memory consumption very high > 1 GB!

Similar Questions

• Host memory consumption is higher than the comments its use (incl. Cached) and overhead?

  I'm under ESXi 5.1. I don't have any custom reserve configured for memory. I'm running in CVS 'Sandy Bridge' mode.

  I noticed earlier than expected host memory consumed on many of my guests. This example comments running Server R2 2012 with the latest version of VMware tools running.

  VMware reports

  

  The guest operating system reports

  

  My understanding is that the "Standby" and "Modified" on the client contains the ' cache ', and the 'Cached' memory prompt is the typical response to this question that I see when people seek only to the memory of 'In Use'. In my case, I'm factoring in the memory cache, my guest shows 3805 MB of real memory, yet my host shows 7.68 GB of memory consumed host, with only 68 MB of general consumption. According to my calculations, the virtual machine should be only consume about 4.28 GB of memory.

  Post edited by: bradduane Replace the values of text with screenshots.

  I think I found my answer in the guide 'Understanding memory resources management' here: http://www.vmware.com/files/pdf/mem_mgmt_perf_vsphere5.pdf

  Section "when to retrieve memory host" page 15:

  «In the high State, the use of global memory machine virtual comments is smaller than the size of the host memory.» Whether or not the host memory is overcommitted, the hypervisor will not recover memory via hot-air balloon or permutation. (It is true that when the limit memory VM is not set).

  If memory free host down to the low threshold, the hypervisor begins to find the memory using the balloon. Balloon happens before free memory has actually reached the soft threshold because it takes time for the balloon pilot to allocate and PIN memory physics reviews. Usually, the balloon pilot is able to retrieve the memory in a timely order to keep free memory in the host above the soft line. »

  I checked esxtop, pressing "m" for the display of the memory, and I see that hosts VMKMEM shows 'State', so the only memory of way either currently retrieved is by sharing the page. Only when I start to run out of memory of the host, that this State becomes 'soft' or 'hard', balloon or Exchange will be held in order to free the "free" memory of comments. ESXTOP show my 'minfree"than 940 MB, while it shows that I physically 6960MB of free memory.

• C2960-lanbasek9 - tar.150 - 2.SE2.tar high memory consumption

  Hi all

  I would strongly appreciate that someone could explain to me why my Clients-LAN Switches (c2960) during the upgrade to new IOS namely

  rump C2960-lanbasek9 - tar.150 - 2.SE1 and c2960-lanbasek9 - tar.150 - 2.SE2 upward memory consumption to somewhere between 80% and 90%.

  Is there a "bug" always with these IOS versions that could have caused this? I've never had this problem with the old version (c2960-lanbasek9 - tar.150 - 2.SE) of IOS. I've read through the Cisco Documents on these releases but wasn't too sure if new arrivals on these IOSs caused this high memory usage.

  Shown is an example of one of many c2960-switches using these IOSs. In the meantime, I intend to downgrade to c2960-lanbasek9 - tar.150 - 2.SE.

  Looking forward to your answers.

  Kind regards

  James

  

  Hello

  CSCtw83946 Details of bug

  Problems of low memory on the 2960 switches

  Symptom: Use of the high memory on the switch 2960. Without any configuration just a switch box output shows little memory. The available memory is only 5 mb. Conditionsof : No configuration to the output of the switch to the box with 12.2 (58) SE2 image. -See the compilation of statistics of memory- The Total head (b) Used (b) Free (b) Lowest (b) Largest (b) Processor 21586420 16308768 5277652 4527884 5165508 27A7D6C E/S 2 00000 4194304 2464344 1729960 1729960 1718664 1 has 00000 pilot you 1048576 44 1048532 1048532 1048532Workaround: None.This is a physical limitation and this is how far we can go. We should always be able to make configurations, although a large may need an upgrade according to C-comments

  Kind regards
  Alex.
  Please evaluate the useful messages.

