Measurement Studio 2014 and VS 2013. ?

Similar Questions

• Measurement Studio 2015 lack of reference to Assembly for "NumericControlCommands."

  I just migrated my project Studio 2012 measurement to Measurement Studio 2015 and udpated VS2013 references.  I get the following error in my XAML

  Type reference cannot find the named type ' {http://schemas.ni.com/controls/2009/xaml/presentation/primitives} NumericControlCommands'.

  It turns out that it was an indirect exception related to a few of my files that I still need to change "NumericControlCommands" to "ControlCommands".  The project seems to work fine now.

  Thank you

• Error of measurement Studio 2010 FxCop: location of Assembly reference OR

  Hello

  Please look at the snapshot attached for more details.  Basically, I have a project of Measurement Studio update, and I'm running FxCop on the compiled dll.  FxCop is looking for an older version of the NI.Common.dll that is referenced by OR. DAQmx.dll.

  Current versions of DLLs OR on the system:

  NationalInstruments.Common.dll - 9.0.35.362

  NationalInstruments.DAQmx.dll - 9.1.35.15

  Version of FxCop is looking for referenced by NationalInstruments.DAQmx - 8.9.35.302

  Any help would be appreciated!

  Thank you!

  -J

  Long story short, I advanced and uninstalled everything related to OR through the MsiBlast tool that I found on a different thread.  It turns out that some drivers were looking uninstall .msi files on a network drive that have since been moved to a different location.  Currently waiting for resettlement of Measurement Studio and I hope it will solve all my problems.  So I guess I'll consider cela a closed thread for now.  Thanks for all the help!

• is the XBR-65X850A a model 2013 or 2014 and it will support netflix 4 k?

  I was wondering if the XBR-65X850A is a model 2013 or 2014 and it will support netflix 4 k?

  Hi kevinrocksman!

• Siemens simatic wincc SCADA and LabView/Measurement Studio

  Hi all

  I am currently working on the design of wireless data acquisition system using materials. Input signals captured by wirelessDAQ NOR will appear eventually in WinCC from Siemens SCADA system.

  Is there a way to make this configuration? I thought to is to develop software for the acquisition of data using LabView/Measurement Studio and link code to WinCC via Visual Basic (for example via DAQmx). Thanks for all your comments.

  Hi kid_26,

  I'm sorry.

  It is the only option.

  If you press the cost, write a VB6 to call DAQmx is an option.

  Sincerely, Kate

• License with Measurement Studio and Visual Basic 2008 Express problem

  Hello!

  I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008.

  I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized."}

  Does anyone have an idea?

  Thanks in advance!

  Andreas

  Here is the full error message:

  System.TypeInitializationException wurde nicht Festival.
  Message = "Der Typeninitialisierer as 'NationalInstruments.Analysis.Dsp.Transforms' hat eine exception caused."
  Source = "NationalInstruments.Analysis.Professional"
  TypeName = "NationalInstruments.Analysis.Dsp.Transforms"
  StackTrace:
  BEI NationalInstruments.Analysis.Dsp.Transforms.RealFft (Double [] realData)
  EIB LDS. LDS_Form1.ButtonFFT_Click (Object sender, EventArgs e) D:\devel\LDS\pc\LDS\LDS\LDS_Form1.vb:Zeile 1700.
  bei System.Windows.Forms.Control.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  EIB System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  EIB System.Windows.Forms.Control.WndProc (Message & m)
  bei System.Windows.Forms.ButtonBase.WndProc (Message & m)
  bei System.Windows.Forms.Button.WndProc (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  bei System.Windows.Forms.NativeWindow.DebuggableCallback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
  bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
  bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
  EIB System.Windows.Forms.Application.Run (ApplicationContext context)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (String [] command-line)
  EIB LDS. My.MyApplication.Main (String [] Args) in 17d14f5c-a337-4978-8281 - 53493378c1071.vb:Zeile 81.
  bei System.AppDomain._nExecuteAssembly (Assembly, String [] args)
  bei System.AppDomain.nExecuteAssembly (Assembly, String [] args)
  bei System.Runtime.Hosting.ManifestRunner.Run (Boolean checkAptModel)
  bei System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext, String [] activationCustomData)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext)
  EIB System.Activator.CreateInstance (ActivationContext activationContext)
  BEI Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone)
  bei System.Threading.ThreadHelper.ThreadStart_Context (Object state)
  bei System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  bei System.Threading.ThreadHelper.ThreadStart)
  InnerException: System.ComponentModel.LicenseException
  Message = "NationalInstruments.Restricted.AnalysisLicenser is unlicensed."
  Source = "NationalInstruments.Common"
  StackTrace:
  AT NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)
  BEI NationalInstruments.Restricted.LicenseBase.a (String Type A_0, A_1, A_2 object)
  BEI NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)
  AT NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)
  BEI NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)
  bei System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, Object instance, Boolean allowExceptions, license, licenseKey, String & license)
  bei System.ComponentModel.LicenseManager.ValidateInternal (Type type, Object instance, Boolean allowExceptions, license & license)
  bei System.ComponentModel.LicenseManager.Validate (Type type, object instance)
  EIB NationalInstruments.Restricted.AnalysisLicenser... ctor()
  EIB NationalInstruments.Analysis.Dsp.Transforms... cctor()
  InnerException:

  Hi Andreas,

  It is scheduled for any Visual Studio Express edition, because these editions do not allow 3rd party integration. So, you will need to perform some additional steps to get a license to work properly.  Refer to the Measurement Studio for Visual Studio Express Editions support KB (in particular, paragraph 2 pointing you to our help).

