Merge command

Similar Questions

• Copy and update data from one table to the new table by using the Merge command

  Hello
  
  Can someone tell me please how to do this?
  I have a table: EMP (ename, sal, empno (pk), dept) another table is EMP_CLASS ((pk) empno, ename)
  
  I want to insert corresponding lines of emp to table emp_class if this line does'nt exists in emp_class
  otherwise it will be update info by corrsponding emp_class table as well as remove of emp_class according to the emp delete operation.
  
  
  
  
  
  
  Thank you
  Madam.
  
  Published by: Nico on August 12, 2010 22:59

  Have changed. PLS, run once more...

  MERGE INTO emp_class
  With the HELP of emp
  WE (emp.empno = emp_class.empno)
  WHEN MATCHED THEN
  UPDATE
  SET emp_class.ename = emp.ename,
  emp_class. DEPTNO = emp.deptno,
  emp_class. Class = decode(emp.deptno,10,1,20,2,30,3,40,4)
  DELETE
  WHERE emp_class.empno = emp.empno
  WHEN NOT MATCHED THEN
  INSERT (emp_class.empno, emp_class.name, emp_class.deptno, emp_class.class)
  VALUES (emp.empno, emp.ename, emp.deptno, decode(deptno,10,1,20,2,30,3,40,4));

  P.S. Not tested

  Thank you
  Florian...

  Published by: Florian on August 13, 2010 01:53

• using the MERGE command

  Hi all
  I have the table with the name ac_supp_shed_main with columns supp_id, supp_name, delflag, net_amount, clear_amount, balance_amount
  and a view named as view_supplier_dues.
  
  I am retriving some specific lines to form the view_supplier_dues view and insert these specific lines in ac_supp_shed_main of a grid designed forms to oracle 10g with check_box control.
  
  When check out some of the specific records it will insert in this table.
  I have a procedure written in forms to load the data in the grid, if certain documents are inserted into this table prviously, then these files are coming up with checking these boxes in the grid.
  
  My requirment is that if I am again you want to insert those verified records then these documents delflag value 'y' and registers
  are not present in the table to insert in this table
  
  I am writing in order to merge 10g oracle forms for this
  -------------------------------------------------------------------------------------
  merge into ac_supp_shed_main
  using (select count (*) from v_count
  from view_supplier_dues where bill_no = 12345 and bill_date ='01 - May - 2010 "(et supp_id = 345 and delflag = ' n ')"
  When matched then
  Update ac_supp_shed_main set delflag = 'y '.
  When not matched then
  insert into ac_supp_shed_main
  (supp_id, supp_name, bill_no, bil_date, delflag)
  values (234, "aunt stell Ltd.", 2323, 10-May-2010 ',' only)
  It's show error MERGE online...
  I give the example here.
  
  Please give me one to achieve any solution...

  It's show error MERGE online.

  ERROR? What is the error? I see no error?

  Please be aware that we do not have your tables & we do not have your data.
  Therefore, we can run, test, or improve your SQL posted.

  ALWAYS
  View the name of the operating system (OS) & version for DB Server System.
  View the results of
  SELECT * from version $ v
  or post the Oracle version with 4 decimals

  When everything has failed, read the Fine Manual
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14200/statements_9016.htm#i2081218

  Published by: sb92075 on May 29, 2010 10:14

• Problem in the merge command

  When I tried to run this identifier not valid to B.DEPTNO
  
  merge into dept3 b
  using c dept
  on (b.DEPTNO = c.DEPTNO)
  When matched then
  setting a day of set b.DEPTNO = b.DEPTNO,
  b.DNAME = b.dname,
  b.loc = b.loc,
  b.Country_ID = b.Country_ID
  When not matched then
  Insert the values(c.DEPTNO,c.DNAME,c.LOC,c.COUNTRY_ID);

  Shiv kumar says:
  In fact it has been in front of mistakely, same problem
  merge into dept3 b
  using c dept
  on (b.DEPTNO = c.DEPTNO)
  When matched then
  setting a day of set b.DEPTNO = c.DEPTNO,
  b.DNAME = c.dname,
  b.loc = c.loc,
  b.Country_ID = c.Country_ID
  When not matched then
  Insert the values(c.DEPTNO,c.DNAME,c.LOC,c.COUNTRY_ID);

  The closer you get on (b.DEPTNO = c.DEPTNO) and updates the same as b.DEPTNO = c.DEPTNO set

  Why?