• High memory consumption of Developer SQL 3.2.20.09.87

  Hello
  
  I have been using SQL Developer for some time and had initially had problems in the past with memory consuption high when I use this tool.
  I have received and applied the advice from this forum, and while he had helped a little, the majority of high memory consumption remains a problem.
  
  Finally, I had more time to dig around and try to isolate exactly where the problem seems to come from and here's what I found.
  
  (* 1) * I removed functionality updates checking
  (* 2) * I turned it off a lot of the extensions with the exception of Navigator DBA, SQL monitoring in real time, search bar, and extracts.
  (* 3) * when I start a fresh SQL Developer Session and initiate an Oracle application connection consumes about 148 meg RAM fo
  (* 4) * when I opened my Windows Task Manager and watch the memory allocated to SQL Developer, I noticed it goes back to when I move my mouse over the SQL Developer tool and when I run the menu about 5 k a second or so and the memory never came out in the system.
  (* 5) * when I run a great SQL in the memory grid jumps by about 100 meg or more and will continue to do so whenever I repeat the SQL until the SQL Developer consumes about 748 meg of RAM.
  (* 6) * 748 Meg of RAM seems to be the number when the SQL Developer (with an Oracle connection) is more continues to consume more and then not return memory to the system.
  
  Is it possible to have a SQL Developer automatically clear it's using active memory without closing down then restarting him?
  Why SQL Developer continues to consume memory more and more just to move your mouse or navigation in the menus?
  
  Here is my speech in detail;
  
  -----
  
  Oracle SQL Developer 3.2.20.09
  Version 3.2.20.09
  Build a HAND - 09.87
  Copyright © 2005, Oracle 2012. All rights reserved.
  The IDE version: 11.1.1.4.37.59.48
  Product ID: oracle.sqldeveloper
  Product version: 11.2.0.09.87
  
  Version
  -------
  
  Version of the component
  =========     =======
  Java (TM) Platform 1.6.0_35
  Oracle IDE 3.2.20.09.87
  
