Memory controller problem?

Similar Questions

• Satellite Pro A200 - 1 MI - need driver for PCI memory controller

  I have the Toshiba Satellite Pro A200-1 MI (PSAE7E) having a problem with the PCI memory controller on my laptop.
  When I go to Device Manager it shows the question mark in the tab other devices and when I go, it is yellow? (question mark) and! (typical brand) to the PCI memory controller. I took and downloaded all the drivers of your site:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  for XP, but I'm not sure what kind of driver do I need to install for PCI controller memory, it is driver bios or something else? I just need to know what to install to overcome this problem with my device manager and the PCI memory controller.
  Thanks in advance!

  Hello akibono

  I imagine that you have installed Windows XP Home clean on your laptop and now you want to install all the drivers, tools and utilities. Am I right about that?

  In any case, after the installation of Windows XP Home edition you install all the drivers, tools and utilities in the order of the specific facilities. After doing this, everything should be OK and every hardware component will be correctly configured.
  Please install all the stuff as follows:
  WINDOWS XP HOME EDITION
  Driver Chipset
  Display driver
  Audio driver
  Driver modem
  Storage Manager
  LAN driver
  Touchpad driver
  WLAN driver
  Toshiba Assist
  Flash Media driver
  Driver webcam
  Hardware configuration
  Controls
  And so on

  I hope that everything will be OK.

• EliteBook 850 G3: Impossible to install PCI Data Acquisition and processing of Signal or PCI memory controller controller

  Hello

  I just got a new Elitebook 850 G3, it came with a windows 7 x 64 bit CD and App/drivers installation disk, as well as the 8.1 and 10. I was able to update/install all drivers, but PCI Data Acquisition and Signal Processing controller and PCI memory controller. I tried to go to the HP Web site for my product, only 8.1 and 10 x 64 operating system options, a search on the entire SWSETUP folder finds nothing and allowing research on windows update returns no result. I tried the 8.1 drivers, obviously no support for operating system, but wanted to try. Also tried to use the G2 850 drivers with no luck. Has anyone experience this problem? HP has drivers for these 2 devices for Windows 7 x 64? Any help is greatly appreciated!

  I can't seem to find a driver with the hardware ID you posted.

  If I missed something in one of the folders, see if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73137.exe

• Satellite X 200-219 - should I have the PCI memory controller

  As a newbe please excuse my question has been answered before. I tried to find the answer.

  I've updated from Vista Home Premium to Windows 7. Everything seems to be fine except that I still says the memory controller PCI does not install correctly. Toshiba support no more than my machine.

  As the laptop seems to do everything that I need, I need this thing or can I just forget about it? If I need so where can I find a compatible version?

  Thanks in adance for any help.

  As I see your old Satellite is not supported for Win7, so if you can live without it go to Device Manager and disable this piece of hardware.

  Use you the 32 or 64 bit Win7?
  What drivers you have installed so far?

• HP EliteBook 840 G3: Impossible to find acquisition of ICP data and Signal Processing controller, memory controller, PCI and SM...

  Hello

  I can't find acquisition of ICP data and Signal Processing controller, memory controller PCI bus controller SM for HP EliteBook 840 G3 running Microsoft Windows 7 Enterprise (64-bit).

  Any help is greatly appreciated!

  Hello:

  See if this driver works...

  FTP://ftp.HP.com/pub/SoftPaq/sp74001-74500/sp74152.exe

• Memory Allocation problem when using JNI

  For a project, we need to interface Labwindows CVI / Teststand with an application written in Java. We use JNI. The code uses JNI_CreateJavaVM to start a JAVA virtual machine to run the Java interface code. The code did run for quite awhile, but now (without any obvious changes on the side of the CVI or on the coast of Java) JNI_CreateJavaVM will fail with the error-4 code, this means that of the JAVA virtual machine failed to start due to the failure of allocation memory. First investigation shows that even if the Windows Task Manager shows approximately 600 M free physical memory, you can allocate in ICB only about 250 M as a single block at the point where we call JNI_CreateJavaVM. Maybe it's a little less because we have - Xmx192m to the JAVA virtual machine to run our code. Unfortunately just to increase the physical memory of the machine of 1.5 G to 2G doesn't change anything. Free memory space in the Task Manager showed increases, but the memory total block size does not work. Are the trick to optimize the CVI/Teststand who use cases?  Or maybe the problems with JNI?

  Finally, it was a memory fragmentation problem with TestStand. See details/solution here

• POWEREDGE 2800 memory/battery problem

  Hello

  The server DELL POWEREDGE 2800 our company with windows sbs 2003 suddeenly server has restarted yesterday and stuck in the POST gives the error"

  Memory/battery problems were detected.

  The adapter has recovered, but cached data have been lost.

