Merger of not recognizing the CD.

Similar Questions

• Satellite A30-514: BIOS is not recognizing the CD/DVD or HARD drive

  Hi I'm having a little trouble with my Toshiba Satellite A30 friends. The hard drive died recently, and the cd tray was damaged.
  I found an exact replacement unit and we have a new hard drive, but the Bios is not recognizing the hard drive or Cd/DVD unit.

  I installed Windows Me via my own laptop and boot from the hard drive of the computer's hard disk, but it still does not recognize the DVD even if Windows does, and it is fully operational.

  This prevents me to install windows XP, the operating system it is. If anyone can help, I'd be much obliged, too, I flashed the bios with V1.80.

  Hello

  It is the first time I heard about this issue. The Bios doesn't recognize the drive but Windows is possible use it t.
  Why suggest that peut t BIOS recognizes the drive? Is it not possible to boot from the drive?
  Check if the IDE controller is enabled and the Boot section. The CD/DVD drive should be selected and activated.

• MacBook Pro not recognizing the Cougar USB install

  I have a Macbook Pro 5.2-17 "retina display. I replaced the hard drive and I am installing Mountain Lion. The hard drive is not an SSD. It's a 500 GiB Western Digital SATA, partitioned with TPG and JHFS +.

  I started by installing El Capitan, because that's all I had. The installer of El Capitan is on an external USB drive that is partitioned. When I boot using the down Option key, the C key or command-R, the installer of El Capitan is recognized. I installed El Capitan, created an installer of Mountain Lion on a different partition on the same external USB drive and erased El Capitan the internal hard drive. When I boot on the USB setup of Mountain Lion is not recognized. Setup of El Capitan is recognized correctly. Why not available in boot manager during startup? When I got El Capitan installed, the two partitions have been recognized very well when I plugged in the USB. Both were mounted and appears on the desktop. So I know that the problem is not the USB key, or 2.0 or 3.0, or the recovery partition because I erased the disc and the recovery partition is no longer exist. How can I get the installer of Mountain Lion to be recognized at startup?

  I did the command Option P R, NVRAM reset several times. No joy. The only partition recognized at boot time is the installer of El Capitan.

  I want to level back to Mountain Lion because it is less intrusive than El Capitan and will be more familiar to the person who will use this computer.

  Oh, and more than two elements. When I start the installer for OS X from the external USB drive, I gives me three options on where to install TO - install OS X El Capitan, install OS X Lion mountain and Macintosh HD. Therefore the partition setup of Mountain Lion is recognized, but not as an installer to start from. Although when I plugged in the USB port when El Capitan was installed he showed as an installer Mountain Lion.

  Also, there is NO option to choose where to install FROM. If I have two installation programs, I have two choices of installation?

• My HP 14 laptop is not recognizing the usb ports and wifi at startup.

  During the last few days I been dealing with the issue that my laptop does not recognize the usb ports and wifi. After several reboots, it works fine. My drivers are up to date, so I don't know why, I'll have this terrible problem.

  Welcome @hildergarn,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi and USB ports on your laptop from HP.

  My first suggestion would be to use the wireless network troubleshooting and Internet tool. At the bottom it will ask you questions to help you diagnose the problem.

  Please take a look at this great Charter called troubleshooting wireless network and Internet. This document will help you to solve the problem of Wi - Fi.

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  You have uninstalled the driver in Device Manager?

  Please try to uninstall the driver in Device Manager by using the following steps:

  • Go to the Device Manager.
  • Expand network adapters.
  • Right-click on all NICs individually.
  • Click on uninstall.
  • Restart the laptop twice.

  How many devices you try to connect?

  What you are trying to connect via USB?

  Are - what you happened to try to use the HP Support Assistant?

  Here is a link to the HP Support Assistant, if you not him have not yet tried. Simply download and run the application and it will help with the software and drivers on your system that need updated.

  Here are other troubleshooting steps that may help too. If the USB device does not appear in Device Manager, then it might be a question of power requirement. Unplug the machine and perform the following steps until the device is detected:

  • Reboot the laptop

  • Plug in and wait five seconds.

