Use an authentication process after with LDAP

Similar Questions

• Data do not form filled - using Fetch manual process (after the header)

  Hello
  
  I have a FORM based on the EMP table... say with the next field.
  
  1. non - employee P1_EMP_NO
  2. employee name - P1_NAME
  3 employee location - P1_LOCATION
  
  I have another table called EMP_STG, it's the temporary table for EMP.
  I have suite 2 button on the page of the form.
  
  -Save (when I click on it, the data are inserted into the EMP table)
  -Save temporary (when I click on it, the data is inserted into the temporary table EMP_STG table)
  
  The form is already have a Fetch automated line process (after the header) to extract data from the EMP table. It works very well.
  
  I created a second process of recovering data from the temporary table EMP_STG.
  Extraction of EMP_STG / after the row header
  The problem here is P1_EMP_NO & P1_LOCATION are not getting filled. Process works fine, no error...
  Only form elements are not get filled.

  declare
    cursor c1 is
      select * from emp_stg
      where emp_no = :P1_EMP_NO;
  begin
    for c1_rec in c1
    loop
       :P1_NAME := c1_rec.NAME;
       :P1_LOCATION := c1_rec.LOCATION;
    end loop;
  end;

  Note:-both the above automatic Fetch & Manuel Fetch based on some condition and a moment alone executed.
  
  Thank you
  Deepak

  I guess that you will then have to consider the options, what I said in a previous post.

  CITY

• Authentication with LDAP...

  I managed with a LDAP hook which authenticate my domain account and it works well and everyone can connect!
  
  What I want to do is authenticate with LDAP and then leave through the eyes of the table to the top of my list of authorized users, or to refuse the connection.
  It's a small number of users is not a big problem for me to have the table with 5 or 6 users.
  
  I like the fact that the credentials of the user are managed by LDAP, and I don't want the hassle of creating ad groups that are managed by a third party.
  
  Does make sense?
  I would like to have some sort of model in the APEX that says...
  Okay, I know your domain account is valid now, let me see what you can do...

  you are an end-user - ok to connect
  you are an administrator of app - ok to connect
  you are person - not allowed - go

  I know how to deal with permitting components once the connection is permitted - just trying to find out how allow/deny connections
  
  Would I do that on the page of authentication scheme and if so where does make sense to put in a routine for that.
  
  Management of the Session of the page?
  Connection of transformation... perahaps here = > authentication process after?
  
  Thanks for your advice.
  
  I'm playing with some pl/sql that looks like this in treatment/Post-Authentication connection process
  
  declare
  Ditto Boolean: = FALSE;
  Start
  If: P101_USERNAME = "< a user authorized >."
  then same as: = TRUE;
  on the other
  owa_util. REDIRECT_URL ("< back to login page > '");
  end if;
  end;

  Hello

  I use LDAP had encountered the same problem. I think you have several choices available. It is the setting of "Message authentication" on the 'authentication scheme"that you use. Allows you to (citing the help): 'specify a block of code to run through the procedure of Application Express login (login API) after step of authentication (verification of login credentials). The login procedure executes this code after it has executed its normal functions include setting a cookie and to the recording of the session and just before it redirects to the page of the desired application. Specify this code as an anonymous block of PL/SQL that returns no value.

  Another method, which is what I used (probably not knowing the foregoing there!), has been to add in a branch on page 1 (the login page redirects always connections to page 1). Direction parameters are:

  Branch point: on charge: before header
  Target type: Page of this Application
  Page: 101
  Clear Cache: APP
  Condition type: NOT Exists (SQL query returns no line)
  Term 1:

  SELECT 1 FROM MYUSERTABLE WHERE UPPER(LOGINNAME) = UPPER(v('APP_USER'))
  

  Then, even if the user has valid credentials, the branch on page 1 always redirect them back to page 101 if their LOGINNAME does not exist in the MYUSERTABLE table.

  I'm sure there are other ways as well, and others advise on "message authentication" If you want to use

  Andy

• System 32 error (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied))"

  Original title: svchost (1020)

  Event type: error
  Event source: ESENT
  Event category: general
  Event ID: 490
  Date: 2010-10-19
  Time: 14:51:34
  User: n/a
  Computer: ROB
  Description:
  Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.".  The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Hi Robrw,

  1. when exactly you receive this error?

  2. don't you make changes to the computer before this problem?

  You can try to rename the catroot2 folder and check if it helps.

  Step 1:

  a. Click Start and in run type C:\windows\system32 and click ok

  b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old

  If you are not able to do the normal mode, try to start in safe mode and rename

  Check out the link for more information on starting your computer in SafeMode below:

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.

