Merge forms by pushing together?
Is this possible in Illustrator to push and pull shapes and when they do they contact automatically merge?
StrongBeaver wrote:
The document's CMYK, basically what I'm after is based on the zoom level, adjust the size of brush, unless there is an option that I'm on?
Request a feature.
Tags: Illustrator
Similar Questions
-
Remove transparency and merging forms.
Hello
I don't know how to explain it... So I'll use the visuals!
Currently my image looks like this with a lot of transparent space between the two. But I want to get rid of the differences between the two and merge each 'form' next to each other...
Like this (please look below... I've grouped only half of the image together just to show what I want)
It is easy to choose the negative space between the images with the selection tool, but is at - he of the shortcuts to group shapes side by side without doing it manually? I have about 100 of them to do - so any advice would be greatly appreciated!
Thank you very much!
I think I might know what went wrong. I did not go in that leaders must be in pixels. You can set your rulers to pixels or add this line after line of photoshop #target:
app.preferences.rulerUnits = Units.PIXELS;
-
Is it possible to merge shapes in photoshop, but maintain the losless scalability?
Hello
If the shapes are on the same layer, select the path Selection (A) tool and select the paths, make sure to add them to the form area is selected (first button to leave the Group of 4) and select "Mix" in the options bar.
If the forms are not on the same layer, open the path alongside the layers panel.
Select the layer with the number of the form 1 and double-click it in the path Panel, it creates a path. While the path is targeted, do a select all, copy (Ctrl + A, Ctrl + C)
Select the layer with the number 2 of the form and highlight its vector mask. Dough. Repeat for all forms, until you have a vector mask with each of them.
Make sure that all paths are selected on the image with the path Selection tool and combine them.
I hope that this explanation is quite clear!
-
How "merge" several duplicate layers together to make a single image?
How "merge" several duplicate layers in the same image, (each of them with a number painted on it) in an image, which shows all the numbers separated, that is are coalition? Believe me, I tried all means to do, but nothing helps, I just can't 'merge' into a single image. Help, please! I use Photoshop cc with windows 7.
Select all layers, and then press ctrl-alt-shift-e. This will create a composite of all layers, leaving your only originals.
Each layer must have a mask or pixels removed to create a transparent box that allows to display the image in the next layer below and so on. This must be done before you create the composite.
-
Hello, is it possible that I can combine the 2 forms and also to keep the two colors? When I do by Illustrator pathfinder merges the colors as well... I have 2 items with different colors and I want colors remain separated even if it s a merged form
chris46343546 wrote:
and the development team has the icons in the svg file an object...
Group them. Then you get a superior object with 2 sub objects.
And please let them explain in detail why they can not handle multiple objects. Maybe they want to apply some colorization?
-
Merger of Livecycle form into 1 PDF file
Can someone tell me please how to merge into a single PDF Livecycle forms! When I merge forms only the last form has to generate data.
Unfortunately, I don't think you can do this with CF. IIRC, forms are flattened when you perform a merge. CF not allowing the flattening of LiveCycle forms (licensing reasons...), this is probably why you end up with one or more blank forms. You can complete the forms LiveCycle of CF, but flattening is only possible with LiveCycle.
Post edited by: == cfSearching == -.
-
What will happen if I merge my file folders x 86 program on another hard drive?
I have three hard drives in my PC and you want to combine the files Program Files x 86 starting from the following locations to a folder on the third hard disk.
Total size
C: drive is a SSD 128 GB with Windows 7 64 bit installed. Readers (with Windows XP installed) D: and F: are each 500 GB HARD drive at 7200 RPM drives.Former locations
C:\Windows.old\Program files (x 86): since a Windows XP install before
C:\Program Files (x 86): Windows 7
D:\Program Files (x 86): Windows XP hard driveLocation to move to
F:\Program files (x 86): backup unit to consolidate/merge files ofMy question is: what happens if I merged all the files together into one and delete the files from their current location, other than maybe broken shortcuts?
Only (x 86) C:\Program is really active, unless since the last installation of Windows, you actually told an installer of programs to use one of the other locations, they are irrelevant.