  Press a key to continue. "

  I have three times restarted the server by pressing a button to continue. All three time loading of bones preserved for a long time and restarted the same screen of the error.

  ATLAST I turned off the server and checked for any loose contacts according to the suggestion of dell. I removed the disk 0, 2 HHD, HDD3 in channel one o and replugged in and started the server. Same system has occurred. 1 HARD disc is already failed in RAID 5 and the place so that the disc is empty, I suspected may be another disk HARD in the same row is a failure and so I removed HDD 0 and rebooted the server. the same symptom (2003 loaded and stuck). turned off the server ' reconnected HDD0 and removed HDD2 and restarted the server, but the same symptom.

  Reconnected the HDD 2 and disconnected HDD3 after restarting the server, it gives error loading operating system.

  There are disk HARD 4 and 5 two more hard drive HARD drive in another channel 1

  How to recover from this problem and our secure server data?

  Please help me with this because I'm helpless and the server must be brought im production tomorrow

  Thank you & best regards

  Margot

  If your LCD is blue and you get the error of memory/battery on each startup, then you need to replace memory RAID (99% chance that it is rarely a defective battery or the riser).  The operating system will not usually start in this scenario.

  If your LCD is amber and a message about the scrolling ROMB battery voltage, you should replace the RAID battery (sometimes it's because of riser).  The operating system will usually start and work very well in this scenario.

  First of all, stop playing with readers and replace the memory RAID (and battery and lift to be 100% sure).  Once it is replaced, due to all mixture player you have done, you might have a few steps very careful to recover your data and make your table online.  When you're ready to do this (again, it is useless before repairing the message memory/battery), call Dell technical support - it's always free on servers, regardless of the status of the guarantee.

• Satellite Pro P200-14W and WXP - no driver for PC memory controller

  I installed Windows XP on the Satellite Pro P200-14W and installed all the drivers I could find on the Web of Toshiba site following the instructions provided.

  I always have a controller memory PC that appear in hardware Manager who is not driver related to it.

  My main problem however is that at random intervals (sometimes when you pull the power cable) the defects of the screen and turns into a mess of the desktop computer and the computer must be restarted because it does more. I tried several types of graphics drivers, but this does not stop the problem.

  Any ideas on how to solve this problem would be greatly appreciated.

  If you have installed XP on this laptop Vista you must also update the BIOS to the version of Windows XP.
  Seems that at this time it s a 5.00Win version of the BIOS.

  To get rid of the yellow exclamation mark in Device Manager, you must install the
  Flash Media Driver. This is the driver for your bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  Good bye

• memory day problems post 10.11.6?

  In the last days, safari has been giving me the BBOD, and crashing several times a day. Less critical (but hey, it's a holiday weekend) lies in the fact that I can't play the games (minecraft) because the application continues to run out of memory, despite the fact that I have 32 GB of ram. There is a process of kernel running at the level of the root that starts normally, but then the spikes to use all available memory (less than 2 GB to 18 GB - Yes gigabytes is - and all applications must be suspended at this time).

  Does anyone else have problems of memory after this last update? I don't think it's a coincidence that safari, memory and kernel of processes are involved in updates and my problems, but I am not an expert. Anyone have any ideas?

  I'm running an i - mac 2013 with 3.5 GHz intel core i7:

  

  

  AnneMarie

  < re-titled by host >

  Please download and install EtreCheck from http://etrecheck.com/

  Run it and post the report here.

• Stops at random - memory/battery problem?

  Hello

  I use a Macbook Pro (retina, 13-inch, early 2013) and OS 10.11.3

  Recently I had problems with what I thought it was my battery... The laptop randomly stops (if not connected to the power supply), usually when it is less than 50% charged. When I then connect it to the power and turn it on, my date and time was given to zero on January 1, 2013 or something.

  It becomes more and more difficult to work with, and it seems that the percentage that he dies gets higher. Sometimes I have an error message saying 'Battery of Service', but sometimes that happens and is not at other times. My battery had only 300 cycles, so I'm a bit puzzled as to why this is happening.

  In any case, just to be safe, I ran a test for Apple hardware, and I got this error: 4MEM/61/400000000

  That seems to say that there is a problem with my memory. I don't know if the problems of memory can cause such shut downs, or if it's my battery. I don't really want to take in battery life if she will come out with the same problem.

  Thank you very much for your time and help.

  Please take the computer to the Apple store to have the computer checked.

  The Genius Bar reservation:

  http://www.Apple.com/retail/Geniusbar/

  Best.

• Satellite A660 - 11 M - Memory Upgrade - problem

  Hello world!

  I'm having a problem with upgrading my RAm 4 GB to 8 GB memory ([link crucial 8 GB Kit | http://www.crucial.com/eu/store/mpartspecs.aspx?mtbpoid=28543EEAA5CA7304]) which should be compatible.

