My computer with xp pro shut down recoqnizing my usb devices including my printer, scandisks.

Similar Questions

• Computer Vista will not "Shut Down"

  Why is Vista not 'Shut Down' when we try to? The computer gets to that stage and works on and until what we manually turn off the computer.  When we click on Shut Down, the OS disconnects then goes down at the stop, but isn't.  Anyone facing this problem.  It is found on all 3 computers OS Vista

  Also, when updates Windows tries to install computers work for too long at a time in the mode of installation on the same day.
  Don't know if they are related.
  Thanks for the tips.

  Hi jem820,

  ·         When was the last time it was working fine?

  ·         Have you made changes on the computer before this problem?

  ·         You receive an error message all in stop or restart the computer?

  Follow these methods.

  Method 1: It could be due to a program or device driver interfering with Windows power settings. See the article and try the steps in the article.

  Why my computer won't turn on or off quickly?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-wont-my-computer-turn-on-or-off-quickly

  Method 2: Install the updated drivers for the graphics card on the computer visiting the site of computer manufacturer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link to return the computer to a Normal startupmode.

• Satellite Pro A300 can not find USB devices

  Hello forum,.

  We have a customer who bought a Toshiba Satellite Pro A300 with us, but he gets a strange mistake about it.
  It connects to a hub 5port Sandberg USB 2.0 to one of the usb ports, the pc detects the hub, but when it connects a /Memory stick to the hub, nothing happens.
  the hub and the memory stick works on other PCs.

  I hope someone can help.

  Best regards

  John Bork
  DANBIT A/S

  Hello

  What happens if you connect the memory stick directly without this USB hub?
  I also had a USB hub, but these hubs are a little complicated and delicate USB specification allows a certain power and according to the devices that connect, you need to use an active USB hub, that means with external power supply.

  But normally, Satellite Pro A300 should have enough USB ports if it of needed, I would recommend a USB hub with 2 or 3 maximum ports

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• Computer doesn't recognize is not the Vista USB devices

  I have been looking for forums for hours. I put music on my mp3 and it worked fine, I switch between two different players. then I went to plug one of them in and... . nothing. USB ports are supported but computer, do not put the devices, I can't access it anywhere. Ditto for everything I plug into them. fee but usually has access to any device I plug im in. going to vegas tomorrow and would really like to put new music on my player. can anyone help please?

  * original title - USB problem *.

  Hello

  ·        You get an error message when you connect the USB device?

  Method 1:

  I suggest you follow the steps mentioned below and check if the problem is resolved.

  With the drive plugged in

  1. go to Control Panel by clicking the Start button and select Administrative Tools.

  2. click computer management , and then select disk management on the left

  3. then turn on the player.

  Method 2:

  I suggest to assign a new drive letter and check if the USB key questions in the computer.

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Method 3:

  Remove and reinstall all USB controllers. To remove and reinstall all USB controllers, follow these steps:

  1. click Startand click run type sysdm.cpl in the area of publication, and then click OK.

  2 click the hardware tab .

  3. click the Device Manager button.

  4. develop Bus USB controllers.

  5 right-click every device under the theUniversal Serial Bus controllers node and then click Uninstall to remove them one at a time.

  6. restart the computer and reinstall the USB controllers.

  7. connect the removable USB storage device and test to make sure that the problem is solved.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why not my Macbook Pro to manage over 3 USB devices?

  To make music, I need 3 usb devices. However, my macbook has only 2 usb ports. I thought that using a hub usb can help, but every time I plug 3 devices (one on macbook and usb hub with two usb devices), one of the devices does not work.

  For example, I have an audio interface, a mouse and a keyboard. When all three are connected, the midi keyboard does not work (is not recognized). When I unplug the mouse, the keyboard is recognized.

  There is no work around for this? It would be a problem with my usb hub?

  The devices have their own supply or is the hub, a powered hub? If it's a powered hub connecting all three devices inside.

• Media playback volume goes down when any usb device is inserted (REPORT of BUG)

  Whenever I have plug in a USB device (iPhone / USB key) and I media play (video in the browser / media player / music etc.) device that plays the media has the volume automatically turned down to very low volume.