Move the folder C:\Program (x 86) only is not simple and not supported as defined in the registry. If you want to reduce the size of the folder, you will have to reinstall applications and where they plan a custom installation option use to set somewhere else.
-
I created a PDF form to a customer. The form was sent by e-mail to a group of people, supplemented by themselves and emailed back. I have combined all completed in a single PDF forms, and the combined PDF has been posted on their web site.
The client has made this comment:
"Next time I want to a project only on the web more dynamic and socially networked."
Can someone clarify what the customer meant by that?
Is it possible to do what that customer wants using a PDF form or would be something different necessary?
The data is the same, whether by e-mail or web script. If you are using a secure server, so you are able to have better control the security of the form and the data (especially if personal data or photos are included). With the FDF Toolkit or other processes, you can manage the data that is sent (no need to send the PDF just as data can be imported to the form to get the same result). I'm not familiar with sending photos, this is apparently a new feature and may not work with earlier versions of Acrobat or Reader. Maybe it's you want to put the result in a totally different format of PDF files, but merge together in a more useful way that does not include what you would have with the form input, and others. In addition, when you merge forms you must flatten first so the data does not get jumbled.
OK, a response vague, but I think that the essence is there.
-
HI people,
I have serched the knowledge base, but can't find a definitive answer.
The wife and I have our own computers laptops (MacBook Pro and MacBook Air). We buy a family iMac now children need to use a computer for school.
The question is how we merge our 2 computers together on 1? Just use assistant Migration twice? We want to be done with Applications, 1 library system folder 1 folder and our 2 user accounts distinct (we can add child accounts after).
Kind regards
Adam
Just, use The Migration Wizard and migrate only users you want from each computer.
You can migrate a system/settings of one of the computers folder and then migrate only the user account from the other
-
Push BlackBerry: Application accessories server-side
Hi all
I want to know the application requirements on the server side.
- I have a few Notifications in my application.
- My application to retrieve some webservices data after a specific interval or manual traction (update).
- These data are in the form of JSON, I have to analyze and then use it to display the notification to my application.
- Now, if I change the 'Blackberry Push Notifications' draw, what changes should I make to the coast server.
- If I'm right, I'll have to make an application Java server-side. Besides, this application will contact My Web services to extract the required data. After obtaining the data, this application will push data (along the device PIN who need push Notification to be sent) PPG by configuring Push service SDK.
"Please erase me if I'm wrong.."
Uptill I did :
- I'm registered for Push Notification by completing the evaluation form to push Blackberry. And waiting for response from the RIM.
- Downloaded the SDK of Service Push v1.1.0 and installed successfully.
as I have already said, push a short message and allow the client to remove the data.
Push is to inform, not necessarily to put all the data on the device. -
Smartphones blackBerry PUSH CONTENT IN the CACHE
It won't hurt anything to remove the pushed content... many users have no content pushed, which often takes the form of "pushed" messages from a supplier of weather, the news agency or sport...
-
fusion of forms in question please help
I have a problem: when I tried to merge forms into one with pathfinder, I lost part of the mountain... Please help me. How can I merge without losing?Make transparent traces on the forms of mountain before using 'unit '.
-
Hi, I'm trying to design a logo in Illustrator CC which has overlapping shapes, and I need to remove the part of a shape so another form is in front.
I used Pathfinder to achieve before with basic shapes, see here... I used the blue oval on the right to cut the blue on the left:
Now I'm doing the same thing with a more complex form, this yin yang:
But it won't allow me to cut! Instead, when I apply this technique, it deletes the entire black shape.
It's what happens immediately when I choose less first plan:
The only difference that I know is that the yin yang was a bunch of forms, I joined together using the form generator tool. BUT, I've experimented with few blue forms and it worked with those:
I am so helpless.
My ultimate goal is to make this look like the cat holds the ball to his leg. I don't like how I do if someone has a better technique! Please...
simbastudios,
Go, which will prevent problems with the features/nostrokes, could be:
(1) create a copy of the paw (band), lock the original and move the copy to the front very (Ctrl / Cmd + C + X + F);
(2) cut the party more to the left between the pads with the ScissorstTool, remove the left and Ctrl / Cmd + J to close the other way pad;
(3) group all the trim paths and change their hunger to black;
(4) also select the ball and in the dialog box transparency palette click the opacity with Clip mask and mask Invert checked.