• Merge command does not not PS CS6: 48 file or file missing error / line: 46-> $.evalFile (g_StackScriptFolderPath "StackSupport.jsx")

  Running updated iMac with NIK plugins.  Exactly the same software works fine on my MacBook Pro. Any ideas for the fix?

  You seem to have deleted the necessary script files, or use scripts to a different version of Photoshop files (and it is the support necessary missing files).

  You can probably fix it by copying the entire folder settings presets/scripts of the copy that works (but make sure you copy all the third-party scripts may have installed).

• URGENT: Photoshop CC 2015 ERROR *: unable to complete the auto-merge layers command because there is not enough memory

  

  I recently downloaded Adobe CC 2015... Face serious problems with the PS when I try to superimpose images.

  
  

  Here are the steps I followed:

  1. file-> Scripts-> battery files

  2. five selected. CR2 files (average size 28 MB)

  3. click on Ok

  4. once photoshop has completed her treatment, selected layers and Edit-> auto-merge the layers-> stack of Images

  Please note that I followed the same steps in converting the CR2s in JPEG... same error result

  Error result

  PS throw up a dialog error: could not complete the automatic Layer Merge command because there is not enough memory

  Expected result

  Photoshop must accomplish the task of auto-merge layers

  Details of the information system

  Here is the report system in case it is useful

  Information system writes to report: 29/11/15 13:23

  Name of the operating system Microsoft Windows 7 Professional

  Version 6.1.7601 Service Pack 1 Build 7601

  System model Inspiron 5520

  System Type X 86-based PC

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  A14 BIOS Version/Date Dell Inc., 13/05/2013

  SMBIOS Version 2.7

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  The time zone India standard time

  Physical memory (RAM) installed 8.00 GB

  2.39 GB total physical memory

  1.26 GB available physical memory

  4.77 GB total virtual memory

  2.92 GB available virtual memory

  2.39 GB page file space

  Name	GPU Intel(r) HD 4000
  Adapter type	Compatible with Intel(r) HD Graphics Family, Advanced Micro Devices, Inc.
  Description of the adapter	GPU Intel(r) HD 4000
  RAM card	1.01 GB (1,080,743,936 bytes)
  Driver version	8.951.9.1000
  Name	AMD Radeon HD M 7670
  Adapter type	Card compatible (0 x 6840) ATI graphics, Advanced Micro Devices, Inc.
  Description of the adapter	AMD Radeon HD M 7670
  RAM card	1.00 GB (1 073 741 824 bytes)
  Drivers installed	aticfx32.dll, aticfx32.dll, aticfx32.dll, atiumdag.dll, atidxx32.dll, atiumdva.cap
  Driver version	8.951.9.1000

  I guess the real problem here is the drive working, not RAM. They both found messages 'insufficient memory '.

  Historically, Photoshop has always been remarkably well with large files and little RAM. Excess data which cannot be held in RAM are written to the drive to work, and even if it slows down things considerably, it really requires a lot to run Photoshop to a complete stop.

  Of course, you must move to a 64-bit version of Windows. As it is, Photoshop can use less than 2 of your installed 8 GB of RAM. It's not much, but do not attempt to allocate more than 70% in the PS preferences. Process of the operating system and other applications need RAM too. Allowance too will choke the rest of your system and send it to pimples without end-of-file exchange.