  While I can increase the volume for the single device that is quite annoying... I have disabled the option of mixer to allow other apps to control the sound, but it continues to impose...
  I think it of more of a bug than anything else, but happy to try and proposed the solution

  Eeek just figured it out

  Sound > playback devices > Communications tab
  Change option to reduce the amount other noises of 80% nothing to do...
  I think that Windows thought my iPhone was a communication device, even if I tried to load ;)

• MacBook Pro shut down unexpectedly

  My Macbook Pro (with the retina, end 2013) stopped unexpectedly. Running OS X Yosemite 10.10.5. It's never happened before, but did it 3 times today already. Not on again unless I connect it to a power source even if it was 60-80% charged each time that its judgment down. It doesn't give me an error when I turn it back on, the only thing substantially different is that it defines my date and clock in one year. I made diagnostics, but it does not found error!

  I would like more information: can put you a list of Etrecheck here please: download from etrecheck.com

• HP laptop laptop 15-ac124tu: drivers not available to hp for laptop-15-ac124tu computer with windows pro 8.1

  Hello world

  My laptop is hp laptop laptop 15-ac124tu and initially, it comes with freedos. After you have installed windows 8.1 pro in my laptop, I can't find driver for my laptop in official hp website. It lists drivers for windows 7 & 10 only, but not for windows 8.1.

  Please give me suggestions to solve the problem as soon as POSSIBLE.

  Thank you

  Magassa

  Realtek LAN driver (LAN)

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69612.exe

  Driver Audio Realtek High definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69611.exe

  Driver and Intel Chipset Installation utility

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69575.exe

  High definition (HD) of Intel Graphics Driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69588.exe

  Intel Management Engine Interface (MEI) driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69592.exe

  Intel Trusted pilot run of the Interface (CITY)

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69602.exe

  Synaptics TouchPad Driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69613.exe

  Realtek card reader driver

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69610.exe

• Return of HD crashed on computer with Acrobat Pro 11.0 so how do I get it?

  Hard drive crashed and I had to replace it. Now how can I get Acrobat Pro 11.0 back on this computer? I have the code 24 digits...

  Hello

  Please see the link here download Pro or Standard versions of Acrobat DC, XI or X

  I hope this helps!

• I have a computer with xp pro SP3, I need to reinstall but I can't find it in the program add remove verified page updated box ut anywhere I can find it

  the computer is a desktop gateway 433 c which to be honest, I have a clean record and used, help to restore the registry to the backup of it is when and support or convenience store leave it xp service pack 3 is not in the program add remove page I can download and install again or what

  the computer is a desktop gateway 433 c which to be honest, I have a clean record and used, help to restore the registry to the backup of it is when and support or convenience store leave it xp service pack 3 is not in the program add remove page I can download and install again or what

  I solved this problem myself i went and downloaded service pack 3 and just reinstall it but thanks to PA bear not to understand everything what I said that reminded me that if you want to get something fixed do it yourself because someones going to be hateful if your grammar is a little off if you notice I left out the punctuation confused is I did right, but you're right reg cleaners do more harm then good

• All computer laptop 5 minutes shuts down and having to re-enter the password to get on the line again.

  Original title: on every 5 minutes my laptop stops and I have to get my password to get on the line again... Why and how can it be resolved?

  on every 5 min my laptop stops and I have to keep having to put my password to get back online or open to the top of my screen... Why?

  From what you have said, I think that your computer is just goes to a blank rather than turn off screen. This can be changed by the following text:

  Right-click on an open area of the desktop and select personalize.

  Then at the bottom right of the window, select screen saver.

  Here you can change the time of 5 minutes or uncheck the box marked

  On Resume, display the login screen.

• My computer (Windows 8) Auto Shut Down

  My computer (Windows 8) less than a year (Dell) has just started to close. I checked all power management settings, and nothing is changed. I am at a loss as to what to do. There, can anyone help? It's very irritating, to say the least.

  Please read this wiki to know how to find and download your Event Viewer logs

• Laptop computer Pavilion: lap top shuts down and re starts randomly after I upgraded windows 10

  It's so boring that I ensured that I learned from reboots after updates are at a standstill but it stops again and re starts random ideas anyone

  Hey @cavvie,

  Unfortunately you can not do this. It will take a clean install of Windows.  Automatic is grayed out and you can not change this, you need to reinstall the operating system. I suggest aclean installof Windows.

  You can use your recovery disks. But you will need to remove all and reinstall Windows.

  Thank you.

• How to permanently remove games on computer with XP Pro?

  I already know how to uninstall games (Minesweeper, solitaire, hearts, etc.).  What I want to accomplish is removing completely so that they cannot be put back.  Is this possible?  And how?

  Hi ChanaB,

  You can follow the steps in the link that explains the steps to remove windows XP below games.

  http://support.Microsoft.com/kb/307768

  Hope this has been helpful.

  Kind regards
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think