MDCT - problem installing sample report - runs too long but no progress

Similar Questions

• E420S fan running too long

  Hello

  I have a question about my Thinkpad Edge E420S (4401-29U; BIOS version 1.36).

  The problem is: once the fan turns on, it stays on for an unnecessarily long time, even with low cpu load. (A similar problem is described here.)

  The system is idling around 45-50 ° C. Once it hits around 55-60 ° C or more, fan comes into action and quickly lowers temperature back to 45-50... and then the fan remains on for 20-30 minutes.

  My first guess is that it is a BIOS problem, because:

  * the problem seems to be not high temperatures, but rather the fan who does not turn off the power as soon as the set temperature is reached.

  * I was not able to control the fan through the operating system, Windows 7 (using programs such as tpfancontrol) or Debian Linux (using the thinkpad-acpi kernel module).

  However, many critics of the e420s mentions silent operation, so maybe I'm wrong...

  Am I right in thinking that sounds like a BIOS problem, or maybe a hardware problem? Anyone here know if it is a complaint often and if so, if there is a new BIOS update in the pipeline?

  Thanks a lot for your help.

  Hi djunkmayl,

  You are already on the latest version of the BIOS and there is no direct definition for on BIOS CPU fan speed. But if you have installed Power Manager, then you can try "Cooling system policy" in the field "advance settings". If the problem persists, please contact local lenovo to test hardware.

  Fred

• query running too long on a partitioned table

  Hello
  I try to run the following query on a table of line 73 million, but the application continues running and works without any results back within a reasonable time.
  
  Select *.
  of svcdepot.service_log l
  where dbms_lob.instr (l.service_log, 'SALESFORCE_ROLE_CREATED') > 0 and rownum < 2
  and create_date > sysdate-.1
  
  This table has a normal index on the create_date table and is also divided on create_date. Partition names as PARTITION20120316 and PARTITION20120311. It shows values lower than TIMESTAMP' 2012 - 03 - 16 00:00:00 'and TIMESTAMP' 2012-03-11 00:00:00 ', respectively. Is could someone please tell me how I can change the query so that it does not forever? He seems to fight the create_date column (while I was troubleshooting). I just need one record with this SALESFORCE_ROLE_CREATED text in this clob column.
  
  Thank you!

  Hello

  It would be helpful if you mentioned the name of the partition in the query. For example, for superior to sysdate create_date-. 1, you don't need to go through the full table and only the partition created for today would be sufficiient.
  for example
  Select *.
  svcdepot.service_log PARTITION (PARTITION20120312) l
  where dbms_lob.instr (l.service_log, 'SALESFORCE_ROLE_CREATED') > 0 and rownum<>
  and create_date > sysdate-.1
  If you use this query in PL/SQL program, you will need to create this dynamic partition name and dynamic SQL can be used.

• Query takes too long, but the cost is low

  Hi guys,.
  
  I run a query on two databases that were created in the same way and have the same data.
  
  On one, the cost is almost 1 million, and it runs in the space of a few seconds
  On the other hand, the cost is 40,000, and it does not end execution
  
  I looked at the plan to explain it and there is no Cartesian merge on the second query join, but it takes so long. What can I do to study this?
  
  Thank you

  The sqlxtplan provides comprehensive information on the query that was executed, or running, depending on the mode you choose. It has all the information of dbms_xplan plus much more. for example all the table definitions used in the query, filters of predicate query, plans for execution, his stats of all tables, indexes, etc... used in the query.
  I find the way the fastest to get an overview of how the optimizer made its decision. If it is running run mode, it, rather than using the id of sql or hash, it also gives a 10053 trace.

• Statement Update takes too long to run

  Hi all
  
  I am trying to run this update statement. But its takes too long to run.
  