  Properties
  ----------
  
  Value name
  ====     =====
  awt. Sun.awt.windows.WToolkit Toolkit
  Class.Load.Environment oracle.ide.boot.IdeClassLoadEnvironment
  Class.Load.log.Level CONFIG
  Class.Transfer delegate
  leader. Encoding Cp1252
  leader. Encoding.pkg sun.io
  leader. Separator.
  Fake Ice.Browser.ForceGC
  True Ice.Pilots.html4.ignoreNonGenericFonts
  Ice.Pilots.html4.tileOptThreshold 0
  IDE. True AssertTracingDisabled
  IDE.bootstrap.Start 109707460930968
  IDE. Build HAND - 09.87
  IDE.conf C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
  IDE.config_pathname C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloper.conf
  IDE. Fake DebugBuild
  Fake IDE.devbuild
  sqldeveloper IDE.extension.Search.Path / extensions: jdev / extensions: ide / extensions
  True IDE.firstrun
  IDE.java.MinVersion 1.6.0_04
  3276 ide.launcherProcessId
  IDE.main.Class oracle.ide.boot.IdeLauncher
  IDE.patches.dir ide/lib/patches
  IDE.pref.dir developer C:\Users\twilliams\AppData\Roaming\SQL
  IDE.pref.dir.base C:\Users\twilliams\AppData\Roaming
  IDE. Product oracle.sqldeveloper
  ide.shell.enableFileTypeAssociation C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
  IDE. Splash.Screen splash.gif
  ide.startingArg0 C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin\sqldeveloperW.exe
  IDE.startingcwd C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
  IDE. User.dir developer C:\Users\twilliams\AppData\Roaming\SQL
  IDE. User.dir.var IDE_USER_DIR
  IDE. Work.dir developer C:\Users\twilliams\Documents\SQL
  IDE. Work.dir.base C:\Users\twilliams\Documents
  fake ilog.propagatesPropertyEditors
  Java.awt.graphicsenv sun.awt.Win32GraphicsEnvironment
  Java.awt.PrinterJob sun.awt.windows.WPrinterJob
  Java.class.Path...... \ide\lib\ide-boot.jar
  Java.class.version 50.0
  Java.endorsed.dirs C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\endorsed
  Java.ext.dirs C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\ext; C:\Windows\Sun\Java\lib\ext
  Java.Home C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre
  Java.IO.TMPDIR c:\Temp\
  Java.Library.Path C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\sqldeveloper\bin; C:\Windows\Sun\Java\bin; C:\Windows\System32; C:\Windows; C:\app\twilliams\product\11.2.0\client_3\bin; C:\app\twilliams\product\11.2.0\client_3; C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows\system32\WindowsPowerShell\v1.0\; C:\Program Files\Lenovo\Access Connections\. C:\Program Files\WinMerge; C:\Program logiciels\ ThinkPad;
  Java.naming.Factory.initial oracle.javatools.jndi.LocalInitialContextFactory
  Java.Protocol.Handler.pkgs oracle.jdevimpl.handler
  Java.Runtime.Name Java (TM) SE Runtime Environment
  Java.Runtime.version 1.6.0_35 - b10
  Java.Specification.Name Java Platform API Specification
  Java.Specification.Vendor Sun Microsystems Inc.
  Java.Specification.version 1.6
  Java.util.Logging.config.file logging.conf
  Java.Vendor Sun Microsystems Inc.
  Http://java.sun.com/ Java.Vendor.URL
  Java.Vendor.URL.bug http://java.sun.com/cgi-bin/bugreport.cgi
  Java.version 1.6.0_35
  Java.VM.info mixed mode
  Java.VM.Name machine customer of Java virtual
  Java.VM.Specification.Name specification of Machine Java virtual
  Java.VM.Specification.Vendor Sun Microsystems Inc.
  Java.VM.Specification.version 1.0
  Java.VM.Vendor Sun Microsystems Inc.
  Java.VM.version 20.10 - b01
  JDBC. Driver.Home /C:/app/twilliams/product/11.2.0/client_3/
  JDBC. Library /C:/app/twilliams/product/11.2.0/client_3/jdbc/lib/ojdbc6.jar
  Line.Separator \r\n
  Oracle.Home C:\app\twilliams\product\11.2.0\client_3\sqldeveloper
  true oracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG
  fake oracle.jdbc.mapDateToTimestamp
  of Oracle.translated.locales, are, fr, it, ja, ko, pt_BR, zh_CN, zh_TW
  Oracle.xdkjava.Compatibility.version 9.0.4
  orai18n. Library /C:/app/twilliams/product/11.2.0/client_3/jlib/orai18n.jar
  OS. Arch x 86
  OS. Name Windows 7
  OS.version 6.1
  Path.Separator;
  con reserved_filenames, to the, prn, lpt1, lpt2, lpt3, lpt4, lpt5, lpt6, lpt7, lpt8, lpt9, com1, com2, com3, com4, com5, com6, com7, com8, com9, conin$, conout, conout$
  sqldev. False debug
  Sun.Arch.Data.Model 32
  Sun.Boot.class.Path C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\resources.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\rt.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\sunrsasign.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jsse.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\jce.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\charsets.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\lib\modules\jdk. Boot.jar; C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\classes
  Sun.Boot.Library.Path C:\app\twilliams\product\11.2.0\client_3\sqldeveloper\jdk\jre\bin
  Small Sun.CPU.endian
  Sun.CPU.isalist pentium_pro + pentium mmx + mmx pentium i486 i386 i86 pentium_pro
  Sun.Desktop windows
  Sun.IO.Unicode.Encoding UnicodeLittle
  Fake Sun.Java2D.ddoffscreen
  Sun.JNU.Encoding Cp1252
  Sun.Management.Compiler HotSpot Client compiler
  Sun.OS.patch.Level Service Pack 1
  User.Country U.S.
  User.dir C:\app\twilliams\product\11.2.0\client_3\SQLDEVELOPER\SQLDEVELOPER\BIN
  User.Home-C:\Users\twilliams
  User.language en
  User.Name twilliams
  User.TimeZone America/Los Angeles
  User.Variant
  Windows.Shell.font.Languages
  