  • If the device does not appear, try connecting to another USB port.

  • If the USB device is displayed in Device Manager after you connect the cable to a different port, then uninstall and reinstall the software of USB device driver.

  If the device is not recognized in any port, unplug it and go to the next step.

  • Open the Device Manager.

  • Double-click Bus USB controllers,

  • Double-click on a USB root hub,

  • Click the Power tab

  • Click on properties of power supply (if it is displayed).

  Devices need that are connected to the hub are shown, as well as the power they have. If the total displayed power is more than 500 mA, remove the devices and use a hub powered.

  • Continue looking at the properties of the power of each USB hub. If the total power required exceeds the total available power for the hub, then remove a device on this hub to a decrease in the number of consumption.

  • Plug in and wait five seconds. If the device is not recognized, unplug and go to the next step.

  Please note; Remove USB cables at high speed that are more than 3 m (9.8 ft) in length and use cables at high speed that are shorter than 3 m.

  Source: troubleshooting USB connections - please look at this document and follow all the steps in it.

  When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you do not want to show your appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If please re-post and let me know the detailed results of all the troubleshooting steps in this post. Could you please provide me with your model number (How can I find my model number or product number?) also.

  Can't wait to hear from you!

  Have a great day!

• Satellite 1800 is not recognizing the hard drive of 80G

  I recently bought a store and save 2500 80 external to free up hard drive space on my laptop. Deliberately, I bought a disc that was backward compatible with my USB 1.1 (assuming) ports. When I plug it in, the external drive turns on and it beeps constantly but is not recognized by my PC. I tried the drive in a desktop computer and it works fine - so were excluded from the unit malfunctions. I uninstalled the USB drives and re-installed, etc, but no luck.

  Any ideas of what I can do?

  What form factor is this player 'record and store? It's a 3.5 "or a smaller as 2.5"? And how the HARD drive is powered? With two USB connectors or an external AC adapter?

  It would be useful to know some information about everything that solve your problem.

  Welcome them

• in error like sqlplus is not recognized the command

  Hi all
  I want to connect through the Cmd from windows.
  
  as
  C:\ > sqlplus
  gives error
  "sqlplus" is not recognized as an internal or external command
  operable program or batch file.

  Try to do

  echo % ORACLE_HOME %

  and then

  set PATH=%oracle_home%\bin\

• Are the buttons of block or inline tags?  Browser not recognizing the links.

  Hi, I have problems to make the labels of button used as links in Internet Explorer.

  All I want is for, when a button is pressed, to take the user to another page - surely what buttons are for?  So I must have done something wrong with the code does not work in Internet Explorer, but work fine in Firefox.

  Its as if the browser isn't recognizing the link and I read that if you put a block inside an inline tag it can cause problems with IE.  I played a bit with the types of display for the ages but can not solve, and it seems a really basic question.

  Here is my code:

  < body >
  < a href = "minutes.html" >
  < button > link here < / button >
  < /a >
  < / body >

  I can work around this by creating images of buttons etc etc, but button tags are a much faster solution, so I'd appreciate some advice on how to use them.

  is an inline tag, which means that you can have more than one button horizontally adjacent tags on a single line.

  To make a button click something, you must add an event handler, for example.

  Go to FOO

  The tag by itself has no inherent function.

• Acrobat 9 is not recognizing the Word 2008 structure for bookmarks

  Hello - I posted the following on Sunday Acrobat User Community Forums and got zero response.  I talked with Adobe tech support today and was encouraged to post here.

  Limping to the finish line of my thesis of doctorate voluminous, broken and with Acrobat 7 only, I have created a PDF file then found that Acrobat was not recognizing my word for the bookmarks structure.  I immediately thought it was because I had upgrade to Office 2008 for Mac and I do need Acrobat 9.  So I used the remaining balance on a credit card to buy Acrobat 9 download, updated, make a pdf of my review of literature part 1 and - ta, da - Acrobat 9 does not recognize my word structure.  In other words, when I go to bookmarks and select the Options menu, 'New signet of structure' option is not available.  My Word docs are all set up with heading styles allowing automatic table of contents in Word.  I thought that's how it is supposed to work to create bookmarks in the PDF files.  I had created bookmarks manually to my maps and tables but, as noted, my thesis is large and so are the tables of contents - far too long to have to manually enter unless there is simply no other way.  Already in the hole at the end of my long doctoral work, it seems currently my $159 for upgrade Acrobat 9 was all for nothing.  My last expert support contract has expired for a long time, and I guess I'll have to throw more precious money, I don't have to get professional support for this issue.  I will be very grateful if anyone on this forum can advise you.

