Media.Windows - Media - foundation.enabled funcationality to 35.0

Similar Questions

• Media.Windows - Media - foundation.enabled set to false does not stop the MP3 files to play rather than the economy. I want my file save instead of the rear. How?

  I used to be able to click on the MP3 files and they would save, according to the setting in my Options. Now when I click on a link to an MP3 file, it goes to a player page, I don't want to.

  I looked through the help here, and it is proposed to amend media.windows - media - foundation.enabled to false. I did, and it made no difference. (Restart after making the change did not help either.)

  I use version 26.0 in Windows XP. I had not downloaded MP3s since July, so I don't know which version this started.

  Windows XP uses Media Foundation, it uses DirectShow (DirectX). To turn it off, it was a different preference:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste media and make a pause so that the list is filtered

  (3) double-click the preference media.directshow.enabled from true to false.

  I don't know if this changes enter into force immediately or after you exit and then restart Firefox.

• I want media files to play in outdoor applications. Media.Windows - Media - foundation.enabled has no effect for me.

  So ridiculous that something changes unexpectedly. I run a recording studio. This is how to make money to eat. I could always click on a wav/mp3/etc. and choose Save or open with an external drive. I have to do this a lot. The only way I seem to be able to do now is save it somewhere and then open it from there. Thank you. Twice the work. Media.Windows - Media - foundation.enabled = everything that has no effect for me. I want to say what I really think, but I'll bite my tongue.

  Edit: Are you kidding me? It is required to install a software to be able to post this question? Still bite my tongue...

  Try the media.directshow.enabled pref set to false.

• Windows Media Player enabled at startup interferes with sound, video and other sources

  Hi, this is a known issue since I've had this laptop second hand! But always thought that one of the USB flash drives was the cause (Sandisk Cruzer Micro U3), since the mouse cursor blinks like crazy until everything is fully charged and becomes stable. It is clear now Windows Media Player peut cause this conflict for two reasons. A single, "WMP" is pre-activated on startup? (as confirmed with the Task Manager, he just goes there and "sparkles" like crazy). And two, "WMP" wants to seize all media, he can find by default automatically; I "can I" accidentally put as such (during an update of Windows that you are prompted), not sure?

  A purchased late 2009 "Pinnacle PCTV Pro HDTV USB Stick" product had never worked right? Cause the software "TVCenterPro" was unstable, and TV shows have been troubled and often froze. OEM is finally released with a great release of TVCtr Pro5x ("TVCenter6"), and it works much better! But I could only install it in trial mode until I found the CD product key.

  I uninstalled and reinstalled TVC6; but no TV (or FM radio) channels can be found in the full activation mode? And better actually worked in "trial mode; which didn't make any sense? Pursuit of the investigation, that's when I discovered "WMP" behaviour above; and forced a complete process tree removal. I did the same thing to TVC6, which cound not 'see' peripheral integrated audio from the laptop in full mode? And on reloading the program, it worked! TVC6 can now detect the device audio and pick up channel and stations by their identifiers as he did in "test" mode There's more to refine what I should do to properly operate the TVCenter6. But I need to know why "WMP" havoc on audio, video and other sources, hardware and software!

  The 'specifications' are Internet Explorer 9 (new), Vista Home Basic SP-2 and Windows Media Player 11.0.6002.18311. The embedded video is ATI Radeon Express and the audio Realtek High definition, the processor is Intel Pentium Dual Core & so on.

  * The system doesn't have a virus etc and is up to date. Has anyone met a similar behavior with Windows Media Player?

  PS: I just start WMP(11x) again, and of course, the mouse cursor begins to blink like crazy immediately. The only solution is to make the highest (force the tree closed the process and prevent WMP launched with the use of the other audio video).

