Memory in Aspire V5-122P-0889
How is it that the laptop has 4 GB of memory, including 3526 MB usable, when there wasn't that one module of memory Kingston 2 GB installed? The motherboard is equipped with a built-in 2 GB module, and everything you put in the single RAM slot is in addition to the built in memory? My laptop is no longe under warranty, so when I installed an SSD I removed the module and he got the info from her. It is a module of Kingston, model # ACR16D3LS1NGG / 2G, which is clearly a 2G module. Same cpu - z indicates the module as being 2048 mb. The kicker is that in cpu - z, on the memory tab, the size la taille shows only 3526 MB. In the SPD tab, it shows only the 1 full size 2048 MB module slot. Nothing in slot 2. Belarc Advisor, it shows DIMM 0 as with 2048MB installed, with a serial number and 1 DIMM with 2048 MB installed, but no serial number. The serial number for the DIMM 0 is for the module of Kingston. Can anyone understand this? As I said, it is that a single slot on the motherboard for a module and the module that it is 2 GB. In all my other PCs in the past, the memory that is displayed is what you have installed. But this laptop has a ghost somewhere 2 GB module. I'm sure that there is a logical explanation for this, and I'm sure that the laptop was actually 4GB (usable 3.52), but where the other 2 GB coming if the module installed, and why is not Belarc shows a second module that is not physically there? Thanks in advance.
I'm not familiar with your machine, but I think there:
A location that can be supported up to 4 GB.
(There is another 2 GB of RAM (DDR3-1066) soldered to the motherboard. It cannot be changed).
Tags: Acer
Similar Questions
-
RAM upgrade for aspire v5-122p-0889
I have an Acer Aspire V5-122P-0889 ultra-thin netbook. It came from the factory with 4 GB of ram DDR3, 204 pins. I can't find information on upgrading the ram. I need to know how much ram is expandable and MHz of SO-DIMM memory modules to get. Does anyone know this information?
That's what I plan to do: revenge CORSAIR 4 GB 204 pin DDR3 SO-DIMM DDR3 1600 (PC3 12800) computer portable single bar. It will work in this phone?
-
Question about refurbished Aspire V5-122P-0889
I have a refurbished Aspire V5-122P-0889 having only a 30 day warranty when I got it. I received it via the eMachines class action floppy drive. Everything good with the computer and it works fine. In fact, I actually upgraded to a Samsung 840 250 GB SSD hard drive. My question is this: I would like to know what it was about this computer that required it to be refurbished. It was a problem and if so, what is the problem, or if it was sent just return within a time limit because someone did not like it. As I said, it works beautifully. I have no complaints, and with the SSD, it is much more dynamic. I'm just curious to know what it was. Anyone have an idea how I could find this information without having to buy a contract of service or pay a fee to speak to someone? Thanks in advance.
I can answer this for you at a high level and I think that is the best answer we can provide on the subject. No information is available as to why a specific unit has been returned and then refurbished. I am sure that Acer internal teams keep data and improve and reduce the performance of the products, but it is not information that I have provided or information that would be shared publicly.
A renovated occurs every time that the device is open, it could be a demo, a loan for revision or a return to a retailer for some reason any.
I hope this helps. I have a Samsung 840 Pro coming today for a my new gaming platform, can't wait to get charge up
-
Question about the Aspire V5-122P-0889 recovery partition...
My recovery partition is 14.82 GB in size, but it has only 95,21 MB of space used. I upgraded to 8.1 Windows through shop Windows, but I highly doubt that it would be wiped out the info in the partition. In addition, this computer is a computer refurbished plant. When I got it it had a warranty of 30 days on this subject. I had because I've included in the eMacines floppy drive class. It does not matter if, as a computer Factory reconditioned, refurbished by Acer, should have the info in the recovery partition, shouldn't it? I am at a loss. I would use the recovery option to reinstall Windows 8 I don't like Windows 8.1, but now I see my only option is to buy the Acer USB recovery, and it comes to $43. It's not just sit well with me. Any ideas? It is refurbished at the factory does not mean it must be defective.
I have a System Image backup when he was still just Windows 8, but cannot me use because it says that I can't use a system image of Windows 8 to restore a computer that has Windows 8.1 on it currently.
I know that I can download a Windows 8 ISO, but only with a product key valid OEM product key is not going to work. Besides, who knows what the product key is anyway, as it is stored in the BIOS. Once again, any ideas? Thanks in advance.
Well, after doing a little research, it turns out that one of the features of Windows 8.1 upgrade wonderful is that this makes it unusable to your recovery partition. I guess this teaches you this in the FAQ on Windows 8 upgrade to 8.1. The only option would have been to make a USB recovery before doing the upgrade, but of course, I did that. As I said, I have an image of Windows 8 of this machine system, but it is useless for me. Of course, my only option is to go there and order USB Acer recovery, then after you have reinstalled Windows 8, uses the saved system image so I can get all my programs without having to re-download everything. Well, $44.95 and some headaches because I didn't read the FAQ and think to make a backup of the appropriate USB recovery. Maybe this lesson will help someone in the future. Such is life.