  See the following article:

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  Step 3:

  You can also try to temporarily disable third-party security software and firewalls and check what is happening.

  Note: Activate the security software after the resolution of the problem.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Local use and authentication AD with ACS 5.6

  I have an ACS 5.6 unit configured to use AD authentication for my default network access and rules. It works very well.

  I tried to implement some features, put them in a group and give only locally defined ACS to users access to these devices.

  Problem, after you have created the local accounts on ACS creates a group of local identity, and trying to authenticate with a camera, I always get "object not found in the identity store.

  Is there a way to have the hybrid authentication like that? How do we?

  Hi Colin,

  One thing that comes to mind is "sequence of identity store. Ensure that you have "internal users" listed in there otherwise that demand would never be mapped against the internal users.

  I also want to double check the source of identity under default device admin or any service that you created. Ensure that internal users.

  Take a look at the document below for more details on the identity store sequence.

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-se...

  Kind regards

  Kanwal

  Note: Please check if they are useful.

• Shibboleth with LDAP authentication

  I'm running in "Internal Server Error" trying to authenticate by using shibboleth with LDAP. Here is the ColdFusion error.

  Element MYSITESHIBBOLETH. USER name is not defined in the SESSION. The specific sequence of files included or processed is: \\commonspotshare.mysite.com\commonspot$\TEST\test.mysite.com\authenticate.cfm, line: 32

  And here's the line in the file authenicate.cfm 32.

  

  Well, I got it to work. I need to use reReplace() to extract the part that I need to make work of cfif and the session be prepared.

  session.testShibboleth = StructNew();

  session.testShibboleth.username = REReplace (http_header.headers.eppn, "@test.com", "","ALL");

  session.testShibboleth.mail = http_header.headers.eppn;

  session.testShibboleth.groups = ArrayToList (rematch ('WEB\.)) (([A - z-] +', http_header.headers.member));

  session.testShibboleth.isAuthenticated = "true";

• I start using adobe lightroom and photoshop with trial version and today I decided to use the creative photography of Cloud (one year) and after the purchase, I received email to confirm that, but my adobe lightroom and photoshop always demo how can I sol

  I start using adobe lightroom and photoshop with trial version and today I decided to use the creative photography of Cloud (one year) and after the purchase, I received email to confirm that, but my adobe lightroom and photoshop always demo how can I solve this problem

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  [moved from the download, installation, commissioning creative cloud download &install]

• Message authentication process

  Hey everybody!
  
  Alright! Here's my problem. I'm building a front end of the APEX for a pre-existing database that connects with many other applications. The way they authenticate the user is so weird. in any case, I need to call a message authentication process that returns an ID based on the user ID that after authentication, ID is used in most of the session.
  
  So far, I created an item hidden on the login page.
  And I have the appelΘ authentication process a package on the functioning of the database.
  
  Everything I need to do is somehow move the p_username in my service and have the return value to be stored in my ELEMENT. Is it possible through the block post authentication process? Or will have to create a process of PL/SQL on the first page that I connect?
  
  Thank you very much for your time

  Hello

  Why not call a 'function-wrapper' that code you yourself, which then calls the other function that you use, for example:

    ...
    v_code := pk_party_authtn.get_xref_id(v('APP_USER'));
    APEX_UTIL.SET_SESSION_STATE('XREF_ID', v_code);
    ...
  

  In this way, you can include custom logic, you need, while honoring the service you should use.

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• v ('P101_USERNAME') the null value in the message authentication process

  We hit a problem after the deployment of our application APEX 3.1 on the customer site. The value of v('P101_USERNAME') in our message authentication process is zero on our customer site, but not in our development environment.
  -The two environments are 11.1.0.6 DB with APEX 3.1.0.00.32 on windows.
  -P101 being the default login screen.
  -l' user connects using a custom authentication scheme that ends with success.
  v ('APP_USER') has the correct value (in uppercase)
  -We receive "ERR-10740 unable to perform custom processes post-auth" because an unexpected exception is triggered due to a null user name that we can detect using debugging PL/SQL code.
  -export the application and the source code are the same.
  
  The message authentication process refers to v('P101_USERNAME') which is then transmitted to a couple other processes, including a Web service call and a search function as active directory. The reason why we use it is because it is not transformed to UPPERCASE as with APP_USER - we need spend the exact user name in our post processing of authentication that can be mixed case.
  
  For some reason, it's just no longer works in a different environment - that someone has encountered this problem? I read on a question referring to v ('APP_USER') after a 3.1 update, but it doesn't seem to be a solution.
  
