New player does not start after cloning?

Similar Questions

• New T460s does not start after initial reboot

  I have recommended T460s to a friend. Now there's a problem: after installation and restart (Win 7), it does not start. Seems to be to do something (welcome...) and that it is. After about 30 minutes of black screen and a cursor. Then she presses button / stop for 4 seconds, and welcome once again. He left for one night but no change when she awoke. What to do now? Reinstalling Windows?

  Everything seems to be OK now, it just took a little patience...

• Windows10 car does not start after cloning of SSD (mid-2010)

  Hi all.

  In my mid-2010 mac pro, I have a windows disc 10 (upgraded to 8.1 windows) in the Bay 3. I want to update to SSDS. So, I bought one, I cloned the drive with winclone app pro (v.5.4) but the new drive is not bootable. When I choose to boot from it, it stops at a white (command line - like) screen BACK with a flashing dash.

  Any suggestions?

  The problem was to limitations of El Capitan. The operating system does not other applications to write to the MBR (...) od disks. If the new disk is unable to be started.

  I installed Yosemity in another disc and clone the HDD to the ssd from there.

  There was another solution to disable "csrutil" of Terminal recovery, but another problem I had, doesn't have me let go to recovery mode (frequent readers of fusion).

• Windows 7 - Media Player does not start after the upgrade. Cannot update Windows media player either

  I have long used now on Windows 7, Windows media Player and just got an update from Micorsoft. Set, now when I try to open the drive it tells me the the wmplayer file has a version number of 12.07600.16415 where 12.0.7600.16667 was expected.

  Windows media player is not adequately at a standstill and must be reienstalled.

  Then wonder if I want to install the player from the microsoft Web site. When I check the Yes box, I go to the site and he informs me that the version that I already paid for only a few months ago on my computer because my computer is relativley new, cannot be downloaded.

  There are no other options to fix the problem that caused Microsoft with the update. I tried to do a restore but it then cause a problem which made the player doesn't do not not the CD to record the right as he said that I had to get the new drivers that microsft does not automatically download drivers when they remove them in this process. But again, no tell me what I need drivers. I tried to switch on my computer systems and to find them this way, but it says I have already that I need on my computer?

  What should I do? I need this ASAP as I am a singer and rely on this process for my concerts and other...

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Media Player does not start after loading Media Feature Pack for Windows 7 N

  I have installed Windows 7 Ultimate N and wanted Media Player 12, so I followed the instructions and downloaded and installed the Media Feature Pack for Windows 7 N and had no problems with the update.  When I start Media Player I get an error message that says "Windows Media Player is not installed correctly and must be reinstalled.  You want to install the player from the Microsoft Web site? ».

  I'm running x 64 and double checked the update I downloaded was for x 64.  I ran a scan SFC and he returned 100% complete without any problems.  I try next?

  Transfer your question in this forum, please: http://social.answers.microsoft.com/Forums/en-US/w7music/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• new player does not start

  Hello and thank you in advance,

  I installed a seagate 320 g disk in my T60. I used a usb 2.0 to serial ATA to clone my original 100 g Hitachi drive after booting from a cd in ultradrive Bay. Before cloning, I disabled IBM Predesktop Area in the bios setup. When the clone is finished, I have reset the Predesktop Area to normal and then tried to boot from the new Seagate. The system hangs with a totally white screen, cursor blinking in the upper left, after the Lenovo spash and front Windows.

  I updated the BIOS of the system about two months ago.

  I don't know that he has this driver: installed system32\drivers\Shockprf.sys can create incombatability or how to uninstall Shockprf.sys to test this situation.

  I don't know what to try next.

  Neil

  When you image with Ghost, you must use the ib switch in both directions in the order that you capture four boot sectors. Take a look at this thread and this one, hopefully, they will provide the necessary information.

  The installation program with the disks where they are is correct.

  Hope this helps

• New G770 does not start after installing Ubuntu

  Do not use is not Windows, I just installed Ubuntu on this new G770 wipe all the previous partition in the process.

  Now when you are powering the laptop, the power led lights up, but isn't it, no display, mechanical noises from him, nothing. Cannot access the bios.

  What is the cause and how to fix it?

  Kind regards

  I had a battery problem. Which is fixed now.

  Installation is complete on the Lenovo G770 with InsydeH2O Bios. He managed.
  Here are the steps I followed:
  The disk partition table is TPG. I created a partition fat32 in first position and set the boot flag (partition type is EFI, checked with gdisk ef00 type). Then an ext4 /, year ext4/Home and a sectoral approach.
  The installer told me that with this partition in use table format, I should normally have a separate partition for the boot loader code, also not yet would it be possible to install the boot loader for a partition. I ignored that did not create an and we went to the installation process.
  He filled out. I then installed grub-efi-amd64 and everything works perfectly on this laptop, the system now works fine.

