Media offline after update for first 2015.3

Similar Questions

• After update for first Pro CC 2015.3 I can not move the values in the effect controls panel

  Hello!

  After update for Premiere Pro 2015.3 of CC, I can't change the value of the property in the effect controls panel by dragging left or right when you move the pointer over the underlined value. The two small arrows appear, but nothing happens when I drag them and it is so annoying. I tried now pressed the SHIFT key and several others trying to drag, but it makes no difference. I restarted the program and my computer but still no difference. All the patches?

  Thank you!

  

  Hello Ann,.

  I found the problem, it's my wacomtablet. When I use the magic mouse, it works great! So, I guess I should update the wacomdriver, perhaps. If your response gave me the idea to check for this. Thank you!

• Updated for first 2015.3 CC and now Audio dropped from stuttering frame-type questions...

  I've just updated for first CC 2015.3 on my system running on Windows 7, 32 GB of RAM, quad-xeons double...

  Seemed like a good idea...  Now, the sound stutters and drop frames.

  I have a multi-boot system, so I just loaded Adobe CC on my boot Windows 10.
  Always first 2015.3 does not play correctly and stutters.
  Has created a new project-sequence and placed an MP3 on the timeline without any video. Looks a sort of boat engine during playback and the visuals on the counters still indicate stuttering as well.

  Anyone else having this problem after the update?
  How can I get my 2015.2 or whatever I had on my system?  There is no menu drop down more on install to install an older version [other sites showed a fall to the bottom of the box where you can install the CC 2014 version but I have yet to see it]

  Major project I want to do and now the first is completely useless after this upgrade.

  If 100% fresh install go on Windows 10 Virgin operating system still has flaws that had my configuration of Windows 7 operating system, I'm not clear how 2015.3 playback can be rectified?

  After some troubleshooting I've narrowed the issue until this CC first 2015.3 don't like my graphics card, a SoundBlaster Z and its parameters.  2015.2 worked fine, but now the sound stutters and playback is extremely agitated turn upgrade.

  For this project, I am just finishing, I'll use, of all things, the HDMI sound goes to my computer screen.  The Nvidia graphics card I do not mind reading.  I'll tinker later and see if I can find a permanent solution...

• No cuda after update of first 2015.3

  Hello I have a video station with nVidia Quadro FX 4800 working on a 64-bit Windows 10 but after that the upgrade of the support of the gpu is missing. I can't change in file-> settings-> general project where it says that mercury software reading. And the same thing happens in Adobe Media Encoder CC 2015.3.

  I installed the latest drivers for nVidia (341.59), this version has worked with 2015.2

  What can I do?

  Thank you

  The response from Adobe is not good!

  The user who said that he was working with CC 2015.2! So if the only change has been updated to 2015.3 it means that Adobe has broken the card, not Nvidia support!

  It's really tiring for the customer when Adobe and Nvidia (fault?) refers to the other for GPU rendering and encoding.

  Then Vinay, please acknowledge the problem with the 2015.3 update or clarify if there is a specific incompatibility between 2015.3 and nvidia driver 341.59 everything was good with the SAME driver at 2015.2

• The application Adobe CC does not detect an update for first 2015.1.  How can I update?

  I work with a group of about 10 publishers.  Most have updated, I can't.  It becomes a problem that we are working on the same projects.

  Here is my solution:

  1. I deleted this file, AdobeUpdaterAdminPrefs.dat

  Info on location here: disable auto update in Adobe Creative Cloud and Adobe Creative Suite 6 apps

  2. then go here and download and install the updated packages: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

• Updated for first CC 2015, output presets are missing

  Updated for first CC 2015, output presets are missing, can you help me? There was a long list of presets, output for YouTube, Vimeo, Sony etc., a long list...

  If you're after the standard list then try to launch Adobe Media Encoder CC2015 first, then try first.  Don't forget to set the h.264 format you consult the relevant presets in this format.

• .prproj has no associated file after update of APPCC 2015.3

  Hello

  I've updated for first Pro CC 2015.3 today, but now all my .prproj files have a file association for Premiere Pro (I'm running Windows 7). I tried to change it manually through properties-> opens with:, but Premiere Pro (like after effects, InDesign, Lightroom, Audition, etc., I've also updated to the latest versions this afternoon) no longer appear in recommended programs or other programs. I tried to add manually via browse-> C:\Program Files\Adobe\Adobe Premiere Pro 2015.3 CC-> going to choose Adobe first Pro.exe, but it does nothing. I even tried doing it through default programs, but it does nothing here as well.

  Is there a solution to this? It worked normally before I updated.

  Thank you.

  Hello

  Just to say, I found the answer in another thread: cannot restore the file alley - .prpproj association

  This response has been from Jerry M0, so thanks to him:

  "Rio and Ann earlier, Salvation

  I did further research and came across a similar issue with older versions of first...

  In the former case, a freeware program called FileTypesMan - Alternative to 'File Types' Manager of Windows has been mentioned.

  Just tried and it put the base registry in my computer then now the association is done correctly, and first is also added to the recommended list. (I know that there is a danger in changing the registry database, but I took the risk - if someone else be very vigilant and do it at your own risk)

  Problem solved!