• Merge documents Word w / Applescript

  I write a MS Word document with contributions from several authors and publishers. I'm new Applescript, but I invested a few days now trying to figure out how to create an application that should merge several word documents. I use Microsoft Word for Mac Version 15.15 on a Mid 2011 iMac OS X El Capitan 10.11.12 running. I'm hung up on how to use the merge command in the Script Editor. From only two documents, I write things like:

                tell application "Microsoft Word"

  name of the file Open ((path to the folder on the desktop) & "TestingMerge.docx") as string

  myMerge of name of the file to Merge the value ((path to the folder on the desktop) & "TestingMerge2.docx") as string

                end say

  I get an error message:

  Result:

  error "Microsoft Word has been an error: can not continue merger." number-1708

  I did a lot of variations on this general topic, but just don't know how to use the command merge correctly or there is a weird bug that broke this command. I looked everywhere for code applescript from someone who has used the merge command to see how the syntax and format is supposed to look like, but I have not found anything.

  Any help would be appreciated.

  Hello

  You must specify a document open and a file with the command merge path.

  In the Microsoft WordApplescript dictionary:

  fusion v : merges the changes marked with revision of one document to the other marks.

  Merge document

  file name text: the path and the name of the document to merge with this document.

  a file1 set to (path to the folder on the desktop as text) & "TestingMerge.docx".

  the value File2 (path to the folder on the desktop as text) & "TestingMerge2.docx".

  Tell application "Microsoft Word"

  the value of thisDoc1 to open the file name file1

  Merge thisDoc1 file name File2

  tell the end

• With the help of Merge for Update, Insert, Update and also to delete outdated records

  Hi all!!!
  
  Suppose that a credit memo the following table called Orders:
  

  ORDERID        STATUS      PRICE 
  ---------- ---------- ---------- 
           1          0        100 
           2          0        200 
           3          0        300 
           4          0        350 
           5          0        390

  In addition, there are a procedure that will generate data on a global temporary table, called Orders_Temp. This temporary table will be used to update the Orders table. + commands + have a trigger that will perform different operations when an Insert, Update, or Delete command is executed.
  
  Consider the table of Orders_Temp to have the following data after you run a procedure that is responsible for the update of order data:
  

  ORDERID        STATUS      PRICE 
  ---------- ---------- ---------- 
           1          1        100 
           2          2        200 
           3          0        300 
           5          0        390 
           6          0        350

  As you can see, orders 1 and 2 have been updated. Order 3 and 5 were intact, order 4 has been deleted and command 6 inserted. Fusion will take care of properly manage orders 1, 2, 3, 5 and 6, although producing an update of order 3 and 5, which have not changed.
  
  So, here are the questions:
  (1) how could remove the 4 arrestedorder, as this order was not present on Orders_Temp? Is it possible to use the merge command to do this?
  (2) is it possible to generates not a update operation for orders of 3 and 5, which have not changed?
  
  I m using Oracle 10.2 SE.
  
  Thank you very much!
  Regis

  Hello

  Please try this. Not tested! with 9i. I think you can do this by using the union all.

  MERGE INTO orders tgt
   USING (SELECT A.*, 1 mask
            FROM orders_temp A
          UNION ALL
          SELECT A.*, 0
            FROM orders A
           WHERE NOT EXISTS
                   (SELECT 1
                      FROM orders_temp b
                     WHERE A.order_id = b.order_id)) src
      ON (tgt.order_id = src.order_id)
  WHEN MATCHED
  THEN
    UPDATE SET tgt.status = src.status, tgt.price = src.price
       WHERE src.mask = 1
         AND tgt.status != src.status
         AND tgt.price != src.price
    DELETE
       WHERE src.mask = 0
  WHEN NOT MATCHED
  THEN
    INSERT VALUES (src.order_id, src.status, src.price)
  

  or you could try to use a full outer join and treat NULL values.
  G.

  Edited by: g. March 8, 2011 11:17

  changed to the Union all the

• Question on MERGE in inside a stored procedure?