  Extensions
  ----------
  
  Name identifier Version status
  ====     ==========     =======     ======
  Check For Updates oracle.ide.webupdate 11.1.1.4.37.59.48 responsible
  Oracle.ide.ceditor 11.1.1.4.37.59.48 code editor in charge
  Charge of the component Palette oracle.ide.palette1 11.1.1.4.37.59.48
  Data Miner oracle.dmt.dataminer 11.2.1.1.09.87 disabled by user
  Support connection to database oracle.jdeveloper.db.connection 11.1.1.4.37.59.48 responsible
  Charge of the object database explorers oracle.ide.db.explorer 11.1.1.4.37.59.48
  Charge of oracle.ide.db of the user interface of database 11.1.1.4.37.59.48
  Schema oracle.diagram framework 11.1.1.4.37.59.48 Loaded
  Diagram of Javadoc Extension oracle.diagram.javadoc 11.1.1.4.37.59.48 Loaded
  Diagram thumbnail oracle.diagram.thumbnail 11.1.1.4.37.59.48 Loaded
  Diff/Merge oracle.ide.diffmerge 11.1.1.4.37.59.48 responsible
  Extended Platform IDE oracle.javacore 11.1.1.4.37.59.48 responsible
  Oracle.IDE.externaltools of external tools 11.1.1.4.37.59.48 responsible
  Support oracle.ide.files 11.1.1.4.37.59.48 Loaded file
  Help oracle.ide.help system 11.1.1.4.37.59.48 Loaded
  Steeped in history oracle.jdeveloper.history Support 11.1.1.4.37.59.48
  Charge of the Import/Export oracle.ide.importexport 11.1.1.4.37.59.48 Support
  Index Migrator support oracle.ideimpl.indexing - migrator 11.1.1.4.37.59.48 Loaded
  JDeveloper Runner oracle.jdeveloper.runner 11.1.1.4.37.59.48 responsible
  JViews record Addin oracle.diagram.registration 11.1.1.4.37.59.48 responsible
  Connect to oracle.ide.log 11.1.1.4.37.59.48 of the Loaded window
  Mac OS X adapter oracle.ideimpl.apple 11.1.1.4.37.59.48 responsible
  Navigator oracle.ide.navigator 11.1.1.4.37.59.48 responsible
  Gallery of the object oracle.ide.gallery 11.1.1.4.37.59.48 responsible
  Oracle IDE oracle.ide 11.1.1.4.37.59.48 responsible
  Oracle SQL Developer oracle.sqldeveloper 11.2.0.09.87 responsible
  Oracle SQL Developer - 3rd party browsers oracle.sqldeveloper.thirdparty.browsers 11.2.0.09.87 Database loaded
  Oracle SQL Developer - APEX listener Administration oracle.sqldeveloper.listener 11.2.0.09.87 responsible
  Oracle SQL Developer - change Mangement oracle.sqldeveloper.em_cm 11.2.0.09.87 responsible
  Oracle SQL Developer - DBA Navigator oracle.sqldeveloper.dbanavigator 11.2.0.09.87 responsible
  Oracle SQL Developer - database oracle.sqldeveloper.dbcart 11.2.0.09.87 basket loaded
  Oracle SQL Developer - Extras oracle.sqldeveloper.extras 11.2.0.09.87 responsible
  Oracle SQL Developer - file Navigator oracle.sqldeveloper.filenavigator 11.2.0.09.87 loaded
  Oracle SQL Developer - missing dependencies of migration Antlr3 translator oracle.sqldeveloper.migration.translation.core_antlr3 11.2.0.09.87: oracle.sqldeveloper.migration
  Oracle SQL Developer - Migration oracle.sqldeveloper.migration.application 11.2.0.09.87 migration applications disabled by user
  Oracle SQL Developer - Migration Core oracle.sqldeveloper.migration 11.2.0.09.87 disabled by user
  Oracle SQL Developer - DB2 migration oracle.sqldeveloper.migration.db2 11.2.0.09.87 disabled by user
  Oracle SQL Developer - missing dependencies of migration DB2 translator oracle.sqldeveloper.migration.translation.db2 11.2.0.09.87: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core_antlr3
  Oracle SQL Developer - Migration Microsoft Access oracle.sqldeveloper.migration.msaccess 11.2.0.09.87 disabled by user
  Oracle SQL Developer - Migration Microsoft SQL Server oracle.sqldeveloper.migration.sqlserver 11.2.0.09.87 disabled by user
  Oracle SQL Developer - Migration MySQL oracle.sqldeveloper.migration.mysql 11.2.0.09.87 disabled by user
  Oracle SQL Developer - Migration Sybase Adaptive Server oracle.sqldeveloper.migration.sybase 11.2.0.09.87 disabled by user
