MEIDA player does not list the songs on the MP3 CD already inserted in the CD drive

Similar Questions

• Media Player does not recognize the CD drive.

  My windows media player stopped to recognize the CD-RW/DVD drive installed in my laptop Dell Inspiron 8600. I checked the service manager, it says: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). It's a samsung CDRW/DVD SN - 324 s is that the computer was shipped with the original drive?

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Media Player does not recognize the new downloaded songs

  I have a Pavilion a4310f Prod Nr: race AY014AA-ABA, Win 7 Home Premium 64-bit.

  I just found out that Windows Media Player does not recognize the songs, I recently downloaded from Wal-Mart music download Site.  The songs can be seen in the music library in a folder called 'Downloads' and I can open each song and he will play when double-clicked.  The problem is that I can't create a playlist containing the new songs and burn a copy of the reading list, because the songs are not listed in the Media Library Player any hot it is sorted (artist, Album, Genre, etc.).

  Any help/suggestions would be greatly appreciated.

  Mitch

  Problem solved!

  Went to: start == > Control Panel == > troubleshooting == > view all == > and ran troubleshooting on the library and the settings of WMP.

  Convenience store detected library corrupt and "in media files appear in the WMP library.  Then ran convenience store on WMP settings which reset OMP to default settings.  After that, everything worked as announced.

  Thanks to Big_Dave for putting me on the right track.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• No sound in 3g 2 files, error "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

  Original title: cannot get audio from video .3g2 (Windows 7)

  I have a number of videos that were recorded on a Motorola phone to format .3g2, when I played against them in windows XP Pro using what was the most recent media player, they played very well and the audio was present.

  I've since upgraded to Windows 7 Ultimate and have found that videos will play with media player sound is not output.

  I tried different players like VLC (same result, no sound) and came across one called SUPER from erightsoft which indeed works and allows me to re - encode to .wmv BUT when I do and you try to read the .wmv I encounter an error:

  "Windows Media Player cannot play the file. The player does not support the format you are trying to play. »

  When I clikc on help, I am led to a page with links on THIS forum.

  So here I am.

  Can someone explain what is happening, why it happens and how / if I can convert them into a playable (with audio) .wmv friendly format?

  Thank you

  Hi UbinTook,
  
  You found this message from Windows Media Player due to one of the following reasons.
   
  a. you try to play a file that is not supported by the player.
  b. you are trying to play a file that the player does not support, but the file was compressed by using a codec that is not supported by the player.
   
  Step 1:
   
  Confirm that you are trying to play a supported file type. The following article lists the types of files (formats) supported by Windows Media Player.
   
  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992
   
  Note: if you have tried to play the file type is included in this table, the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.
   
  Step 2:
   
  Download the necessary codec to play the file.
   
  For more information of Codec, see: Codec: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11

  Microsoft windows media player does not retain the previous size. is irrtating so me gift of reorganize its size every time when I open it.plz help I want stable wmp version 11, version 12 is sucks.

  Hello, Simone

  I'll assume you're on Windows 7. Windows Media Player 12 is not supported on Windows Vista or XP and as such, you will need to go back to Windows Media Player 11.

  You can check the permissions in the registry to ensure that it is able to record information.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Open the registry editor by clicking on start, type regedit.exe in the search box and press on enter, you may be prompted to continue.

  In the registry editor, navigate to HKEY_CURRENT_USER, Software, Microsoft, MediaPlayer, then Preferences.

  It should be an element named LastLocation_26, right-click on it and select Rename, and rename it to old LastLocation_26.

  Leave the open registry editor and open Media Player, then move it to your favorite place and close Media Player.

  In the registry editor, press F5 on your keyboard and check if LastLocation_26 has been recreated.

  If this is not the case, there is probably a permissions problem.

  If so, the location must be registered.

  Let us know.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player does not open the .tgz files

  Original title: codec .tgz files

  My Windows Media Player does not open the .tgz files

  Hello

  1. what happens when you try to open the .tgz files?

  2. what version of Windows Media Player do you use?

  .tgz file is not supported by Windows Media Player.

  You can use your favorite search engine to download and install the latest codec for Windows Media Player. Subsequently, check if you are able to read .tgz files.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  Reference: information about the types of media files that supports Windows Media Player

  Package of Installation of codec

  Hope the helps of information.