  Best regards

• NI5105 digitizer and Measurement Studio 2010

  Hi I'm new here. I have a problem that needs your help.

  My company just bought a PCI-5101 digitizer of NOR, we want to continually read an output signal of all 8 channels of this device for our project.

  Our project is under Microsoft VS 2010 and .net Framework 4. But I understand that your only support .net NI Scope libraries Microsoft VS 2008, .net 3.5 Frame.

  My question is: what should I do? Can Measurement Studio 2010 (.net 4 framework) do the work for the acquisition of data for me?  I want to ensure that it can before buying

  the Studio of the action on your part.

  Thank you.

  You're right in that .NET OR-Scope libraries take in charge VS 2008 and .NET 3.5. There is a workaround to use VS 2010, but you should always use the .NET framework 3.5.

  Basically, you can install the .NET OR-SCOPE 1.1.1 class library on you machine to install the samples. You will then open them in VS 2010, forcing them through a conversion process. Once in VS 2010, you need to remove the reference to NationalInstruments.Common, as it references the 4.0 framework. You will then add the NationalInstruments.Common reference for the 3.5 framework. Then, the program will be able to compile. I was able to verify this and was able to run the FetchForever example with a simulated scope device.

  That being said, it is not officially supported, and I'm not sure when support for .NET 4.0 and VS 2010 will be added. But if you agree .NET 3.5 programming, you should be able to program in VS 2010 with the 5101.

  Kind regards

  Elizabeth K.

  National Instruments | Sales engineer | www.NI.com/support

• Should I purchase Measurement Studio and NI-IMAQ separately or NOR-Imaq included in measurement studio?

  
  

  Hi Vjuno,

  Thank you for your interest in Measurement Studio and NOR-IMAQ. Measurement Studio and NOR-Vision are separate software packages. If you are considering comes to acquire, save and display images from a camera IEEE our NI Vision Acquisition software located on our website (http://sine.ni.com/nips/cds/view/p/lang/en/nid/12892). If you want to set up a system of image analysis then you can buy the Module OR Vision Development, this includes NI Vision Acquisition (http://sine.ni.com/nips/cds/view/p/lang/en/nid/2881).

  Thank you for your interest in our products!

  Eric Reid

• The difference between Measurement Studio and NiDAQmx?

  What is the main difference in Measurement Studio and NIDAQmx. I have a DAQ software, which was originally developed in Visual C++ 2003 M, who initially used Measurement Studio. Now, I want to replace involved studio by NIDAQmx latest version. It is Possible to do?

  Hello

  Measurement Studio is an extension for Visal Studio, which contains a variety of libraries for measurement applications as well as user interface such as graphics.

  DAQmx is the setting for hardware drivers for Multifunction DAQ devices of NOR. If you are using a DAQ card, you need this driver to access with any environment programming (LabVIEW, CVI, C, C++, .NET).

  This means that you can access the material, also with Visual Studio, which has no Measurement Studio installed. Although Measurement Studio is analyze and present the data acquired much easier.

  Kind regards

  Robert H

  OR Germany

• OR e/s 14 Instrument installation wizard is not compatible Measurement Studio

  Hello

  I want to create an Application for Windows OR VISA using Visual c#, but I can not find this new project dialog box template.

  I also read this post (http://forums.ni.com/t5/Measurement-Studio-for-NET/Can-t-find-Microsoft-templates-for-Measurement-St...), but it seems that it is not my problem.

  When I tried to reinstall Wizard NI Instrument of e/s, I found that it provides no support for Measurement Studio.

  I installed MS Visual Studio Ultimate 2012, Measurement Studio Enterprise 2013, NI-VISA 5.4, OR-488. 2 3.1.1 OR August 2014 by this order device driver. My OS is Windows 7 Professional 32 bit.

  What should I do now?

  Thank you
  Thang

  Hello thangvq,

  I took a look at the Release Notes for measurement Studio 2013, and it seems that the Instrument i/o Assistant OR not is not supported in versions of Visual Studio 2010 at the latest.  Take a look at the Support section of the drivers on page 5 for more information.

  Myriam

• Measurement Studio 2015 under VS2012 c# IntelliSense does not

  I upgraqded my MS2013 MS2015 and now intellisense on MS all controls is no longer works. For all other controls language intellisense works normally. When I open an existing project using MS control (Gauage, plots, etc.) all the properties of control NOR and methods are of red color. When I press period after an instance control no properties or methods appear. Exisitng with methods and properties valid projects still compile without error.