  Oracle SQL Developer - migration T missing dependencies - SQL Translator oracle.sqldeveloper.migration.translation.core 11.2.0.09.87: oracle.sqldeveloper.migration
  Oracle SQL Developer - Migration Teradata oracle.sqldeveloper.migration.teradata 11.2.0.09.87 disabled by user
  Oracle SQL Developer - missing dependencies of migration Teradata SQL Translator oracle.sqldeveloper.migration.translation.teradata_translator 11.2.0.09.87: oracle.sqldeveloper.migration, oracle.sqldeveloper.migration.translation.core
  Oracle SQL Developer - Migration UI oracle.sqldeveloper.migration.translation.gui 11.2.0.09.87 translation disabled by user
  Oracle SQL Developer - Object oracle.sqldeveloper.oviewer 11.2.0.09.87 browser loaded
  Oracle SQL Developer - Real Time SQL Monitoring oracle.sqldeveloper.sqlmonitor 11.2.0.09.87 responsible
  Oracle SQL Developer - reports oracle.sqldeveloper.report 11.2.0.09.87 responsible
  Oracle SQL Developer - oracle.sqldeveloper.scheduler 11.2.0.09.87 Planner disabled by user
  Oracle SQL Developer - schema browser oracle.sqldeveloper.schemabrowser 11.2.0.09.87 responsible
  Oracle SQL Developer - SearchBar oracle.sqldeveloper.searchbar 11.2.0.09.87 responsible
  Oracle SQL Developer - Security oracle.sqldeveloper.security 11.2.0.09.87 disabled by user
  Oracle SQL Developer - extract oracle.sqldeveloper.snippet 11.2.0.09.87 responsible
  Oracle SQL Developer - spatial oracle.sqldeveloper.spatial 11.2.0.09.87 disabled by user
  Oracle SQL Developer - TimesTen oracle.sqldeveloper.timesten 11.2.0.09.87 disabled by user
  Oracle SQL Developer - Tuning oracle.sqldeveloper.tuning 11.2.0.09.87 responsible
  Oracle SQL Developer - Unit Test oracle.sqldeveloper.unit_test 11.2.0.09.87 disabled by user
  Oracle SQL Developer - support to users oracle.sqldeveloper.userextensions 11.2.0.09.87 Extensions loaded
  Oracle SQL Developer - spreadsheet v2 oracle.sqldeveloper.worksheet 11.2.0.09.87 responsible
  Oracle SQL Developer - oracle.sqldeveloper.xmlschema 11.2.0.09.87 XML schema loaded
  Oracle SQL Developer Data Modeling oracle.datamodeler 3.1.4.710 disabled by user
  Data Modeler Oracle SQL Developer - reports oracle.sqldeveloper.datamodeler_reports 11.2.0.09.87 disabled by user
  Debugger oracle.jdeveloper.db.debug.probe 11.1.1.4.37.59.48 Loaded PROBE
  Look oracle.ide.peek 11.1.1.4.37.59.48 responsible
  Storage Oracle.IDE.persistence persistent 11.1.1.4.37.59.48 loaded
  Support for the property inspector oracle.ide.inspector 11.1.1.4.37.59.48
  QuickDiff oracle.ide.quickdiff 11.1.1.4.37.59.48 responsible
  Charge to replace by oracle.ide.replace 11.1.1.4.37.59.48
  Runner oracle.ide.runner 11.1.1.4.37.59.48 load
  THT oracle.ide.vhv 11.1.1.4.37.59.48 responsible
  Versioning Support oracle.jdeveloper.vcs 11.1.1.4.37.59.48 disabled by the user
  Support for versioning for missing dependencies of Subversion oracle.jdeveloper.subversion 11.1.1.4.37.59.48: oracle.jdeveloper.vcs
  Oracle.IDE.VFS of charge virtual filesystem 11.1.1.4.37.59.48
  Browser Web and Proxy oracle.ide.webbrowser 11.1.1.4.37.59.48 responsible
  Load the Extension XML Editing Framework IDE oracle.ide.xmlef 11.1.1.4.37.59.48
  Audit oracle.ide.audit 11.1.1.4.37.59.48 Loaded
  classpath: protocol extension oracle.jdeveloper.classpath 11.1.1.0.0 Manager support
  jdukshare oracle.bm.jdukshare 11.1.1.4.37.59.48 responsible
  MOF - xmi oracle.mof.xmi 11.1.1.4.37.59.48 responsible
  Oracle.IDE.Dependency oracle.ide.dependency 11.1.1.4.37.59.48 responsible
  Oracle.IDE.Indexing oracle.ide.indexing 11.1.1.4.37.59.48 responsible
  Palette2 oracle.ide.palette2 11.1.1.4.37.59.48 responsible
  status oracle.ide.status 11.1.1.4.37.59.48 responsible
  
