Medieval total war
Medieval total war will not play on my vista but will play on my xp. What should I do? Y at - it something that I can download to make
does it work?
... You don't need Windows 7... Why buy an expensive overrate and OS for a $20 game? Medieval total war can play on vista... just right click on the game icon > click Properties, under compatibility, click on run this program... blah blah and select "Windows XP (Service Pack). and at the bottom, click on run this program as an administrator. Check on here and tell me if it works, if it's not I have afew more things flat.
Tags: Windows
Similar Questions
-
Satellite P20 - 504 shutting down / crashing during playback of Medieval: Total War
Salvation;
I run a game program, (Medieval: Total War) that sporadically stops or freezes / crashes my laptop. Sometimes it works OK and sometimes it crashes.
I think it might be a graphic driver problem nVidia, even if I run other programs of game with higher spec requirements.
Is there any where on the Toshiba site, I can actually download new drivers? I searched the Toshiba site and found that there is some possible updates but no installation to actually achieve the download itself... confusing.
Any help is appreciated.
Rob W.
Hello
Can you please check this topic.
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2581&MessageID=8148#8148There is a nice discussion on shutting down / crashing when you play a game.
-
Medieval Total War (Activision)
I try to play Medieval Total War, but when I try to start a new campaign, the game crashes. I am using Windows 7, 64-bit. I tried to use older versions of Windows, but nothing works. The game was played before (for many years). Any suggestions?
By this link its not compatible with your operating system. I check the website and see if there is something they can suggest. If you did the compatibility mode not much more to suggest other than see if there are patches.
MCP. MCDST. LVL 80
-
Can't play Medieval Total War on Vista
I put the properties to Windows XP Service Pack 2 and 256 colors. I was unable to activate the administrator under game properties option. I am able to select an option of campaign, a period of time, and a nation, but after 3-5 seconds, rather than starting the game interface and associated with the card, I get an error window microsoft indicating that an error with the program and I will advise if a solution is found.
I removed and re-charge the software several times and also used the oldest programs feature on the control panel. I played this game without any problems on my older xp machine.
Hi cheebs,.
Welcome to the Microsoft Answers site.
Vista Compatibility Center, it seems that Medieval Total War is not compatible with Windows Vista. You can see the report here:
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=medieval%20Total%20WarFor the list of games compatible with Windows Vista, you can check from the above link Vista Compatibility Center.
For help on the game, please post your request to ActiVision forum forum Sega according to the manufacturer of game:
Activision:
Sega:
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Medieval Total war Gold (released in 2002) does not
When I try to start Medieval Total War he loads the film writing and then goes to the start screen, but it is a law for the promotion of Canadian artists before the main menu is loaded and I get a standard 'an error occurred' with the only option is to close the program. I tried the compatibility with Windows XP SP1, 2 & 3 and a solution posted here http://shoguntotalwar.yuku.com/topic/66766/How-to-run-Medieval-on-Windows-7.
Looking at the directory in virtual_store there is a report in a file called crash.txt who reads
Medieval_TW.exe caused an EXCEPTION_ACCESS_VIOLATION in the Medieval_TW.exe module in 0023:006DB038
EAX = 0000006C EBX = 031F3DA8 ECX = 00024BEC EDX = 000220 C 1 ESI = 0C9F5828
EDI = 000000EB EBP = 0002DE60 ESP = 0018 C 148 006DB038 = 00010202 EIP = FLG
CS = 0023 DS = 002 B SS = 002 B'RE = FS = 0053 GS = 002 002 B B
0023:006DB038 (0x0C9F5828 0 x 00000002 0x000000F8 0x031F3DA8) Medieval_TW.exe
0023:0071C3A0 (0 x 00000002 0x0D9F3828 0x053771D8 0x000001E0) Medieval_TW.exe
0023:0071BD27 (0x00E7A5A0 0x00000000 0x00000000 0x00000001) Medieval_TW.exeThere is also a newspaper called error.log file
Errors of session started: Sat Mar 23 22:27:11 2013
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
Errors of session started: my Mar 25 15:23:23 2013(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOST
(E:\Mtw_atvi\frontend_base.cpp(956): call DirectX: DDERR_SURFACELOSTWindows 8, ASUS HD 7670 (processor AMD Radeon), 10 GB memory DDR3 of ram, 1 TB HD, processor AMD Fx (tm) - 8120 EightCore 3.10 Ghz
All the graphics drivers are up to date.Not sure if I can give more complete information and any help would be appreciated.
PS since I saw the confusion in this regard in the past I want just to clarify that this is total war, I am referring to
http://en.Wikipedia.org/wiki/medieval:_Total_War
See you soon!
This game is not compatible with Windows 8.
You can always search for patches or updates available for this game from its Web site that can make it work with Windows 8. If there are updates to update or fixes, you can install it and check.
