Media playback volume goes down when any usb device is inserted (REPORT of BUG)

Similar Questions

• Windows crashes when any USB device is connected

  Hello

  I have a laptop Dell Latitude D505 with Windows XP. Recently, whenever I plugged in a USB device, Windows would freeze and I have to hold the power button down to turn it off.  Since then, I tried to replace the RAM, re - install Windows on a new HARD drive and taking the other components (Wi - Fi, CD). I still don't understand why it freezes. Any ideas?
  Thank you very much!

  Hello

  1. don't you make changes to your computer, after which the issue started?
  2. have you tried to connect USB devices to a different USB port? If so, they work on other ports?
  3. have you tested the USB devices on another computer?

  Uninstall and reinstall the usb host controller driver and check if the problem persists.

  http://support.Microsoft.com/kb/283658

  I would recommend that you update your BIOS and drivers from the chipset and check if the problem persists.

  WARNING OF THE BIOS:
  Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• What happens if the network goes down when the broker DataGurad (with fast failover) is configured?

  Hello Experts,

  We have configured Dataguard in our environment, now anxious as the broker. But we have some queries.

  1. what happens if primary fails (failover or passage)?

  2-if failover occurs, go back manually when the primary is available?

  3-if Eve falls down, how would react broker?

  4 - If the network goes down (for any reason) for some time, observer cant find primary and standby, how would he react then?

  Please help me with your advice.

  Thank you and best regards,

  Vignacourt zerwali.

  Hi David,

  Let me put in a way if I understand your question. So, you have broker + observer configured in your environment. FSFO occurred which means your watch becomes primary and is running. Then after some main real-time is alive and what will be the observer will do here. ? right. ?,...

  If my interpretation is correct, here is the answer,

  (i) when the old primary remains alive, just bring up the State. The observer resets automatically (if its market) the database, bounce the old primary and synchronize with the new primary (i.e. your old database pending). But remember that your old primary will undergo sleep role yet...

  After the process described above,

  (II) If you want that your old primary again, we have to do a manual failover to get your old configuration.

  Hope he would have deleted you. !!

  Kind regards

  Pradeep. V

• Cannot open any usb device - help!

  cannot open any usb device - including external hard drive for back in place - in one of the ports on my computer - they all work on other computers - worked well on Friday - doesn't work don't not Monday - get up unknown device message and shows even in Device Manager - have you tried to uninstall etc - does not work - nothing I found solves the problem - can my computer blew something that only affects reading USB keys?

  Hello

  1. what exactly happens when you try to connect the USB device?

  2. you receive an error message when you connect the USB device?

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Cannot use any USB device after the upgrade from XP.

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Hi, I guess that's an old problem, just my computer from MESH 6 to upgrade to Windows 7, Upgrade Advisor said that there was no problems. Now, I can't use any usb device and the mouse either. Tried evertything and am frustrated. IN XP, there is no problem at all. It must be a Windows 7 thing
  Robin

  Windows 7 handles USB devices very well.

  Please describe your problem in more detail. Tell us what means "cannot use any usb device and the mouse either. Exactly how do you try? What happens when you try? If you get an error message, please quote verbatim.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• Why the frequency of images in Photoshop CC 2014 goes down when I play the video?

  I'm currently editing a video file in Photoshop CC 2014 and on the digital SLR camera, it says 30 fps with when you open the video in Photoshop. But when you play the video, the pace becomes red and goes down to 5 frames per second. It gets all confused. I have already edited a video with the same fps and quality in Photoshop and it worked well, but this time it won't work. I also tried closing and reopening already. Help, please.

  If your computer cannot go as fast as playback, Photoshop "will fall" frames. If you play again, it should be a little smoother. In addition, you can adjust the playback quality less and more images are rendered.

  Benjamin

• My laptop goes down when I try to play games. Internet works fine however.

  My laptop fell down while trying to play WoW, Civ, RATW, and Spore.I done a virus scan mcafee says the computer is clean. Internet seems to work very well as well.