  
  
  Thanks in advance...
  Tom
  
  Published by: ERPDude on February 28, 2013 14:46

  Hi Tom,

  Memory consumption you observe is characteristic of the machine virtual Java and algorithm of garbage collection that he uses. There are a few tricks you can use to improve the deallocation of memory in the JAVA virtual machine. See the following topics:
  Re: Reduce the footprint memory SQLDeveloper with JDK 1.7
  Re: Memory leak or bad Java Garbage Collector

  In addition, it is best to follow the size of the heap of the JVM and memory via a memory profiler. The Task Manager is supposed to these exaggerate.

  Kind regards
  Gary
  SQL development team

• Utilization ratio of page showing very high in Task Manager and computer file crashes

  Original title: the utilization ratio file page showing very high in the Task Manager and the system is to be hanged, please help!

  Hello

  as I mentioned in the title line that we our office gives problem that it begin to become hunged and at this time, when I open the Task Manager to check the status of performance using Page file shows very high up to 1.5 GB.

  Please suggest!

  Thank you

  Brahmaprakash Mishra

  If the swap file itself grows in fact you may suspect a leak memory by an application, it is called a leak 'Paged', usually, notice increased use of pagefile with an increasing slowness of the machine.  As the demand for 'leaks' or consumes more memory Windows pages pages of the RAM in the swap file, where the name, 'Paged' leaking, leaks memory in the paging file.

  The Task Manager is not a very good job of giving you the 'real' swap file usage, to get use accurate, you can analyze the file with the corresponding Perfmon counter or you
  can use PageFileMon from Doug Knox utility: http://www.dougknox.com/xp/utils/xp_pagefilemon.htm

  Open your task manager and click on the view menu and click Select columns...  Put a check mark on the columns paged and Thread Count.  Keep an eye on these columns over a period of time, showing a constantly growing number likely suspicious process Thread.

