Memory micro SD card > the disk you inserted was not readable by this computer.

Similar Questions

• the disk you inserted was not readable by this computer

  "the disk you inserted is not readable by this computer" appears time to another, even if no disc is loaded...

  That I can not print, but after restart ok, but later it pop! My iMac has OS X El Capitan version 10.11.4.

  Can you help me with a user very amateur?

  Reset the SMC and LANDAU according to the iMac Intel SCM and reset the PRAM.  If the problem persists then if it please post a report EtreCheck on your system, and we can look for obvious problems. To publish the report, click on the link, download the application and run the report. Then copy and paste the report in your reply to this message.

• HP Laserjet P1102 by USB "the disk you inserted is not readable by this computer.

  My HP Laserjet P1102 used to work properly with OS X10.10. Then he started to say (now I'm on osx 10.11.4) "the disk you inserted is not readable by this computer" whenever I have the lit, but the printer still work. What should I do?

  I tried with this solution HP Laserjet P1102w by USB "the disk you inserted is not readable by this computer ' Ec Capitan osx's option"repair disk permissions ".

  I can't say if it will work, and it may even be harmful, possibly to the point of making your mac unbootable, so be careful - all the least have a clone of your system disk. If you start using the internet (Command-Option-R) recovery mode, and if your mac is a model that existed prior to El Capitan, it could be that the disk utility you get in this collection is the old version, including the order of repair permissions.

• iMac G3 Tiger Installation "the disk you inserted is not readable by this computer.

  Hello

  I try to install Mac OS X Tiger on my iMac G3 slot loading 400mH. The system is compatible all I checked before installing. I was able to start on the first disc very well. It is installed properly, until he asked for disc 2. When I put in the disc, it turns a little, and then do absolutely nothing. It just sits there even ask for the disc. After having let it run all night, I decided that the only option was to hold the power button. When I turned the machine back on, it gave me the error "the disk you inserted is not readable by this computer. He then ejected the disc.

  What are my options?

  One thing I forgot to mention, is that I have created these disks under windows with a program called TransMac. It was the first program that I found which could create for Mac bootable discs. The fact that he created the first a perfectly fine leads me to believe that it is not my Windows and Mac computer. I could be completely wrong, and if so what is a better program. I am not of any other Mac other than the G3.

  Thanks in advance!

  Other specifications:

  iMac G3

  400mH

  256 GB RAM

  120 GB disk with Mac OS 9 and OS X Panther (I'm trying to update for Panther)

  Historically, the Mac have trouble starting from system disks burned. As you say, the first one worked, so you might be on the right track. Have you tried to make a new second drive from the same program? Maybe there is a media problem or an engraving error.

  The other problem could be the source of installation of Tiger. Apple has distributed never freely as each copy that you find on the internet - free or paid - are pirated and may even be compromised. It happened more than you think. There are a lot of reports of people for an OSX version here as an internet download and even pay for it, only to find that it works at all. I've seen downloads Mac OS offered for sale even on sites like eBay (I point out them).

  So this begs the following question - where did you Tiger?

  If we get that worked, we ned to continue what I have some experiences with Panther and Tiger on the iMac of the same model which can be useful

• My MacBook Pro shows "the disk you inserted is not readable by this computer.

  After taking my external hard drive WD 2 TB to my best friend for a few days and connecting via USB to its player Samsung Dvd/multimedia, I now have the message above after plugging back on my MacBook Pro. I tried so many difficulties, I found online, but nothing has worked. I even tried to type the command Terminal fix "diskutil repairDisk/dev/disk" and received the message "error repair card: MediaKit reports the wrong partition or no map found (-5324).

  I've seen suggestions of using Disk Warrior, but that seems a little hit and Miss wise success and I can't really afford. This HD were thousands of files on it and was also my Time Machine backup disk. I really want to erase and reformat, but I don't know what else to do! Can anyone help? My MacBook is a model 13 "of 2012 and the HD is a year older. Never had any problem with before this. I realize I should never be plugged on the Samsung device now.

  I eventually found a solution myself. In the case where it happens to someone else, use a program like EaseUS evaluation edition to see if your files are still there and CAN be recovered. After much research, it was clear that the question was a mapping problem caused by plugging the hard drive in the unit of Samsung Media and my MacBook could read is no longer. I ended up using Disk Warrior and it was set to 100% less than an hour. No need to format or restore data to another drive.

  Lesson learned - if you use it on your Mac, connect on something else!

• the disk you inserted is not called by this computer

  Whenever I start the computer, it starts flashing on the screen "the disk you inserted was not called by this computer.

  When I booted into it, it shows me the Macintosh HD. I activated the 'first aid' keys and able to diagnose and the result was ok.

  Is - it my Fusion drive is causing the problem?

  Mr. Chua

  Mr. Chua,

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

• Creating discs of recovery, says "the disk you inserted is not empty", but it is empty

  Windows Vista Home Premium, SP2. HP G60 laptop.

