Satellite P10, internal keyboard: the key of the pipe doesn't work anymore

Similar Questions

• Accidentally changed wifi band setting, the wireless doesn't work anymore

  Hello

  So, we just installed a new router and everything was fine.  I had the idea in my head to change the band from 2.4 to 5, then find that my wireless adapter does not support 5.  Thus, the wifi does not work (even if it recognizes the my network shows 4-5 bar signal).  Normally, I would go back and change the setting, but I can't find it anywhere.

  I tried a system restore, but also by browsing my Advanced settings on the card itself, which doesn't seem to have something out there on the change of the band.

  The network adapter is a intel centrio (r) Wireless - N 2230.

  Intel website was completely useless, and their tech support does not meet the phone on weekends.  I'm 99% sure that changing this setting will fix the problem, but I can't.  Help, please!

  This can help

  http://blog.LapTopMag.com/how-to-use-the-5-GHz-band-on-your-router

  2230 N Intel is a single gang adapter and works on the 2.4 GHz ONLY band

• Satellite Pro 6100: no LED at all, the machine doesn't work anymore

  Hi all
  I have two nb, a 6000 and a 6100. Never had any probs with the 6000, but my 6100 gives me a real hard time:
  The battery has been fully charged, when out of nowhere, it froze... had no chance, but power button money to stop, something cut, two green LEDs (which is normal, right?)
  Down the silver power button to restart, nothing.
  Plugged the AC supply (because the battery is fully charged, see above...): all of THE lights is empty, no lights at all.
  Pressing the new button, NO RESPONSE AT ALL, it totally DEAD!

  What could have caused this? What can I do? any help appreciated, thanks.

  very desperate, lionmouth

  Hello

  It seems that there is a hardware error that couldn t be repaired by a biosupdate or something. You will need to bring your machine to a partner of service approved for repair/hardwarecheckup. One of my friends had a similar problem with its 6100 with exactly the same symptoms and his "mother" was defective. But at this time the machine was still in warranty so I Don t know how´s with your mobile phone.

  See you soon

• I can't start with Satellite P10 by pressing the power button more

  I can't start my Satellite P10 by pressing the power button more.
  Sometimes, very rarely its starts when I hold the power button for a while say 10 seconds.

  I tested the power supply and a battery to my friends P10 (of the same type) and both work very well.

  So it must be a problem with the key.
  No idea what to do?

  Thanks for any help

  The best.

  Tobias

  If it s a button or a power supply electronic problem, then you can't do anything.
  In this case assistance by the technicians of laptop would be necessary.

  But the next time that you should try this option if the laptop turns on not;
  Remove the battery and unplug the AC adapter from the laptop for about 30 min.

  After this short period of time to reconnect the two parts and check if the laptop could start.

  Good luck

• CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. The other shortcuts work fine.

  CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. If I go to history > recently closed tabs and click on something, it works, it's just the keyboard shortcut that broke. The other tabs keys work fine.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  If you have problems with activation, go here: find solutions to activation errors that may occur when you launch Adobe apps.

  Click on contact us in the link if you need to reset your activation. It's when you can't access your old computer and you get the activation limit exceeded message.

• Contact with the e-mail inst work anymore, what should I do?

  Publish my site to another host and contact with the e-mail inst work anymore, what should I? =(

  Please refer to the suggestions mentioned in these discussions:

  https://forums.Adobe.com/message/6273486

  https://forums.Adobe.com/thread/1465070

  Thank you

  Sanjit

• Serial number provided with the download doesn't work, now what?

  Serial number provided with the download doesn't work, now what?

  Contact support directly by phone or web chat.

  Mylenium

• the Wacom tablet pressure sensitivity doesn't work anymore

  I have a Tablet Wacom Intuos 3, photoshop CS6 and Windows 7.  I have no idea why, but my Tablet pressure sensitivity doesn't work anymore.  I did a google search to see if others had the same problem on a forum (I can't remember where) I found a solution that seems to have worked for many, so I tried which...  Basically, it says to uninstall my wacom driver, unplug the Tablet, reboot, install driver, plug the Tablet and reset my preferences in photoshop.  I did it last night and it worked, I was very happy, but it was late, was exhausted, so I turned off my computer and went to bed.  When I have it turned on and is gone in photoshop this morning, it does more, pressure sensitivity is gone again.  I get this warning in my brush settings when I try to put it on pen pressure, angle or another setting requiring sensitivity to pressure, but it does not tell me how to fix it.  Is the only way I can make the process work I mentionned (pilot program is uninstalled, disconnect the Tablet, reboot etc.) but I would need to do whenever I have shut down my computer and it's a bit of a pain...  I have also tried installing different drivers, the last being first of all, when this does not work I tried older to see if that would make a difference without success...

  Any help would be greatly appreciated!  I'm starting to feel a little desperate...

  I read your post and found nothing which contradicts my statements.  But we looked at these questions several times - and this kind of problem is due to the driver or hardware.

  Yes, if you do not know the code or API involved, you may jump to the wrong conclusions.

  But I know what all is involved (and the fact that Adobe applications share not compressed code) and have sat and debugged these questions several times that I can remember.

  Please follow with Wacom to determine the problem with your drivers or tablet.

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Satellite P10 - repair on the recovery disc option

  My Satellite P10 crashed, which suggests an error of hard disk may be imminent, I have a recovery disk, but it doesn't have a repair option, only a full recovery. As I would like to try to retrieve some data, is there a repair option, normally associated with these discs.
  If yes where can I get one?

  Thank you

  Recovery disc has no repair option. Recovery disk contains only the recovery image. Try to get the facilities of Microsoft CD and use the fix here. If you will not be able to repair the operating system pre-installed as a last option, you can use the recovery disk and install recovery image.

  Bye and good luck!

• Satellite P10: Question about the limits of upgrade of RAM and HARD drive

  What are the limits to upgrade my laptop Satellite P10? Currently, I use 1 GB of RAM (2 x 512) and I still have the original 60 GB 4200 RPM HARD drive. I'm mainly interested in upgrading my hard drive to at least get a 7200 RPM 100 GB disc. Better would be one of the ones 24 hours server as Hitachi HTE721010G9AT00, I have just turned off my computer. Which one to take and are there limits (BIOS) (keeping in mind that there will be 200 and even the 250 GB drives next year)?

  RAM: should I put two 200pin SO-DIMM 333 or 533 or should not change at all as it works very well and stabil now?

  Hello

  In my eyes you should follow the guidance of Toshiba line and must use the memory modules that are recommended in the user guide. But if you can also try to test with 400 Mhz or 533 Mhz. I think that each dealer notebook or memory could do that.

  I think the BIOS might be able to handle the hard drive with capacity of 30 GB / 40 GB / 60 GB / 80 GB, Bus Master IDE with ultra DMA 100 synchronous
  In my opinion the BIOS does not recognize the larger HARD drive.