Multiple actions does not not for DPS

Similar Questions

• Keyboard shortcuts AND Actions does not

  Keyboard shortcuts 1 keys do not work (e, g.  "P" to scroll pen options, 'B' to scroll through brush options, etc...)

  The CNTL + and ALT + seems to work fine. In addition, when I hit 'P' or 'B' selects this option, it does not work through them (brush pencil to the replacement of the color to the mixer).

  I completely uninstalled PS especially remove any previous presets (that sucked) and re-installed Photoshop since I discovered it.

  In addition, actions does not correctly or the other. I have a copyright of metadata carried out screening. I had an action implemented to always update to preset on new or open documents. Given that I have re-installed PS, this script no longer works. I made a new model of metadata from 2016, has recorded a new action and implement the handler for scripts to run on the new and open. However, whenever it is running, the script that I have saved always reverts to "Feature of models" instead of pre-recorded format that is available.

  When I type 'P' or 'B', it selects this option, but does not work through them (brush pencil to the replacement of the color to the mixer).

  Go to edit-> preferences-> tools, "If you're on previous versions": Edit-> preferences-> General

  then Unckeck 'Key Shift tool Switch use'

  

• Shared action does not of course 7 to 9

  All,

  Is there any known issued with not shared actions convert Captivate 7 to 9?

  I'd build one to replay a slide from the start, but now that we've updated the action does not work... and I can not understand how to open it to see what I did in the first place.

  Help with this dilemma would be appreciated.

  v/r

  Jay

  Joint actions have been improved in CP8 compared to CP7, because the variables and literals have been added as parameters. This could be the cause of your problems.

  Recently, I explained two scenarios for slides of Replay, maybe this can help: BACK (slide) - Captivate blog button

• LR export action does not open multiple files

  I've updated to the latest Lightroom (2015.5) and Photoshop CC (2015.1.2) this morning which was a bad idea! My action of export on several raw files open only one file at a time in Photoshop!

  I recreated the droplet and tried again. It does not work.

  I can export multiple files without shares of export and that works.

  Help! It's very annoying and slow down in my work!

  It's already there: roplets https://feedback.photoshop.com/photoshop_family/topics/lightroom-6-4-export-problem-with-d? question-answer-list % 5Bsettings %5D % 5Bfilter_by %5D = all

• report interactive apex 5, pivot action does not display columns in the application developed on 4.2.6

  I just installed apex 5.01 on apex 4.2.6.

  When I want to use the pivot of the action on an interactive report developed on 4.2.6 the names of the columns does not appear.

  If I add a new column, it seems

  calculated columns displayed

  Thank you

  Hello

  The pivot must be enabled for these columns.  To do this, you can upgrade the application developed in 4.2.6 as follows:

  -Click on the application

  -Click utilities

  -Click on the Application upgrade

  -Activate the IR Pivot should appear.  Click on the number of candidate object

  -You can select some or all of the IRs to upgrade

  Kind regards

  Christina

• Advanced Scripts of Action does not not in the advanced Actions window

  I have no idea how or why it happened, but on some scripts that I applied to some buttons, when I click on the folder icon to open the script in the advance action window, the script does not load. It shows just blank like this (screenshot below). If I try to select it from the dropdown of existing shares, it does not load. If I try to make a new script again, it will work initially, but the same thing happens if I try to open it again. No idea how to solve this problem?

  

  It looks like the corruption of the file. You're careful with naming of decisions and measures? Never use a name that has already been used for another object.

  If you copy an interactive object in a new project, the action in the annex is copied (at least if you're on CP8 or 9).  Normally slides copy and paste in a new project could help, only bit worried on the copy with the actions.

  Have you already restarted Captivate and maybe your system as well? Worth a try.

• Dynamic action does not not on the first attempt to load page. Work after refreshing the page

  4.2.1

  Hello

  I have a page with a list of selection Order_id and a display _item Product_name.  There is action dynamic PL/SQL that fills the element displayed when the order_id is changed. The problem is that when I opened the page for the first time, if I change the select order_id list, nothing happens. But if I refresh the page once, and then it starts work and the display_item is filled.

  No idea what could be the problem?

  Thank you

  Ryan

  ryansun wrote:

  On a more serious note,.

  1 when you load the page for the first time and try selecting the order_id, nothing don't be past, try refreshing the page once and you will see the option to display with the null value. What I do is. I have two tables

  Orders

  1

  2

  3

  Products

  1A

  2B

  2 Z

  3 C

  When I select the command 1, then since there is only one line of products, the displayed item will indicate A populous. If I select 2, since there are two product lines, I should see the list box.

  Doesn't seem to work and I'm sure, I'm doing something wrong.

  Difficult to be certain that as it appears that someone has been editing the page before you start watching (rather than copy the page experience their own copy). Your article P1_PRODUCT_NAME_DISPLAY he a point value / Expression 1 column = Expression 2 condition P1_HIDE_SHOW = 1 condition on that? Or any other condition of rendering?

  These conditions do not match the dynamic actions. They are applied only during the page see the transformation when the page is displayed first; When it is linked to another page; or after a branch to him. They are not applied dynamically during the activity of the user on the page. In this case, that the status is set to false when the page is rendered first, the same element does not exist in the page sent to the browser. If you want these items to appear conditionally because of the interaction with another user control, then you must initially return the elements and control their visibility using hide/show the dynamic actions.

• Confirm the dynamic action does not not as expected in the APEX 4.2.5

  This looks like a bug in APEX 4.2.5.  I have a page with a "Cancel" button that redirects to another page.  There is a dynamic action that fires on the button with a confirmation action and the text ' are you sure?  However, if the user selects OK or cancel in the confirmation dialog box makes no difference - the redirect is always performed.

  I found this question after the migration of a page that worked to 4.1.1-to-4.2.5.00.88 APEX and were also able to replicate on apex.oracle.com here:

  https://Apex.Oracle.com/pls/Apex/f?p=19896:2

  (Press the Cancel button in the top right of the page redirects to page 1, regardless of the user's response to confirm the popup.)

  I don't need someone to suggest the alternative code, I know how to build my own confirmation processing.  I want to just raise this as a bug as possible and see if there is a solution to make the dynamic action works as it should.

  NB I found this in the patch notes for 4.2.5.00.88 on a fix for a similar problem:

  http://www.Oracle.com/technetwork/developer-tools/Apex/application-express/Apex-425-patch-set-notes-2186274.html

  15984978

  Dynamic action front-Submit with a confirmation message does not

  Hi Tony,.

  I think the problem is that the action of the button is defined as 'Redirect page in this Application', but it must always be "defined by the dynamic Action" as soon as you have set dynamic actions 'click' to a button. Normally, which is automatically changed as soon as you create your first dynamic action of a button, and I just confirmed by creating a test button in your application that has been defined as «Redirect...» ». After that I created a dynamic action the action of the button is set to "defined by the dynamic Action.

  Is it possible that you have modified the action of the back button to «Reorient...» » ? The question why «redirect...» "does not work, it's that we cannot guarantee in what order the browser will process click on events defined with onclick in the tag button itself and those events attached as a click event handlers. This is why it is necessary that everything is defined as dynamic actions. Only in this case you will be able to cancel the treatment.

  Concerning

  Patrick

  Member of the APEX development team

  My Blog: http://www.inside-oracle-apex.com

  APEX Plug-Ins: http://apex.oracle.com/plugins

  Twitter: http://www.twitter.com/patrickwolf

  Post edited by: Patrick Wolf

• I am trying to reinstall Flash CS4 professional as the script action does not work, but now I get an error: 2 message when I use the original CD to reinstall

  I can't get the original disc work on resettlement.  I get the message

  AdobeColorCommonSetRGB

  Error:

  Error 2.

  I'm teaching a class using this program on Macintoshes running 10.9.5 and action script does not work.  It will work on any program designed by using the 10.8, but if you create an animation on 10.9.5 the action script will not work for buttons

  You must manually remove the color in question profiles... Run the cleanup tool and see if it's to help you get started.

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Game audio action does not work in Captivate 7

  Hello

  On the first slide in my class, I added a "quick start" guide It consists of a series of legends that contains text. In each legend, there is a text link "Continue" triggering a tip action to hide the current legend / show the following. This works perfectly.

