Media Center message said: "your computer is not digital cable ready.

Similar Questions

• Impossible of is trannsfer to music from the PC to the iphone and he said 'your computer is not permitted', "" you mustauthorize this computer before you download purchases. ""

  Original title: im trying to get my music from PC to iphone and he said 'your computer is not permitted', "' purchases on this computer before you download you mustauthorize." "

  Im trying to get my music from PC to iphone and he said "your computer is not permitted", "you must allow this computer before download purchases." HOW SHOULD I DO THIS!

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that you have a problem with the transfer of music from your computer to the iPhone. I suggest you allow your computer and check the status of the issue.

  iTunes Store: authorisation and exercise.

  http://support.Apple.com/kb/HT1420

  If the question until persists, I suggest you to contact the support of the iPhone.

  Apple - Support - iPhone.

  http://www.Apple.com/support/iPhone/

  Hope this information is useful.

• When you use media center tv, registered and menus do not load and display regular

  When I select tv... then recorded... the screen displays (loading). The load never completes and hangs the system. I have to use (esc) to exit the application

  Hello

  (1) have you installed Windows XP Media Center Edition on your computer?
  (2) what is the brand and model of the computer?

  You can try the following method and check if it helps.

  Method 1:
  (a) computer and do not open any other software before you watch TV. Close software may not be sufficient in some cases.
  (b) after the opening of Media Center, wait about 10 seconds before trying to watch TV.
  (c) If you have recently installed new TV tuner hardware, make sure it is properly connected/sitting, make sure that it is compatible with the version of Media Center you are using.
  (d) reinstall the TV tuner drivers. If you have installed a tuner separately, reinstall the drivers disc that came with the tuner.
  (e) use Windows system restore to restore the system at a time where the error will not occur.

  Method 2:
  (a) turn on the Media Center computer and connect to the Internet.
  (b) click Start, all programs, and then click Windows Update.
  (c) I agree to download plug-ins from Microsoft if you are prompted.
  (d) to read and respond to information on the Web page. Carefully read the page that the information may change from time to time.

  Method 3:
  (a) the television signal must come into the computer through the coax or s-video input. Make sure that you do not connect the standard video cable (RCA style) on the audio or the video output on the graphics card. Use the standard video adapter S-video if we use a standard video cable.
  (b) connect the end of the s-video cable or coaxial cable into a TV set to see if the cable is working properly.
  (c) ensure that the TV signal settings are correct for the Media Center software.

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error, your computer could not reboot after a unexpected, stuck on the black screen

  Original title: Vista startup repair freezes after that give the message "your computer could not restart" and he said that it is looking for problems. I use the original windows disc

  We had a power failure and the computer showed only a black screen.  When I rebooted it, she ran correct problems and they went to green the black screen with scrolling icon on the bottom, which freezes after 30 seconds or more.  I put in the original disc of Vista and ran the fix repairs.  He said it is looking for the most likely, but freezes with blue tab, stopping in the middle of the page.  any thoughts?

  Hello

  You get an error message or code?

  Method 1:

  First of all I suggest you to disconnect all devices external one except keyboard and mouse and try to start your computer and check.

  Method 2:

  Step 1:

  I also suggest you try to start the computer in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If you're able to boot in safe mode, you can perform the system restore to the date when the computer was working fine and check.

  Step 2:

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Access the link below for more information on the Startup Repair:

  Startup Repair: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Advanced, including safe mode startup options

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1

  Hope this helps and keep us informed if you need help.

• I closed and put my computer in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  I shut down my computer and put it in its case after use. 3 hours later, when I went to use it again once I took the case and it was hot. It's on and he said "your computer was stopped because of a problem. Anyone had this happen?

  No. I have not experienced this before, after having turned off. It seems that your Mac was not completely extinguished before you he packed. Make sure that it is actually stopped before closing the lid.

• After the last Windows 7 Corel Draw update gives the error: your computer may not be connected to the internet

  After the last update of microsoft don't work plugin CorelDraw Whatthefont. Use corel capture. I can see only: your computer may not be connected to the internet or you may have a firewall installed that blocks access to the internet.

  We try on Windows 7 and Windows XP, the two are not working. In Corel forum have said, it's the beginning after the last microsoft update.

  Can solve you?

  Sorry for my English.

  Thanks, problem was in router (probably). During weekend router died, now we have new (same type) and it s working on two PCs.

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• HP Support Assistant pop up "a critical message about your computer is available."

  I have the following message popup HP Support Assistant in the lower right of the screen: "a critical message about your computer is available."   It looks and seems suspicious to me so I have not acted on any of the choices in the pop-up window:

  -Find out now

  -Remember me [half-hour] (scroll bar)

  Cancell-

  I am an intermediate user and not sure if it's a legitimate message or something that can infect my computer.

  Thank you

  Bobby S.

  My system:

  HP P6767C

  Processor AMD Athlon (TM) II X 4 logical processors, 4 Lossnay, 2900 Mhz, processor Intel Pentium 4 840 T

  System Type x 64-based PC

  Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Canon Pixima MP980 all in one printer, copier, fax

  Norton 360

  Recent changes to the system:

  Internet high-speed UVerse installed 1 month ago

  Network printer has been uninstalled and reinstalled as a printer USB 2 months ago

  You can always call HP Support Assistant manually and check to see if he tried to get your attention.

  If you do not have the HPSA icon in your taskbar, then you can search the HPSA and start it:

  Start > search / type "HP Support Assistant" > and then click on it to launch it.

  See 'maintenance'...

  • Click in the Section 'Tune Up' > display settings > Notification settings >
  • and see how you have your Notifications implemented, you can change the settings if you like.