  I (finally) created recovery disks. When I insert a DVD - RW disc, I get an error message: "the disk you inserted is not empty. But it is empty. I tried to use disks formatted and unformatted, but no luck. What to do next? I don't want to try CD, because it'll take 17 of them (against 3 DVDs).

  Thank you

  Hello:

  You might want to try a DVD-R or DVD + R vice a DVD - RW.

  Paul

• Satellite Pro 440 CDT - message "the disk you selected is not ready."

  I have an old Satellite Pro 440 CDT with a CD drive (no floppy more) who plays the music well, but when I type and want to save to a cd, he comes up with the message "the disk you selected is not ready. Can anyone help, because really, I'm not an irritable type and need help.

  I know it as an irrelivent bits to your problem, but I suggest that you invest in a USB key. They are pretty well the replacement disks are much more portable than a CD.

• You cannot connect because the logon method, you use is not allowed on this computer. Please, see your network administrator for more information.

  Whenever I enter my correct password in my windows account it rejects a message and it comes up saying: "you cannot connect because the logon method, you use is not allowed on this computer." See your network administrator for more information. "I can't seem to be able to enable or disable anything because the profile I'm using on my computer is the profile of"Guest ".

  Karima,

  Applicable to Windows 7.

  The following steps require administrator credentials.

  • Use the Windows + R or "Run" in the start menu, then type gpedit.msc.
  • Navigate to Computer Configuration > Windows settings > local policies > user rights assignment > consider all policies "prohibit the newspaper on" to check if your guest account is listed. Remove account from the list, and you should be fine to continue using your guest profile.

  Good luck.

  James

• can not connect because the logon method, you use is not allowed on this computer.

  I have a new computer that is joined to the domain, but in trying to have a user login, I get the following error:

  can not connect because the logon method, you use is not allowed on this computer.

  The only way for him to connect is to change its parameters from the user to the administrator. I tried power users and other options and did not work.

  is there any solution for this?

  Hi Snidera,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• Could not load the LR 6 on my laptop - I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."  I downloaded, from the Adobe Web site and given the serial number when I bought L

  I'll put up a new Macbook Pro the retina, bought this week, and try to install the copy of LR 6 I bought in September 2015.  It is currently loaded on my old Macbook Pro.  I understand that my license allows me to install this on two machines;  This is particularly important now that I move from an old machine to a new one.

  I downloaded the complete file of the LR6, but when I try to install, I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."

  I gave the serial number under my account on the Adobe website and delivered when I bought LR 6 September 2015.

  It is said to "Select a product", but only gives me options of Lightroom 1-5, not 6.  My new LR 6 license is useless just 6 months after purchase?

  I opted to buy 6 LR on perpetual license rather than a subscription monthly CC, as my country's currency is devaluing rapidly and I need to be able to afford access.  But now Adobe does not seem to recognize the validity of the copy that I own.  In fact, it is difficult to find a reference to LR 6 on the Adobe web site.

  Can anyone help?

  Thank you

  It shows the message you have purchased an upgrade license, and it asks you to select the older version that you upgraded and provide older version serial number as proof that you are eligible to use the upgrade.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the ProX1 op

  I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.

  Hi Carl,

  It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:

  See, error: "this serial number is not for a product calling it" | Adobe Creative Suite

  Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• I get the message "serial number you provided is valid, but calling it a product was not found on this computer" when I try and install Acrobat Standard XI

  I have a PC with windows 7 installed.  Reader Acrobat X and XI of Acrobat Pro trial version will work perfectly.  I bought Acrobat Standard XI, and there is a serial number in my account.  Acrobat Standard XI installs fine, but I get the error message after you put my serial number in, 'serial number you provided is valid, but calling it a product was not found on this computer.»

  The message indicates that you have purchased a version upgrade of applications and it asks you to identify the previous version of this application you are upgrading, and then provide serial number.

  If you had no intention to buy a version upgrade then you will probably cancel that and buy it at the price high.

• Try to reinstall 6.1 ELS ' serial number you provided is valid, but calling it a product was not found on this computer. "

  Try to reinstall 6.1 ELS ' serial number you provided is valid, but calling it a product was not found on this computer. "

  I installed from a version upgrade, but I'm recovering from disk crash so I don't have a previous version.

  I know there are way to recover/override as has already happened.

  The installation process is supposed to give you a place to enter your previous serial number if the previous version is not actually on the computer

  https://Accounts.adobe.com/ , then click on Plans & products above for your serial numbers

• Serial number you provided is valid, but calling it a product was not found on this computer

  I try to install LR6.  I have a valid serial number, but during the install process, I get the following: serial number you provided is valid, but calling it a product was not found on this computer.

  Duh! It's because I'm trying to install it on this computer!  How should I proceed from here?  I have a HP Pavilion laptop with Windows 10.  I LR6 installed on my other computer, which is a desktop HP Pavilion on Windows 7, and now I want to install it on my Lap Top.  Can someone explain what is happening here and how to fix?

  you will need serial number of your previous version.  There is no work around.

  There may be ways to recover serial number depending on whether lr5 is currently installed on a computer (old) or you bought lr5 where saved from adobe.