  It turned out that the real problem was much worse than I thought! I had to reinstall sound, video and other device drivers; Windows Management Framework Core for Vista x 86 [(bundle 32 bits: Windows Powershell 2.0, Windows Remote Management 2.0 ("WinRM"), Background Intelligent Transfer Service 4.0 ("BITS"))], etc.. And preparation tool system update to find and fix registry I didn't know were there? (42 total, only 4 keys were fixed. The other 38 were removed one by one, after finding a way to change the access permissions; not even administrator has for Vista Home Basic; for files also). Addition of a few executables of line at the command prompt (indicated in respective Microsoft etc. support messages and articles online); and what you said that I had already done all troubleshooting (failed?). After working on it for two days, the system suddenly broken to normal; and works better than ever. Windows Media Player (11 x) is working great now and is no longer remains in memory when opening and closing several times; hardware audio and video is surprisingly better; even the works of volume mixer! And that weird State "crazy cursor" that caused the blue screen error if allowed to go on long enough are gone! (even after the insertion of misc USB flash and other devices). Windows updates found nothing to "change" other than the periodic updates. I also ran the command line to stop several languages of the poll"(tout ce qu'il s'appelle?), and"Windows features"appears much faster than the overall speed and performance." All that's left is to tweak "Windows features" for optimum performance; Therefore, the problem is solved!

  Please note: I can't turn off the storage management removable and Remote Differential Compression etc to speed up Vista even more (not). TVCenter6 works fine but "hangs" in memory (at the end).

  For these questions, please go to the related post via this link: optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled.

  Support: Please add a "Mark" button for the problems solved by the user (and when Microsoft does not provide the answer, as is the case with all other messages); so I can close the nets, I opened as 'resolved on mine'.

• How to use DirectShow or Windows Media Foundation with XBox Music (Windows 8) app?

  Hello

  I have a few 3 rd-party DirectShow Media Foundation codecs/filters and that I use with Windows Media Player.

  How can I get these codecs/filters to work with the music app XBox? I am running Windows 8.1 Pro update 1.

  Thank you!

  Hello

  Codecs are based application and it is not possible to use the DirectShow media player codec, or windows with enforcement music XBOX. At the present time there is no codec for music application.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Videos YouTube does NOT play if media.mediasource.enabled is set to true (Youtube with HTML 5 Player). WHY?

  When you watch videos on Youtube, I use the new HTML 5 player. It works fine when media.mediasource.enabled is set to 'false', but then I can't have the full experience because that lack of features!

  If I let no. video will load, which means that I can't watch any video on Youtube!
  As a solution, I installed the Plugin "Youtube Control Center" (missing in the list below). But it would be nice if I don't use this...

  Even better would be if Firefox would be supported WebM. But this doesn't seem to be the case since YT uses exactly this Format with its new player... (And if I activate this media.mediasource.enabled (put "true") nothing works more.)

  Firefox plays the 'old' WebM format in its default configuration (media.mediasource.enabled = false). You can check it out here: http://www.webmfiles.org/demo-files/.

  What I've read, turn on MediaSource will allow you to play the "new" WebM on YouTube from Firefox 31. Even if preference exists in Firefox 30, I don't think that the actual code is there, which would explain why this ability to YouTube advertising causes the blackout.

  See: http://www.ghacks.net/2014/05/10/enable-media-source-extensions-firefox/

• Media Foundation Protected Pipeline EXE stopped working

  I just installed Vista Home Premium, with IE7 and WMP11.  I tried to play an MP3 file and had this error - "Media Foundation Protected Pipeline EXE has stopped working."  Farm of WMP11.

  Any ideas what's happening?  Any help is appreciated.  Thank you.

  Well, after days of messing around, I solved the problem on my system.

  I use a motherboard with a pair of GTS8800s 680i I also had a Dual DVI card 7950 third PCIe slot.  If I deactivate or remove the 7950 card I can play video in media player and media center.  I took a little further.  In addition, if I put ALL pci video (even a Quatro NVS 440 PCIe x 1 card) in the system, I get the same problem.

  I removed the 8800 cards and put a pair of ATI cards in their place, as well as my 7950 card in the third PCIe slot, and everything works perfectly.  Then, for fun, I put a pair of FX4500s in and no problem...  Then, I borrowed my buddys FX4500x2 pair cards (8 GPU) and put a straight FX4500 in third place and still, no problem.

  I think that the question (at least in my case) is related to the presence of a map of 8800 with ANY other card in a slot 1 x PCI, PCIe or REVISE.

  Not sure if this will help anyone of you out there, but it worked for me.

  concerning

  J.

• I can't transfer files flv to mobile to the computer, when I tried to transfer the file, a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  I can't transfer files flv to mobile star Samsung Galaxy of the computer, when I tried to transfer the file, showing a dialog box indicates that the file is opened in the Media Foundation Pipeline. Exe

  Discussions were merged.