  Any help would be appreciated.
  
  Ian.

  Try to disable the process to clear the cache on the login page. If that contributes to recover at least a process to clear the password element.

  Scott

• Error: "the process cannot access the file because it is being used by another process." when treid to install the device driver

  Original title: Windows cannot install the drivers

  I had a lot of trouble installing the drivers on my Windows computer.  I went straight in the Device Manager and deleted the devices I tried to install and reinstalled them, I went into safe mode, I got Windows to run the console and only the basic process and run from there Device Manager... no matter what I do the same mistake.

  "The process cannot access the file because it is being used by another process".

  Even after a restore of the system, he did this, and I don't know what to do anymore.  Only devices that have been previously installed work.

  What's more important install my Blackberry software because my phone is broken.  The software cannot detect my phone because the drivers have not been installed.  Most of the devices I can use with Linux (I have Windows Vista and Ubuntu running on the same computer), but RIM don't make Blackberry for Linux software, so I have to do it on Windows.

  Hi paco2012,
   
  1. did you of recent changes on the computer?
  2. how many user accounts you have on the computer?
   
  Try these steps and check the result.
  Step 1: Install the driver as an administrator
  a. shut down the computer runs.
  b. start the computer and the connection as an administrator.
  c. find the driver configuration file, right-click on the file and click "Run as Administrator".
  d. follow the instructions in the wizard to install the driver.
  e. restart the computer once the driver is installed.
   
  Step 2: Try to install the driver to boot either by disabling all non-Microsoft programs
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot."
  c. restart the computer.
  d. install the driver and verify the result.
  e. follow "step 7: reset the computer to start as usual.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• executable files: cannot access the file because it is being used by another process

  Hello
  I created a file named test.bat on my desk
  baptized "test.bat" and sent the notebook, wrote "REM" and recorded.
  so, I closed my notebook and reopened, has added another "REM" and saved the file again.
  then I tried to rename, move the file to another folder and delete
  everything went without any problems.

  But if I create the file and run it, the command prompt will appear for a while and then disappear.
  I can rename or move the file without any problem,
  But if I try to edit the file in Notepad, I get this error:

  The process cannot access the file because it is being used by another process.

  and the file is not saved.

  also, if I try to delete the file, it seems to be deleted until I press F5, the file appears again.
  When you try to rename/move this new file, I get another error:

  File Access Denied

  You need permission to perform this action

  You need the permission of the administrator of the computer to make changes
  in this file

  It seems the file is opened (or if I choose to delete) after a few minutes, then it is not if I try to access
  the file (I kept pressing F5 every few seconds for 15 minutes and the file is missing)

  the problem appears if occuar with any file name, anywhere, not just the office or home by car, not even on the same disk,
  while I had no problem when I started in an old installation of windows xp and repeat the same steps.

  I tried to use the sysinternals utility handle, that's what I have:

  After creating test.bat:
  C:\Users\User>handle test.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After you run test.bat:

  C:\Users\User>handle test.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: file A18: C:\Users\User\Desktop\t
  EST.bat

  has obtained the result above after attempting to remove test.bat also.

  After the creation of othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  After execution of othertest.bat:

  C:\Users\User>handle othertest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\o
  thertest.bat

  After you rename the othertest.bat:

  C:\Users\User>handle othertest.bat

  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  No found the corresponding handle.

  C:\Users\User>handle renamedtest.bat

  Handle v3.51
  Copyright (C) 1997-2013 Mark Russinovich
  Sysinternals - www.sysinternals.com

  System pid: 4 type: BD0 file: C:\Users\User\Desktop\r
  enamedtest.bat

  the also occuars when I run any .exe file and delete it after its finished running, I deleted
  the handle.exe and the handle64.exe after the test above and at the same time returned when I updated their records.

  can someone help me?
  IAM using Windows 7 ultimate 64-bit.
  Thank you.

  I struggled with this VERY ENNUYANT thing for a long time on a Windows Server 2008 R2.

  Just found the answer:

  http://superuser.com/questions/260375/why-would-system-continue-locking-executable-file-handles-after-the-app-has-exit

  Activation of the service 'Application Experience' does the trick for me.

  If I got paid for every minute spent dealing with the mysteries of Microsoft... No, wait! Paid!

  Thank you Microsoft!

• Authentication of ACS with PEAP / MSCHAPv2 - customer rejecting Server

  Hello

  Have a network setup wireless with Cisco 1131AG towers, c6500 WISN module test (4404-WLC) is authenticating with a Cisco ACS appliance (1113) using PEAP and MSCHAPv2 authentication.