  Hi Frank334,

  I tried to recreate what you see by creating a project using measures Studio 2013 for Visual Studio 2012 that mimics the code in your screenshot, installation of measurement Studio for Visual Studio 2012 2015 and again opening the project. Here's what I see:

  

  Everything seems to work. Can you walk us through the process you used to update to Measurement Studio 2015? Have you tried anything to refresh the IntelliSense information for your project? I found this article of stack overflow that can help: http://stackoverflow.com/questions/13375961/visual-studio-2012-intellisense-sometimes-disappearing-b...

• DAQ Assistant does not appear when starting a new project in Visual Studio 8 with Measurement Studio

  Hello

  I have installed a system with the following configuration:

  Windows 7 Prof

  OR MAX

  Visual Studio 2008 Standard

  Measurement Studio 2013 (evaluation)

  Device drivers OR Feb 2013

  When I start a new project in Visual Studio, I can choose a model with NEITHER Windows forms application. After that I get an overview of the classes, but after that, I get no DAQ assistant. What Miss me as is actual references in the Toolbox, with the exception of the buttons and graphics of NOR.

  Someone at - it a solution for this problem?

  Thanks in advance,

  Erik

  Dear Erik,

  I saw the same problem and I think that you can solve with the installation of the DAQmx 8.8 and make sure to include the Visual Studio integration.

  If you have any questions just reply to this email.

  Have a good time.

  Kind regards

  Hossein

• Measurement Studio 2015 Installer creator vs WIX

  What is the reasoning behind the development of the new measurement feature Studio Installer?  I have never had any problem using Wix for mixed deployment c#, C++ that use Measurement Studio products.  It just seems like an odd sense to send the development resources, opossed say, improve support WPF?  Or documentation of the product and samples for WPF?

  Mark DeArman

  Hi, Mark

  The reasons that we have dedicated development resources by creating a builder application to install for Measurement Studio are:
  1. Once Visual Studio has diminished in favour of their native installation project, the number of support requests involving the deployment of Measurement Studio has increased considerably.
  2. Apart from the Setup project, the only other method of deployment which Measurement Studio is fully supported is Windows Installer XML (WiX), which was not well received by customers. Almighty, WiX has a steep learning curve, even to accomplish a simple deployment.
  3 measurement Studio does not support InstallShield, among other popular solutions to WiX for the deployment.
  4. the supported deployment methods, no guide customers what drivers OR and components attached to their application to ensure good run time behavior.

  Builder installer helps to solve these problems and has already received positive feedback from many customers.

  Please let us know if you have any other questions about the Builder installer; We would be happy to help you!

  Thank you

• Measurement Studio for visual studio 2008 8.1.2

  Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.

  Defiance-

  If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

  In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

  If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

  Also, you should be able to create a box Tools tab and add controls.

  If you try to do something else, could you give more details on exactly the type of project you want to create?

  David Rohacek

  National Instruments

• Best way to generate the software clock for USB-6501 of Measurement Studio for c# VS2008

  Hi all

  I wonder if there is a better way to generate a clock software for USB-6501 of Measurement Studio for VS2008 in C Sharp?

  I have developed a clock using C Sharp "Thread.Sleep (msecPauseTime)"; and statements to switch digital output high and low. There are a few things I noticed in creating a software clock in this way:

  1. The smallest delay by the Thread.Sleep command time is 1 millisecond (which means higher clock period is 2 msec-500 Hz, not holding not ball account no. 2 below).
  2. Sometimes the delay I see on an oscilloscope is considerably longer than the delay that I specified in the sleep command.

  In my application, I create signals (a clock, a latch enable and data series) to control what an attenuator step through the USB-6501 RF connected to a USB 2.0 on my computer. This particular step RF attenuator can accept clocks with frequencies up to 10 MHz, so I would like to generate a software clock (without having to connect to an external clock to a line of input on the USB-6501) which is closest to this maximum frequency, and I think that the USB2.0 line could handle clock speeds over 500 Hz. Also, I would like to know why the delays that I see on the scope are sometimes longer than the time specified by the Thread.Sleep command. Is it caused by the suspension of the execution of my program processor for something else, as I suspect? Of course, this isn't a big deal, because it does not affect the time as my serial data and pieces change compared to my clock. However, I would like to know why it does this.

  I appreciate your help.

  Thank you

  Jonathan Becker

  Doctoral research engineer

  Carnegie Mellon Silicon Valley

  Jonathan,

  Since the USB-6501 DIO is software programmed, you are at the mercy of the planning of the operating system and won't be able to work reliably with an external clock in the software.

  You can try to set the priority of your thread 'generation of clock' to improve performance, however, because Windows is not a deterministic operating system, there are still no guarantees.  Operating systems are not required to honor the priority of threads.  You can find examples and information on the definition of the priorities of the threads in c# here:

  http://msdn.Microsoft.com/en-us/library/system.Threading.thread.priority.aspx

  Kind regards