      UPDATE ops_forecast_extract b SET position_id = (SELECT a.row_id
          FROM s_postn a
          WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME)))
          WHERE position_level = 7
          AND b.am_id IS NULL;

          SELECT COUNT(*) FROM S_POSTN; 
          214665

          SELECT COUNT(*) FROM ops_forecast_extract;
          49366

  SELECT count(*)
          FROM s_postn a, ops_forecast_extract b
          WHERE UPPER(a.desc_text) = UPPER(TRIM(B.POSITION_NAME));
   575

  What could be the reason for the update statement to run so long?
  Thank you

  polasa wrote:
  Hi all

  I am trying to run this update statement. But its takes too long to run.

  What could be the reason for the update statement to run so long?

  You did not say what means "too long", but a simple and good reason might be that the scalar subquery on "s_postn" using a full table for each run scan. Potentially this subquery is executed for each row of the table "ops_forecast_extract" that satisfies your filter predicates. 'Potentially' due to "filter/subquery optimization" cunning of the Oracle execution engine that tries to cache results of already executed of instances of subquery. Given that the in-memory hash table that contains these cached results is limited in size, the optimization algorithm depends on the sort order of data and could suffer collisions of hash that it is unpredictable, how this optimization works in your particular case.

  You can view the execution plan, it should at least tell you how Oracle will run the scalar subquery (that tell you nothing about this "filter/subquery optimization" feature).

  Follow the generic guidelines how to generate a useful plan explain output and how to post here:

  Could please post a correctly formatted explain you plan output using DBMS_XPLAN. SCREEN, including the 'Predicate information' section below the plan to provide more details about your statement. Please use the noformat} [{noformat} code {noformat}] {noformat} before tag and {noformat} [{noformat} / code {noformat}] {noformat} tag or after the noformat} {{noformat} code {noformat}} {noformat} tag before and after to improve the readability of the outing:

  In SQL * more:

  SET LINESIZE 130
  
  EXPLAIN PLAN FOR ;
  
  SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);
  

  Note that the DBMS_XPLAN package. DISPLAY is only available from 9i on.

  In 9i and above, if "Predicate information" section is missing from the DBMS_XPLAN. Output display, but you get the message "Plan table is old version" instead, you must recreate your plan table using the script server '$ORACLE_HOME/rdbms/admin/utlxplan.sql '.

  In previous versions, you can run the following in SQL * Plus (on the server) instead:

  @?/rdbms/admin/utlxpls
  

  A different approach in SQL * more:

  SET AUTOTRACE ON EXPLAIN
  
  ;
  

  also displays the execution plan.

  In order to get a better understanding where your statement passes the time, you might want to turn on SQL tracing as described here:

  When your query takes too long...

  and after the "tkprof' out here, too.

  Kind regards
  Randolf

  Oracle related blog stuff:
  http://Oracle-Randolf.blogspot.com/

  SQLTools ++ for Oracle (Open source Oracle GUI for Windows):
  http://www.sqltools-plusplus.org:7676 /.
  http://sourceforge.NET/projects/SQLT-pp/

• For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported

  For Windows XP (KB2719985) security update will not be installed. The text "a problem on your computer is preventing the updates being downloaded or installed" is reported. Fix - it crashes too much with the line "invalid command line" when I try to run it.

  Hello

  1. this problem occurs only with this particular update?

  2 did you change on your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can reset the Windows Update components.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 2

  You can read the article.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  Method 3

  Step 1:

  Place the computer in a clean boot state.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. click Startand then click run.

  b. type msconfigand click OK.
  The System Configuration utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and servicesand then click OK.

  When you are prompted, click restart to restart the computer.

  
  Step 2:

  Download and install the update from the link.

  Update security for Windows XP (KB2719985)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30282

  See also:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602

• HP LaserJet 1536dnf MFP - installation took too long to run.

  Try installing a laserjet MFP M125a pro on a computer running windows 10.  Get "use installation was taking too long to execute.  This is a fatal error. "I reinstalled the driver software hp, the most recent assistance from the Download Center.  I made sure to print spooler tye is in automatic mode, according to the following link:

  http://support.HP.com/us-en/product/HP-LaserJet-M1530-multifunction-printer-series/3974271/model/397...

  No luck.  Still will not install.