  The laptops have the Cisco SSC customer (in collaboration with Mgmt SSC utility).

  A self-signed certificate created on the fate of ACS and root exported and installed on the laptop computer of TCL.

  IF CSSC box 'validation Server' is not selected, the authentication process works and I am able to connect to the network.

  IF CSSC "Validation of server" is checked, the authentication will fail.

  The problem, it appears that the customer refuses the server certificate:

  "Server certificate chain is not valid.

  The GBA, in the 'fail' authentication logs, message the following is stated:

  "Authentication failed during SSL negotiation" (which obvioously refers to the strand of string not valid)

  Any ideas?

  When you create a self-signed certificate, is there a specific directory, when the server certificate must be located? as c:\cert\certificate.cer

  Also, the certificate name must match host name of GBA?

  i.e." CN ="

  Any advice or pointers would be appreciated.

  Thank you

  Questions, it's that when you check the validation of server Box, you must make sure you have the certification authority in the root Certification Authority trusted. For example, in windows, there is a list of servers CA where you check the server certificate validation and also one of the root certification authority is on the list. If the root CA is not listed, then you must add to the list and check it out.

  You are right on the client rejecting the sever cert... Authentication failed during SSL negotiation

  This doc will give you an overview:

  http://www.Cisco.com/en/us/products/sw/secursw/ps2086/products_configuration_example09186a0080545a29.shtml

• Secure ACS Authentication and Authorization with SecurID

  I am able to authenticate connection attempts using an external database (RSA SecurID).  The problem is that everyone with a token is authorized to connect on any switch with priv15 or whatever I put (but no way to control who gets what access).  How can I allow users based on a certain type of belonging to a group?  The SecurID server is already integrated with LDAP, it only checks to see if the user exists in the database.

  I need to create two groups, or even only allow a single group and deny everyone, but anyone in the organization with a token is allowed to connect.  I can't find guides who do anything beyond authentication when you use a SecurID token.

  Thank you.

  Hello

  Have routers and switches, you given the command "authorization exec default group aaa GANYMEDE", it seems that you have only defined authentication on devices. When the control is in place, user access privileges may be governed by the ACS. In network administrator access by default policy (if you are using the default strategy for GANYMEDE), to set the authorization rule to verify membership in a user group and provide the appropriate profile of shell. Make the default rule to give DenyAccess shell profile to other users.

• Help with the easy VPN server with LDAP

  Hello

  I used to be able to set up our easy VPN server with local authentication.

  But now, I'm trying to use LDAP authentication to match with our policies.

  Can someone help me please to check the config and tell me what is wrong with him?

  My router is a Cisco1941/K9.

  Thank you in advance.

  Ryan

  Current configuration: 5128 bytes
  !
  ! Last configuration change at 13:25:16 UTC Tuesday, August 28, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  ! NVRAM config update at 05:03:14 UTC Monday, August 27, 2012, by admin
  version 15.2
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  !
  AAA new-model
  !
  !
  AAA group ASIA-LDAP ldap server
  Server server1.domain.net
  !
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authentication login ASIA-LDAP-AUTHENTIC ldap group ASIA-LDAP
  local VPN_Cisco AAA authorization network
  Group ldap AAA authorization network ASIA-LDAP-ASIA-LDAP group authorization
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  !
  No ipv6 cef
  !
  !
  !
  !
  !
  IP domain name domaine.net
  IP cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  Crypto pki token removal timeout default 0
  !
  Crypto pki trustpoint TP-self-signed-765105936
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 765105936
  revocation checking no
  rsakeypair TP-self-signed-765105936
  !
  !
  TP-self-signed-765105936 crypto pki certificate chain
  certificate self-signed 01
  30820229 30820192 A0030201 02020101 300 D 0609 2A 864886 F70D0101 05050030
  2 060355 04031325 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 30312E30
  69666963 37363531 30353933 36301E17 313230 36323630 39323033 0D 6174652D
  355A170D 2E302C06 1325494F 03550403 32303031 30313030 30303030 5A 303031
  532D 5365 6C662D53 69676E65 642D 4365 72746966 69636174 652 3736 35313035
  06092A 86 4886F70D 01010105 39333630 819F300D 00308189 02818100 0003818D
  C1B7E661 4893D83A EFE44B76 92BAA71A 6375 854 C 88 D 4533E51A 49791 551D8EF7
  F82E2432 E65B401D 27FE4896 2105B38A CB1908C1 9AE2FC19 8A9393C3 1 B 618390
  EE6CB1CC 5C8B8811 04FA198E 16F3297B 6B15F974 13EE4897 97270547 31 74270
  4590ACA6 68606596 97C5D4D5 462CACA0 CDDAC35A 17415302 CFD4E329 8E7E542D
  02030100 01A 35330 03551 D 13 51300F06 0101FF04 05300301 01FF301F 0603551D
  23041830 1680142E FF686472 569BCCF1 552B 1200 1 060355 5B660F30 D35060DB
  1D0E0416 04142EFF 9BCCF155 68647256 2B1200D3 5060DB5B 660F300D 06092 HAS 86
  01010505 00038181 00558F64 05207 D 35 AA4BD086 4579ACF6 BCF6A851 4886F70D
  1D0EA15B 75DBFA45 E01FBA5C 6F827C42 1A50DD11 8922F1E5 3384B8D8 8DD6C222
  0187E501 82C1C557 8AD3445C A4450241 75D771CF 3A6428A6 7E1FC7E5 8B418E65
  74D265DD 06251C7D 6EF39CE9 3 D FE03F795 692763 AE865885 CFF660A5 4C1FF603
  3AF09B1E 243EA5ED 7E4C30B9 3A
  quit smoking
  license udi pid CISCO1941/K9 sn xxxxxxxxxxx

