message NTDLR

Similar Questions

• Virtual PC 7.0.3, XP Pro - "NTDLR: error fatal 2592reading BOOT." INI ".

  I have been running Virtual PC for Mac 7.0.3,, on my 1.67 GHz PowerPC G4 (OSX 10.4.11) years, but recently, when I click on the button 'Start Up', I get a screen with the following error message: NTDLR: Fatal Error 2592reading BOOT. INI. Also, I am running Windows XP Professional on my virtual machine. All solutions with success? Thank you!

  Hello
  I suggest to check the following link and check if it helps.
  http://support.Microsoft.com/kb/314058

• Qosmio G30-161 does not start - NTDLR "file is missing

  Hi all

  I have a G30-161 double HDD (in Raid 1) which no longer starts...
  He just gives the message "file NTDLR is missing" and is followed by a prompt to restart the computer in which the same error will appear again.

  I got this laptop for my son to fix (lucky me :(!)

  Things, I've looked at so far:

  -Check the BIOS to see if the disks are configured properly - BIOS indicates the two hard drives installed, online and in RAID 1
  -J' had an installation of Windows XP by hand disc then tried to see if it would boot from a CD. He started on the CD ok, but the process Windows Recovery Console/install said he couldn't find any hard drives. Find an Acronis True Image boot disk (using linux I think), once again the started program end, but don't have it no hard drives installed.
  - So with no HD not reports I took one for a test. With disk 2 removed, in an attempt to start the system reports "RAID 1 is GRADIENT" then follows with "NTDLR file is missing. So this tells me that SW RAID working probably and he knows that a HD has been removed.
  All the patches I've read on the PC forums involve the use of the XP Recovery CD or some, but it won't work because the system thinks there are no disc when it starts. We have no ' have a Toshiba Recovery disk for the machine.

  Someone at - he saw the problem above, knows a fix?
  Can I purchase a G30-161 recovery CD anywhere?

  Any help appreciated. ...

  Thank you
  Steve

  Hello

  Looks like your drive is loked I found a thread in forum about the same error message and the user mikeptag posted a solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

  I didn't test this procedure and, therefore, I don't know m if it can help you or not, but in my opinion it's worth to try

  Check this box and post your results

  Good bye

• NTDLR missing / Vista want to install new

  Ok... I'll start at the beginning...

  I have a HP Pavilion Vista Home premium

  My son hit something on the computer and when I tried to reboot the system, I would get a blue screen with a grey box "system recovery options".

  I went through every option but keep returning to the same a screen option was a full restore using a back up but when I cmmc he told me he couldn't find any backup sourse even if I had an external hard drive with a connected backup.

  I had the brilliant idea to use the DVD that brought me in a hp program to repair the HP recovery system. It gives two options for each program from the diskette or hard drive. I chose the disk he restored the system to origional factory condition I clicked next and the program ran but when I tried to start up I now get NTDLR missing and Ctrl/Alt/Del (but this message is in French!)

  I have reshered and found http://tinyempire.com/notes/ntldrismissing.htm this page I have creathed the iso cd disc tried all 10 options in normal mode and safe, but to no advail was the only option 2 would do nothing in normal mode and in safe mode would be a lot of code on screen then freezes after 7 seconds.

  I then http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ also got that drive and it ran into the maching now I get to Vista asking me to install I don't know if it's on the record or because I previously used the HP recovery disk to restore the system to the origional factory condition in any way when I try to install Vista I get the message

  "windows cannot open the required file F:\Sources\install.wim. The file does not exist. ........... "Error code: 0 x 80070002.

  If I click on repair the computer finds it on drive D: windows repair system (he is going through a test sequence and concluded

  root cause found:

  Disk system partition boot sector code is currupt.

  Repair action: repair boot sector

  Resuld .error code successfully completed 0x0

  time taken ms 4680

  I reboot the system and get

  The computer will restart unexpectly, or met an unexpected plant error.windows impossible proceed.to install windows, click ok to restart the computer, and then restart the installation

  What I do and it just restarts the same error message

  Help!

  I'm Ok with computers, but just in case I can't talk to me like I'm in baby so bad understands what you're on topic :)

  Thanks in advance

  Hello bizteck,

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. Insert the Windows Vista or Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted.
  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  4. Click repair your computer.
  5. Click the operating system you want to repair, and then click Next.
  6. In the System Recovery Options dialog box, click command prompt.
  7. Type Bootrec.exe, and then press ENTER.

  Note To start the computer from the Windows Vista or Windows 7 DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer. Bootrec.exe options tool The Bootrec.exe supports the following options. Use the option that suits your situation.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  • bcdedit/export C:\BCD_Backup
  • c:
  • Boot CD
  • BCD attrib s h - r
  • Ren c:\boot\bcd BCD.old
  • Bootrec /RebuildBcd

  / FixMbr option /FixMbr written a Windows 7 or Windows Vista compatible MBR on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR. / FixBoot option /FixBoot writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista or Windows 7. Use this option if one of the following conditions is met:

  • The boot sector has been replaced by a non-standard Windows Vista or Windows 7 boot sector.
  • The boot sector is damaged.
  • An earlier Windows operating system has been installed after the installation of Windows Vista or Windows 7. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

  / ScanOs option /ScanOs scans all disks for installations that are compatible with Windows Vista or Windows 7. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are facilities Windows Vista or Windows 7 that is not in the Boot Manager menu. / RebuildBcd /RebuildBcd option scans all disks for installations that are compatible with Windows Vista or Windows 7. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

  Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• iPhone save personalized answering machine message

  I forgot to go to save answering machine message on my iPhone 5 s
  Please help thanks in advance

  Go to the telephone-voice mail-> greeting >

• Mail is always "Download Messages".