  Hi samshube,

  Please, try the steps in the following order:

  • Uninstall the software. Uninstalling the printer software.
  • Unplug the printer USB cable.
  • Clean boot the computer. How to perform a boot in Windows.
  • Disable all Antivirus programs. Disable Antivirus software.
  • Disable all firewall programs. The WF of end-to-end.
  • Create a new user account. Management of user accounts and connections (Windows 10).
  • Reinstall using HP LaserJet Pro MFP M125/126 series full software and drivers. (Expect that the software will ask you to connect the printer USB cable.)

  Run the HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope these steps help!

• Your history file drive has been disconnected for too long. Pour garder keep save copies of your files, reconnect your player, then run a backup.

  Original title: plug your drive (Important)

  Reconnect your player (Important)

  Your history file drive has been disconnected for too long.

  To keep save copies of your files,.

  Reconnect your player, then run a backup.

  Recently installed window 8.

  Upgrade Windows 7 clean boot.

  Inspiron 580 s 1 TB

  Windows 8.1

  After TWO YEARS, someone should be able to give us a step by step, to "reconnect" an external, USB hard drive!  I unplugged and then plugged it, several times, without success.  I seem to have this problem with one of my disks USB, a Toshiba.  Access the drive through files Explorerer, seems to work, even if it is "disconnected". Historical files only has problems. Strange! Could it be the drive itself, or it is plugged in to the USB port?

  I had the same issue this morning and found a solution that worked for me.

  This post helped: Windows - historic community of 8 files windows does not recognize my drive hard iomega

  NOTE:

  -make a backup copy of the files you delete first! (just in case)

  -J' had deleted my old historical records from the files on the ext. HDD, so I lost no data. I can't guarantee that the ancient history of the file will be there if you remove the configuration files, as described below. In my opinion, it shouldn't happen, but since I have not tried, I can't guarantee that.

  After checking my disk for drive errors (none) and update the drivers (not not mandatory), I went to this location of records:

  C:\Users\your user folder\AppData\Local\Microsoft\Windows\FileHistory\Configuration

  and remove the four files that were on it. Because they determine the configuration of the file history, when I ran the service once again, I could set up my drive as if it had never been used before. I started historic files, and it lets me choose my hard drive and run the backup as it should.

• Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But i

  Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.

  If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.

  As a fundamental step. Leave the creative Cloud desktop application.

  Delete the contents of the Temp folder:

  Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.

  Please press Windows + R and you will get a command window run, get hit and type %temp%.

  Delete all the content inside the temp folder.

  
  

  
  Then try again to install application InDesign CC again.

  Just in case, if you are still having the same issue.

  Creative application cloud thus released, do not close it.

  Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.

  Then leave Creative Cloud application and try to install.

• Cannot decompress web complete sample application catalog because too long file name.

  I have OBIEE 11.1.1.5 installed on a Windows 2003 SP2 environment, which installs SampleAppLite. I wanted to install the sample full application I downloaded Oracle. When I tried to unzip the provided catalog with the complete sample application file, I received errors of WinZip. I have determined that the cause of the errors is a too long file name. The length of the path and file name exceeds the limit of 255 characters in windows.
  
  Anyone else tried the complete sample application on windows?

  Karen,

  This can happen for SampleApp as well as for the installation of Oracle BI Apps on Windows due to a setting of configuration and limitation of Windows.

  My opinion is that the Oracle BI PM team really built OBIEE 11 g Linux first and then Windows is a minor version.

  However, to solve your problem, configure your environment as if it'll be a deployment locally to bracts and create a shared near the root folder. Then the em Console merger change the RPD deployment tab to a location 'sharing' and also to adjust the assignment of web site catalogue.

