HP2540 all-in-one printer/Scan: wireless connectivity cannot be maintained for printer HP2540

Similar Questions

• HP ENVY 5530 e-all-in-one: printer is not to connect to the Internet wireless

  Hello

  English is my second laungage. hope you understand...

  I can print with printer through windows and Mac PC cable. but, I can not connect between rutour and the wireless printer.

  I used the Setup Wizard and found the SSID name. I typed PW. but "Not connected" is displayed.

  I print the Configuration Page from HP network.

  Live wireless

  Status on

  What else can be done using wireless printer.

  Kind regards

  MI-Ko

  Hello

  If you try to connect your printer to the router, you should make sure that wireless Direct is trurned to offshore. Direct wireless is a feature that allows you to connect a device directly to your printer without router (the printer generates its own wifi)

  Please turn off direct wireless (it's often a button on the front panel) and try to connect again.

  I have included a link below for you rprinter support page that contains the user guides that should help also.

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/model/5304882

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180

  
  

  • Description of the problem - unable to connect to the printer, unless you restart printer
  • -Printer HP Photosmart C3180 all-in-One Printer model
  • (Including service pack revision) operating system - Mac OS X 10.6.2
  • -Wireless connection method
  • Error - could not connect. Photosmart C6100 series (C8897C) is currently unavailable. Please check is it is on and connected, or try again later.
  • Using the latest version of the drivers for HP 2.3 Apple updates and the latest version of the bundled software HP 4.4.3 utilities.

  I was able to solve the problem by reading the comments of others and came across the solution.

  By turning on the printer press and hold keys # and 3 which resets the printer as a warm reboot. Hold the keys down until the main menu appears on the screen (it took awhile so be patient).

  Return to the Mac and remove and re-add the printer via system preferences > printer and faxes (-/ +). However, there is no need to restart the printer twice until it was added back successfully.

• HP wireless all in one printer C410 can get a connection

  I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

  The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son

• HP Officejet 6210xi all-in-one: a HP Officejet 6210xi all-in-one printer can be connected wireless?

  does anyone know if the hp 6210 xi all-in-one can be converted into a wireless printer as well as a wifi network can access and mobile devices?

  Hello

  The HP Officejet 6210xi is one USB printer, it does not offer nay network connectivitu and along such a is not supported.

  You can find the printer specifications below, as listed in section system requirements only a USB port is available for the printer:

  http://support.HP.com/us-en/product/HP-OfficeJet-6200-all-in-one-printer-series/391210/model/391212/document/c00228331#AbT0

  Shlomi

• How do scan you a document from the printer to the computer using a c5180 all-in-one printer

  I try to scan a document to my HP Photosmart C5180 All In One Printer to my computer and like to know what are the steps to do

  Use the HP Solution Center to scan at the printer to the computer.

  HP this documentexplains how to scan with the HP Solution Center. It is very simple to install and use. Mine is configured as a network printer connected to my Linksys router wireless.

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

• Can not scan using Savin 8045 All In One printer/copier/scanner

  Original title - scanning problems

  I connected a Savin 8045 All In One printer/copier/scanner of my Dell Vostro 470 computer via a cat 5 cable and router. It prints wireless and locally but not scan.

  Hi TomMargiot,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  I suggest you to uninstall all in a printer\scanner\copier and install it again and check if it helps.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  If the problem persists, I suggest you to contact the Savin Support for assistance.

  http://www.Savin.com/global/support.aspx

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• cant WiFi connection HP Officejet Pro 8600 e-all-in-one printer to internet

  I can't get WiFi HP Officejet Pro 8600 e-all-in-one printer connect to internet... at least I think that's the problem. I followed all the instructions on the HP print and Scan doctor as well as solve problems of failure to install HP. My router is working fine for everything else and I entered the router the static address for the printer.  It seems that my printer thinks it's connected to my WiFi (Ihave WPS it several times), but when I type there nothing appears in my IE IP address. My router does not see the printer either. I have the latest driver installed on my computer. I suspect that this may be a router problem: new Asus Double 450 Mbps N Router router (dual - band, but it appears my router uses the 2.4 Hz band to connect with WPS). Windows 7 64.

  Any help is appreciated!

  Hello NRHII,

  Welcome to the HP Forums!

  I understand that you are unable to connect the Officejet 8600 via a wireless connection. I will do my best to help you! I would recommend power cycling the router, the printer and the computer:

  (1) turn off your printer
  (2) unplug the power cord at the back of the router
  (3) restart your computer
  (4) wait less than 60 seconds, reconnect the power cord to the router
  (5) turn the printer, wait for the computer to turn on

  The wireless light blinking on your printer? If so, please reconnect the wireless on your printer using the Wireless Setup Wizard: (this information is declared here.)

  1. On the touch screen of the printer, press the right arrow key ( ) to display the second navigation screen.
  2. Tap the Installer icon ( ).
  3. Tap network , tap the wireless configuration wizard , and then press continue . The printer looking for available networks.
  4. Tap the name of your network and then press OK .
  5. If you are prompted, enter the password for the network, and then press OK . The printer connects to the network.