(5) release the original path of Paw (band).
After 2) you can also use Pathfinder and:
(3) select the ball and the copy paths and Pathfinder paw > less prior;
(4) release the original path of Paw (band).
Not a little cat.
-
Exclude, merge, divide, subtract... where did these features?
Since the update to the latest version of Photoshop CC, maybe I'm just overlooking it, but I can't find the buttons (which have been located by the alignment tools) where you can merge, subtract, divide, exclude, (not sure if I'm away from the other) two or more forms. Please help it will be greatly appreciated!
Make sure that they are part of the same layer. If they are not, select the forms desired in the layers panel, then right-click > merge forms. After that, use operations as before. (Make sure that the forms desired in this layer are selected).
-
Please, help me to by merging the same id assining people
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
Please help me
We_addr_id defines the Address. We_pid Defines the Person. i am planning to merge the same person together by assigining the same we_pid.WITH merge_names AS (SELECT 1000 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, 'L' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 1001 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, 'LARRY' middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 1002 We_pid, 999898989 We_addr_id, 'DONALD' first_name, 'BOATRIGHT' last_name, NULL middle_name, NULL Suffix FROM DUAL UNION ALL SELECT 33065 WE_PID, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, NULL middle_name, NULL suffix FROM DUAL UNION ALL SELECT 8450527 WE_PID_LINK, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, 'A' middle_name, NULL suffix FROM DUAL UNION ALL SELECT 373453429 WE_PID_LINK, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, NULL middle_name, NULL suffix FROM DUAL UNION ALL SELECT 442303062 WE_PID, 99000000 We_addr_id, 'LUNA' First_name, 'JOSE' last_name, 'S' middle_name, NULL suffix FROM DUAL UNION ALL SELECT 30088775765 WE_PID, 990000878 We_addr_id, 'BILL' last_name, 'RAY' first_name, 'M' middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775766 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775767 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, 'MAX' middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 30088775768 WE_PID, 990000878 We_addr_id, 'RAY' first_name, 'BILL' last_name, 'MICHEL' middle_name, NULL SUffix FROM DUAL UNION ALL SELECT 399998776 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, NULL middle_name, NULL SUFFIX FROM DUAL UNION ALL SELECT 399998777 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'J' middle_name, 'JR' SUFFIX FROM DUAL UNION ALL SELECT 399998778 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'JAMES' middle_name, 'SR' SUFFIX FROM DUAL UNION ALL SELECT 399998779 WE_PID, 9901111 We_addr_id, 'ELLISON' first_name, 'LAWRANCE' last_name, 'JACK' middle_name, 'JR' SUFFIX FROM DUAL) SELECT * FROM merge_names
Thank youo/p Required WE_PID WE_ADDR_ID FIRST_NAME LAST_NAME MIDDLE_NAME SUFFIX MERGE_WEPID 1000 999898989 DONALD BOATRIGHT L 1000 1001 999898989 DONALD BOATRIGHT LARRY 1000 1002 999898989 DONALD BOATRIGHT 1000 33065 99000000 LUNA JOSE 33065 8450527 99000000 LUNA JOSE A 8450527 373453429 99000000 LUNA JOSE 33065 442303062 99000000 LUNA JOSE S 442303062 30088775765 990000878 BILL RAY M 30088775765 30088775766 990000878 RAY BILL 30088775766 30088775767 990000878 RAY BILL MAX 30088775767 30088775768 990000878 RAY BILL MICHEL 30088775768 399998776 9901111 ELLISON LAWRANCE 399998776 399998777 9901111 ELLISON LAWRANCE J JR 399998777 399998778 9901111 ELLISON LAWRANCE JAMES SR 399998778 399998779 9901111 ELLISON LAWRANCE JACK JR 399998777Hello
Interesting problem!