  Version Note: after the installation of Acrobat 9, I did making level that arises and thought he said 9.1.3.  Not invited to, I even restarted after the upgrade, but when I check "About Acrobat" it tells me I have version 9.0.0.

  After posting the Sunday preceding, I discovered that when I save in pdf Acrobat 9 to Word doc files, I get a pdf file with the first pages of couple in a file separate from the rest - possibly split to a new section.  I was wondering if it was due to a mistake I might have made in distilling trying to follow confusing (to me), Setup of Acrobat 9 for Mac instructions.  While talking with colleagues in tech support I saved a pdf from a docx file and he made that a single PDF as you wait, but as mentioned above, those who do not recognize my style of header structure Word integrated.  I have my text many paper files in format doc at the request of a member of the doctoral Commission and don't want to risk having to reformat after just docx conversion if I can do PDF files - I would rather just to use Acrobat 7 If Acrobat 9 can't read my structure of Word - the reason that I dropped the bucks on it now , because I hope update Creative Suite as soon as POSSIBLE, but can't afford it right now.  The tech asked me to uninstall Acrobat 7 where this may be the source of the problems, but I don't want to do where I still need to use it.  He gave me a few alternatives, including the new preferences and a new user account with administrative access to see if Acrobat 9 will work correctly not used by Acrobat 7 on my main account.  Also I try to uninstall and reinstall the upgrade to Acrobat 9.  But frankly, I'm very disappointed at the idea of be assaulted many more hours trying to get a working product that doesn't seem to be the height of its claims - at a time where I expected to do (finally).  Someone out there has successfully created bookmarks from a Word 2008 for Mac style hierarchy?  Considering the time I've spent so far, I might as well have stuck with Acrobat 7 and just to introducing bookmarks manually.  I am reluctant to put even more time trying to use Acrobat 9 if I don't know for certain that will work, given the time that I should probably spend ion entered manually some bookmarks.  Unfortunately, after downloading Acrobat 9 I trashed all of the PDF files I had done with Acrobat 7 to avoid confusion, so I even have to go through those.  Grrrrrrrrr!  Any ideas welcome.

  Version of Acrobat Mac doesn't recognize any structure, links or any special properties in any word or an Office Document embededed. The hooks needed to do this are not included in the version of Microsoft Office for Mac. This is the only feature that Windows Office/Acrobat. I'm sorry. To do something like a desseration Ph.d. I would have recommended FrameMaker which is great for long or other technical documents. It is no longer available for the Mac :-( You will need to add bookmarks, links, etc. directly in the final document of Acrobat.

• Need help with Vista not recognizing the .sys file

  Please help me!  I am trying to load a driver USB 2wire on Vista and it does not recognize the .sys file.  Can I convert this easily to .exe, or y at - it another way to achieve this... I am a novice at best here.  Thank you!

  Can you check it out here:

  http://support.2Wire.com/?page=view&article=545

  just to see that you found the driver for the right adapter. It turns out that there are two.

  I won't be able to respond for a while.

• computer not recognizing the cd/dvd.

  MY HP computer do not recognize cd/dvd = when I go to Device Manager and double-click Properties it says Error loading driver (error code 19)-
  I have windows vista home edition/i tried to go to the Device Manager and on some suggestionn those of the United Nations since the CDROM
  then re booted.
  It shows in Device Manager - but always watch - sign and sign - yellow
  without change and the same message as above
  Help, please

  Hello
   
  1. have you made changes on the computer recently?
   
  The unit will not work properly if the driver is damaged or can not load the Windows generic driver. To resolve this problem, try running Microsoft Fixez_ the. Visit the following link to download the fix it: http://support.microsoft.com/gp/hardware_device_problems
   
  You can also run this fix if the still lingering question and check the result: http://support.microsoft.com/kb/314060
   
  If the problem persists, then please contact the manufacturer of the system for more support.
  http://h20000.www2.hp.com/bizsupport/TechSupport/ContactHP.jsp?
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows 8 is not recognizing the extra space in the hard disk resized

  I was out of the room on the virtual drive of Windows 8 in VMWare Fusion 5.02. I increased the size of the disk in the settings, but when I run Windows, he does not see the extra space. Obviously, I have to leave something out of the process. If you can help me, please let me know what I am doing wrong. Thank you!

  Have you ever increase the NTFS of Windows partition in disk management or you do not see the additional disk space

  André

• Quiz - not recognizing the right answers

  Just try to create a quiz using Captivate.

  I thought that I understood, except that it does not recognize the right answers.

  http://www.learners-Guide.co.UK/QuizTest/Captivate/tests/test3/test3/index.html

  I checked the box to tick boxes for Q2 and Q1.

  That I may have hurt or spleen?

  Thank you.

  Donal thanks. Look again I can see what I was going to hurt. I was clicking "Next" rather than "submit" after each question. Thinking about it, I assumed that 'next' lets back you to the questions that you might want to mull over.

• Windows XP is not recognizing the USB Ports?

  My NetBook of Asus Windows XP does not see any USB device I plug. Everything was fine before I left on vacation. My return (netbook left alone in the House, nobody else uses) I plug in any device is recognized.

  It is also not recognize memory cards I plug in the memory card slot. This has all worked very well before.

  No removable disks are visible in disk management. Device Manager can't find no error in the sections of the USB. Check for material changes in DM solve either. Drivers seem to be ok from what I can tell.

  Of course, I restarted a sound all USB ports and the memory card with multiple devices.

  Help, please

  Hello

  Refer the article that could help you solve this problem.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• HP 3050 j610 not recognizing the scanner or scan

  pls help. I instaled and reinstaled it makes me sick. .. I can print without problem.  but it will not scan.  Since a scanner, it says I have error to go to the computer.  to the computer it just does nothing. .. ive never had a problem like this before... thks gazzoomom

  Hi Gazzoomom,

  ·         What operating system is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Please refer to the below mentioned articles and check if the steps help you solve this problem:

  The problems of scanning

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• Device not recognized - the firmware update does not work

  I opened my package and am trying to get up and running.

  I have a 5 or 6 year, PC - computer Dell Pentium 1.8 ghz running Windows XP - SP 3 and Windows Media Player version 11.

  Plug in my Fuze v02.01.09A - I get a peripheral grateful error

  When I in MSC - my computer does not recognize device

  If I try to run the Sansa update - I get an error message

  "' The following error has occurred: *.

  Your device is in MTP mode (which is not the case).  It can only be updated in MSC mode.  Please disconnect your device and switch to MSC mode if you want to check the updates.

  *****************************************************

  If I go to device MTP - my computer recognizes that I have material foundNew and wants to use the hardware installation CD.  I put in the Rapsody CD that came with my computer and ask Windows to search for the installation of the equipment.  Install a window of Wizzard opens looking software flashing I have an MTP device is plugged in and I see the files to move via photo of 2 folders with files to move files from one folder to another.

  Followed by an error message

  that there was a problem installing this hardware.

  MTP device

  Teh device cannot start - (Code 10)

  Click Finish to launch a troubleshooting tool that can help you solve the problem

  *******

  Next, I get a window all over again.

  This day - the only thing I could do is get a few FM stations with a fairly weak signal.  The sound quality is good - but right now I have a $80.00 hockey puck who isn't even the right shape.

  -In addition, the unit had a load of 3/4 out of the box - and I've not been able to get the charge up at all - after be plugged for 2 hours to a USB port on the back of the computer.  I saw the bar to drop slightly to 10 minutes of FM radio listening.

  You have access to another computer? Try it may be your USB media. Try changing the USB ports on your pc. If its 5-6 years, you can have a port goes wrong.