  Thus, for example, on your C:\ drive create the following structure

  C:\
  -OBIEEShare
  -THE RPD
  WebCat-
  -GlobalCache

  Then do C:\OBIEEShare a shared folder so that it can be accessed through the following UNC, \\machineName\OBIEEShare\

  Place the SampleApp DPR on the course of \\machineName\OBIEEShare\RPD\
  Place the SampleApp WebCat folder on the \\machineName\OBIEEShare\WebCat\ course

  Now in do it Fusion Console EM the shared location for the RPD is \\machineName\OBIEEShare\RPD\ and the location of the web catalog is \\machineName\OBIEEShare\WebCat\SampleApp

  Transfer your file SampleApp.rpd and enter the correct credentials.

  Restart the necessary components and you're done.

  See you soon,.
  Christian
  http://www.artofbi.com

• installation took too long to run

  * HP LASERJET 100 m175nw

  * Windows XP

  Installing surgery took too long to run. It is a fatal error, preventing the use of the product.

  * No changes made, the product is installed for the first time.

  Hi JMMT23,

  Are using the installation option chip by plugging the USB cable to begin the installation or CD?

  Install the software with HP Smart Install

  1. Press the power button ( ) or switch to turn off the product, if it is already disabled.

• Hello, I have problems with my mac. Sometimes, it becomes very slow and even if frozen and taking too long to respond.

  EtreCheck make a diagnosis and threw the report that describe below, but do not know how to interpret and solve the problem. Can someone help me.

  EtreCheck version: 2.7.7 (237)

  Report generated 2016-01-22 08:51:47

  Download EtreCheck from http://etrecheck.com

  Time 04:21

  Performance: good

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click [delete] to remove the adware.

  Click on the link [check files] help with unknown files.

  Verify the signatures of Apple: enabled

  Problem: Computer is too slow

  Hardware Information: ⓘ

  iMac (21.5 inch, mid 2011)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac12, 1

  1 2.7 GHz Intel Core i5 CPU: 4 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1333 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1333 MHz

  0/DIMM1 BANK

  Vacuum

  BANK 1/DIMM1

  Vacuum

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Video information: ⓘ

  AMD Radeon HD 6770M - VRAM: 512 MB

  iMac, 1920 x 1080

  Software: ⓘ

  OS X El Capitan 10.11.2 15 c (50) - time since started: about one day

  Disc information: ⓘ

  ST31000528AS disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  Macintosh HD (disk0s2) /: 999,35 go-go (418,75 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  OPTIARC DVD RW AD - 5690H)

  USB information: ⓘ

  Apple Inc. FaceTime HD camera (built-in)

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Card reader Apple

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Adware: ⓘ

  /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client

  /System/Library/frameworks/VSearch.framework

  2 adware files found. [Remove]

  Unknown files: ⓘ

  /Library/LaunchDaemons/com.Mousebird.NET-preferences.plist

  /Library/LaunchDaemons/com.weaserUpd.plist

  /Library/LaunchDaemons/com.prudentialist.NET-preferences.plist

  /Library/LaunchDaemons/com.corvinaUpd.plist

  4 unknown files found. [Check files]

  Launch system officers: ⓘ

  com.apple.CallHistoryPluginHelper.plist [killed]

  com.apple.CallHistorySyncHelper.plist [killed]

  com.apple.FolderActionsDispatcher.plist [killed]

  com.apple.SafariCloudHistoryPushAgent.plist [killed]

  com.apple.SafariPlugInUpdateNotifier.plist [killed]

  com.Apple.CDPD.plist [killed]

  com.Apple.cmfsyncagent.plist [killed]

  com.Apple.CoreServices.appleid.authentication.plist [killed]

  com.Apple.followupd.plist [killed]

  com.Apple.gamed.plist [killed]

  com.Apple.icloud.fmfd.plist [killed]

  com.Apple.printtool.agent.plist [killed]

  com.Apple.recentsd.plist [killed]

  com.Apple.reversetemplated.plist [killed]

  com.apple.spotlight.IndexAgent.plist [killed]

  com.Apple.telephonyutilities.callservicesd.plist [killed]

  16 killed processes lack of RAM

  Launch system demons: ⓘ

  com.Apple.audio.systemsoundserverd.plist [killed]

  com.Apple.awdd.plist [killed]

  com.Apple.icloud.findmydeviced.plist [killed]

  com.Apple.ifdreader.plist [killed]