  Hello people,
  I have this procedure who did a MERGE command inside the procedure and, basically, all this is it inserts all the data from the temporary table when there is no match on the Bill_ID.
  Here, my requirement is on a daily basis than the Bill_ID that can be assigned to a different Event_ID. If for example the Bill_ID has changed his event tomorrow the procedure should update the row with the new Event_ID. But in my procedure this is not kept up-to-date because the Bill_ID has not changed and it is the same thing (coz uses MERGE insert when not matched). How to achieve on a daily basis. What is the cornerstone of the code to do this. Am a bit new to programming and am trying to learn.
  
  

  CREATE OR REPLACE PROCEDURE load_fadm_staging_area_test (
    p_data_load_date DATE
  ) IS
    v_start_date   DATE;
    v_end_date     DATE;
  BEGIN
    SELECT NVL (p_data_load_date, SYSDATE) - 7,
           NVL (p_data_load_date, SYSDATE) - 1
    INTO   v_start_date,
           v_end_date
    FROM   DUAL;
   
    MERGE INTO stg_fadm_hri_stage_bill_test b
    USING      (SELECT *
                FROM   stage_bill
                WHERE  created_date BETWEEN v_start_date AND v_end_date) a
    ON         (b.bill_id = a.bill_id,)
    WHEN NOT MATCHED THEN
      INSERT     (batch_id,
                  beginning_service_date,
                  bill_id,
                  bill_method,
                  bill_number,
                  bill_received_date,
                  bill_status,
                  bill_type,
                  change_oltp_by,
                  change_oltp_date,
                  client_datafeed_code,
                  client_id,
                  created_date,
                  date_of_incident,
                  date_paid,
                  deleted_oltp_by,
                  deleted_oltp_date,
                  duplicate_bill,
                  ending_service_date,
                  event_case_id,
                  event_id,
                  from_oltp_by,
                  oltp_bill_status,
                  review_status,
                  row_effective_date,
                  row_end_date
                 )
      VALUES     (a.batch_id,
                  a.beginning_service_date,
                  a.bill_id,
                  a.bill_method,
                  a.bill_number,
                  a.bill_received_date,
                  a.bill_status,
                  a.bill_type,
                  a.change_oltp_by,
                  a.change_oltp_date,
                  a.client_datafeed_code,
                  a.client_id,
                  a.created_date,
                  a.date_of_incident,
                  a.date_paid,
                  a.deleted_oltp_by,
                  a.deleted_oltp_date,
                  a.duplicate_bill,
                  a.ending_service_date,
                  a.event_case_id,
                  a.event_id,
                  a.from_oltp_by,
                  a.oltp_bill_status,
                  a.review_status,
                  v_start_date,
                  v_end_date
                 );
  END load_fadm_staging_area_test;

  Published by: user11961230 on January 26, 2011 09:36

  user11961230 wrote:
  Hi John,.
  Sorry for the confusion I think I got your point of NVL. Last question would be, now the Row_Effective_Date and Row_End_Date columns are out in the v_start_date and the v_end_date is to say sysdate-7 and sysdate-1.
  If the procedure is executed on a daily basis, then I want to update these columns Row_Effective_Date, Row_End_Date with the dates of every day. How to get there? How to include this code? Thanks for all the help.

  Just add them to the list updated.

  WHEN MATCHED THEN UPDATE
     SET b.event_id = a.event_id,
         b.row_effective_date = v_start_date,
         b.row_end_date = v_end_date,
     WHERE b.event_id != a.event_id;
  

  If you want to update all the (in other words, each corresponding line), then remove the predicate event_id. If you only want to update those that have changed and then leave it in. You could also update them to stage_bill.create_date by using this field instead of variables.

  John

• [CS4] [JS] Merge cells in a table?

  Hello world!

  I make small script to apply a group of commands in the text. I select text, transformation to Table paragraph style applies styles (table and cell styles) and unfortunatelly each line in a separate cell. I need to do everything in a single cell only.

  How can I do this? Help, please.