  Deleted duplicate.

  Hello Arun,

  Thanks for posting back.

  If you have successfully transferred your files and they are stored in a location on the hard disk, that is, in a folder or drive on your computer, they will remain on your computer, regardless of any number of reboots.

  Hope this information is useful. If the problem persists, please post back for assistance.

• Should I Microsoft DRM plug-ins or Windows Presentation Foundation? The status is 'unknown' and Action iis 'finding '.

  These 2 plugins are not needed?

  Windows Presentation Foundation

  When the .NET Framework 3.5 is installed, the client computer is configured with a Windows Presentation Foundation plugin for Firefox:

  http://msdn.Microsoft.com/en-us/library/bb909867.aspx

  http://msdn.Microsoft.com/en-us/library/aa663364.aspx

  If you need to install Microsoft .NET Framework 3.0 or above all do not turn it off.

  Microsoft DRM

  read the response of cart :

  http://forums.mozillazine.org/viewtopic.php?t=418289

  If you have Windows Media Player 9 and above all do not disable, maybe crashes WMP

  your choice

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled

  (!) Refer to this post: Windows Media Player enabled at startup interferes with sound, video, and other sources

  Obviously the Vista Home Basic SP-2 (optional) Windows features is more damaged than expected? None of these options has tried several times using different techniques can be enabled or disabled. I also had similar problems with uninstall some windows (and hidden) updates so I can reinstall them (including Service Pack 2: Windows6. 0-KB948465 - X 86) and 'can' be related.

  After the attempt to turn an optional feature on or off (to speed up Vista, is not necessary, or is necessary), in this case: "an error has occurred, not all features have been changed successfully." And it takes an unusually long time before it fails too? If I try to uninstall a Windows or hidden, in this case update: "an error has occurred. Not all updates have been correctly uninstalled"; but others were like "Silverlight" etc. If I try to reinstall Vista 5 languages SP-2 KB948465 Installer, I get: "the requested operation failed. A system restart is needed to roll back changes"ERROR_FAIL_REBOOT_REQUIRED (80070bc9).

  Even Windows updates failed to install Powershell 2.0, WinMF 2.0, and BITS 4.0 (read the post via the link above for more information). And if I do various attempts to troubleshoot and resolve these issues (and so on), the Blue error screen occurs finally.

  Other misc registry errors found; but were obsolete or left behind from the previous uninstall (not critical). Even in SafeMode with networking, all bet three errors have occurred (with startups and the services that are disabled; Microsoft services were 'hidden').

  The link in the installation of Service Pack 2 window (for more information on this specific error) goes to a Microsoft Support web page that explains this problem exactly as regards to SP - 2 mainly; Article: http://support.microsoft.com/kb/947366. But none of the solutions work or are applicable, since the system restore could not go back enough and I have not a Vista Home Basic CD (it is a second hand laptop that I will eventually replace it with another that has Windows 7, etc.). More Vista Service Pack 1 is already 'not supported' and SP-2 will soon follow. There is therefore no need to buy a CD to launch the "startup repair tool" (via another case).

  * Ironically the laptop works well overall, but some programs such as TVCenter6 are not able to function normally (DirectX. Net3 etc work fine) and require some resources that do not work due to the above problems. I can get on the internet using Internet Explorer 9 very well also (although Silverlight and Powershell etc. are required for certain functions to display or work).

  Please advise, Chris.

  Updated, I have invested in PC Health Advisor to 'fix' the registry problems; I was not able to manually set Windows features, specifically. When the computer reboots, I ran Windows Update and it worked again! Such that it auto-updated dot- Net Frame 3.5 Service Pack 1 (made in first), Powershell 2, WinRM 2.0, and BITS 4.0 etc.. I was so happy that I reinstalled Silverlight to Explore maps of Bing etc and tried again the functionality of Windows; no avail.? And he discovered damaged the account administrator; including commissioning elements "right-click" menu etc. (reinstall Vista SP2 manually failed too; almost from the beginning).

  To restore, I implemented a new admin account, renamed the one damaged, disconnected, connected to the new one, tested and deleted the renamed account; It worked! To retry the Windows features, the Admin account was again damaged. so I repeated these steps to restore Vista and had to address admin custom etc all over again just through (what is called "Aero" is enabled, but did not prevent the performance. Aero does not officially come with Vista Home Basic but gets 'active' to upgrade to Internet Explorer 9!).