  [killed] com.apple.periodic - daily.plist

  com.Apple.softwareupdate_download_service.plist [killed]

  com.Apple.system_installd.plist [killed]

  com.Apple.tccd.System.plist [killed]

  com.Apple.wdhelper.plist [killed]

  com.Apple.XPC.SMD.plist [killed]

  10 killed process lack of RAM

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.oracle.java.Java - Updater.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [loading] com.corvinaUpd.plist [Support]

  [loading] com.google.keystone.daemon.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.mousebird .net - preferences.plist [Support]

  [loading] com.oracle.java.Helper - Tool.plist [Support]

  [operation] com.prudentialist .net - preferences.plist [Support]

  [loading] com.weaserUpd.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist -/System/Library/Frameworks/CoreServices.framework/Frameworks/OSServices.framewo rk/Versions/A/support/CSConfigDotMacCert: Executable not found!

  Items in user login: ⓘ

  iTunesHelper hidden application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Google + Auto Backup UNKNOWN (missing value)

  Application of Google Reader (Google Drive.app/Applications /)

  Other applications: ⓘ

  [operation] com.adobe.PDApp.AAMUpdatesNotifier.80032.97923F0D-C3D9-4272-9E58-6DED4EB630B3

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000a.EtreCheck

  [ongoing] com.getdropbox.dropbox.19232

  Plug-ins Internet: ⓘ

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  Default browser: Version: 601 - SDK 10.11

  AdobePDFViewerNPAPI: Version: 10.1.16 [Support]

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  Silverlight: Version: 5.1.40728.0 - SDK 10.6 [Support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [Support]

  SharePointBrowserPlugin: Version: 14.6.0 - SDK 10.6 [Support]

  AdobePDFViewer: Version: 10.1.16 [Support]

  SquareClock_Production_HBMV1: Version: 3a3ca28001d075bf

  JavaAppletPlugin: Version: 8 Java 66 update build 17 check version

  User Plug-ins internet: ⓘ

  ClientManager64_0.33: Version: 0.33 [Support]

  WebEx64: Version: 1.0 - SDK 10.6 [Support]

  Safari extensions: ⓘ

  Zotero connector

  3rd party preference panes: ⓘ

  Flash Player [Support]

  Java [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 999,35 GB disc used: 580,60 GB

  Destinations:

  Lalo [network]

  Total size: TB 3.00

  Total number of backups: 42

  An older backup: 22/12/15 05:39

  Last backup: 22/01/16-08:39

  Size of backup drive: Excellent

  Backup TB 3.00 size > (disk size 999,35 GB X 3)

  Top of page process CPU: ⓘ

  kernel_task 2%

  2% WindowServer

  1% mds_stores

  0% fontd

  0% dock

  Top of page process of memory: ⓘ

  1.23 GB com.apple.WebKit.WebContent (4)

  546 MB kernel_task

  Safari 98 MB

  Mdworker (7) 86 MB

  Com.apple.WebKit.Plugin.64 61 MB

  Virtual memory information: ⓘ

  79 MB free RAM

  3.92 GB used RAM (698 MB cache)

  182 MB used Swap

  Diagnostic information: ⓘ

  January 21, 2016, 22:37:54 ~/Library/Logs/DiagnosticReports/Google Drive_2016-01-21-223754_ [redacted] .crash

  / Applications/Google Drive.app/Contents/MacOS/Google Drive

  January 21, 2016, 22:34:45 ~/Library/Logs/DiagnosticReports/Photos_2016-01-21-223445_[redacted].crash

  /Applications/photos.app/Contents/MacOS/photos

  January 21, 2016, 10:59:53 ~/Library/Logs/DiagnosticReports/FinderSyncAPIExtension_2016-01-21-105953_[reda DECT] .crash

  com.google.GoogleDrive.FinderSyncAPIExtension - Applications/Google Drive.app/Contents/PlugIns/FinderSyncAPIExtension.appex/Contents/MacOS/FinderSy ncAPIExtension

  20 January 2016, 18:50:08 self-test - spent

  Don't panic.