• HP Officejet Pro 8600 more e-all-in-one printer - N911g face 2 of copy or scan on adf?

  I just want to know if HP Officejet Pro 8600 Plus e-all-in-one printer - N911g can do 2 copy or scan on adf faces?

  Thank you.

  Hello

  Based on this, it can:

  Improve productivity in the office with this all-in-one performer who offers vibrant prints and marketing without borders
  materials. You can count on professional color documents for up to 50% lower cost per page per report
  with lasers.1, tap the touch screen to easy-to-navigate to access applications and print from the web without a PC2 - or
  print from virtually anywhere with HP ePrint.3 Boost efficiency in your office with Ethernet and wireless
  connectivity, 4 automatic two-sided printing, an automatic document feeder 50 sheets (ADF) and digitization of glass to the top
  legal - size.5

  Kind regards.

• Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Please follow the instructions below and then tell me what happens.

  First of all, let us make sure that your computer has the latest Windows updates, especially of .net framework, necessary to run many applications and the latest Java.

  I recommend that you use these recommended wireless router settings to get the best communication between the printer and all the computers.

  Unplug the printer.

  Uninstall the printer.

  If you use Windows 7 also try... Driver Manual printer removal

  Restart your computer.

  Download the correct drivers.

  XP/Vista/Windows 7 32 bit drivers

  Drivers 64-bit of Windows XP/Vista/7/8

  Other drivers

  Install the appropriate drivers. You will be asked when connect you your printer (power on). Please make sure that your computer is connected when you install the drivers.

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  If you use Windows 7, use the Vista drivers in compatibility mode.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change the Vista SP2 compatibility. Then right-click on the drivers, on the left, click on run as administrator and follow the instructions on the screen. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  In the digitization, if you have the disc that came with the printer, and then insert the floppy disk to the printer and keep it from running. Go to my computer and double-click it. Locate the drive that contains the disk Dell inside. Right-click on it, left click Explore. Find the folder of the OCR. In the OCR folder, there is a folder of Abbyy. Right click on setup.exe, which is located in the folder Abbyy and left, click Run as administrator. This will install the OCR program.

  Scanning

  Scan using the USB connection, open the Dell all-in-one Center, click on the scan and copy and scan from there.

  Scan wireless, use the buttons to scan on the printer.

  Rick

  How to install Dell v515W on a Mac

  I tried this on my purchased v515W recently, but I guess that it also works with the v515 and other Dell all-in-one printers. I recently bought the v515W for my wife who is a user of Mac, only to find out that Dell has no Mac drivers for it. Somewhere on the Dell site, they have a typo at some point that the Mac drivers are available for the printer. I used my Windows machine to install the printer. After much trial and error, I finally managed to get the printer to work from a Mac wireless.

  1. Configure the printer from a Windows machine
  2. Open System Preferences-> Print & Fax
  3. Click the + to add a printer
  4. Hello will now detect the v515W by the name of the printer
  5. Mac will complain that he could not find the printer driver
  6. Manually select the print driver for 'Lexmark S300 S400 Series' in the search box where you can select the printer

  That's all it took to set up. Hope this helps,

  See you soon,.

  Raj.

• hp2540 all-in-one: print of Samsung3galaxy tablet to 2540 HP all-in-one

  I had a Samsung Galaxy 3 Tablet and I wanted to print tickets, invoices, etc.   I bought a HP 2540 all in one printer but found that I couldn't print.   I don't know what to do.  I need to download an app to take supported printing wireless without router or is there no way I can print Samsung galaxy 3 HP printer

  Hello

  They are on the SAME network?

  • If so, you use Goole Play/store search for HP ePrint app and install on your Samsung.
  • If not: How do you connect your printer now?

  Kind regards.

• HP 6110 All in One printer will not scan to PC applications.

  I have an 6110 all in one printer connected to a HP Pavilion desktop computer running on Vista Home Premium with the MS Office 2007 Suite.  When I try to scan from the printer to MS Word or any other apps, the error message says: "unable to connect to the PC.  However, printing from the PC to the printer works very well and the USB cables are correctly.

  Any ideas?

  Thank you

  ... WSF

  ... WSF

  WSF,

  Can scan you from your pc to the 6110, using the hp scanning software?

• E-all-in-one printer want 5530: wireless set up for jealousy 5530

  Our new HP Envy 5530 printer works very well connected via a USB cable, but cannot be found by trying to set up as a wireless option with either my Lenovo H5 PC (via a Netgear A6200) or a laptop Lenovo W540.

  The printer connects to the same / correct SSID (BT Hub 3.0) and I tried to remove the firewall to see if it was what kept the whole upward.

  Any help would be appreciated.

  Welcome to the community @Matticus HP

  I read your post on how your printer is not detected when you try to set up wireless. I want you to try the steps in the guide below you should get properly connected wireless.

  A 'printer' display the error to the HP ENVY 5530 e-all-in-one and Deskjet Ink Advantage 4510 e-all-in-One Printer Series

  You can also see another thread, that I posted and check your router settings if the guide above did the trick:

  Re: HP 7520 loses connection wi - fi

  Good luck!