  But in no way does this solve the problem base with features of Windows? I am amazed at how fast and responsive H.B. Vista Service Pack 2 is overall using less system resources; Despite this heart problem? And took a snapshot of what Windows Update installed completely. Fixed given by the support of third parties as a result of PC Health Advisor of the PC maintenance utilities (made by ParetoLogic I recommend instead if this ), has no also. And was not different from what I had already exhausted; stretching on the days. What I can possibly be "gone" which is at the root of the problem "of the Windows features" (as an option)?

  Update: I restarted PC Health Advisor several times: found and fixed more various defects of registry; found five obsolescent hardware device drivers (downloaded and installed updates for modem integrated, Realtek sound, "Value Added package" mass USB, Atheros wireless (WiFi); due storage manually remove the registry key for Toshiba VAP not in Control Panel?; restarted the laptop, did the account Admin is again ruined?) (in the same way; but not "Windows features" this time) And has been replaced with 'test' admin account for now. Revived the PCHA once again, found several flaws of registry; restarted; revived the PCHA (lack of only 1 minor registry this time and fixed), everything tested OK. Hard drive defragmented PCHA, put in place a third replacement admin account while remaining connected to test admin (deactivation and reactivation recent items starting reset not his "right click" menu). Running of new PCHA carefully before logging in a third new account Admin (health high, not mistakes; was then low mid level), connected off test, connected to the third replacement Admin account; realized that Windows Process Activation Service is not included in Vista Home Basic (SP-2). Windows Installer module did not work and can not be started; then I opened the Manager of tasks in administrator mode and managed to do the work. I downloaded the Vista CD torrent; but it requires a blank CD for this (and so on).

  Nothing has worked? The only solution found online so far is to reinstall Vista Home Basic Service Pack 2 edition, which is not possible (for the reasons). There must be a way to run a downloadable and OS utility repair record; When I discovered Reimage (point com) I peut buy as a last resort. If it does not reach the root of the problem and fix it, or if the Microsoft technical support cannot? I have no recourse but to buy another laptop (with OEM Windows 7 preinstalled; which is cheaper on this Toshiba Satellite A135-S2276 level).

  If I find anything else I will update this post (still pending from Microsoft to answer this question and other positions).

  Here are the latest steps taken to solve this problem that many there have also, as follows:

  (!) If you want to try this yourself, omit all deletes registry keys tried except «VistaSP2...» (for a total of 5 to 7 keys).

  (*) I kept those strictly for FYI purposes, while one who is also having this problem may avoid in go through what I had.

  (*) If I had known 'VistaSP2-... (KB948465) "is the correct name for the key (s) Service Pack 2, I could avoid all others.

  A ran the other (3rd party) utilities and other tasks, admin account is damaged is no longer; but root question remains?

  Tried to install standalone 5 new SP-2 languages. but not with the same "error in registry" repeatedly?

  Removed 50 updates beginning with the top of the list of MSW that Vista is back (all), because of the error in config.

  About 9 keys starting at the bottom this time and worked until I got to this key, that I could not remove the abduction:

  Update for Windows KB949939 did not have an uninstall option and may not be removed in high regedit.

  Changed permisions them key to 'force' a delete (changed owner, granted full control to the 'administrators').

  Removed other keys at the bottom of the install MSW list but standalone SP2 has not yet (in the same way).

  Found another potentially corrupt key with no. Uninstall KB938371. a 100 + instances of it and were withdrawn.

  Find more cases of this key (/ multilingual country) and changed "permissions" to remove all.

  A ran a search of all keys to make sure that all were completely removed from all categories; in the record high.

  Continued with the uninstallation of updates of DSM of the last upward; revived after all the few (which prompted the it).

  But still, the standalone Vista SP2 installer has failed in exactly in the same way? (following the removal of updates).

  Found and removed three updates DSM more with no uninstall option: KB937287, KB955430, Windows Search (4.0).

  The second key was part of the first? Removed a little past these, restarted, SP-2 (run as Admin) has always failed.

  High Ran regedit in mode 'permissions' to delete the keys to potential RETICLE; Search 4 uninstall appears!

  Deleted 4 research and restarted Installer but SP - 2 has not yet? Uninstalled four updates more in the list.