  Hi DanielWilkinson,

  ·         You receive an error when the laptop goes down?

  ·         Have you updated with the latest drivers?

  Check to see if the following is useful.

  Method 1: Reduce hardware acceleration. To change the hardware acceleration, follow these steps.

  a. Click Start and then click Control Panel.

  b. click appearance and themes. Click on display.

  Note: If you use Windows classic themes, use the next step:

  c. Click Start, click Control Panel and then click view. On the settings tab, click Advanced.

  d. on the Troubleshooting tab, move the hardware acceleration in the second position of the left and then click OK.

  Note: The following message is the description for this slider control position:

  Disable all DirectDraw and Direct 3D accelerations, as well as all cursor and advanced drawing accelerations. Use this setting to correct severe problems with DirectX accelerated applications.

  e. click OK to close the display properties dialog box.

  Method 2: Log on to the manufacturer's Web site and update the laptop with the latest graphics card drivers. In addition, update the last chipset and other updates to the device driver.

• What is the best/better way to reenumerate USB ports from a script? I need to emulate the same enumeration that occurs when a USB device is either plugged or unglugged to a USB port.

  I'm working on a network to restrict access to the ISSO role USB mass storage, only. Management wants to access USB Mass Storage for ISSOs on all workstations while blocking access to USB mass storage to all others... on all the workstations. They also want to that USB ports remain available for everything except Mass Storage.

  There are many ways to do it, but the only 'reliable' method, I found so far is to point the HKLM\System\CurrentControlSet\Services\UBSSTOR\ImagePath key to some fake file to block ports and rename it back to access it again.

  To do this, I need to do things more two 2...

  1. make sure that the ImagePath key always has the false value at startup, and

  2. create a login script that affects the ImagePath value when a member of the ISSO group connects... and reset it when they log off.

  Which meet the requirements of the direction if only it worked! The problem is that USB devices must be listed again to re-read the ImagePath registry key after each change. Reconnect the device will do, but it would be unwise to rely on a user to restrict access (fox/Coop).

  The following Microsoft KB seems to be the way to go, but we do not have compilers on the network...

  http://support.Microsoft.com/kb/259695

  I know that this hack to the system is not the most elegant, but I'm just trying to make the management happy.

  Nobody knows...

  1. any (more elegant) way to meet the specified requirement, or

  2. a way to re - enumerate USB devices from a script.

  Thank you! ... Todd

  Hi Todd,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Equium M50 - doesn't recognize any USB device

  All my USB devices (printer/external disk hard/usb keyboard, mouse, usb-serial adapter / any...) are not recognized by Windows Xp SP2, but USB port will provide power to the device. Everything worked fine before that I don't know what is happening. I tried all the USB ports on uninstall and let windows install again without any luck... also tried to do a diagnostic of Toshiba and pass USB.

  any sugestion? Thank you.

  Hello

  Go to Device Manager. Here, please select the root USB Hubs and properties.
  You will find a power management tab. Uncheck allow the computer to turn off this device to save power

• Tecra A9 recognizes any usb device

  Tecra A9 - PTS52E

  I need help/information. USB cannot recognize any device, i, e... Flash / sticks of memory, floppy drive, external cd/dvd or hard drive. previously works very well and suddenly stops and research pilot.

  TIA

  Hello

  Have you noticed yellow exclamation marks in Device Manager next to USB host controllers?
  Check it!

  Even if the yellow exclamation points are not visible in the Device Manager I recommend to remove the USB host controllers and root device manager USB hubs and restart the laptop again.
  Wait that all USB controllers will be recognized by Windows and retest your external USB devices.

  Good bye

• My computer with xp pro shut down recoqnizing my usb devices including my printer, scandisks.