  You can monitor these counters with Perfmon, that might be useful:
  Using performance monitor to identify a pool leak

  John

• services.exe memory consumption and therefore 15 minutes to start

  services.exe memory consumption and therefore 15 minutes for bootProblem Description: it seems that since the installation of updated KB973687 my Dell Inspiron 640 m takes an age to start. I am running XP SP3 with all updates installed, have 2 x 512 MB memory installed and the basics of microsoft security is enabled and no virus detected. Run the task on the Startup Manager, I see that services.exe 2 user running objects. Maximum memory use reaches about 500 000 to 600 000 k and the size of the virtual memory increases to more than 2,000, 000 k. Once the VM reached approximately 2 200 000 k it starts to release very slowly and finally reduced to a size of about 6 000 - 7, 000 k, then just a race of user object. It is not until that time where the system becomes usable. What is happening at each startup and lasts about 15 minutes for the system be usable. I have read many articles on this issue, and the other that a clean reinstall which I do not, cannot find a solution. Your help would be greatly appreciated. Operating system: Windows XP

  Your list is very different and much longer than mine. My first thought is that you have the programs loading at startup that might as well load up on request. A useful tool for watching the startup items is Autoruns.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Google search result - report

  http://www.Google.co.UK/search?SourceID=IE7&q=Rarrort+service&RLS=com.Microsoft: en - gb:IE - SearchBox & ie = UTF-8 & oe = UTF-8 & rlz = 1I7ACAW_enGB397GB397 & redir_esc = & ei = mgTwTLvpE4GxhAeUtZSUDA

  Right-click on the report, and then select the graphic Performance. What is the CPU usage and the private bytes. I suspect that you need to know the use during StarUp but for now know how to do this.

  I'm intrigued by the absence of references to other security software. What antivirus, antispyware and firewall do you use?

  Hope this helps, Gerry Cornell

• S10e short life & memory usage too high battery

  Hello

  I bought my computer almost 1 year ago. Now I use of memory very high in Firefox, Safari, Chrome &. Also, my battery only lasts 1.5 hrs. What can I do?

  1 screen capture: http://i45.tinypic.com/2nv8e83.jpg

  Thank you

  Becky

  Hello.. Check your settings in Lenovo Energymanagement...

  You have found my settings for example in the Knowledge Base of Ideapad S series...

  cordially KalvinKlein

• AIR iOS app - how much memory consumption, it's too?

  Hi all

  I have an app focused on Flex AIR that works very well on Android.

  IOS (iPhone 4), it freezes after it worked for a while, and I suspect that the problem is that the application consumes too much memory.

  I'm looking at System.totalMemoryNumber, and it is the statement that the application uses between 17 and 23 MB right until it freezes.

  Is this a lot for an iOS app?

  Is there a better way for me to review/research/diagnose this? I did a lot of research and it does not appear that AIR apps get no warning IOS memory becomes low.

  Thanks in advance!

  Douglas

  Hi all

  I answer at least a part of my own question...

  I created a test application that has added 10K characters in a string on every enterFrame, then he ran until it crashed. He always seems to get up to about 175 MB (as reported by System.totalMemoryNumber) before it crashes.

  This has happened with and without several other applications running in the background.

  As mentioned above, it is on an iPhone 4.

  It seems that my current problem is not caused by excessive memory consumption.

  Douglas

• CPU becomes very high - OS restart automatically - viruses?

  for 3 months, I have a problem with my cpu...
  the use of the cpu suddenly become very high and that's when I have access to the internet...
  the computer is just after this release out of control and the operating system automatically restarts from scratch, why is this?

  Hi Ryad,

  This behavior soiunds looks a lot like the Sasser worm that causes very heavy use of the CPU and causes also the PC restart regularly.

  You need start your computer in safe mode, and then run your antivirus software (I would also like to run your Malware software as well) to try to remove the virus. However, Sasser is not so easy to remove so please also consult the following URL: -.
  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Sasser.removal.tool.html

  Kind regards

• Satellite A660-167 - audio latency very high indeed

  Hello guys.

  I have a Toshiba A660-167 and I'm having a problem with the audio latency, it is actually very high.
  I am using Windows 7 Home premium 64-bit and I already tried using windows 7 32-bit and windows Xp but the problem remains.

  Toshiba already tried to "fix" my problem, but as they said that my laptop works perfectly.
  If someone knows something about the latency problem that his help will be very appreciated...

  Thanks in advance

  Hi dj_betty,

  And how did you notice this problem of DPC latency?
  You have a problem with noise or speakers as low volume or what?