  The following entry is Service Pack for Microsoft Windows (KB948465), but he is damaged and cannot be uninstalled?

  This must be the problem, given that some of the deleted key had to do with "iCBS; has run high regedit.

  Used exactly the same procedure to manually remove the keys to Vista SP2 with care; but there were too many entries!

  Revisiting previous research, I realized that these keys starting with "VistaSP2 -" can be deleted. It worked!

  Service Pack for Microsoft Windows (KB948465) was finally removed from the list of updates installed after discount!

  Removal of two more MSw update to make sure it not more corrupt Scriptures; the Service Pack 2 Setup program has gotten away.

  But it suddenly abandoned shortly after the file copy process has started with the same error of registry; restarted.

  It worked! Everything was great when a system error suddenly interrupted the installation but 0x80070bc9 error has disappeared!

  The Setup dialog window prompted "0x800f081f' with more information on the Microsoft web site.

  Again running the preparation tool for the system Vista (Home Basic SP-2) update to fix "missing component CBS.

  Run the Vista SP2 installation program again, process installs other Microsoft Updates; but everything stops in the same middle point?

  Reran the tool again, rebooted, re-run Setup of Service Pack 2, same event occurs: error system 0x800f081f.

  CheckSUR log file lists 10 (f) CBS Watchlist missing package and 441 (f) CSI lack of deployment total key.

  According to the research done on this error, the only 'solution' again is to reinstall Vista Home Basic SP - 2 ed?

  And the two service items Microsoft Office Service Pack 2 Setup, I had already tried with the initial error.

  The irony is that the laptop works better than ever, but specific programs such as TVCenter6 will not work?

  Made of in-depth research on the error "0x800f081f" etc. (occurs with SP1 install also FYI); run the tool again.

  Remains found components for Vista SP1 not in the list of updates installed therefore some errors checkDUR.

  Used the same technique above to remove "VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000; iCBS but left.

  Again running PC Health Advisor, this time in high fashion, analyzed twice, found 14 registry errors and fix them.

  Who finally authorized the second error to install SP - 2. ("0x800f081f"); but still, Vista SP-2 does not go to reinstall?

  A run PC Health Advisor; found No registry errors either. If the Admin account is stilldamaged .

  I'll keep this account as it is until what I hope to be the final solution be found; and implement a new Admin then.

  Curiously, now it almost immediately invites "SP1 must be installed first" and is a sine qua non for SP - 2.

  As with Service Pack 2, SP 5 languages-1 has been downloaded; SP - x causes complete multilingual features to win at "overpoll".

  Service Pack 1 abandoned installation (already installed); ran high regedit and delete all sets of keys KB936330 (about 50).

  SP - 1 still wouldn't reinstall; used high regedit to remove the many KB936330 key sets and subs as possible.

  But Vista SP - x abandoned always with the same alert. only to discover 'integrated Service Pack 1 cannot be uninstalled?'

  Never after deletion so mamy keys manually, SP-2 (and SP1) was still as installed; in the box of Winver.

  After keys deleting both remaining SP - x, I realized it was unnecessary; and others deleted inadvertently.

  All this could not uninstall Vista Service Pack 2 (SP-1) to be (re-) installed to fix the underlying problem.

  After reviewing tried everything so far to see what can be done; I ran the uninstall of the elevated command line.

  But the result is the same; the prompt returned in a few minutes, but SP - x via GUI can take more than an hour?

  Conclusion: after finally getting the method calls BACK to (re) - install Service Pack 1 to work, it failed at the end!

  "Mode and on the process in an automated"undo"install", records were destroyed during the restart.

  Apparently, this version of Vista Home Basic was integrated (installable)? SP-1 and requires the CD (OS)!

  If I had known this all along, I would have improved (at least) to Ultimate. Which is exactly what the person I gave

  the laptop used far have done without any problem (less a video cable that fell off under the keyboard).

  How Microsoft can come up with such a version (SP - x) for (laptops), this are not equipped with CD?

  Because without it, there is no way to fix problems like this an 'off' (via Windows Upgrade also) internet.

  This case is classified as insoluble with regard to the original question.

  Hello

  wrong forum

  It comes to the installation of vista operating system instance

  try to repair:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

  or windows update:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• What device does support these drivers: driver in user mode WUDFRd.sys, miniport driver AMD multi-vendor, driver Windows Driver Foundation-user mode?