  When I turn on the laptop after mounting of the modules to all first all seem to be right and the Bios start, but then it will not load windows and stucks on a black screen.

  Could someone help?

  Thank you!

  Hello

  What to say: it looks like it s a problem with new RAM modules.
  The RAM modules aren t fully compatible or they malfunction.
  You must use other modules I made good experiences with modules from Kingston.

• HP Envy 850-065SE: memory upgrade problem

  HP computer: Envy 850-065SE (memory 4 locations)

  Memory: G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 2 * 16GB

  I just bought 32 GB (2 * 16) G.SKILL RIPJAWS V F4-2133C15D-32GVR DDR4-2133 CL 15-15-15-36 v 1.2 memory to upgrade my HP desktop computer (model 850-065SE of envy). My office has a HP mother 2B3A and i7 - 5820 k and HaswellE chipset. The memory of the plant is of Samsung brand with configuration DDR4-2133.

  When I replaced the memory of samsung (trademark) with G.SKILL ones, the computer cannot start with black screen. When I've switched back to factory memory, the computer is back to normal.

  That means G.SKILL RIPJAWS V 16 GB memoryis is not compatible with this HP computer motherboard? or upgrade the BIOS can solve this problem? or do I return these memory and get 8 GB * 2 instead? Your comments are much appreciated.

  This model is limited to only 4 GB and 8 GB modules in the slot.

  B21 HP

  CL15 - DIMMs, 4 GB, PC4-17000, 798033-001, DDR4 COMPLY_2.07

  CL15 memory - DIMM, 8 GB, PC4-17000, 798034-001, DDR4 COMPLY_2.07

  You can buy online modules of 8GB.  Look at the technical on this point.

  https://www.CDW.com/shop/products/Kingston-DDR4-8-GB-DIMM-288-pin/3912220.aspx#Po

• Satellite L10-117 and memory upgrade problem.

  I installed the module of ram kingston 512 MB dedicated for my laptop and my system does not start. Laptop does not see its partition with windows. I tried to salvage the dvd system and he does ' t help. Recovery is going ok but after restart problem is the same. I also tried to install this memory module 256 MB (factory installed), and then my black LCD screen and the computer won't shut down. Akku only delete help to extinguish.
  I tried all combinations of this module in the memory 1 and 2 location.
  I use 1.8 BIOS and there I see almost empty memory.

  Hello

  If you start the unit with the original just module becomes so everything ok?

• Satellite Pro M30 - NVIDIA graphics controller problem

  Hello everyone

  I have a Toshiba Satellite Pro M30 with a Nvidia GeForce FX graphics controller. ([Image of the motherboard | http://i258.photobucket.com/albums/hh242/hardousss/PC3.jpg])

  My problem is when I turn on the PC and wait a few seconds red and white vertical stripes begins to appear on the LCD and it cannot go after the BIOS password screen. I can type the BIOS password but when I hit OK or button that ENTER the laptop freezes. ([See image 2 | http://i258.photobucket.com/albums/hh242/hardousss/PC2.jpg])

  In very rare occasions where the laptop was turned off for a long time, I listen to him on and he could overcome the BIOS password screen but freezes after a while: ([see Image 3 | http://i258.photobucket.com/albums/hh242/hardousss/PC1.jpg])

  I plugged it to an external monitor and nothing has changed.
  I removed the inverter (responsible for the lightning of the LCD screen) and the problem is still there.

  Always to blame the graphics chip from NVIDIA.
  I read here that it is not possible to replace them because they are soldered to the motherboard. But I want to, where can I get a laptop NVIDIA graphics chip. They sell somewhere?
  I have a friend who works in an electronics manufacturing company (SAGEM) and told me that they have the tools needed to replace any piece on any Board of Directors.

  Thanks in advance for any help.

  Hello, my friend

  I agree with you. It must be a faulty graphics card. I put t believe you can buy a graphics chip separately but you can buy mainboard used laptop on eBay. In my view, Exchange Board is no problem for you.

• Pavilion 14-V015TX: Ethernet controller problem

  I bought a new Pavilion 14-V015TX and I installed a fresh Windows 7 OS. I looked at the wireless and ethernet drivers on the site but the drivers don't seem to work.

  Hardward Ids:

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2280103C & REV_08

  PCI\VEN_10EC & DEV_8136 & SUBSYS_2280103C

  PCI\VEN_10EC & DEV_8136 & CC_020000

  PCI\VEN_10EC & DEV_8136 & CC_0200

  Computer: HP Pavilion Pavilion 14-V015TX

  Windows 7 Ultimate

  Help me please.

  This hardware ID is for the "Realtek PCIe FE Family Controller", then that should be THE DRIVERfor this device.

  This is the wired device.  All the DRIVERS on THIS PAGE should work.  If you're still having problems, then eventually others lack