  I must say that my Satellite A660 runs great. I often listen to music with headphones or speakers in-house and have no problem at all. Music and video will be read correctly.

• Qosmio F30-140: Vista stopped and I heard a very high noise

  Hello everyone

  Really, I have a big problem
  My operating system is Windows XP media center 2005 and it is written above (Designed for windows xp, Windows Vista capable)

  2 last week I had installed windows Vista ultimate 32 bit and pilots of the Qosmio, but after 2 days when I worked in Microsoft office Word, the system stopped and I heard a very high noise of it (maybe the processor or fans) but he was really scared and immediately, I turned it of the power button.

  This problem occurred 4 times through this time. I had installed windows xp again from the recovery disk and there is no problem and I installed Windows Vista again hard night but today in the morning the same problem again.

  I don't really know how to fix this and I look forward to receiving help from you.

  Hello

  It s certainly nothing wrong with the firmware Toshiba VAP this nothing to do with your question, you issue sounds more like an overheating problem the OS freezes at a temperature inside the laptop.

  Probably don t cooling modules run a full implementation because of the dust and debris inside the laptop.

  The second reason why a laptop could overheat is the graphics driver installed _non-Toshiba_!

• My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  My screen iphone6 is cracked and in my country, they can only change the iphone with a new one and with a very high price. Is there anyway that I could replace just the screen?

  No, if you want to keep all rights to the service or support from Apple. Not to mention the fact that it then will be bork Touch ID and make the phone unusable if ever, you restore or update of iOS.

  Apple doesn't sell parts of the iPhone. There is no legitimate sources for replacement screens.

• X 1-consumption of high power (> 20W), GPU 100% life time battery, short, fan-noise

  My new X 1 is ideal for grinding through data, but energy consumption seems high when idling or when I do simple tasks.

  I have the BIOS version 1.27 (released October 21, 2011) and Power Manager 3.62

  I have used Power Manager in order to use the value "low energy". However, the power used is always > 20W and usually around 25 - 27W. This translates into excessive heat (so the fan runs at 4500 RPM all the time) and the battery is lasting less than 1 hour if I give a Powerpoint presentation (not movies).

  In addition, the power watch GPU at 100% all the time - Manager is this normal or would it not be a cause of increased tension required?

  I tried all the solutions on fan noise in this thread:

  http://forums.Lenovo.com/T5/X-series-ThinkPad-Laptops/X1-fan-noise/TD-p/469001

  I tried to set all the power settings to maximize independence in Windows 7, and then also in the power manager, but not enjoy. Help, please! What are the normal electrical needs and the GPU % at idle?

  
  

• Very high CPU usage in svchost during playback of an event in a major newspaper of the events using WMI

  Hello

  I have a very high utilization of the processor in the process 'svchost.exe LocalServiceNetworkRestricted' during playback of an event in an event log in Windows 2008 64 SP02 using local or remote WMI.  The same happens using Wbemtest or C++ WMI code.  The use of WbemTest, "Open forum" (identical to one the GetObject of WMI API) read just one of recent events in the event log:

  Win32_NTLogEvent.logfile = "application", recordNumber = 2615657 (in this case, it was the id since the last event in the very large to the Application event log)

  takes 3/4 seconds consuming thant plus 50% of the monitored computer CPU.  This only occurs when the event log is very large (in my case 1 million records), the event log contains about 10000 events just fine.

  The problem is that I read the complete paper in a remote program and this product CPU usage charge too much CPU to the monitored computer.  I do not read the newspaper of the events one by one, but I'm using WQL queries but I do some GetObjects and the peformance is really terrible.

  Any idea what to change or search?

  Best regards

  Jordi

  Hi jordil,.

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  I have Toshiba laptop running Windows XP Professional edition. I have a vertical line on screen ranging from very high to very low. It's about an inch from the right side of the screen. How can I solve this problem?

  Sorry to hear that, but the screen is bad and must be replaced!

  Good luck! Please rate me upward if you find my post helpful. Thank you!