  You are strongly infected by adware, but the cure is simple and fast:

  Download Malwarebytes anti-malware from https://www.malwarebytes.org/antimalware/mac/

  Then run it: it will remove the adware infections.

  Lex

• I too have a problem installing windows error1601. I went through the steps to get services and found that this installer of windows is gone. How can I get that back?

  I too have a problem installing windows error1601.  I went through the steps to get services and found that this installer of windows is gone.  How can I get that back?

  Try to run the Windows Installer Cleanup http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml utility to see if that solves the problems with windows install.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem too Long way destination - Item not found to rename folders

  I searched an answer in the world to this question and it seems that none of the '' correction '' that people have had success with worked for me, so I write my own question in the hope that someone can help me, and in turn anyone who stumbles on this problem will find this thread and be helped as well.

  My OS is Windows 7 Home Premium SP1

  Here's the problem:
  For a few months now, I was not able to make a new folder and rename it with windows Explorer (I have to go to the command prompt and do it this way)
  It gave me errors "Destination path too Long", despite the path doesn't exceed NOT the limit of 260 characters. Even if I rename the folder '1' or 'a' it gives the error. I have files that were created before the problem that are fine, but they can't really be renamed with windows Explorer.

  It also gives me the 'path of destination too long' error when you move files in other folders, thus making the Organization of difficult cases.

  I tried to uninstall the update "kb980408" as other threads have said... and it did nothing for me. I tried to delete the reg files as indicated on multiple threads to try to solve the problem that some people had success with... I have not the case.

  I ran chkdsk, several malware scans and viruses which did nothing.

  I had not initially installed SP1, so I tried to see if it changed anything. He did. Instead of the "destination path too long" error, I then go "object not found" when you try to rename a file or move a folder to another folder. If I hit "try again" on this box, then it would actually rename the folder or move the folder successfully. Well, not being able to live with the stupid error that appears when I want to simply create and rename a folder, I searched for a way to get rid of THIS problem that brought me to remove these registry keys once more. After reboot, back to the error "destination path too long" and not rename/move the files once more.

  Anyone had any experience with this problem and you can guide me in a solution that does not involve a clean install?

  Hello

  Read the following article, it helped me to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/destination-path-too-long/7ff8d0d0-84F3-4d13-B2FD-f742a38731c5

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/c6bf8dad-eb04-4818-Ab19-6c46854dd146

  http://www.bryantwebconsulting.com/blog/index.cfm/2012/1/19/getting-around-Windows-7-destination-path-too-long-error-when-deleting-files

  http://forums.techguy.org/Windows-7/911476-solved-destination-path-too-long.html

  Make sure you try all the steps.

• error "result of concatenating string is too long" when I try to run the following code. Help me!

  When I try to perform the following PROCEDURE, he throws me an error:

  Error from line: 2 in command.

  BEGIN

  FACT_UPDATE;

  END;

  Error report-

  ORA-01489: result of concatenating string is too long

  ORA-06512: at "AFLOBIDW. FACT_UPDATE', line 22

  ORA-06512: at line 2

  01489 00000 - "result of concatenating string is too long."

  * Cause: Result of concatenation of string exceeds the maximum size.

  * Action: Make sure that the result is less than the maximum size.

  ---------------------------------------------------------------------------

  I can't change the logic of the code since I'm trying to do Informatica at the back done and compare performance between Informatica and Oracle DB. Is there another solution for errors? I add only the SQL query that is part of the PROCEDURE for easy viewing. Please help me. Thank you!