Also, make sure that you have the latest updates of Windows installed and has the correct version of Direct X.
I suggest that get you in touch with Technical Support of game:
http://www.Sega.com/games/medieval-II-total-war-Gold-Edition/
-
My husband threw all my product codes for these pc games and I can't download them for my son on our computer. If anyone knows how to get these product codes that I would really appreciate the info!
Hey GraveIcy,
According to Microsoft games are concerned, you can get a replacement product key. To do this, contact
Microsoft customer service:
Games for Windows: (800) 537-8324Note: There may be a fee to get a new product key.
When you contact Microsoft for a new product key, make sure that you have the following items available:
1. the product CD / DVD, if the product came on disc
2. the computer on which you want to install the product
3. the parties read your original product key, if it is available
4. the number of 'inner circle' on the CD-ROM of the productNote: This number is preceded by an 'X' and contains seven digits.
Reference:
How to get a new product key for Microsoft Games for Windows, Streets & Trips, or MapPoint
http://support.Microsoft.com/kb/973457For the remaining games, you can communicate with the suppliers to support with the same.
Rome Total War Barbarian Invasion
http://www.Avanquest.com/UK/software/Rome-total-war-barbarian-invasion-51876?meta=play&cat=action&sub=first-person-shooterMedieval 2 total war and expansion Pact
http://www.Avanquest.com/UK/software/medievalii-total-war-108160?meta=play&cat=action&sub=strategyThe battle for Middle-Earth
http://games.EA.com/lordoftherings/Star Wars Empire at War
http://www.LucasArts.com/support/Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Medieval II: Total War Kingdoms errors and closes when I run the extended version
Hi, I'm an Italian Player. I have the Italian version of medieval 2 total war and the italianversion of the expansion of the Kingdom. When I play with medieval 2 total war not expanded, it is all ok. When I play a Pentecost of the four campaign special, it's still all ok. But when I play the game using the kingdomx.exe file I get an error at the beginning of the game. I have the error before the SEGA text and I get an empty error message.
I want to play whit a mod which require the departure of the kingdom.exe and I can not play if the gam to hang. Help me please!Hi Niles86,
· Did you do changes on the computer before the show?
Follow these methods.
Method 1: Try to run the game as administrator.
How to apply once with a full administrator access token?
Method 2: Follow the steps in the article.
The problems of the game performance
http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems
Method 3: Update the graphics/display drivers.
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
How can I get Medieval 2: Total War to play on Windows 8?
I get a message that says: "this application is not compatible with the operating system installed. Please upgrade to Windows 98SE, Windows 2000 or more. »
Is it possible that I can make this compatible game so that I can play the game on my computer? It worked fine when I ran with Windows 7.
-Thank you
Hey, if I had this problem too
This is how I fixed it
install the game (if you haven't already done so)
Perform a clean boot ( http://support.microsoft.com/kb/929135 )
and then undo all
then right click the game
Click on "RUN AS ADMIN".
then run normally
IF YOU HAVE KINGDOMSwhich may or may not work, so if it doesn't work and it says: "cannot find kindgoms.exe".
then run normally
If you are having problems with the THIRD AGE: TOTAL WAR
then do this
do everything until the handle he leaves normally
Reach
C:\Program Files (x 86) \SEGA\Medieval II War\mods Total
or if its steam then
C:\Program Files (x 86) \Steam\SteamApps\common\Medieval II War\mods Total
then change the name of the game you play less, IE. Americas
change for americas2
then change Third_Age_3 in the Americas
(It's not permanent, if you want to play Americas even once, go and return Americas third_age_3 and then return to americas2 americas)
There operate normally. I hope this has helped
-
Total war Shogun 2 - MV 2005 c ++ redistributable install error 1935.
Hi, hope you're well :)
yesterday I bought total war shogun 2, and then installed steam (installed by using steam game) began a 7 step installation.
On stages was the installation of Microsoft visual c 2005 ++ Redistributable.
The bar stops at about 70% full and then the error message "Error 1935.
An error occurred during the installation of the assembly. ... "I read a lot of FAQ about how to resolve this situation, but nothing helped. I also tried to install manually, but it's the same problem.
I got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.
Thx for the help.
Post edited by: NunoAP
> Got to the point where I wanted to reset the laptop to the factory setting but I got a problem with that too.
I don t know your laptop, but especially you can retrieve the computer laptop initial configuration using disk HARD recovery.
http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htmI don t think its problem of Toshiba so don t think Hat someone would be able to help you here.
Maybe its Microsoft system problem I found this on the MS site:http://goo.GL/SQF9x
-
Original title: MACBOOK PRO 2011
I have a macbook pro in 2011. It has a 2 ghz processor intel core i7. I have bootcamp and want to download a windows operating system to play total war games. My question is what windows operating system is best for this?