-
Is anyone else can confirm that they have been able to use/detect than 6 GB of RAM for this model? I just read this and think seriously going to buy a 8 GB key just to see if it works (I already updated to 6 GB of RAM using a 4 GB key I had laying around): http://community.acer.com/t5/Ultra-Thin/Memory-upgrade-in-Aspire-V5-122P-0600/td-p/182251
If someone else can confirm this, it would be a great help! In any case, I can just go buy and try anyway, in which case I'll report my findings.
For what it's worth, I did go out and buy a stick of RAM to 8 GB and the system recognizes all of the 10 GB (less space used for video) - keep in mind I run Linux and not Windows 8/8.1, so I have no idea with Windows would recognize the full amount.
-
What is the model of memory in Aspire V 15 V3-575-7008? I would buy one just like it.
What is the model of memory in Aspire V 15 V3-575-7008? I would buy a 8 GB memory similar to expand to 16 GB. Thanks for help.
Hello
You can find the brand and part number of the original memory with HWINFO portable version (without installation).
Here are the bars of origin:
-
Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P.
Can someone tell me the exact procedure updated the BIOS on an Aspire V5 - 122P. I upgraded from Windows 8.1 for Windows 10. I read somewhere that the upgrade of BIOS ver 2.10 and 2.12 will improve the speed at which it runs. It seems that here are slow running problems with this machine.
I also know enough to know that an executed incorrecly BIOS update can cause a wipe on then, please, if you have done this correctly, please share your experience.
I downloaded the file and the readme says: Windows flash: Please click on "SOBI0210.exe" for updating the bios.
I didn't get this in case it defines something moving that I don't understand.
[subject line changed to reflect the new topic]
Hello
There is nothing special for the update of the BIOS.
Just download the BIOS, make sure that your laptop is plugged in (and also that he above 60% battery in any case), and run the file that you downloaded.
BIOS Acer BIOS 2.12 3.2 MB 24/07/2014 Download -
TV projects "No Signal" when connected to Aspire V5 - 122P
I tried to connect my Aspire V5 - 122P to my Sony Bravia, but it displays 'No Signal'. Since my aspires to only the mini-Display port I tried the following, but still, it does not work:
1 port mini-Display - VGA/HDMI cable
2 port mini-Display - HDMI cable
I hope someone could help me.
PS.
I tried to connect my front Apire to a projector via the port Mini-affichage - VGA cable and it worked fine.
I went to the Service yesterday and had the guys here help me understand what the problem is. We tried several HDMI cables and still we get "No Signal". I tried to replace the screen Mini HDMI adapter that I use and it worked. So the main problem is the adapter.
So for all of you who have problems similar to this, I suggest that you try and test several cables/adapters first.
IronFly thanks for all the suggestions and help that he gave.
Detective Conan.
-
WiFi guard falling on my newly purchased Aspire V5 - 122P
My WiFi guard fall on my Aspire V5 - 122P. I don't know if there is a problem with Windows 8, or if it is a product problem Acer? Any suggestions as to how I can keep a stable WiFi without having to reconnect to the router whenever it falls? Last night, I had to log at least 6 times before I finally gave up and waited until morning to use my desktop (which I now use this type).
Hello...
You can install the new wireless network card driver: http://global-download.acer.com/GDFiles/Driver/Wireless%20LAN/Wireless%20LAN_Atheros_10.0.0.245_W8x6...
Here is the link to download and install the new update to the BIOS: http://global-download.acer.com/GDFiles/BIOS/BIOS/BIOS_Acer_2.08_A_A.zip?acerid=635112704441155009&S...
-
Scalability of memory Acer Aspire V3 - 571 G - 9686
Hello
There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:
SPD EEPROM (DIMM0) information
Manufacturer: ston
Part No.: 56X64D3S13C9G
Serial number: 146718E64C0018E4
Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]
Format: IMM (67.6 x 15)
Size: 2048 MB (ranks 1, 8 banks)
Buffered module: No.
Registered module: No.
Module SLi Ready (EPP): No.
Module XMP: No.
Module XMP 2.0: No.
Width: 64 - bit
Ability of Error Correction (ECC): unspecified
Prefetch buffer: 8 bits
Manufacturing: Week 10, 2012
Temperature probe: no
Heat spreader: Yes
Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz
Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz
TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz
-------------------------
Information SPD EEPROM (DIMM1)
Manufacturer: your technology
Part No.: I1C1674EV
Serial number: 000018E64C0018E4
Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]
Format: IMM (67.6 x 15)
Size: 4096 MB (2 ranks, 8 banks)
Buffered module: No.
Registered module: No.
Module SLi Ready (EPP): No.
Module XMP: No.
Module XMP 2.0: No.
Width: 64 - bit
Ability of Error Correction (ECC): unspecified
Prefetch buffer: 8 bits
Manufacturing: Week 23 of 2012
Temperature probe: no
Heat spreader: Yes
Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz
Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz
TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz
------------------
So, it's a 2 GB module and one 4 GB. Different manufacture.
My question is:
What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?