  This is the script:

  myText = app.selection [0] .appliedParagraphStyle = "Norma DO."
  myText = app.selection [0];
  myTable = myText.convertToTable ("\t", "\r"),
  myTable.appliedTableStyle = "DOU".
  myTable.cells.itemByRange(0,-1).appliedCellStyle = "Cell DOU";
  myTable.cells.itemByRange(0,-1).clearCellStyleOverrides;
  myTable.cells.Merge;

  This last line does not work, gives an error.

  Thank you.

  Wagner

  myTable.cells.Merge is not a valid Javascript command - for various reasons.

  First of all, the Merge command is not a valid function on cells. You probably meant "merge".

  Then, the merger does not work on 'cells' - an array of cells. Instead, it runs on either a single cell (and you have to tell with what other cells to merge), or a collection of cells.

  Finally, since it is a function, it needs a pair of parentheses.

  If this does work:

  myTable.cells.itemByRange(0,-1).merge ();

  Specify a collection to merge, or, Alternatively,.

  myTable.cells.firstItem () .merge (myTable.cells.lastItem ());

  saying to merge all of the first cell to the last cell.

• Action "Copy merged" disabled?

  Hi, I have read these forums often, but this is my first post.

  I'm dabbling with Photoshop integration in Dreamweaver CS4. I am referring to a tutorial that I found online here. I am using the function copy merged in Photoshop and it is dimmed and does not allow me to perform the action, and I can't understand why. I tried selecting each layer indidvually, all 3 together and got nothing.

  I guess that's a few quick easy fix a few settings that I need to have enabled, but I can't understand it.

  Any help?

  Merged copy needs a selection. Select all copy them (A Command) - merged (command shift C). You must also ensure that the RGB composite is selected

• Draw freehand on the container to Image Vision - are part of the Image

  Hello people.

  You want to do a random draw on the fly on a 8-bit grayscale image into a container of Vision.  I then want to merge this draw with the actual image.  I suppose that the draw is an overlay.  Vision has a superposition of merge command that requires RGB destination.  I then used the IMAQ extracted SingleColorPlane to extract the plan of the intensity of the RGB image so that I can return to the plan format unique (U8) use IMAQ ImagetoArray fx to get to a table.  I tried to extract a number of different types of aircraft, but do not see my line on the resulting table (which I display in a graph of intensity).  I don't see the original image.

  Any thoughts on the best way to accomplish a merger of the draw and the original image?

  Thank you

  Don

  I write an example showing my current best effort quick a solution non-Vision, not covered with this problem. This approach was mentioned in my previous post.  I will cross-post this in the forum LabVIEW also since it is a solution of pure-LabVIEW.  It is difficult for me to believe that we can not directly to these "overlay" information using NI Vision NI LabVIEW.

  After the line drawn for all positions of the cursor (cursor) feather flying over the interpolation is required. I used the factor 10 and spline interpolation.

  Drawing of the points on the graph of the intensity, rather than lines, did not work well, because with my code, I'm clearing missing events related to seize all slider positions.

  Feel free to let me know if you can do better.

  Sincerely,

  Don

• opener restoring default zip file

  I downloaded the "zipfix_vista" registry repair and tried to merge following the instructions and just opened in Notepad.  What I'm doing wrong or should do next?  He recorded on my download folder and I right click their get the merge command.

  Hello, Help, I need somebody,

  Where did you downloaded the zipfix_vista. file of?
  They give instructions after you download the file?
  You are connected to your desktop with an administrator account?

  I delete your current file and then download and save the new file on your desktop.
  Once on your desktop, if you right click you see Merge option at the top of the list? If so, then right click and select merge again.

  If this does not work, you may need to check with the person who wrote the merge file.
  I would also check that you have selected the right file for your operating system.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to record various forms drawn to a layer in Photoshop?

  I have a title card that I designed in Photoshop (CS6) and I have a small clock dial that I drew with a variety of forms. Each point on the clock, as well as the hands, are on a different layer.