  Now, I tried to reach audio at each step of the guide. I added a "audio playback" action after stocks show/hide for the first step. No audio not playing. When I changed the audio of the game to be the first action in the script - the script did not work at all. When I changed it between the show and the skin, leather working and show does not. What I gather from this is that play the audio does not work and also stops all this.

  Any advice?

  Thank you

  Just checked, created an action shared with almost exactly the same commands, but grouped together all the containers in text in a group Gr_TC

  Hide:

  

  It worked perfectly. You don't see a label, because it is a common action, to which I just filled in some settings. Attached to three buttons, had 3 containers of text and 3 different audio clips.

  The audio clip plays when it is used in another way? The only difference seems to be that you have a clip of VO and I used one of the sounds included with Captivate.

  Another way would be to fix the audio on the text as audio of the object container. Once you view the text, audio will play, when you hide the text to stop. It was the way to go before COP6:

  http://blog.lilybiri.com/playtime-with-audio-and-widgets

  Lilybiri

• Quiz, 'Last attempt' action does not

  In my project, the user has to choose to create a branch and follow the course or take a branch of the advancement of knowledge. If they choose to take the race management, questions are interspersed throughout the content after the content tested for. They are not classified on the quiz. Most of the questions is configured to allow 1 or 2 attempts. Quiz slides are defined in advance just to the next slide contained before.
  If they choose the branch of the advancement of knowledge, he takes them directly to the first question. If they answer correctly, they continue to the next question. When they answer correctly, they must be picked up at the beginning of the content of this section.

  I have the action of 'Success' configured to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (success goes to the next question). This part does not work properly.

  'Failure levels' are set to 1. For the "last attempt" I also put it to run a tip action that checks if a variable user to check what branching method, they chose, then "go to" the correct slide (failure dates back at the beginning of the content for that matter). This part does not work properly. The project is not navigate to content in case of failure. My quiz is noted, but none of the questions are awarded points (they should be able to answer questions twice, but are able to continue even if they are not properly the second time).

  In Quiz preferences, I "branch of consciousness" checked and 'Allow the movement to the rear', in the region of success or failure, the user doesn't have an attempt to take the quiz. "

  On the question slide, I have "Attempts" value 2 and 'Levels of failure', set to 1. I tried different things in the 'last attempt' fall down and none have worked. The right question slide moves to the next slide and does not take into account what I put in unrolling the last attempt.
  Is there anything else I can check or change to ensure that it works properly?

  Thanks in advance for your suggestions.

  

  I'm done with two copies of each slide in the question.  One at the beginning of the content and the other at the end.  If the user gets the first incorrect answer, they just continue with the content and taking up the same issue (a different slide number) at the end.  For some reason, Captivate didn't work well, go backward.  This double solution the number of question slides in my project, but so far I don't have a big project.  Do not forward to the next project, which has already obtained up to 111 slides, with about 30 more to go finishing.  Because of what I do, my post must be an exe file.

• slide/advanced action does not

  Hello

  I am currently using Captivate 6 and I setup a project that has a timer on the question slide 1st and then I implemented a tip action so when then the timer stops it will jump to the slide results otherwise it will continue on the project.
  Here is my Advanced action.

  

  The timer variable is v_time that I installed on time and created in the variables.

  I put each slide (excluding the first slide of the question and the results slide) with the topic fast action on the entrance and exit of the slide.

  It's used to work when I tested published in the web browser. I have a copy of one I published in January that works but now for some reason it does not work.

  I think there is a problem with the action of jumping to drag, but I'm not 100% sure.

  I tried to recreate a new project with the same tip action, but it still doesn't work.

  I'm stuck and feel I'm wasting my time. I spent 3 days on this and I'm ripping my hair out.

  Help, please!

  Thanks in advance

  Kim

  Kim, what event you attach the advanced action? If you use the 'old' included with CP clock widget (exist also in previous versions), it has no events, will only change the value of the variable associated user. You have action by another event like a drag event (enter, leaving). You have only a message pops up when the time has elapsed, does not prevent the user to answer the question.