Thanks in advance for any help.
Kind regards.
Hello
You wrote:
"What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »
In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.
Specifications of aspire V3 - 571 G-9686:
Chipset: Mobile Intel HM77 Express.
Processor: Intel Core i7-3632QM
Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3
You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.
-
Acer Aspire V5 - 122P: Windows 8 Local password recovery or boot from USB
Hello world
Really need help. I fear that I will lose all my data on my hard disk to get my computer working again.
I don't know how, but somehow the password to logon Windows 8 was changed. I can't do anything even if I'm in the advanced recovery options.
I created a USB key to book my V5 Aspire 122P, but I cannot book from the USB key.
I have not created a password reset disk in advance.
I chose the option to rest my pc while keeping my data, but windows 8 still asks for the password and does not accept the password that has always worked for me.
Really scared... If I lose all my data.
Well want to can someone help?
Abrar
I got myself to solve my problem. It would be very useful for someone else, which is why the announcement of the update:
1. first click on the SIFT-restart, I went advanced options and refreshed my pc while keeping my data.
2. This allowed me somehow, in advanced options, I could go to the command prompt without system asking me the password I forgot.
3. once I was in the command prompt, I followed the following steps:
http://pcsupport.about.com/od/Windows-8/a/reset-password-Windows-8.htm
4. I was able to reset my user password.
5. I had to go through installing windows again - not a big problem
6. all my programs have been removed. I had to reinstall them for example MS Office, Cisco VPN Client, Skype, Chrome
7. my data were available under the user name
8. deleted data has been placed in the windows.old directory I was able to easily backup.
So - Thank you God Almight - life is beautiful again.
It will be useful.
Concerning
Abrar
Brussels
Belgium
[private under the leadership of life]
-
Help to choose the upgrade memory for Aspire D270-1401
I had difficulty pinning down the specification of an upgrade memory to 2 GB for my Aspire One D270-1401. Can someone help me decide between PC3-12800 and PC3-8500. It doesn't seem to be any help available for this model on the Acer site.
The model has locations of memory that one alone and it supports DDR3 PC3-12800 unbuffered NON - ECC 1.35v.
Click on the Kudos to say 'Thank you' to help!
-
Upgrade memory Acer Aspire 5552
Hello
I just upgraded to 4 GB of RAM 8 GB on my Aspire 5552. But when I display the properties of the system that it has detected 8.00 GB of RAM, but only 3.74 GB is used. How can I activate the rest of the extra memory I added?
The RAM I installed is accompanied by 8 GB of PC3 - 12800 DDR3 - 1600 RAM, consisting of 2 x 4 GB SODIMM laptop computer Ramaxel.
The RAM in BIOS is showing only 8192 MB total memory with 256 MB of video memory.Acer Tech support advised the following:
1. click on start, type msconfig in the search programs and files, and then click msconfig in the list programs.
2. in the System Configuration window, click Advanced on the start tab.
3 clear the maximum memory check box, and then click OK.
4 restart the computer.
When I checked msconfig memory Maximum option was already unchecked. I tried to check (this is the value of 8192) and reboot, but no change then I unchecked and restarted again, but still only 3.74 GB are available.
Acer technical support are now run out of ideas. Does anyone have any suggestions?
I found the answer...
"" in the start menu > msconfig > boot > advanced > make sure number of cores is 2 you have a dual core processor ' "
I don't know if it was a simple thing that it was assumed that I already knew that, but I didn't and now I do, and I 7.74 GB of memory can be used.
Thanks for all the help.
-
Acer Aspire V5 122p CPU upgrade
Hello, I have an acer aspire laptop touch 122p V5 and want to upgrade the processor to something higher to 2 GHz, but don't know if its possible or what processor to upgrade to. Any help is appreciated! Thank you!
Ray257,
These are the processors we tested on these units, A4-1200, 1250 A4 & A6-1450; looking at literature looks like they could be the limitation as well.
-
I want to know what is the best and most high speed for's aspire it 7741z-4433.
Hello...
Maybe you are looking for
-
I upgraded to WIN 8.1. I am tying to download Firefox, but it will not download. I emptied my cache and restarted the computer.Please notify
-
I check AtoZ, but he won't change, and when I click on "views" once again its modified to return from Z to a... Why it does this in the first place? I don't like what he did.
-
Microsoft Windows Explorer 8 update: KB967715 constantly reinstall OS - Windows XP
I rebooted my computer Dell 4 times and after I reload everything... The Explorer of Windows 8's and automatic updates... The history shows KB967715 as file being properly installed... but after I reboot - windows Explorer 8 automatic update attemp
-
Had problems with Outlook Express. When I send a mail, I get an error message indicating the e-mail was sent not. The e-mail has been sent, but it never leaves the output area. I have to go and delete the e-mail. Then I don't have a folder of e-m
-
Please, how do I replace the drive hard envy 15-k112nl
Hello everyone, I bought this model a few days ago and I would like to replace the hard drive with an SSD, but I can't find any instructions for disassembly.Can you help me? I also add a software problem, whenever you launch the module IGFX not gives