  Thanks for your answers! »

  FileTypesMan actually solve the problem. However, I hope that this problem can be solved internally by Adobe in the next update, because it is very distracting.

• Now updated for first 14 elements, the playback controls do not work

  Updated for first 14 elements, but now the playback controls (play, stop, etc.) do not work. First 13 items works very well. I uninstalled and reinstalled programs using Adobe uninstallers, did not help. After starting in safe mode, I could get 14 PE for play/stop, although audio has been disabled. Very frustrating! With the help of Mac OS Yosemite 10.10.5

  dizzyo

  Purchased as a download on the website of Adobe Premiere elements 14?

  You went through the usual forest, video/graphic card driver updated, latest version of QuickTime 7 installed, run programs as an administrator...?

  If you buy the product, while you still can (current version, recent purchase), you might want to involve Support Adobe through its Adobe Chat online (download, installation and commissioning).

  Contact the customer service

  Just to confirm... are you saying that elements 13/13.1 first works OK on the same computer, timeline content as first elements 14? You run the 14.1 update, or if you're still at 14? If you have updated to 14 to 14.1, the content of the timeline plays OK in version 14?

  RTA

• How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work.

  How can I get the serial number for update for first pro cs4 4.2.1, one provided with the product does not work?

  You don't need a serial nr for updating a program

  You need the original CS4.0. install and add the series nr. to get the program to work.

  Now you can update to 4.2.1

• After updating photoshop cc 2015 it keeps closing.

  After updating photoshop cc 2015 it keeps closing

  Hi Gigi,

  The answer to your question depends on the details you provide.

  You use Windows or Mac?

  What graphics card do you use?

  It crash during launch or while closing Photoshop?

  Have you tried to uncheck the graphic processor of preferences > performance?

  Please post on the Adobe Forums.

• Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and feature on Eleme

  Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes

  mnicolett4

  What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.

  There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.

  The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.

• TM taped preparation backup after update for Sierra

  My MacBook Pro (retina, 15 inch, mid-2015) is incapable of me past the stage of "prepare the backup...". "after the update to Mac OS Sierra after 3 days. Other posts on this topic are pointing the finger at Sophos. I have disabled the software, and the system is still not able to go beyond the stage "preparation".

  I was able to save on a USB - although it took much longer that usual (I have two backup methods).

  Then, I removed the network location of the TM preferences and tried to restore again. However, the system fails in the final step of adding the network drive in the preferences. So I am only left with the ability to backup to a disk physically connected only. This is very bad and I am disappointed that Apple doesn't have a case KB already open on this.

  Problems after update to MacOS Sierra:

  1 TM fails backup backups existing network regardless (of Sophos or otherwise).

  2 TM fails to create a new backup of network location

  3 TM works with a physical backup drive connected locally.

  It has been several days after the release of MacOS Sierra: I'm waiting for Apple even recognize a situation which is detrimental to the users.

  http://pondini.org/TM/D1.html

• Windows cannot open this file (after update to CC 2015.3)

  Hello..

  I've just updated 2 days ago, and now all the file adobe icons give me this message when clicked on:

  "To open this file, Windows needs to know what program you want to use to open it.  Windows can go online to look it up automatically, or you can manually select from a list of programs installed on your computer. »

  If I manually select the program, he acts as if nothing is selected,

  If I try to watch online, it returns without any results...

  My only solution is currently launching Adobe Premiere, After Effects or any software and the use of the menu open from inside the application.

  
  Opening files of their records is not an option now at all :/

  Please advice

  Please check if it works Premiere Pro 2015.3 problems after update to 2015.2 if it's for Premiere Pro.

  You will be advised to discuss with us to Support Adobe

  Concerning

  Stéphane

• Satellite L775: No download 'BlueRay Player' after update for Windows 8

  Hello

  Please help me...

  After upgrade from win 7 to win 8 it is not possible for playback of bluray on my Satellite L775.
  Where can I download the software for bluray playback?

  Under the following link, it says that Toshiba offers to install the TOSHIBA Blu - Ray player (last third section grey highlight).
  http://www.Toshiba.EU/innovation/generic/Windows8-upgrade-stepbystep/

  I'm looking for the web now for several hours, but could not find this software...

  Thank you.
  Carine

  Hello

  I read in the forum that Toshiba 'BlueRay Player' is a software under license and, therefore, it of not possible to download this software from Toshiba UE driver page.

  If you want to install and use the "Blu - Ray Player" Toshiba after updated Win 8, you must contact the center of Toshiba Support Officer (hotline) and ask these software download.

  There is also another option to play the Blu - ray disc. You could use a tool of 3rd pieces called VLC player (free) that allows you to stream movies.

• HI, Siri would not speak in Italian Luca voice after update for Sierra

  HI, why Siri not talk in Italian Luca voice after update to Sierra?

  Open  (Apple menu) > System Preferences > accessibility > speech.

  Next to the system voice menu, select Customize...

  Scroll down to Italian, and then select Luca, and then click OK.

  It will take a few moments to download the new voice.