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Does not start after the reload of the operating system

  OK, this is my story of boredom.  I have a Lenovo T61 Type 6463-5BU, S/N L3-xxxxx.  The hard drive died a few weeks ago, and since then, I have received a replacement drive under warranty, that is the exact same drive type.  We had a backup image of the old system under Norton Ghost and managed to get the image to the new disk once it has been installed.  To do this, we used a utility called OS
  'BartPC '.

  Since then, I did pretty much everything I can think of to get the system to boot, including playing with the BIOS settings, setting the drive to 'boot' and 'active' with the help of a number of public services, including the good old "diskpart" and many others.  The reader will just not start.  A few times I could read the disc using Bart in command prompt mode, but I never managed to boot from it.

  The laptop has a finger print reader, but I was told several times that this has nothing to do with the problem.  So... before I cut off the finger of a person and drag in the player... What am I doing wrong here?

  Note of the moderator; s/n, under the direction of protection own members

  AGoodSolutionideas can save I hope as your image.

  For later use, take a look at this document from Lenovo on the use of Ghost; Partition does not start after being restored with Norton Ghost - NetVista / ThinkCentre / ThinkPad...

  I know it says 'prior to 2004 systems', but it is still topical.

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• Re: Smoker L30-10 X PSL33E does not start after upgrading RAM

  Hello

  I have a problem with my laptop.
  It has 1024 MB of RAM (2 x 512), but it wasn't enough, so I decided to update to 2048 MB (2 x 1024).

  I bought two modules and my computer does not start after changing them.
  It was only a screen black (same BIOS has not started). I tried another combination of installation of memory modules RAM.
  2 x 1024 - did not work
  1 x 1024 - did not work
  1 x 1024 + 1 x 512 - working but not properly.

  BIOS find that I only 896 MB (1024-128 for the video card)
  I said OK. Let's see what will show windows. He was also 896 MB.
  I launched CPU - Z and it shows that the total size of memory is 1536 MB (medium detect both modules).
  I found that CPU - Z detect 1 module 1 024 MB and 512 MB secondary, but the BIOS detect only 1024 MB 1536. How is that possible?

  I have fought, is that my BIOS is old, then I update the toshiba Web site form most recent version, but the problem persists.
  Please someboy help me and tell what to do.

  PS. the Modules are new and work correctly.
  They have been tested.

  Hello

  Have you used two identical RAM modules?

  What kind of modules did you use?

  In my view, that the problem is related to the new, inserted modules.
  There must be something wrong with the modules or modules are not completely compatible if the laptop can not boot after installation.

  According to a few pages of the book handles the DDR2 533 MHz (PC2-4200) 200-PIN SODIMM modules.

  Did you use these modules?

• Satellite P200D-130 does not start after upgrading RAM

  Hi, I just upgraded the RAM on my P200D 130 but it does not start after that.
  I removed the 2 Hynix 1 GB PC2-5200 and put in 2 SO Kingston DDR2 2 GB PC667 (should be the same as PC2-5200).
  Post-market nothing happens, light power control is turned on, I him stays CD drive but screen black, no beeps.

  I put one of the 1 GB modules, it starts normally, then I tried a 1 GB into the lower slot module and a 2 GB module in the top slot and it works.
  I tried a single 2 GB module in each slot, even in the form of 2 2 GB modules.

  What could be the reason, better: what would be the solution to ensure that the modules of 2 x 2 GB to work?

  Thanks in advance,

  Michael

  Hello!

  I think that both modules are not compatible to the laptop.
  Normally you can upgrade your laptop to 4 GB. Look in the user manual.

  The RAM, you should bring the computer dealer and request a new one. More buy modules with the same specifications and dimensions. Try buying RAM with the same specs as before.

  Good bye

• Windows Media Player does not start, and the accidents of life Mail

  Hi all

  I have a problem: I'm using Vista Home Basic version US, MS 2 MS and my Windows Media Player does not start, Windows life Mail (worm 2009) crashes when I want to write a new e-mail message and does not work Windows 7 Upgrade advisor. So there must be a common problem.
  Any suggestions how to solve this problem would be highly appreciated.
  Marek Köter

  Hi Marek D,.

  A. what happens when you start the media player?

  B. what happens when you run the Upgrade Advisor?

  C. when he last work very well?

  D. recent changes made on your computer?

  E. you get any error message?

  Please answer in return.

  For issues related to windows live mail, you can post your queries to the discussion of direct mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Bindu S - Microsoft Support

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)