 1 vlan and normal access port?

  see you soon

  Carl

  If it's a LWAPP AP, then the switchport should be an ACCESS PORT... It's just to get the IP to the AP, then the AP wil try to join the WLC... once that the AP has joined, the SSID and the rest through the LWAPP tunnel...

  Concerning

  Surendra

• From a few access points SSID

  Hi all

  I'll create a new WLAN id/identifier SSID in Cisco 4402 wireless controller and as soon as I did that create the ssid will be pushed to all access points, but I want to broadcast the SSID that at a few access points, is anyway we achieve this in the controller itself or WCS. Please let me know

  Thank you

  Hello

  Yes, you can shape this traffic. His call to Cisco AP groups. You can simply consult the configuration for confi efforts guide. What is the code, you are on, if you are on 4.2 you can Overide WLAN.

  I hope this helps...

• Connect the question: "you can't access this meeting because you are already attending the maximum number.

  Hello

  Since Monday, we often get the error message "you cannot access this meeting because you are already the maximum number of authorized meetings (2). "Please close one of your meeting rooms, open" when you try to enter in the meeting rooms.

  We checked several times and we * never * have other meeting rooms to open, not even to other accounts.

  We also does not change our subscription or our account.

  We then logout / login several times before we can enter the meeting room.

  It is very annoying, because we use Adobe Connect to give training courses, and teachers can not connect.

  We thought is a temporary problem with Acrobat Connect Pro, but as said, he dwells on since Monday, March 18, 2013.

  Can someone help out us here?

  Thank you

  Jorma Hello,

  Thanks for your reply.

  If it is due to a change of political license by our Adobe reseller application. They were not informed of this change :/

  So nothing to do with Acrobat Connect Pro is.

  All the best

• Maximum number of connections to vCenter Server

  I wonder what experience people is on the threshold for the maximum number of client connections simultaneous vSphere that can connect to a server vCenter Server to access computers virtual virtual guests, using VMware vSphere client without causing performance problems or the server crash.  The simultaneous client connections vSphere how your environments have been able to support?  Of course, there are many variables that are forward-looking statements outlining exact impossible, but illustrative, that's what I'm looking for.  In this case vCenter Server has 8 GB of RAM and 1 GB/s Ethernet.

  Thank you

  Hello

  For vSphere 4.0, the number of concurrent connections to VC is 20 and for vSphere 4.1 is 100.

  Reference:

  http://www.VMware.com/files/PDF/Techpaper/vsp_41_perf_VC_Best_Practices.PDF

  Page 7

  Please consider awarding points.

• TestFlight maximum number of devices

  I just got a new beta to install on TestFlight notification, but when I go to install it I get the message:

  "This app could not installed because you have already saved the maximum number of devices.  You can remove devices in TestFlight parameters. »

  The problem is that when I open the settings/TestFlight, there is no option to add or remove devices, just notice choice and version number.

  Any ideas?

  Walt

  Launch TestFlight and type on the Apple down ID to access the page setting TestFlight.

• Is there a maximum number of family members in sharing the family?

  I have 6 children, 4 of them have iPads and are members of our family share. However, I can't add the latest to get an iPad. The Add button is it in settings > iCloud > family shares but it is grayed out and not the device. I tried my iPhone and my iMac but can't add? Is there a maximum number of members of the family to a family or something else crashes me to add? Thank you in advance for your help!

  See the quote below from http://www.apple.com/icloud/family-sharing/

  Family sharing makes it easy for up to 6 people in your family share of each and other iTunes, iBooks and App Store purchases without sharing accounts. Families with the same credit card purchases and approve kids' expenses directly from the device of a parent. Share photos, a family calendar and more to help keep everyone connected. And with a family membership of Apple's music, up to 6 people can get full access to the Apple's music, too.

• Latest drivers Atheros does not help with hotspot WiFi (or access point)?

  I updated the drivers from v7.7.0.288.0. It's the latest and probably the last pilot found in archive of drivers for the A200 support.

  I set up my WiFi Atheros in usual manner of Vista. The steps are described in most PC portals for the creation of an access point WiFi in Windows Vista.

  1 Control Panel
  2 network connections and sharing
  3. ad-hoc creation, the SSID, password etc.
  4. share the internet connection button.
  5 allow to other users on the network to use my internet
  6 access point is created and Windows indicates that the signal is "Excellent".

  Everything is simple and straightforward but my Android smartphones don't detect access point.
  So what is the fault?

  Driver details dated 03/09/2009 in the Page of Support Toshiba informed that the update of the wireless Lan driver is to 'connect to your wireless access Point or to another PC wireless using your wireless network card.

  [driver | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 8 & selFamily = 192 & selSeries = 236 & selProduct = 725 & STAS hortMod = 518 & language = 13 & selOS = 26 & selType = 97 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 97 & page = 1 & ID = 54134 & DISO = 26 & driverLanguage = 42]

  COMPUTER geeks report that my Atheros AR5007EG is able to create the gateway under Win7. I think in the same way, it should work with Windows Vista SP2.

  http://www.itgeekdiary.com/Windows-7-as-an-Wi-Fi-access-point/

  I tried other portals Windows but all of them describe the same steps by creating ad hoc to access Windows Vista point.

  Any help is appreciated.

  Kind regards.

  Thanks for the comments!