  ISM HW-module 0
  !
  !
  !
  secret admin user name of privilege 15 5 $1 rVI4$ WIP5x6at0b1Vot5LbdlGN.
  ryan privilege 0 0 pass1234 password username
  !
  redundancy
  !
  !
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  Configuration group customer isakmp crypto VPN_Group1
  xxxxxxxxxxxx key
  DNS 10.127.8.20
  pool SDM_POOL_1
  ACL 100
  netmask 255.255.255.0
  ISAKMP crypto ciscocp-ike-profile-1 profile
  match of group identity VPN_Group1
  authentication of LDAP-ASIA-AUTHENTIC customer list
  whitelist ISAKMP ASIA-LDAP-authorization of THE
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP-3DES-SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  IP 10.127.15.1 255.255.255.0
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  IP xxx.xxx.xxx.xxx 255.255.255.224
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1
  IP 10.127.31.26 255.255.255.252
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  IP unnumbered Loopback0
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  local IP SDM_POOL_1 10.127.20.129 pool 10.127.20.254
  IP forward-Protocol ND
  !
  IP http server
  local IP http authentication
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP route 0.0.0.0 0.0.0.0 GigabitEthernet0/0
  IP route 10.0.0.0 255.0.0.0 10.127.31.25
  IP route 10.127.20.128 255.255.255.128 GigabitEthernet0/0
  !
  Note access-list 100 category CCP_ACL = 4
  access-list 100 permit ip 10.0.0.0 0.255.255.255 everything
  !
  !
  !
  !
  !
  !
  !
  LDAP attribute-map ASIA-username-map
  user name of card type sAMAccountName
  !
  Server1.domain.NET LDAP server
  IPv4 10.127.8.20
  map attribute username-ASIA-map
  bind authenticates root-dn CN = xxx\, S1234567, OU = Service accounts, OR = Admin, OU = Acc
  DC = domain, DC = net password password1
  base-dn DC = domain, DC = net
  bind authentication-first
  !
  !
  control plan
  !
  !
  !
  Line con 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line 67
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  output transport lat pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  transport telnet entry
  !
  Scheduler allocate 20000 1000
  end

  Router #.

  Ryan,

  It seems that you are facing the question where it is indicated in the section:

  Problems with the help of "authentication bind first" with user-defined attribute maps:

  * Then you are likely to see a failure in your authentication attempt. You will see the error message "Invalid credentials, result code = 49.  The newspapers will look something like the journals below: *.

  Which is the same error you see. Go ahead and replace in your attribute map and test again.

  If you remove the command "bind-first authentication' configuration above, everything will work correctly.

  https://supportforums.Cisco.com/docs/doc-17780

  Tarik Admani
  * Please note the useful messages *.

• Many Apex with LDAP Applications

  Hi everyone :)
  
  
  I have 7 apex applications in the same workspace. I'm using apex authentication but my company now wants to do with LDAP. No problem here. They gave me the credentials and I put that it works, using the apex forum :D
  
  But I have a problem...
  
  I created a main application, with a page with buttons, calling the various applications in the workspace. Whenever I press the button for a request, it sends me to the login page for the application of different.
  
  How can a single login?
  
  
  Notes:
  
  Button code:

   
  f?p=APPLICATION_ID:1:&APP_SESSION.

  Vitor - change the current authentication schema for each application and put in a name of cookie in the cookie name attribute. Use the name of your choice, simply put the same name in each application.

  Scott