  SELECT "UPDATE XXAFL_MON_FACTS_F SET TASK_WID ='"

  || NVL (TO_CHAR (TASK_WID), 'NULL')

  |', EXECUTION_PLAN_WID ='

  || NVL (TO_CHAR (EXECUTION_PLAN_WID), 'NULL')

  || ', DETAILS_WID ='

  || NVL (TO_CHAR (DETAILS_WID), 'NULL')

  |', SOURCE_WID ='

  || NVL (TO_CHAR (SOURCE_WID), 'NULL')

  |', TARGET_WID = '

  || NVL (TO_CHAR (TARGET_WID), 'NULL')

  || ', RUN_STATUS_WID ='

  || NVL (TO_CHAR (RUN_STATUS_WID), 'NULL')

  |', SEQ_NUM ='

  || NVL (TO_CHAR (SEQ_NUM), 'NULL')

  |', NAME = "'

  || NVL (TO_CHAR (NAME), 'NULL')

  || ' ', NO_POSITION = "'

  || NVL (TO_CHAR (INSTANCE_NUM), 'NULL')

  ||'' ', INSTANCE_NAME = "'

  || NVL (TO_CHAR (INSTANCE_NAME), 'NULL')

  || ' ', TYPE_CD = "'

  || NVL (TO_CHAR (TYPE_CD), 'NULL')

  ||'' ', STATUS_CD = "'

  || NVL (TO_CHAR (STATUS_CD), 'NULL')

  ||'' ', START_TS ='

  || DECODE (START_TS, ",' to_date(''e))

  || To_char (START_TS, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  || ', END_TS ='

  || DECODE (END_TS, ",' to_date(''e))

  || To_char (END_TS, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', DURATION = '

  || NVL (TO_CHAR (DURATION), 'NULL')

  |', STATUS_DESC = "'

  || NVL (TO_CHAR (STATUS_DESC), 'NULL')

  || ' ', DBCONN_NAME = "'

  || NVL (TO_CHAR (DBCONN_NAME), 'NULL')

  ||'' ', SUCESS_ROWS ='

  || NVL (TO_CHAR (SUCESS_ROWS), 'NULL')

  || ', FAILED_ROWS ='

  || NVL (TO_CHAR (FAILED_ROWS), 'NULL')

  |', ERROR_CODE = '

  || NVL (TO_CHAR (ERROR_CODE), 'NULL')

  |', NUM_RETRIES ='

  || NVL (TO_CHAR (NUM_RETRIES), 'NULL')

  || ', READ_THRUPUT ='

  || NVL (TO_CHAR (READ_THRUPUT), 'NULL')

  |', LAST_UPD = '

  || DECODE (LAST_UPD, ",' to_date(''e))

  || To_char (LAST_UPD, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', RUN_STEP_WID = "'

  || NVL (TO_CHAR (RUN_STEP_WID), 'NULL')

  || ' ', W_INSERT_DT = '

  || DECODE (W_INSERT_DT, ",' to_date(''e))

  || To_char (W_INSERT_DT, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  |', W_UPDATE_DT = '

  || DECODE (W_UPDATE_DT, ",' to_date(''e))

  || To_char (W_UPDATE_DT, "mm/dd/yyyy hh)

  ||'' ((', "dd/mm/yyyy hh")')

  || ', START_DATE_WID ='

  || NVL (TO_CHAR (START_DATE_WID), 'NULL')

  |', END_DATE_WID = '

  || NVL (TO_CHAR (END_DATE_WID), 'NULL')

  |', START_TIME ='

  || NVL (TO_CHAR (START_TIME), 'NULL')

  |', END_TIME ='

  || NVL (TO_CHAR (END_TIME), 'NULL')

  ||' WHERE INTEGRATION_ID = "'

  || INTEGRATION_ID

  ||''';' AS Column

  OF XXAFL_MON_FACTS_F;

  Hello

  ORA-01489 is one of these error messages that really means what he says. The error message you posted pretty much sums up the situation.

  What version of Oracle are you using?  (You must still include this whenever you have a question.  See the FAQ forum: Re: 2. How can I ask a question on the forums? )

  From 12.1 of the Oracle, there is an option to allow VARCHAR2s in SQL to be as big as 32767octets.  (The default is 4000).

  Otherwise, if you can't change the code, either do not run. or ensure that the concerned channels are quite short so the error does not occur.