  My computer has suddenly decided not to recognize my usb devices.  Like my printer, my scandisk, my dvd drive external storage drives.  I tried to repair xp pro but no luck.  I tried reinstalling the drivers with no result.  I have removed the usb port in the hardware device drivers.   When trying to find new devices of the computer will attempt to find an audio device but then cannot find the drivers for it.  Then, it shows that there are other usb devices but lists them as unknown.

  Hello

  ·         Remember to make changes to the system?

  ·         How long have you been faced with this problem to?

  ·         What is the exact error that you are experiencing?

  Method 1:

  I suggest you run the fix it is present in the article below. If this does not work then, follow the steps mentioned in the article below.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  See also the article mentioned below.

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/kb/885624

  Method 2:

  Uninstall and reinstall the drivers for the USB key on the system and check if the problem is resolved.

  a. click on Start menu and click Run.

  b. type devmgmt.msc in the run for the Device Manager dialog box, and then press ENTER.

  c. click USB Universal Serial Bus controllers () and expand the list.

  d. right-click on USB hubs and select uninstall then remove it form the system.

  e. restart the computer and let drivers for installation of the USB automatically.

  I suggest you return the item mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

• Computer do not normally sleep wake up and the computer hang when external USB devices are connected

  Hello

  I have a Windows 7 Home Premium 64-bit desktop CyberPowerPC, and there are currently two problems with it:

  1.), I have two USB ports in the front of my case. I am connected to my computer. Then I tried to connect my external hard drive using the USB cable supplied with it, but just at the moment where the end of the USB cable touched the port, the screen is black and automatically rebooted and froze when the display shows the brand CPU that is before the login screen. I actually press the restart on my case button to restart the computer with the hard drive already plugged. Then everything should work normally.

  It's the same thing when I tried to connect my iTouch 2nd generation.

  This problem occurs sometimes, however, but I wonder if someone always has a solution to this?

  2.) whenever I put the computer to sleep and he remains asleep for a while and I turn it on it once again, powers for about 2 seconds then it turns off. I have to turn the power supply and light in the order so he could get out of mode 'sleep'.

  I was wondering if you have solutions to this problem, as well.

  Thank you.

  Original title: new Windows 7 problem

  Ok.. I'll try again...

  The problem is caused by a bad 'ground' between the USB ports of the case and the motherboard. Static electricity is originally the USB device to short on the USB port which is originally the motherboard restart mode.

  I had the same problem and got my computer case exchanged. The problem has not entirely disappeared, and I use the USB port on the front on the card reader, just in case.

  It can also be a problem with the power supply or even the motherboard. It is very difficult to locate the failure without replacing in turn, a process that happens to be a bit expensive.

  The above is the reason why I recommend that you contact the MANUFACTURER. Don't take no for an answer off the manufacturer or supplier. It is a problem annoying which can eventually damage your operating system if it is enough...

• any USB device USB not Republic United Nations notes senza

  Without some special USB device USB no Republic - Cosa fare UN notes? Grazie leopoldo Rogante

  Hello

  This is an English language Forum.

  Please go to

  http://answers.Microsoft.com/en-us

  to select your language from this link English 

  Don

  Questo e UN forum in lingua inglese.

  If get di andare

  http://answers.Microsoft.com/en-us

  by rates the lingua da questo link English 

• Malware can be transmitted through any USB devices

  Hello

  Please excuse me if this is a silly question... I remember reading an article on the possibility of USB devices (such as keyboard, mouse, lamp) from malware if the QA on the device has not been made properly.  I know that it happens for USB drives, but I'm not totally convinced that he might happen to keyboard, mouse, switch KVM etc..

  I'll share my keyboard and mouse between two PCs using a KVM switch.  One of the PC is very old and I don't know if it's totally clean or not, so I just wanted to know if it is a good idea.

  Thank you very much.

  You cannot transfer malware using a keyboard or a USB mouse. You should feel comfortable using the KVM switch. However, if your old computer is on the same LAN as your new computer and file sharing / printing is enabled, make sure that both computers are clean in all cases.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!