  After checking:

  If you think that the message has been sent to you by "something other" than HPSA, run a scan in depth on your computer to eliminate infections or any malware as possible.   Use your best protection antivirus and Windows Defender to start.

• I get this message: "the remote computer could not be found" when I try to run Task Scheduler.

  * Original title: Task Scheduler

  When I try to run Task Scheduler, I get this message: "the remote computer could not be found" any help would be appreciated.

  Hello

  Start button-> type to find Services at top and double click on Services

  Locate Task Scheduler - right-click - Select start.

  You may need to redefine ALL the Services on their default values.

  Windows 7
  http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989

  Windows 7 Service Pack 1
  http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My product activation code is now missing from the computer and I recently received a message that my computer is not running genuine Windows.

  I recently received a message that my computer is not running genuine Windows. The product activation code is now missing from the computer. I had the computer for two years and I'm a product of the case but no way Code to enter as there is no "Acivate Windows option available". In addition, just slui.exe tells me that he didn't and to communicate with the gateway manufacturer. Any suggestions?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {131481F2-8F22-45C4-AB3C-790AED5B7081} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110622 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Kevin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {131481F2-8F22-45C4-AB3C-790AED5B7081}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-619933626-1398643452-1551818003GatewaySX2851American Megatrends Inc.. P01-A0 20101116000000.000000 + 000CCB23507018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Enterprise 200712ywReFrpiwGS5KjJd3wYnxyLIKEE =89388-707-4551751-6501614 3CD066791E2A586

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 9:25:2011 15:31
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAIAAAABAAAAAwABAAEA6GFEEqg3RLFazIA5mCewUIycXq0YOVxd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS APIC1334
  FACP ACRSYS FACP1334
  HPET ACRSYS OEMHPET
  MCFG ACRSYS OEMMCFG
  SLIC ACRSYS ACRPRDCT
  LASRYVITRAGE ACRSYS OEMB1334
  GSCI ACRSYS GMCHSCI
  AWMI ACRSYS OEMB1334
  SSDT DpgPmm CpuPm

  Noel,.

  Thank you I enjoyed your attention and your support.

  I called and Microsoft went through basically the same things that you suggested.

  We did a system restore (at an earlier date) and fortunately he fixed itrself. I'm good to go.

  Who knows why it happened.

  Kevin

• How to disable series when your computer does not work?

  How to disable series when your computer does not work?

  and also how to use for computer B that you recently purchased?

  Thank you

  Shine,

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time. (lightroom is the exception because it is a product of multi platform, so it can be installed on the pc and mac platforms)

  It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software.  This frees an activation if you have the option to install the software on another computer at any time.

  If you do not have access to your old computer because you have replaced a hard drive, upgraded your operating system to format your computer before you deactivate your software or your computer is dead, you can ask Adobe Support to help you disable from a machine, you cannot access. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it.

  Guinot

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

  My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

  What should I do to solve the problem?

  Hello AletBotes
  Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

• Video error - files needed to display video are not installed or not working not properly. Please restart Windows Media Center or restart the computer

  I have Vista Version 6.0.6002.18030 (vistasp2_gdr.090429 - 2357) SP2 installed during an automatic update.  This box is only used as a Media Center

  Now, I get this error when you try to watch HD programming - I get a few seconds of viewing before the image starts to freeze, the acoustic breaks then the error message.
  Recorded at stations SD I will often get towards the end of the program, and it starts too break up.
  The Analysis ToolPak that I found for the Hauppauge 500 t tuner I have reports that all networks have 70 + strength and 100% quality.
  The performance of the Task Manager tab indicates the processor cores ares works at about 25% of capacity
  I had a lot of trouble getting the Pioneer BD drive to work - it turned out to be a very minor mistake, a slider maxed out on the Graphics tab "overlay" card - but until I found this he encouraged to re - install the OS from the original DVD and the problem persists.
  The system used to work properly and there has been no hardware apart from the Pioneer BD drive changes.
  I got ffdshow installed from the beginning, so I don't think that's the problem.

  DVD read OK

  BluRay disks play back ok using the Cyberlink plug in BOF VMC

  Different types of downloaded files play OK using VLC.  So, I conclude that the (integrated) graphics (latest drivers installed) and in the rest of the material are very good.

  Looking through the forums, this seems to be an old problem, but its very curent FRO me and SUPER frustrating.

  The indices of anyone?

  Hello Clement,

  Thanks much for the reply.
  I had already downloaded the Tuner card driver on the site yesterday and installed (this is the same version I already had, but he did not seem wrong to re - install).  No change.
  I really don't understand well enough codecs!  -are you making allusion to the East no doubt not that the encoding of the input signal software cannot do its job properly?  Are the part of the tuner driver codecs? I could not see them on the website of the tuner (http://www.newmagic.com.au/Support/Hauppauge_Vista_Drivers.html)
  Can you please point me in the right direction for the codec pack (btw, I though 'codec packs' were notoriously bad news! and since I recently made a new facility would be not all right codecs be there that they must have been before when everything worked well?)
  I have a chart integrated 'card' on the ASUS P5E - VM HDMI, an Intel GMA x 3500 and here too I have the latest driver from the Intel web site.
  I think I've found the "MS decoder checkup" utility you mention (http://www.microsoft.com/downloads/details.aspx?FamilyId=DE1491AC-0AB6-4990-943D-627E6ADE9FCB&displaylang=en).  I have a Red Cross and green ticks for different decoders but 'Microsoft MPEG-2 Video' (msmpeg2vdec.dll.) decoder is compatible with MCE, but not with MP10.  When selected "update now" button is dimmed.
  Thanks again