• Media Player does not play the video, only the sound that's a .avi format and when downloaded on fb it played entirely

  the media player does not show the video noise.  Same thing in the power point presentation, I tried to download.  The video plays correctly uploaded on facebook

  It happens with all videos?

  You can download and install ffdhow and check again the question: -.

  http://sourceforge.NET/projects/ffdshow/

  or, you can try VLC Player: -.

  http://www.videolan.org/VLC/

• CD\DVD player does not display the contents of the data DVD.

  CD\DVD player does not display the contents of the data DVD, but will display the content of the data CD.  What is happening on more than one PC, and it began when Active Directory GPOS have been applied for the PC.  If untying policies the problem persists.  What happens on DVD ROM and DVD RAM drives.  Scanning software has been added to these machines, think it might be an ASPI crush.  All these machines are XP SP3 running McAfee.  When you insert a DVD with data on this topic, the name of the drive in windows password DVD RAM drive to CD drive, and if you try and browse the DVD it displays as a blank CD.  I changed something on the PC with the policy but cannot understand what he.  Other identical PC can view the contents of the DVD very well, but they never had the same strategies.  Any ideas, thank you.

  Hi PDoneen,

  The restore of the system; restore the computer to the before date when policies have been launched on one of the affected computer.

  You can check the link for the steps below: how to restore Windows XP to a previous state:http://support.microsoft.com/kb/306084

  Post back with the results.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD player does not read the CD ROM and CD music, DVD works fine

  My HL-DT-ST DVDRAM GSA-H42N DVD and CD player does not read the CD ROM and CD music, DVD works fine

  Hi Anil,

  We recommend that you download and run the Microsoft Fix and check if the problem persists.
  See your CD drive or DVD drive is missing or is not recognized by Windows or other programs

  See also: http://support.microsoft.com/kb/321641

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to display a thumbnail view of pictures? My vista does not list the thumbnails in the dropdown display menu.

  How to display a thumbnail view of pictures?  When I open the folder what I see is a generic panoramic picture rather than individual images.  My vista does not list the thumbnails in the dropdown display menu.  Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.

  Here's a possibility... go to... Start ORB / Control Panel.
  Folder options / tab / files and folders / uncheck
  "Always show icons, never thumbnails" / apply / OK.

• Windows Media Player does not support the codec used to compress the file.

  I can't do some of my videos to play it goes on to say that Windows media player does not support the codec used to compress the file. How can I fix?

  Hello

  What is the file format of the video files you are trying to play in Windows Media Player?

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

   

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Aziz Nadeem - Microsoft Support
  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Lost in car-Windows xp does not recognize the slave drive

  I do reinstall xp home, no problem when I did the system does not recognize the slave drive I have.  As far as I can tell that it's all hooked up correctly.  When I go into disk management it does not recognize the drive either.  All of the suggestions.

  Hi james.williams,

  1. How is the drive connected to the computer?
  2. What is the number of the brand and model of the player?

  I suggest that you check the jumper settings and make sure that the jumpers are correctly positioned.

  Make sure they are in the two master/slave jumper and not cable select.

• Western Digital WD10EARS internal hard drive Caviar Green 1 TB - my system does not recognize the new drive

  I recently bought a computer Dell 4700 to a friend with Windows XP installed. I've updated the memory to 2 GB and now seeks to install a WD10EARS 1 TB harddrive. The new works of fine memory is not the hard drive. My system does not recognize the new drive. I contacted WD for help and they told me to try diferent rider combinations that were Jumper 1-2 and 5-6, still does not work, I checked the hardware compatibility list and he said he would start uo without modification. This isn't. I would be very greatlyful for any suggestions, to HELP!

  I've had several people tried to help me solve my problem. They were all, I thought, more than I am computer savvy. As time progressed, solutions became more complex. After they all left without resolution I thought and it appeared to me that the simplest solution might be correct. One person had checked. I turned on the computer and when the Dell logo came I pushed the F12 key to open the Dell configuration screen. The drive on which the new drive has been installed has NOT been activated! Duh! I activated the he and the program Acronis recognized and everything went like clockwork after that. Phew! What relief! Thank you for your comments I am just glad that my problem it doesn't require resolution. Are Mod

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby