Message authentication process

Similar Questions

• v ('P101_USERNAME') the null value in the message authentication process

  We hit a problem after the deployment of our application APEX 3.1 on the customer site. The value of v('P101_USERNAME') in our message authentication process is zero on our customer site, but not in our development environment.
  -The two environments are 11.1.0.6 DB with APEX 3.1.0.00.32 on windows.
  -P101 being the default login screen.
  -l' user connects using a custom authentication scheme that ends with success.
  v ('APP_USER') has the correct value (in uppercase)
  -We receive "ERR-10740 unable to perform custom processes post-auth" because an unexpected exception is triggered due to a null user name that we can detect using debugging PL/SQL code.
  -export the application and the source code are the same.
  
  The message authentication process refers to v('P101_USERNAME') which is then transmitted to a couple other processes, including a Web service call and a search function as active directory. The reason why we use it is because it is not transformed to UPPERCASE as with APP_USER - we need spend the exact user name in our post processing of authentication that can be mixed case.
  
  For some reason, it's just no longer works in a different environment - that someone has encountered this problem? I read on a question referring to v ('APP_USER') after a 3.1 update, but it doesn't seem to be a solution.
  
  Any help would be appreciated.
  
  Ian.

  Try to disable the process to clear the cache on the login page. If that contributes to recover at least a process to clear the password element.

  Scott

• I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix?

  I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix this?

  Did you go digitalpublishing.acrobat.com, connect with the Adobe ID and accept the terms of use? If this is not the case, do using a computer. You can't do this from a mobile device. This is not an automatic process, you must do it manually.

• Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

  I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

  Hello

  You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

  Support

• How can I fix a problem of Message Authentication Code

  Firefox just make me upgrade to 13.0.1 and now I can't find on google, yahoo, ixquick and startpage. Whenever I do, I get this:

  The secure connection failed

  An error occurred during a connection to startpage.com.

  SSL received a disc with an incorrect Message Authentication Code.

  (Error code: ssl_error_bad_mac_read)

  I tried to reinstall, install older versions and troubleshooting pages, but nothing works. I can go to Web sites that I have Favorited or those that I have links too, but I can't just use the search bars. All I have this problem and know how to fix?

  Who issued the certificate?

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".

  Let Firefox recover the certificate: "Add Exception"-> "get certificate".

  • Click on the "view..." button. "and inspect the certificate and the Coachman, who is the sender.

  You can see more details like the intermediate certificates that are used in the details pane.

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• How can I fix error message authentication on incredimail cannot recive email

  How can I fix error message authentication on incredimail cannot recive email

  Hi David,

  1. is the issue limited to IncrediMail?

  2. What is your default browser?

  3. what email contact are you not to receive emails from?

  4. have you made a recent software or hardware changes to the system?

  If you are facing the issue only with IncrediMail, you can get in touch with IncrediMail Support for assistance.

  For more information, see the article:

  How can I correct an error send/receive?

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• [Cisco ACS] 11036 the RADIUS Message Authenticator attribute is invalid

  Hello

  I had a lot of Cisco AP related to Cisco WLC 2.

  On each WLC, I configured a primary and a secondary RADIUS server.

  RADIUS servers are Cisco ACS 5.2.0.26 (patch 10)

  ACS primary and secondary configurations are synchronized.

  There is no problem between primary rules WLC and Cisco ACS (primary and secondary).

  When secondary WLC asks primary Cisco ACS, I get this error "11036 the RADIUS Message Authenticator attribute is not valid.

  WLC secondary contacts automatically secondary Cisco ACS and it works fine.

  Cisco ACS description for this error: "this can be reason of mismatched shared Secrets."

  The two Cisco ACS are synchronized, so I should have the same error on them...

  Why primary ACS generates this error?

  Thanks for your help,

  Patrick

  Patrick: The shared secret mismatch could be on the side WLC, not on the side of the ACS.

  Make sure that the shared secret of the radius primary server is configured correctly on the secondary WLC.

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• How to get rid of the message "Action Processed."

  When I save data in one of my reports, I get a confirmation message "Action Processed."... may I know how to disable it...?
  
  Thanks in advance

  Under the process of the Page, see Messages - process success Message.

  Jeff

• Message authentication scheme

  I use a custom authentication scheme to validate my users, but I always use groups and standard users from APEX. One of the controls that I do is the APEX_UTIL. GET_ACCOUNT_LOCKED_STATUS. I want to display a message "Locked user" If this is true instead of the message "Invalid Login Credentials" that is currently. Is anyway to do this?
  
  BEGIN
  -User must exist in the table SIS_USER
  FOR x in get_authenticate_info LOOP
  sis_user_exists: = true;
  l_allow_sis_authenticate: = x.allow_sis_authenticate;
  END LOOP;
  If sis_user_exists = false then
  GoTo end_of_trigger;
  elsif APEX_UTIL. GET_ACCOUNT_LOCKED_STATUS (p_user_name = > p_username) then
  GoTo end_of_trigger;
  end if;
  END;

  Ah ok, my bad.

  Why don't you just create a validation of the page for the location of the user account is locked. That way if the account is locked (i.e. validation fails), the connection process is never triggered.

• Firefox and Thunderbird just does turn, no error message. Process on abandonment, leaves get the accident message after a while.

  Hello

  Since last night, my Firefox just turns, unable to find or load any URL. It's never stops and gives an error message, everything. On leaving, the dying process persists for a minute or two before reporting that Firefox has crashed. My Thunderbird also has the same problem.

  My internet works, I can sit on IRC, use IE as browser, sit on Skype etc.

  I tried to restart my router and my PC, I emptied my DNS, I scanned my computer with AVG and Malwarebytes, all came clean. I changed the connection settings in Firefox to see if that solved, but he did not. I tried to start Firefox in Mode safe, did not help either. I tried to reinstall both programs, almost nothing works and at the moment I am at a standstill.

  Kind regards
  Kodain

  It was probably a problem with the Windows internet settings and their release would have worked as well. That could be done by restoring the advanced settings for Internet Explorer and then reset IE to factory default.

  However, I am happy to hear that you're having no longer any problems with your internet connection.

  I hope you enjoy and continue to use our great products of Mozilla.

• After logging in to Windows Gets an error message: Exception Processing Message c0000013 75.

  Original title: no disc dialogue Exception Processing Message c0000013 75...

  When I start Windows XP SP2 the dialog box next No. disc appears from time to time.  This started after I uninstalled the software incompatible with Windows XP.  The 75 begins a series of numbers.  The PC is several years old and did not know this before exception.

  Setting prevents just the pop-up message annoying - if there are some problems with the device, the event will always be recorded in Event Viewer.

  I've never had anyone report problems after you make adjustments - just that they are happy, that they no longer see the message.

• Messages authenticated in the newspapers about WLC

  I have a number of controllers of WLC and I have something a little strange on one of them.  When I look at the newspaper of trapped on this one particular controller I see not all authenticated: messages.  I see DeAuthenticated: but unauthenticated:.  There are the clients associated with the APs on that controller, and when you walk in this area with a wireless device, it seems to work.  I thought it might have something to do with the record level, but these settings look the same as the rest of them.  I don't think I'll have an operational problem, but it's just kind of weird about the logging of messages.

  Thank you

  Check the trap under MANAGEMENT journal orders > SNMP > trap controls.  Under client options, "Authentication" is selected?  usually it's off default b/c, most of the people are interested in failures and no successes.  In addition, successful fill the newspapers fairly quickly.

  Thank you

  Lee

• My message to process is behind my CSS dropdown menu (issue 25)

  Hi all

  Is anyone using the CSS menu drop down with the list of APEX that Scott Wesley gives a tutorial on how to go?  According to the guidelines of this blog: base Oracle: CSS menu using APEX list drop-down

  His departure from here: ultimate Horizontal Drop-Down Menu Demo | Free CSS Menu drop-down framework

  Im running APEX 4.2.4... Ive just crossed to March and updated the application to issue 25. Ive also successfully installed the CSS drop according to the tutorial from Scott... Everything works great and I got to rebuild the application to use with theme 25...

  However, Ive suddenly found that when I get a message error or process jump towards the top of the page as a result of insert/update, or a validation error. , the drop down menu is always on... (i.e. the message box and the content behind the menu..)

  Ive tried to change the regions to my menu list, without success. I guess only he the some CSS is not quite right.

  Ill download a trial on the site, but is anyone using this and hit the same error...?

  For the CSS for the reference excluding images model is:

  <div id="navwrap">
<ul id="nav" class="dropdown dropdown-horizontal" style="margin-bottom:10px;">

  <style>

  ul {

    list-style-type: none;

  }

  #navwrap {

    float:left;

    width:100%;

    margin-bottom:4px;

    background:#f6f6f6;

    border-style:solid;

    border-color:#d9d9d9 #d9d9d9 #d9d9d9;

    border-width:1px 1px 1px 0;

  }

  </style>

  Thank you very much

  Richard

  Richard Legge wrote:

  Thanks Scott... Now on to the next challenge... Speed up the load Enkitec Navbar, as the unformated menu is located at the corner for a while sometimes... I saw that you can move the files to support for the file system, but I am running with EPG, so I don't think that I can refer to external files...

  What is important is not that the style sheet is stored in the file system, but it is referenced in the page head element (as required by the HTML specification) is available when the browser starts to build the DOM model. You can use an external style sheet located in the APEX or XMLDB repository rather than the file system and refer to this in the page CSS file URL property or the templates or put the rules in the CSS Inline property page template.

  Enkitec vertical list Navbar appears momentarily

  FAC586. Point taken. As always, his maximum weight the chances of the generation of the example on apex.oracle.com vs whether an easy answer...

  I been using CSS for more than 15 years and find that when you use the theme 25 and other new APEX themes here are a few easy answers. Stir in 3 party components and multiple devices and user agents and the possibility of a simple answer is remote. People with the answers do not always have a half hour is detached to reproduce a problem, but can spend 5 or 10 minutes watching an existing example. When it's your problem probably is to you to put the bulk of the effort in fixing it?

• Use an authentication process after with LDAP

  I am new to APEX decently and have implemented the LDAP authentication for my application. It works as expected.  However, because of our training guidelines, no one can access the application without the proper training.  I have a table in the database for users who will be managed by the owner of the system once the development is complete and each user has an ACTIVE field which can be displayed/hidden.  I need a procedure after authentication which checks the field ASSETS in the table USE to ensure that it returns TRUE before give us them access to the application.  Any help would be greatly appreciated!

  Request Express 4.2.1.00.08

  DECLARE

  number of l_is_active;

  l_return boolean;

  BEGIN

  Select count (*)

  in l_is_active

  the user

  where ldap_id =: P101_USER_ID

  and active = 't';

  IF l_is_active > 0 THEN

  l_return: = TRUE;

  ON THE OTHER

  l_return: = FALSE;

  END IF;

  END;

  Hello

  It is certainly possible to put this code in the audit function, but the result may not be what you expect. This function runs on every request, as an additional Sentinel who checks whether the session can be used by the APEX. If it returns false, APEX creates a new session and redirects you to the page of invalid session (i.e. the connection). I think that it is better to create a permission based on the above query and activate this permission at the application level (in the security of the application tab). If authorization fails after the connection, APEX permission error message displays, where you can explain why access is not allowed.

  Kind regards

  Christian

• MESSAGE TO PROCESS DCOM SERVER IS DISPLAYED AND SHUT MY SYSTEM DOWN EVERY 5 MINUTES, WHAT SHOULD I DO?

  Every 5 min my system stops because of SERVER DCOM... also IE stops... is no longer to defend my defender and my update are not updated automatically.  Please can anyone help with these issues. ???

  Hi Terri,

  Are a. When you facing this problem?

  B. recent changes made on the computer?

  Let us try the following methods.

  Method 1

  Try to perform a scan for viruses online on your computer.

  http://www.Microsoft.com/Security_Essentials/

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 2

  Step 1

  Try to check if the DCOM Server process Launcher service is running on the computer.

  You must be logged on as administrator to perform these steps.

  1. click on Start.

  2. type services.msc in the search box and press on enter.

  3 right-click the DCOM Server process Launcher serviceand then click Properties.

  4. under the tab general , next to Startup type, make sure that Automatic is selected.

  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.

  Step 2

  1 open Event Viewer by clicking the Startbutton, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click eventViewer . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on the event log in the left pane.
  3. double-click on an event to view the details of the event.

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Reference:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think