  

  For my project, I need to merge the dial of a clock with the word "contemporaneity" on the same layer and I tried merging all layers in various form, but the option was not available (command + E, I have a Mac). How can I put all the pieces of the clock on a single layer?

  In addition, the image must be transparent (However for visibility, I put a layer of temporary black background), and I found that the face of the clock, as well as one of the hands of the clock have a black outline thin around it. I don't know what this is, as it's not having a stroke around it that is visible.

  

  Is it possible that I can solve this problem? Thank you!

  Yes, it's another way to multiple layers of selection. The problem is that you did have only one layer selected and PS passed to a merge command down to the shortcut Cmd + E.

  Even easier with as many layers as you: note that, in my screenshots above, there is a command to merge the visible layers (Cmd + Shift + E).

  Just check to see what's visible first!

• Load metadata

  Hi gurus,

  I'm on 11.1.2.3 and using contour load utility to extract and load the metadata.

  Extraction of metadata has been successful for Classic and EPMA application. But loading of metadata is effective only for Classic and fails for applications of EPMA.

  He tried different servers, but face the same question. Tried in both web interface and also by running the batch file.

  Please let me know if you have encountered this problem.

  No argument comes from a properties file.

  Command line arguments: D:Version X:LoadExcep1.exp S: /A:PBF * /L:Loadlog1.log U:admin /I:E:\R\OTL\Load.csv

  Subject (merged) command line:

  D:version X:LoadExcep1.exp A:PBF /S:ServerXXX /L:Loadlog1.log U:admin /I:E:\R\OTL\Load.csv

  [Game 18 dec 19:24:35 IST 2014] Connected application "PBF", liberation 11.123, adapter Interface Version 5, supported and not enabled workforce, CapEx no taken care and not active, CSS Version 3

  [Game 18 dec 19:24:35 IST 2014] Input file located and opened successfully "E:\R\OTL\Load.csv".

  [Game 18 dec 19:24:35 IST 2014] Input file is read with the UTF-8 encoding.

  [Game 18 dec 19:24:35 IST 2014] Detected a UTF-8 BOM marker in the input file "E:\R\OTL\Load.csv".

  [Game 18 dec 19:24:35 IST 2014] Record header fields: Version, Parent, Alias: by default, data storage, calculation of pass two, Description, formula, UDA, Smart List, Type of data, Type of hierarchy, process management enabled, Version Type, aggregation (Plan1)

  [Game 18 dec 19:24:35 IST 2014] Find and use the dimension 'Version' to load the data into the application "PBF.

  [Game 18 dec 19:24:35 IST 2014] HspOutlineLoad::dateFormatSpecified is set to false, SessionHalDateFormat stored on session: null, sessionId: 49044143

  [Game 18 dec 19:24:36 IST 2014] Error loading of data record 2: work, Version, store, false, unspecified, none, true, bottom-up, ~: java.lang.RuntimeException: Fetch of registered member doesn't have a 'job '.

  [Game 18 dec 19:24:36 IST 2014] Loading dimension 'Version' has been successfully opened.

  [Game 18 dec 19:24:36 IST 2014] A refresh of the cube operation will not be run.

  [Game 18 dec 19:24:36 IST 2014] Create filters for safe operation will not be performed.

  [Game 18 dec 19:24:36 IST 2014] Look at the files of newspapers of Essbase to status if Essbase data have been loaded.

  Planning of vector data store finished loading processes. 1 record of data has been read, 1 data sheet was treated, 0 were accepted for loading (check the actual load with Essbase logs), 1 was rejected.

  [Game 18 dec 19:24:36 IST 2014] Planning of vector data store finished loading processes. 1 record of data has been read, 1 data sheet was treated, 0 were accepted for loading (check the actual load with Essbase logs), 1 was rejected.

  Thank you

  RN.

  Well you can not use OutlineLoad for application EPMA. (It allows you to extract well) As simple as that

  Concerning

  Celvin Kattookaran