  I'm having a lot of problems with my computer because of those mistakes: I have these drivers but don't know what they take over pilot mode-user WUDFRD.sys, multi-vendor AMD miniport driver and driver windows driver foundation - user mode.  It states that if I no longer use this device to remove.  I don't know which device this is for on my computer.  Someone can help me.  Yes I know nothing about computers on this level.  I only know that I lost a computer and I don't want nor can afford to lose this one too.

  Also I have errors on the following reports: iexplore.exe version 9.0.8112.16464 has stopped working.  I need a PnPDriver (States is necessary).  I hope someone can help me with these problems.  Thank you for your time and your consideration.

  Hello

  1. What is the full error message?

  2 Windows operating system is installed on the computer?

  WUDFRd.sys is a Universal Disk Format (UDF) file system driver that Windows uses to read CD/DVDs in the UDF format.

  Multi-vendor AMD driver Miniport is a type of device / integrated module is an AMD processor-based motherboard or video card AMD (ATi).

  For more information about the Windows Driver Foundation-user-mode driver - see the link:

  http://msdn.Microsoft.com/en-us/library/ms810052.aspx#wdf_intro_topic4

  Also check out the link and follow the steps in the article to resolve the problem with Internet Explorer.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-problems-with-Internet-Explorer

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
   

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Windows 7: installed XP virtual window. Get Enable integration featuresfailure on start up.

  Windows 7: installed XP virtual window. Get enable integration features on start and it fails every time. Yes, virtualization is enabled in the BIOS. Yes, I uninstalled and reinstalled several times the Virtual XP window. I always get the same result. Error message: integration features have been disabled. How can I get the acceptable integration features? I tried many tools | Selections of parameters and multiple restarts of the storefront of XP and restart the computer.

  Hi kepBrian,

  It seems that there is a problem with the integration components.

  Method: 1

  I suggest you to download the components of integration for the XP mode.

  Visit the following link to download the integration components.

  http://TechNet.Microsoft.com/en-us/library/ee681616 (WS.10) .aspx

  Method: 2

  Also I suggest you to enable virtualization of hardware on the computer.

  To enable virtualization of hardware on the computer, you will need to make changes in the system BIOS.

  Follow the steps to change the system BIOS.

  a. when the computer starts, press clear key to enter the BIOS setup.

  b. now, access the virtualization tab and select Enable hardware virtualization.

  c. now save and apply the settings.

  d. restart the system and see if the XP mode works correctly.

  Note: Everything by changing the setting in the BIOS be aware on the changes you made. Unwanted changes can crash your computer.

• Get the error message "Windows must be enabled before you can connect. You want to activate now.

  Original title: impossible to activate Windows XP

  I had to reinstall XP Professional. Now, when I start the computer get a message saying "Windows must be enabled before you can connect. You want to activate now? ». When I click on Yes, the desktop backround sometimes nothing happens. the activation wizard does not open and no error message appears always.

  Hi Dale,

  Since you are not able to open a session in normal mode, log in in safe mode and perform a few steps that would help you solve the problem.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Perform the steps mentioned below and see if it helps.
  a: turn on your PC
  b: Press F8 repeatedly , then in Mode safe
  c: Logon as per normal
  (Note: administrator password is usually empty, but I hope you know your password)
  d: Authorize the Office to load completely (who answered "Yes" to continue mode without failure)
  (Note: this is just a long way to say go to Safe Mode)
  e: Click Start - run
  f: type exactly: rundll32.exe syssetup, SetupOobeBnk (then click OK)
  (Note: a single space after 'rundll32.exe' also the Oo are two letter o in "oobe"; capital and the comma are important)
  g: Wait a few seconds (although you won't see any change)
  h : Restart your PC normally (start - stop - restart - Ok)
  i: You will be able to return to the Normal Mode.

  Good day!

  Answer please if you have any questions.

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• "Your computer is in danger" even if Windows Firewall is enabled.

  A warning appears on the bottom right warning me that no firewall is enabled, even if the Windows Firewall is enabled.

  See screenshot.

  Hi SRD75,

  Try clicking on start-> run, type &-> services.msc-> Ok.

  Windows firewall-> right click-> Restart search.

  Now, research center of security-> right click-> Restart.

  I hope this helps.