Hello
To find out which is the operating system that is recommended for the Total War Games, you may need to contact the administrator of the game. I suggest post you the question in Total War support forums.
Reference:
If the problem persists, you can contact the Sega support for assistance.
Hope this information helps. Response with status so that we can help you.
-
Rome Total war: Barbarian Invasion error missing MSS32.dll
Rome Total war: Barbarian Invasion, I just installed this game on my laptop, but ever time I try to play, said "the program can't start because MSS32." DLL is missing from your computer"can we all help!
Go here:
http://www.dll-files.com/dllindex/dll-files.shtml?mss32
Download the file, copy and paste the DLL in your C:\Windows\System32 and Rome total war folder worked for me
-
Compatibility Windows 7 for Empire Earth 2 and Rome Total War...
I am looking to buy a new computer with Windows 7 home premium and I want to know if he would be able to run Empire Earth 2 or Rome Total War, they both work perfectly on my windows Xp
Hi Yowuhdup23,
Empire Earth 2 and Rome Total War is compatible with Windows 7.
You can check in the Windows 7 Compatibility Center using the link below:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
You can check Rome Total War is compatible with 7 by visiting the link below and you can also check for the version you are using.
I hope this helps!
Thank you, and in what concerns:
Shalini Surana - Microsoft technical support.
Visit our Microsoft answers feedback Forumand let us know what you think. -
I just bought a new laptop Assus with Windows 7 and bought the DVD Empire Total War. I put in disc 1 and click on install. He loads the updates and the steam but then stops and gives me the error message steam.exe (main execption) unable to load library Steam. DLL. I click OK and then install any more. I have de-installed Steam, Steam sent a request for help, got another way to install the Internet, created a Steam user ID and password... Yet, it is still impossible to load the library. Can someone help me? I want fair paly this game and I am ready to kill people to steam. Please tell me an easy way to install this game so I can play?
Try to use a hard - wire to your router configuration and see if that helps.
-
just bought the total war rome and expansion (barbarian invasion) today. I installed the game and expansion on my computer laptop windows 7 and my the family computer that runs on windows xp. on my computer laptop windows 7 installed, gently, but the game will not run at all... which means that I click on the shortcut on the desktop and nothing happens. the only way to open the game is by going to my computer, select the cd drive and then opening the romeTW.exe file.
However, this makes me only to the main menu of the game and this is where the real trouble begins. Once there, I click on "play rome total war" or in the case of the expansion pack 'game barbarian invasion' which instead of leading to the game itself it just crashes me to the menu let me back at the office level.
on the side, I met NONE of these problems on the computer of windows xp from my family.
I tried to make the game compatible with windows xp (service pack 2), which is recommended and Windows xp (service pack 3) I even gave a shot, but none has made a difference.
I now try to uninstall and install the game for a 3rd time and this time I will try to install under xp compatibility. If you could please leave a message instructing me on how to do that would be extremely useful
Thank you
Hi the skins53,
You may be using a Windows 7 64-bit operating system. Rome total war - barbarian invasion is not compatibile with Windows 7 64 bit operating system. However, it is compatible with a 32-bit version. Click here to check.If you use a 32-bit Windows 7, try to right click on the romeTW.exe file and run it as administrator and check what is happening.You can also check the event viewer for any game related errors.See article.Open event viewerI see that you answered in one of my previous answer on the same question. Try these steps as well.Post back with the State.Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Patch Vista for Sega Rome Total War Gold
I loaded Sega Rome Total War Gold on Vista Home Premium. The game crashes. Is there a patch for MS to make the game work on Vista?
Hello
This game isn't compatile with Windows Vista.
See the link below:
Try to install the game in compatibility mode in vista and check if it helps.
See this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
There is no patch from Microsoft for this game.
You can also post this question here for assistance:
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I recently installed a new HD in my mid-2010, MacBook Pro that the original was defective, I then restored from a time Machine up which was recorded on an external drive. My MacBook is now going great but I noticed the problem with how my saved items
-
Safari does not work after update 9.3 on air iPad and iPhone6Plus
Safari will not hurt after update 9.3 on the two air 6Plus and iPhone iPad.
-
Hello I'm about to make the transition from Vista to Ubuntu. As Toshiba offers no support for Linux, I wonder if this means that I have to ask all the drivers necessary + before + I install ubuntu or Ubuntu will automatically install. I saw the post
-
HD 5650 has new Catalyst Control Center 12.4 with 8.95 drivers!
Closed by Sunshine Yes, I was really tired of it anyway.
-
Clear cache in the recovery menu
Hi everyone, hope you enjoyed your weekend. I wanted to wipe the cache memory of the phone because he was almost 3.5 GB (as seen in settings > storage > storage cache) on the 10 GB available for the user in the 16 GB model. For this I followed the gu