  Second question: what version are you using? Associate you the variable v_time in the properties of the Widget? Did you type the exact "v_time" name, because there is a problem with the timer in 6.0.1 widget, which prevents the seizure of some characters. Maybe it's the issue that you are facing now. You must be sure that the correct name is linked and that the variable exists. Lastly but not least, the values of the variable associated with 6 are now 'true' and 'false', not 0 or 1. I just checked the workflow in this way with the widget timer with 6.0 (have another newer version on 6.1):

  • created a user Vtime variable (because these characters are accepted in the properties of the Widget, no respect underscores and capital V)
  • put the clock on the first question slide widget, timed for the rest of the project, countdown with message and associated Vtime
  • created an advanced action conditional like yours, but with true as a literal value; This action will be triggered by each event on enter for all the slides in question except first

  "For the rest of the project" is the timer? Last tip: never use submit all the with the clock widget, because this feature parce que cette fonctionnalite desactivera will disable jump auto everything.

  Lilybiri

• Stop(); Action does not work in AS3?

  I am a designer and usually work in AS2.

  But I created a movie in as3 (to use the function of the BONE), and now my actions to stop do not work.

  What I usually do for my movies, it's breaking down the film in some parts of the main timeline (content, start, end), place stops on each of these frameworks.

  And in the clips that play on these labels, I put a call:

  Stop();

  _root.gotoAndPlay ('content') etc...

  in any case none fixed this in AS3?

  I use CS4 if it matters.

  The stop() command works as well in AS3 as it does in AS1/2.  What does work is to use AS2 terms such as "_root".  In general, if a stop() command does not is because another code's fault or otherwise of the substitution of the stop().

• Facebook, Gmail and MétéoMédia works does not for me with the last update, even in safe mode

  That pretty much sums up it. Since yesterday, with the most recent update, firefox does not display correctly these sites. Someone else posted a question similar to this topic. It has been marked as resolved, but there is no solution posted. Here's his question: https://support.mozilla.org/en-US/questions/963125 I have the same problem as him with fb. In addition to the problem with fb, Gmail doesn't end loading. And MétéoMédia do not display the weather forecast. I'm sure that many other sites are affected as well.

  All sites work properly in Seamonkey, which I use once again, now. I went to oldapps download v. 22 of ff, but whatever the most recent update changed only came when I installed v.22. The problem persists. I could uninstall it completely and then new installation v.22, I guess, but I'm afraid that my browsing history, sessions, passwords, etc., would be affected, and I don't want to find all the files and support first. It's a hassle. Since the sites work in Seamonkey, I'm guessing that's not the fact that I have updated flash at the same time. I don't know how much these sites use flash, either. But if it's a problem of flash, I tell myself I should have the same problem in Seamonkey, and I did not.

  I wish that you guys would have an easy option to restore your updates because it's pretty darn annoying when they cause problems. Usually, they are not lethal problems, however, and the browser still works. Now ff does not work for some sites I use most often.

  Hello

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  __________________________________________________________________

  Also, some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  This will remove not essential info unless you check the box "delete all my personal data too.
  

  Please report back to see if this helped you!

  Thank you.

• Satellite A100: webcam works does not for windows live messenger on Vista

  I recently lost my picture when working for video calls in windows live messenger, the sound of two ways and I can see them, but no one can see me.
  I also bought an external webcam, and it does not work either.

  When I go to Device Manager it says that the two cams don't work properly.
  I tried to update the drivers but they are up-to-date.
  I wonder if it's a problem of Windows live or Toshiba.
  I use Windows Vista Home Premium and the new version of messenger.

  > I also bought an external webcam and it doesn t work either.
  > When I go to Device Manager it says that the two cams don't work properly

  For me, it looks like a windows system problem.
  Usually two webcams operate independently from each other and so I don t think that it is a webcam driver problem I think that it s windows or windows live messenger problem
  Maybe something confused keys registry or files may be some updates to update or similar

  In your case, I recommend you to uninstall the software of webcam software, internal external webcam and the windows live messenger.
  Then, you must clean the BONES and the registry tool like CCLeaner cleaning, for example. It the free tool.

  After this, reinstall the Chicony webcam software and test functionality without installation of windows live messenger.
  If the webcam will be functions then you could install the windows live messenger again.