That's what you asked for:
WITH got_min_we_pid AS ( SELECT merge_names.* , MIN (we_pid) OVER ( PARTITION BY first_name , last_name , middle_name , suffix ) AS min_we_pid FROM merge_names ) , possible_matches AS ( SELECT CONNECT_BY_ROOT min_we_pid AS min_we_pid , we_pid AS leaf_we_pid FROM got_min_we_pid WHERE CONNECT_BY_ISLEAF = 1 START WITH we_pid = min_we_pid CONNECT BY first_name = PRIOR first_name AND last_name = PRIOR last_name AND SUBSTR ( 'x' || middle_name , 1 , LENGTH ('x' || PRIOR middle_name) ) = 'x' || PRIOR middle_name AND 'x' || middle_name > 'x' || PRIOR middle_name AND 'x' || suffix = 'x' || PRIOR suffix ) , got_match_cnt AS ( SELECT DISTINCT min_we_pid , leaf_we_pid , COUNT (DISTINCT leaf_we_pid) OVER (PARTITION BY min_we_pid) AS match_cnt FROM possible_matches ) SELECT c.* , NVL (p.leaf_we_pid, c.min_we_pid) AS merge_wepid FROM GOT_MIN_we_pid c LEFT OUTER JOIN got_match_cnt p ON p.min_we_pid = c.min_we_pid AND p.match_cnt = 1 ORDER BY c.last_name , c.first_name , c.middle_name ;Here's how it works:
First of all, we take care of the exact replica, by finding the we_pid lowest for each group defined by (first_name, last_name, middle_name, suffix). For example, the two lines for Jose Luna (no middle name) are assigned to the min_we_pid = 33065. It is this min_we_pid, not the original we_pid, that is used in all future operations.
Then we are all names other names that are similar, but more comprehensive, using a CONNECT BY (subquery possible_matches) query. The parents in this query are stored with short middle_names, and children are lines that have first_name, last_name identical and suffix, but middle_names longer. I concatenated the x at the beginning of all middle_names for comparisons, to treat the NULL as being less at, but similar to something else. Is so, that we had a group of lines with identical names (and suffixes) with the exception of the middle_names, then
NULL middle_name might be a parent got ', "DEB" and "DEBORAH",.
A ' would be a parent of "DEB" and "DEBORAH", and
"DEB" would be a parent of 'DEBORAH '.
By following this chart until we find the lines that have no children, we may associate each short middle_name with the similar longer middle_name, or names. At this point, we will have "BILL RAY" as the ancestor of 'RAY MAX BILL' as well as "RAY MICHEL BILL". Here comes the following subquery, got_match_cnt. If notes how many descendants are associated with each ancesotor, in other words, how much longer names might match a name more runs. If this number is greater than 1, we do not consider one of the matches. That is why match_cnt = 1 is one of the join conditions in the main query, where each row in the theoriginale table is related to its more relative, when it exists, and if it is unique.
Maybe you are looking for
-
values of band slider min max avg
Is it possible to isolate statistical quantities of a set of data (specifically to the search for medium and minimum maximum) via the cursor to tape and to display these values IN the display of the 2011 tiara (IE without the data from markup, make a
-
Change order of project folder
It is perhaps a silly question, but is there a way to rearrange the order in which the folders appear in a tree view of your project? It seems by default what CVI has them in order of "Files of User Interface", "Source Files", of"Include files", whi
-
How to remove the skin on windows media player: windows vista running windows 9
Well, I wanted a new skin on windows media player, I went to the site of the skin and got a new skin. Then, the player only plays not write. You cannot see the controls as fast forword or rewind play or pause. It makes me crazy ha ha wow. can
-
Hello world. We have the Ironport following in our network: UDI: S170 V03 FTX1632M0AAName: S170Description: Cisco IronPort S170Product: Cisco IronPort Web Security Appliance S170Model: S170Version: 7.5.2 - 303 The Director told me that he gets the fo
-
It can be re-enabled on Windows 7 Ultimate OEM license?
You just gave me a version of OEM Windows 7 Ultimate for Christmas. I know that once installed it is locked on the computer (motherboard). If I need to do a reinstall on the same computer in the future, can I re-activate my license without any proble