  I noticed that Apple Mail is always "Download Messages".  This process will occur approximately every 10 minutes.  This is usually between 250 and 270 messages.  (screenshot)  However, there is no double or extra emails.  In addition, the number of downloaded emails usually does not change (perhaps by 1 or 2 later in the day).

  

  I have 4 email accounts in Mail, which are all Gmail accounts.  I went through each account settings and made sure they are all handled in the same way and have the same options are checked.

  I think I found the problem with account, because I tried with the right button and select "Take account offline" when I see that it starts to download the messages.  Once I have put offline, the download stops.  I tried to remove this suspected account and Add again, but it still does the same thing.  Any help would be appreciated!

  Hello and welcome to the communities of Apple support, ggerrits.

  If I understand your message just Mail on your Mac continues to show that it Downloads hundreds of mails every 10 minutes. I can certainly understand how she could become a nuisance to see permanently who warn even if no new messages are actually downloading. I'm happy to help him to stop appearing.

  You've done some excellent troubleshooting already to refine what e-mail account, what's happening with. The next thing that I recommend you do is to make sure that you run the version of OS X El Capitan, which should be 10.11.6. Using your Mac update, take a look at updating the software on your Mac. If you haven't done so already, I recommend also restart your Mac. Test the Mail after doing those two things.

  If the problem persists, follow these steps:

  1. With Mail open, select "Mail" in the upper left corner of your screen and select Preferences.
  2. Select the tab accounts.
  3. Select the e-mail account that you are having the problem with.
  4. Select the Advanced tab.
  5. Uncheck "automatically detect and manage account settings."

  Next, close and then restart Mail to see if you feel the same way.

  Thank you for using communities of Apple Support.

  Take care.

• Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

  Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

  Hello

  Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

  Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

  

  21:34 on Friday. 7 October 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  How can I get the messages appear when sent even if my phone is locked. I only get messages across when I activate the phone

  Settings > Notifications > Messages > display on the lock screen

• Why do I get a message saying that my computer is not registered for me

  I show the icon of the application that will not download because I get a message that says my computer it is not mine or is not saved for me.  WHY!

  What is the EXACT message you get?

• Messages will not open since macOS installation Sierra

  Hey all!

  I'm on a 2015 13 "Macbook Pro, only had it for a few months and have had no problems with it." Since the update, my Messages app will not work. Always worked well in the past, attempted to restart remove them the dock and everything but it wont open. Sometimes it loads a blank slate, but when I try to send a message it freezes and that he never sends. Every now and then, hours after the fact, I might have a new notification text top-right, but I am unable to open it.

  Safe Mode boot deletes some caches system that can help you and to update.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then, try the messaging app.

• How do you prevent Siri to send text messages?

  My children told me just show a problem with my iPhone 6 and Siri:

  My phone is locked, my child picks up the phone, press the home button and said "Send by David SMS", Siri let him write a voice message: "what is your social security number?   Siri sends, my other child shows me it seems I just send the message from my iPhone.

  David sends what looks like his social security number (it is not, we test all this), and the message appears on my locked iPhone.

  So if I left my phone sitting around, everyone could use Siri to do things like this for the information of anyone in my Contacts, even though I have a 6-digit code and fingerprints id put in place.

  What settings I need to change on my iPhone 6 to ensure that ever happening?

  Where they have found out about this: http://www.liveleak.com/view?i=c73_1475783202

  Post edited by: Phlac - add source my children found.

  Disable Siri "access on the lock screen.

  Settings > Siri

• How can I connect to a wifi network when I get the message 'safety recommendation' when I try to join?

  I have problems connecting to the WiFi at the hotel, as I have upgraded to iOS 10. When I try to join, I get a message "safety recommendation", and then it does nothing else. Prior to the update of the iOS, it would open an another Popup screen that lets me enter the password for the hotel but is not past with iOS 10. How do go?

  Please read use captives Wi - Fi networks on your iPhone, iPad or iPod touch - Apple Support.

  You may need to deselect Auto-Join and/or auto-connect on some networks in captivity. Otherwise, it may seem to connect for a second or two, only to disconnect immediately, leaving you without the possibility to open a session.

• All Gmail messages in subfolders missing

  I am using Mail version 10.0 on my iMac 27 inch 2015 Retina Display.  For some unknown reason, all the messages that I saved in these subfolders created self disappeared! The files are there but the messages are not. I used El Capitan, and have recently updated for Sierra, but the problem persists. The messages on my iPad, iPhone and Gmail.com. Any help would be appreciated.

  Hey Bitugs,

  Thank you for being a part of the communities of Apple Support.

  I understand your post inside files in your Gmail messages do not appear in the Mail on your Mac application, but they're appearing on your other devices and webmail.  To begin to solve this problem, I would rebuild you please your boxes mail:

  Mail for Mac: rebuild the mailboxes

  Take care.

• Messages: number, bad name right

  I just backed up my iPhone with iTunes 6 and restored my iPhone 7 from the back-up. Now, when I get a text message, it shows that it came from the phone number right but it displays the name of another contact. When I go to contacts, numbers and names are correct. How is what is happening and how to fix it?

  Problem solved:

  When you start the new phone he kept stuck on my iCloud password so I jumped this option. When the phone started, my iCloud showed I was connected and all my contacts were correct. I disconnected icloud, removed from the contacts to the new phone and re-connected to iCloud. Problem solved.

• error message when try to sync the iPhone, "invalid response from the device?

  What can I do when I receive this error message when you try to sync to my iPhone 5 s - "invalid response from the device?

  -What are your 5 updating to 10.0.2 iOS iPhone? If this is the case, you must have the latest version of iTunes on your computer, which is required for Mac OS X 10.9.5 12.5.1, or above. To meet these specifications will be receiving this error.